linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Greentime Hu <greentime.hu@sifive.com>
To: greentime.hu@sifive.com, paul.walmsley@sifive.com,
	hes@sifive.com, erik.danie@sifive.com, zong.li@sifive.com,
	bhelgaas@google.com, robh+dt@kernel.org, palmer@dabbelt.com,
	aou@eecs.berkeley.edu, mturquette@baylibre.com, sboyd@kernel.org,
	lorenzo.pieralisi@arm.com, p.zabel@pengutronix.de,
	alex.dewar90@gmail.com, khilman@baylibre.com,
	hayashi.kunihiko@socionext.com, vidyas@nvidia.com,
	jh80.chung@samsung.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	helgaas@kernel.org
Subject: [PATCH v2 5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver
Date: Thu, 18 Mar 2021 14:08:12 +0800	[thread overview]
Message-ID: <27f491c113e1bb369d25aca02571b34422986142.1615954046.git.greentime.hu@sifive.com> (raw)
In-Reply-To: <cover.1615954045.git.greentime.hu@sifive.com>

From: Paul Walmsley <paul.walmsley@sifive.com>

Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Co-developed-by: Henry Styles <hes@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
---
 drivers/pci/controller/dwc/Kconfig      |   9 +
 drivers/pci/controller/dwc/Makefile     |   1 +
 drivers/pci/controller/dwc/pcie-fu740.c | 324 ++++++++++++++++++++++++
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-fu740.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 22c5529e9a65..0a37d21ed64e 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -318,4 +318,13 @@ config PCIE_AL
 	  required only for DT-based platforms. ACPI platforms with the
 	  Annapurna Labs PCIe controller don't need to enable this.
 
+config PCIE_FU740
+	bool "SiFive FU740 PCIe host controller"
+	depends on PCI_MSI_IRQ_DOMAIN
+	depends on SOC_SIFIVE || COMPILE_TEST
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support for the SiFive
+	  FU740.
+
 endmenu
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..625f6aaeb5b8 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
 obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
new file mode 100644
index 000000000000..65ca4c212fc3
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FU740 DesignWare PCIe Controller integration
+ * Copyright (C) 2019-2021 SiFive, Inc.
+ * Paul Walmsley
+ * Greentime Hu
+ *
+ * Based in part on the i.MX6 PCIe host controller shim which is:
+ *
+ * Copyright (C) 2013 Kosagi
+ *		https://www.kosagi.com
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/reset.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include "pcie-designware.h"
+
+#define to_fu740_pcie(x)	dev_get_drvdata((x)->dev)
+
+struct fu740_pcie {
+	struct dw_pcie pci;
+	void __iomem *mgmt_base;
+	struct gpio_desc *perstn;
+	struct gpio_desc *pwren;
+	struct clk *pcie_aux;
+	struct reset_control *rst;
+};
+
+#define SIFIVE_DEVICESRESETREG		0x28
+
+#define PCIEX8MGMT_PERST_N		0x0
+#define PCIEX8MGMT_APP_LTSSM_ENABLE	0x10
+#define PCIEX8MGMT_APP_HOLD_PHY_RST	0x18
+#define PCIEX8MGMT_DEVICE_TYPE		0x708
+#define PCIEX8MGMT_PHY0_CR_PARA_ADDR	0x860
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_EN	0x870
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_DATA	0x878
+#define PCIEX8MGMT_PHY0_CR_PARA_SEL	0x880
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_DATA	0x888
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_EN	0x890
+#define PCIEX8MGMT_PHY0_CR_PARA_ACK	0x898
+#define PCIEX8MGMT_PHY1_CR_PARA_ADDR	0x8a0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_EN	0x8b0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_DATA	0x8b8
+#define PCIEX8MGMT_PHY1_CR_PARA_SEL	0x8c0
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_DATA	0x8c8
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_EN	0x8d0
+#define PCIEX8MGMT_PHY1_CR_PARA_ACK	0x8d8
+
+#define PCIEX8MGMT_PHY_CDR_TRACK_EN	BIT(0)
+#define PCIEX8MGMT_PHY_LOS_THRSHLD	BIT(5)
+#define PCIEX8MGMT_PHY_TERM_EN		BIT(9)
+#define PCIEX8MGMT_PHY_TERM_ACDC	BIT(10)
+#define PCIEX8MGMT_PHY_EN		BIT(11)
+#define PCIEX8MGMT_PHY_INIT_VAL		(PCIEX8MGMT_PHY_CDR_TRACK_EN|\
+					 PCIEX8MGMT_PHY_LOS_THRSHLD|\
+					 PCIEX8MGMT_PHY_TERM_EN|\
+					 PCIEX8MGMT_PHY_TERM_ACDC|\
+					 PCIEX8MGMT_PHY_EN)
+
+#define PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3	0x1008
+#define PCIEX8MGMT_PHY_LANE_OFF		0x100
+#define PCIEX8MGMT_PHY_LANE0_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 0)
+#define PCIEX8MGMT_PHY_LANE1_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 1)
+#define PCIEX8MGMT_PHY_LANE2_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 2)
+#define PCIEX8MGMT_PHY_LANE3_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 3)
+
+static void fu740_pcie_assert_perstn(struct fu740_pcie *afp)
+{
+	/* Assert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->perstn, 0);
+	/* Assert controller PERST_N */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+}
+
+static void fu740_pcie_deassert_perstn(struct fu740_pcie *afp)
+{
+	/* Deassert controller PERST_N */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+	/* Deassert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->perstn, 1);
+}
+
+static void fu740_pcie_power_on(struct fu740_pcie *afp)
+{
+	gpiod_set_value_cansleep(afp->pwren, 1);
+	/*
+	 * Ensure that PERST has been asserted for at least 100 ms.
+	 * Section 2.2 of PCI Express Card Electromechanical Specification
+	 * Revision 3.0
+	 */
+	msleep(100);
+}
+
+static void fu740_pcie_drive_perstn(struct fu740_pcie *afp)
+{
+	fu740_pcie_assert_perstn(afp);
+	fu740_pcie_power_on(afp);
+	fu740_pcie_deassert_perstn(afp);
+}
+
+static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr,
+			      const uint16_t wrdata, struct fu740_pcie *afp)
+{
+	struct device *dev = afp->pci.dev;
+	void __iomem *phy_cr_para_addr;
+	void __iomem *phy_cr_para_wr_data;
+	void __iomem *phy_cr_para_wr_en;
+	void __iomem *phy_cr_para_ack;
+	int ret, val;
+
+	/* Setup */
+	if (phy) {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK;
+	} else {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK;
+	}
+
+	writel_relaxed(addr, phy_cr_para_addr);
+	writel_relaxed(wrdata, phy_cr_para_wr_data);
+	writel_relaxed(1, phy_cr_para_wr_en);
+
+	/* Wait for wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000);
+	if (ret)
+		dev_err(dev, "Wait for wait_ilde state failed!\n");
+
+	/* Clear */
+	writel_relaxed(0, phy_cr_para_wr_en);
+
+	/* Wait for ~wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10, 5000);
+	if (ret)
+		dev_err(dev, "Wait for !wait_ilde state failed!\n");
+}
+
+static void fu740_pcie_init_phy(struct fu740_pcie *afp)
+{
+	/* Enable phy cr_para_sel interfaces */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_SEL);
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_SEL);
+
+	/*
+	 * Wait 10 cr_para cycles to guarantee that the registers are ready
+	 * to be edited.
+	 */
+	ndelay(10);
+
+	/* Set PHY AC termination mode */
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+}
+
+static void fu740_pcie_ltssm_enable(struct device *dev)
+{
+	struct fu740_pcie *afp = dev_get_drvdata(dev);
+
+	/* Enable LTSSM */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
+}
+
+static int fu740_pcie_start_link(struct dw_pcie *pci)
+{
+	struct device *dev = pci->dev;
+
+	/* Start LTSSM. */
+	fu740_pcie_ltssm_enable(dev);
+	return 0;
+}
+
+static int fu740_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct fu740_pcie *afp = to_fu740_pcie(pci);
+	struct device *dev = pci->dev;
+	int ret;
+
+	/* Power on reset */
+	fu740_pcie_drive_perstn(afp);
+
+	/* Enable pcieauxclk */
+	ret = clk_prepare_enable(afp->pcie_aux);
+	if (ret)
+		dev_err(dev, "unable to enable pcie_aux clock\n");
+
+	/*
+	 * Assert hold_phy_rst (hold the controller LTSSM in reset after
+	 * power_up_rst_n for register programming with cr_para)
+	 */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+
+	/* Deassert power_up_rst_n */
+	ret = reset_control_deassert(afp->rst);
+	if (ret)
+		dev_err(dev, "unable to deassert pcie_power_up_rst_n\n");
+
+	fu740_pcie_init_phy(afp);
+
+	/* Disable pcieauxclk */
+	clk_disable_unprepare(afp->pcie_aux);
+	/* Clear hold_phy_rst */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+	/* Enable pcieauxclk */
+	ret = clk_prepare_enable(afp->pcie_aux);
+	/* Set RC mode */
+	writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);
+
+	return 0;
+}
+
+static const struct dw_pcie_host_ops fu740_pcie_host_ops = {
+	.host_init = fu740_pcie_host_init,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = fu740_pcie_start_link,
+};
+
+static int fu740_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct fu740_pcie *afp;
+	int ret;
+
+	afp = devm_kzalloc(dev, sizeof(*afp), GFP_KERNEL);
+	if (!afp)
+		return -ENOMEM;
+	pci = &afp->pci;
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+	pci->pp.ops = &fu740_pcie_host_ops;
+
+	/* SiFive specific region: mgmt */
+	afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt");
+	if (IS_ERR(afp->mgmt_base))
+		return PTR_ERR(afp->mgmt_base);
+
+	/* Fetch GPIOs */
+	afp->perstn = devm_gpiod_get_optional(dev, "perstn-gpios", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->perstn)) {
+		dev_err(dev, "unable to get perstn-gpios\n");
+		return ret;
+	}
+	afp->pwren = devm_gpiod_get_optional(dev, "pwren-gpios", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->pwren)) {
+		dev_err(dev, "unable to get pwren-gpios\n");
+		return ret;
+	}
+
+	/* Fetch clocks */
+	afp->pcie_aux = devm_clk_get(dev, "pcie_aux");
+	if (IS_ERR(afp->pcie_aux))
+		return dev_err_probe(dev, PTR_ERR(afp->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
+
+	/* Fetch reset */
+	afp->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(afp->rst))
+		return dev_err_probe(dev, PTR_ERR(afp->rst), "unable to get reset\n");
+
+	platform_set_drvdata(pdev, afp);
+
+	ret = dw_pcie_host_init(&pci->pp);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void fu740_pcie_shutdown(struct platform_device *pdev)
+{
+	struct fu740_pcie *afp = platform_get_drvdata(pdev);
+
+	/* Bring down link, so bootloader gets clean state in case of reboot */
+	fu740_pcie_assert_perstn(afp);
+}
+
+static const struct of_device_id fu740_pcie_of_match[] = {
+	{ .compatible = "sifive,fu740-pcie", },
+	{},
+};
+
+static struct platform_driver fu740_pcie_driver = {
+	.driver = {
+		   .name = "fu740-pcie",
+		   .of_match_table = fu740_pcie_of_match,
+		   .suppress_bind_attrs = true,
+	},
+	.probe = fu740_pcie_probe,
+	.shutdown = fu740_pcie_shutdown,
+};
+
+builtin_platform_driver(fu740_pcie_driver);
-- 
2.30.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2021-03-18  6:09 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-18  6:08 [PATCH v2 0/6] Add SiFive FU740 PCIe host controller driver support Greentime Hu
2021-03-18  6:08 ` [PATCH v2 1/6] clk: sifive: Add pcie_aux clock in prci driver for PCIe driver Greentime Hu
2021-03-18  6:08 ` [PATCH v2 2/6] clk: sifive: Use reset-simple " Greentime Hu
2021-03-29 19:14   ` Stephen Boyd
2021-03-30  3:36     ` Greentime Hu
2021-03-31  0:24       ` Palmer Dabbelt
2021-03-18  6:08 ` [PATCH v2 3/6] MAINTAINERS: Add maintainers for SiFive FU740 " Greentime Hu
2021-03-18  6:08 ` [PATCH v2 4/6] dt-bindings: PCI: Add SiFive FU740 PCIe host controller Greentime Hu
2021-03-19  3:56   ` Krzysztof Wilczyński
2021-03-19 21:49   ` Rob Herring
2021-03-23 20:35   ` Rob Herring
2021-03-29  3:39     ` Greentime Hu
2021-03-18  6:08 ` Greentime Hu [this message]
2021-03-19  4:37   ` [PATCH v2 5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver Krzysztof Wilczyński
2021-03-19  4:42     ` Krzysztof Wilczyński
2021-03-18  6:08 ` [PATCH v2 6/6] riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC Greentime Hu
2021-03-31  0:24   ` Palmer Dabbelt
2021-04-19  2:43     ` Greentime Hu
2021-04-19  2:48       ` Greentime Hu
2021-03-29 19:12 ` [PATCH v2 0/6] Add SiFive FU740 PCIe host controller driver support Stephen Boyd
2021-04-01  6:16   ` Greentime Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=27f491c113e1bb369d25aca02571b34422986142.1615954046.git.greentime.hu@sifive.com \
    --to=greentime.hu@sifive.com \
    --cc=alex.dewar90@gmail.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=erik.danie@sifive.com \
    --cc=hayashi.kunihiko@socionext.com \
    --cc=helgaas@kernel.org \
    --cc=hes@sifive.com \
    --cc=jh80.chung@samsung.com \
    --cc=khilman@baylibre.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=vidyas@nvidia.com \
    --cc=zong.li@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).