linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Jisheng Zhang <jszhang@kernel.org>, Guo Ren <guoren@kernel.org>,
	Fu Wei <wefu@redhat.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Drew Fustini <dfustini@baylibre.com>
Subject: [PATCH v2 3/8] riscv: dts: thead: Add TH1520 pin control nodes
Date: Wed,  3 Jan 2024 14:28:40 +0100	[thread overview]
Message-ID: <20240103132852.298964-4-emil.renner.berthing@canonical.com> (raw)
In-Reply-To: <20240103132852.298964-1-emil.renner.berthing@canonical.com>

Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
 .../boot/dts/thead/th1520-beaglev-ahead.dts   |  4 ++++
 .../dts/thead/th1520-lichee-module-4a.dtsi    |  4 ++++
 arch/riscv/boot/dts/thead/th1520.dtsi         | 24 +++++++++++++++++++
 3 files changed, 32 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 70e8042c8304..6c56318a8705 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -44,6 +44,10 @@ &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &apb_clk {
 	clock-frequency = <62500000>;
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index a802ab110429..9865925be372 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,6 +25,10 @@ &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &apb_clk {
 	clock-frequency = <62500000>;
 };
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index ba4d2c673ac8..e65a306ff575 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -134,6 +134,12 @@ osc_32k: 32k-oscillator {
 		#clock-cells = <0>;
 	};
 
+	aonsys_clk: aonsys-clk {
+		compatible = "fixed-clock";
+		clock-output-names = "aonsys_clk";
+		#clock-cells = <0>;
+	};
+
 	apb_clk: apb-clk-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "apb_clk";
@@ -242,6 +248,12 @@ portd: gpio-controller@0 {
 			};
 		};
 
+		padctrl1_apsys: pinctrl@ffe7f3c000 {
+			compatible = "thead,th1520-group2-pinctrl";
+			reg = <0xff 0xe7f3c000 0x0 0x1000>;
+			clocks = <&apb_clk>;
+		};
+
 		gpio0: gpio@ffec005000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xec005000 0x0 0x1000>;
@@ -278,6 +290,12 @@ portb: gpio-controller@0 {
 			};
 		};
 
+		padctrl0_apsys: pinctrl@ffec007000 {
+			compatible = "thead,th1520-group3-pinctrl";
+			reg = <0xff 0xec007000 0x0 0x1000>;
+			clocks = <&apb_clk>;
+		};
+
 		uart2: serial@ffec010000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xec010000 0x0 0x4000>;
@@ -414,6 +432,12 @@ porte: gpio-controller@0 {
 			};
 		};
 
+		padctrl_aosys: pinctrl@fffff4a000 {
+			compatible = "thead,th1520-group1-pinctrl";
+			reg = <0xff 0xfff4a000 0x0 0x2000>;
+			clocks = <&aonsys_clk>;
+		};
+
 		ao_gpio1: gpio@fffff52000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xfff52000 0x0 0x1000>;
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2024-01-03 13:29 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-03 13:28 [PATCH v2 0/8] Add T-Head TH1520 SoC pin control Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 1/8] dt-bindings: pinctrl: Add thead,th1520-pinctrl bindings Emil Renner Berthing
2024-01-15 17:36   ` Rob Herring
2024-05-17 12:48     ` Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 2/8] pinctrl: Add driver for the T-Head TH1520 SoC Emil Renner Berthing
2024-01-27 23:02   ` Linus Walleij
2024-05-11  6:06   ` Andy Shevchenko
2024-01-03 13:28 ` Emil Renner Berthing [this message]
2024-01-08 17:34   ` [PATCH v2 3/8] riscv: dts: thead: Add TH1520 pin control nodes Conor Dooley
2024-01-09 12:02     ` Emil Renner Berthing
2024-01-09 13:04       ` Conor Dooley
2024-01-09 14:28         ` Emil Renner Berthing
2024-01-09 17:34           ` Conor Dooley
2024-01-09 18:30             ` Drew Fustini
2024-01-03 13:28 ` [PATCH v2 4/8] riscv: dts: thead: Add TH1520 GPIO ranges Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 5/8] riscv: dts: thead: Adjust TH1520 GPIO labels Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 6/8] riscv: dts: thead: Add Lichee Pi 4M GPIO line names Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 7/8] riscv: dts: thead: Add TH1520 pinctrl settings for UART0 Emil Renner Berthing
2024-01-03 13:28 ` [PATCH v2 8/8] riscv: dtb: thead: Add BeagleV Ahead LEDs Emil Renner Berthing
2024-02-06 19:25 ` [PATCH v2 0/8] Add T-Head TH1520 SoC pin control Conor Dooley
2024-05-06 14:28 ` Thomas Bonnefille

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240103132852.298964-4-emil.renner.berthing@canonical.com \
    --to=emil.renner.berthing@canonical.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dfustini@baylibre.com \
    --cc=guoren@kernel.org \
    --cc=jszhang@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=wefu@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).