linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Samuel Holland <samuel.holland@sifive.com>
To: Palmer Dabbelt <palmer@dabbelt.com>, linux-riscv@lists.infradead.org
Cc: devicetree@vger.kernel.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	linux-kernel@vger.kernel.org, tech-j-ext@lists.risc-v.org,
	Conor Dooley <conor@kernel.org>,
	kasan-dev@googlegroups.com, Evgenii Stepanov <eugenis@google.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Samuel Holland <samuel.holland@sifive.com>,
	Guo Ren <guoren@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Stefan Roesch <shr@devkernel.io>
Subject: [RFC PATCH 6/9] riscv: Add support for userspace pointer masking
Date: Tue, 19 Mar 2024 14:58:32 -0700	[thread overview]
Message-ID: <20240319215915.832127-7-samuel.holland@sifive.com> (raw)
In-Reply-To: <20240319215915.832127-1-samuel.holland@sifive.com>

RISC-V supports pointer masking with a variable number of tag bits
("PMLEN") and which is configured at the next higher privilege level.

Wire up the PR_SET_TAGGED_ADDR_CTRL and PR_GET_TAGGED_ADDR_CTRL prctls
so userspace can request a minimum number of tag bits and determine the
actual number of tag bits. As with PR_TAGGED_ADDR_ENABLE, the pointer
masking configuration is thread-scoped, inherited on clone() and fork()
and cleared on exec().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
---

 arch/riscv/Kconfig                 |   8 +++
 arch/riscv/include/asm/processor.h |   8 +++
 arch/riscv/kernel/process.c        | 107 +++++++++++++++++++++++++++++
 include/uapi/linux/prctl.h         |   3 +
 4 files changed, 126 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e3142ce531a0..a1a1585120f0 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -479,6 +479,14 @@ config RISCV_ISA_C
 
 	  If you don't know what to do here, say Y.
 
+config RISCV_ISA_POINTER_MASKING
+	bool "Smmpm, Smnpm, and Ssnpm extensions for pointer masking"
+	depends on 64BIT
+	default y
+	help
+	  Add support to dynamically detect the presence of the Smmpm, Smnpm,
+	  and Ssnpm extensions (pointer masking) and enable their usage.
+
 config RISCV_ISA_SVNAPOT
 	bool "Svnapot extension support for supervisor mode NAPOT pages"
 	depends on 64BIT && MMU
diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 06b87402a4d8..64b34e839802 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -185,6 +185,14 @@ extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
 #define GET_UNALIGN_CTL(tsk, addr)	get_unalign_ctl((tsk), (addr))
 #define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
 
+#ifdef CONFIG_RISCV_ISA_POINTER_MASKING
+/* PR_{SET,GET}_TAGGED_ADDR_CTRL prctl */
+long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg);
+long get_tagged_addr_ctrl(struct task_struct *task);
+#define SET_TAGGED_ADDR_CTRL(arg)	set_tagged_addr_ctrl(current, arg)
+#define GET_TAGGED_ADDR_CTRL()		get_tagged_addr_ctrl(current)
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_RISCV_PROCESSOR_H */
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 92922dbd5b5c..3578e75f4aa4 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -7,6 +7,7 @@
  * Copyright (C) 2017 SiFive
  */
 
+#include <linux/bitfield.h>
 #include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -154,6 +155,18 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
 #endif
 }
 
+static void flush_tagged_addr_state(void)
+{
+#ifdef CONFIG_RISCV_ISA_POINTER_MASKING
+	if (!riscv_has_extension_unlikely(RISCV_ISA_EXT_SxNPM))
+		return;
+
+	current->thread.envcfg &= ~ENVCFG_PMM;
+
+	sync_envcfg(current);
+#endif
+}
+
 void flush_thread(void)
 {
 #ifdef CONFIG_FPU
@@ -173,6 +186,7 @@ void flush_thread(void)
 	memset(&current->thread.vstate, 0, sizeof(struct __riscv_v_ext_state));
 	clear_tsk_thread_flag(current, TIF_RISCV_V_DEFER_RESTORE);
 #endif
+	flush_tagged_addr_state();
 }
 
 void arch_release_task_struct(struct task_struct *tsk)
@@ -236,3 +250,96 @@ void __init arch_task_cache_init(void)
 {
 	riscv_v_setup_ctx_cache();
 }
+
+#ifdef CONFIG_RISCV_ISA_POINTER_MASKING
+static bool have_user_pmlen_7;
+static bool have_user_pmlen_16;
+
+long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg)
+{
+	unsigned long valid_mask = PR_PMLEN_MASK;
+	struct thread_info *ti = task_thread_info(task);
+	u8 pmlen;
+
+	if (is_compat_thread(ti))
+		return -EINVAL;
+
+	if (arg & ~valid_mask)
+		return -EINVAL;
+
+	pmlen = FIELD_GET(PR_PMLEN_MASK, arg);
+	if (pmlen > 16) {
+		return -EINVAL;
+	} else if (pmlen > 7) {
+		if (have_user_pmlen_16)
+			pmlen = 16;
+		else
+			return -EINVAL;
+	} else if (pmlen > 0) {
+		/*
+		 * Prefer the smallest PMLEN that satisfies the user's request,
+		 * in case choosing a larger PMLEN has a performance impact.
+		 */
+		if (have_user_pmlen_7)
+			pmlen = 7;
+		else if (have_user_pmlen_16)
+			pmlen = 16;
+		else
+			return -EINVAL;
+	}
+
+	task->thread.envcfg &= ~ENVCFG_PMM;
+	if (pmlen == 7)
+		task->thread.envcfg |= ENVCFG_PMM_PMLEN_7;
+	else if (pmlen == 16)
+		task->thread.envcfg |= ENVCFG_PMM_PMLEN_16;
+
+	if (task == current)
+		sync_envcfg(current);
+
+	return 0;
+}
+
+long get_tagged_addr_ctrl(struct task_struct *task)
+{
+	struct thread_info *ti = task_thread_info(task);
+	long ret = 0;
+
+	if (is_compat_thread(ti))
+		return -EINVAL;
+
+	switch (task->thread.envcfg & ENVCFG_PMM) {
+	case ENVCFG_PMM_PMLEN_7:
+		ret |= FIELD_PREP(PR_PMLEN_MASK, 7);
+		break;
+	case ENVCFG_PMM_PMLEN_16:
+		ret |= FIELD_PREP(PR_PMLEN_MASK, 16);
+		break;
+	}
+
+	return ret;
+}
+
+static bool try_to_set_pmm(unsigned long value)
+{
+	csr_set(CSR_ENVCFG, value);
+	return (csr_read_clear(CSR_ENVCFG, ENVCFG_PMM) & ENVCFG_PMM) == value;
+}
+
+static int __init tagged_addr_init(void)
+{
+	if (!riscv_has_extension_unlikely(RISCV_ISA_EXT_SxNPM))
+		return 0;
+
+	/*
+	 * envcfg.PMM is a WARL field. Detect which values are supported.
+	 * Assume the supported PMLEN values are the same on all harts.
+	 */
+	csr_clear(CSR_ENVCFG, ENVCFG_PMM);
+	have_user_pmlen_7 = try_to_set_pmm(ENVCFG_PMM_PMLEN_7);
+	have_user_pmlen_16 = try_to_set_pmm(ENVCFG_PMM_PMLEN_16);
+
+	return 0;
+}
+core_initcall(tagged_addr_init);
+#endif	/* CONFIG_RISCV_ISA_POINTER_MASKING */
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 370ed14b1ae0..488b0d8e8495 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -244,6 +244,9 @@ struct prctl_mm_map {
 # define PR_MTE_TAG_MASK		(0xffffUL << PR_MTE_TAG_SHIFT)
 /* Unused; kept only for source compatibility */
 # define PR_MTE_TCF_SHIFT		1
+/* RISC-V pointer masking tag length */
+# define PR_PMLEN_SHIFT			24
+# define PR_PMLEN_MASK			(0x7fUL << PR_PMLEN_SHIFT)
 
 /* Control reclaim behavior when allocating memory */
 #define PR_SET_IO_FLUSHER		57
-- 
2.43.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2024-03-19 21:59 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-19 21:58 [RFC PATCH 0/9] riscv: Userspace pointer masking and tagged address ABI Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 1/9] dt-bindings: riscv: Add pointer masking ISA extensions Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 2/9] riscv: Add ISA extension parsing for pointer masking Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 3/9] riscv: Add CSR definitions " Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 4/9] riscv: Define is_compat_thread() Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits Samuel Holland
2024-03-19 23:55   ` [RISC-V] [tech-j-ext] " Deepak Gupta
2024-03-20  2:20     ` Samuel Holland
2024-03-20  4:39       ` Deepak Gupta
2024-03-22  0:13         ` Samuel Holland
2024-03-22 17:13           ` Deepak Gupta
2024-03-23  9:35             ` Andrew Jones
2024-03-23 20:37               ` Deepak Gupta
2024-03-22  8:09         ` Andrew Jones
2024-03-22 16:52           ` Deepak Gupta
2024-03-20  8:06       ` Conor Dooley
     [not found]       ` <17BE5F38AFE245E5.29196@lists.riscv.org>
2024-03-20 23:27         ` Deepak Gupta
2024-03-22  3:43           ` Samuel Holland
2024-03-22  7:58       ` Andrew Jones
2024-03-28  1:58       ` Deepak Gupta
     [not found]       ` <17C0CB122DBB0EAE.6770@lists.riscv.org>
2024-03-28 19:34         ` Deepak Gupta
2024-03-19 21:58 ` Samuel Holland [this message]
2024-03-19 21:58 ` [RFC PATCH 7/9] riscv: Add support for the tagged address ABI Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 8/9] riscv: Allow ptrace control of " Samuel Holland
2024-03-19 21:58 ` [RFC PATCH 9/9] selftests: riscv: Add a pointer masking test Samuel Holland
2024-03-20 17:21   ` Conor Dooley
2024-03-20 18:04     ` Samuel Holland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240319215915.832127-7-samuel.holland@sifive.com \
    --to=samuel.holland@sifive.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eugenis@google.com \
    --cc=guoren@kernel.org \
    --cc=kasan-dev@googlegroups.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=shr@devkernel.io \
    --cc=tech-j-ext@lists.risc-v.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).