From: Guenter Roeck <linux@roeck-us.net>
To: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-usb@vger.kernel.org,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Sam Ravnborg <sam@ravnborg.org>,
linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
Viresh Kumar <vireshk@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-pci@vger.kernel.org, dri-devel@lists.freedesktop.org,
Sebastian Reichel <sre@kernel.org>,
linux-ide@vger.kernel.org,
Thierry Reding <thierry.reding@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Pavel Machek <pavel@ucw.cz>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-riscv@lists.infradead.org, Lee Jones <lee.jones@linaro.org>,
linux-clk@vger.kernel.org, linux-leds@vger.kernel.org,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-rtc@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
Marc Zyngier <maz@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
linux-mips@vger.kernel.org,
Vivien Didelot <vivien.didelot@gmail.com>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-media@vger.kernel.org, linux-hwmon@vger.kernel.org,
Albert Ou <aou@eecs.berkeley.edu>,
Jason Cooper <jason@lakedaemon.net>,
linux-pm@vger.kernel.org, linux-can@vger.kernel.org,
linux-gpio@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Paul Walmsley <paul.walmsley@sifive.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Jens Axboe <axboe@kernel.dk>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-watchdog@vger.kernel.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-mmc@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Richard Weinberger <richard@nod.at>,
dmaengine@vger.kernel.org, linux-mtd@lists.infradead.org,
"David S. Miller" <davem@davemloft.net>,
Jonathan Cameron <jic23@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
Date: Tue, 6 Oct 2020 07:30:42 -0700 [thread overview]
Message-ID: <83e74e8b-02ba-85a2-dda5-531dae6a3601@roeck-us.net> (raw)
In-Reply-To: <20201005183830.486085-5-robh@kernel.org>
On 10/5/20 11:38 AM, Rob Herring wrote:
> In order to add meta-schema checks for additional/unevaluatedProperties
> being present, all schema need to make this explicit. As common/shared
> schema are included by other schemas, they should always allow for
> additionalProperties.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/arm/cpus.yaml | 2 ++
> .../devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml | 2 ++
> Documentation/devicetree/bindings/ata/pata-common.yaml | 2 ++
> Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++
> Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++
> .../devicetree/bindings/chrome/google,cros-ec-typec.yaml | 2 ++
> .../devicetree/bindings/connector/usb-connector.yaml | 2 ++
> .../devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml | 2 ++
> .../devicetree/bindings/display/dsi-controller.yaml | 2 ++
> Documentation/devicetree/bindings/display/panel/lvds.yaml | 2 ++
> .../devicetree/bindings/display/panel/panel-common.yaml | 2 ++
> Documentation/devicetree/bindings/dma/dma-common.yaml | 2 ++
> Documentation/devicetree/bindings/dma/dma-controller.yaml | 2 ++
> Documentation/devicetree/bindings/dma/dma-router.yaml | 2 ++
> Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++
> .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 5 ++++-
> Documentation/devicetree/bindings/iio/common.yaml | 2 ++
> Documentation/devicetree/bindings/input/input.yaml | 2 ++
> Documentation/devicetree/bindings/input/matrix-keymap.yaml | 2 ++
> .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 2 ++
> Documentation/devicetree/bindings/leds/common.yaml | 2 ++
> .../devicetree/bindings/leds/leds-class-multicolor.yaml | 3 +++
> Documentation/devicetree/bindings/leds/trigger-source.yaml | 2 ++
> Documentation/devicetree/bindings/media/rc.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/syscon.yaml | 2 +-
> Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++
> .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++
> Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++
> .../devicetree/bindings/net/can/can-transceiver.yaml | 2 ++
> Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 ++
> .../devicetree/bindings/net/ethernet-controller.yaml | 2 ++
> Documentation/devicetree/bindings/net/ethernet-phy.yaml | 2 ++
> Documentation/devicetree/bindings/net/mdio.yaml | 2 ++
> Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++
> Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++
> Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
> Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml | 2 ++
> Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml | 2 ++
> Documentation/devicetree/bindings/pci/cdns-pcie.yaml | 2 ++
> Documentation/devicetree/bindings/pci/pci-ep.yaml | 2 ++
> Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml | 2 ++
> Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 2 ++
> Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml | 2 ++
> Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++
> .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++
> Documentation/devicetree/bindings/pwm/pwm.yaml | 2 ++
> Documentation/devicetree/bindings/regulator/regulator.yaml | 2 ++
> Documentation/devicetree/bindings/regulator/wlf,arizona.yaml | 2 ++
> Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/rtc.yaml | 2 ++
> Documentation/devicetree/bindings/serial/rs485.yaml | 3 +++
> Documentation/devicetree/bindings/serial/serial.yaml | 2 ++
> Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 2 ++
> Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++
> Documentation/devicetree/bindings/sound/cirrus,madera.yaml | 2 ++
> .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 3 +++
> Documentation/devicetree/bindings/sound/wlf,arizona.yaml | 2 ++
> .../devicetree/bindings/soundwire/soundwire-controller.yaml | 2 ++
> Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 ++
> Documentation/devicetree/bindings/spmi/spmi.yaml | 2 ++
> .../devicetree/bindings/thermal/thermal-cooling-devices.yaml | 2 ++
> .../devicetree/bindings/thermal/thermal-sensor.yaml | 2 ++
> Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 2 ++
> Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 ++
> Documentation/devicetree/bindings/watchdog/watchdog.yaml | 2 ++
For watchdog:
Acked-by: Guenter Roeck <linux@roeck-us.net>
> 65 files changed, 134 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 1222bf1831fa..14cd727d3c4b 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -341,6 +341,8 @@ required:
> dependencies:
> rockchip,pmu: [enable-method]
>
> +additionalProperties: true
> +
> examples:
> - |
> cpus {
> diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
> index 1043e4be4fca..c9675c4cdc1b 100644
> --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
> +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
> @@ -30,6 +30,8 @@ properties:
> Specifies the bpmp node that needs to be queried to get
> operating point data for all CPUs.
>
> +additionalProperties: true
> +
> examples:
> - |
> cpus {
> diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
> index fc5ebbe7108d..2412894a255d 100644
> --- a/Documentation/devicetree/bindings/ata/pata-common.yaml
> +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
> @@ -47,4 +47,6 @@ patternProperties:
> The ID number of the drive port, 0 for the master port and 1 for the
> slave port.
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
> index 6783a4dec6b5..7ac77b1c5850 100644
> --- a/Documentation/devicetree/bindings/ata/sata-common.yaml
> +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
> @@ -47,4 +47,6 @@ patternProperties:
> multiplier making it possible to connect up to 15 disks to a single
> SATA port.
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
> index 33326ffdb266..182134d7a6a3 100644
> --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
> +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
> @@ -61,6 +61,8 @@ anyOf:
> - required:
> - power-domains
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-msm8996.h>
> diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> index 6d7396ab8bee..2d98f7c4d3bc 100644
> --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> @@ -26,6 +26,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: true #fixme
> +
> examples:
> - |+
> spi0 {
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> index dc6ff64422d4..f037d65b018e 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -172,6 +172,8 @@ allOf:
> type:
> const: micro
>
> +additionalProperties: true
> +
> examples:
> # Micro-USB connector with HS lines routed via controller (MUIC).
> - |
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> index 012aa8e7cb8c..e42cb610f545 100644
> --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> @@ -66,3 +66,5 @@ required:
> - clocks
> - ports
> - reg
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
> index a02039e3aca0..ca21671f6bdd 100644
> --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
> @@ -73,6 +73,8 @@ patternProperties:
> required:
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> index 946dd354256c..31164608ba1d 100644
> --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> @@ -112,4 +112,6 @@ oneOf:
> - required:
> - ports
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> index 45fe8fe5faba..cd6dc5461721 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> @@ -163,4 +163,6 @@ dependencies:
> width-mm: [ height-mm ]
> height-mm: [ width-mm ]
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
> index c36592683340..307b499e8968 100644
> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
> @@ -49,3 +49,5 @@ properties:
>
> required:
> - "#dma-cells"
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
> index c39f6de76670..0043b91da95e 100644
> --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml
> +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
> @@ -17,6 +17,8 @@ properties:
> $nodename:
> pattern: "^dma-controller(@.*)?$"
>
> +additionalProperties: true
> +
> examples:
> - |
> dma: dma-controller@48000000 {
> diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
> index 5b5f07393135..4cee5667b8a8 100644
> --- a/Documentation/devicetree/bindings/dma/dma-router.yaml
> +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
> @@ -36,6 +36,8 @@ required:
> - "#dma-cells"
> - dma-masters
>
> +additionalProperties: true
> +
> examples:
> - |
> sdma_xbar: dma-router@4a002b78 {
> diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> index f9845dc2f5ae..5fe784f487c5 100644
> --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> @@ -123,3 +123,5 @@ properties:
> $ref: "/schemas/types.yaml#/definitions/uint32"
> minimum: 0
> maximum: 3
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> index 16d76482b4ff..cfb66ba45ee8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> @@ -46,6 +46,8 @@ properties:
> "#io-channel-cells":
> const: 1
>
> + io-channel-ranges: true
> +
> vdd-supply: true
>
> samsung,syscon-phandle:
> @@ -107,7 +109,8 @@ allOf:
> items:
> - const: adc
>
> -additionalProperties: false
> +additionalProperties:
> + type: object
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
> index 97ffcb77043d..f845b41d74c4 100644
> --- a/Documentation/devicetree/bindings/iio/common.yaml
> +++ b/Documentation/devicetree/bindings/iio/common.yaml
> @@ -32,4 +32,6 @@ properties:
> considered 'near' to the device (an object is near to the
> sensor).
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
> index 8edcb3c31270..ab407f266bef 100644
> --- a/Documentation/devicetree/bindings/input/input.yaml
> +++ b/Documentation/devicetree/bindings/input/input.yaml
> @@ -33,3 +33,5 @@ properties:
> power off automatically. Device with key pressed shutdown feature can
> specify this property.
> $ref: /schemas/types.yaml#/definitions/uint32
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> index c3bf09156783..6699d5e32dca 100644
> --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> @@ -35,6 +35,8 @@ properties:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: Number of column lines connected to the keypad controller.
>
> +additionalProperties: true
> +
> examples:
> - |
> keypad {
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> index 36dc7b56a453..a771a15f053f 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> @@ -81,3 +81,5 @@ dependencies:
> touchscreen-size-y: [ touchscreen-size-x ]
> touchscreen-x-mm: [ touchscreen-y-mm ]
> touchscreen-y-mm: [ touchscreen-x-mm ]
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index a2a541bca73c..08b6700ca61e 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -156,6 +156,8 @@ properties:
> Maximum timeout in microseconds after which the flash LED is turned off.
> Required for flash LED nodes with configurable timeout.
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
> index b55e1f1308a4..b1a53f054b89 100644
> --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
> @@ -34,4 +34,7 @@ patternProperties:
>
> required:
> - color
> +
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml
> index 0618003e40bd..89a1cde2b8aa 100644
> --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml
> +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml
> @@ -21,4 +21,6 @@ properties:
> trigger sources (e.g. a specific USB port).
> enum: [ 0, 1 ]
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
> index ded2ac43237d..8ad2cba5f61f 100644
> --- a/Documentation/devicetree/bindings/media/rc.yaml
> +++ b/Documentation/devicetree/bindings/media/rc.yaml
> @@ -150,3 +150,5 @@ properties:
> - rc-x96max
> - rc-xbox-dvd
> - rc-zx-irdec
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
> index 844ee2a6ce05..5317a7d69aa5 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
> @@ -71,7 +71,7 @@ required:
> - compatible
> - reg
>
> -unevaluatedProperties: false
> +additionalProperties: true
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> index b96da0c7f819..57319b425eaa 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -349,6 +349,8 @@ dependencies:
> cd-debounce-delay-ms: [ cd-gpios ]
> fixed-emmc-driver-type: [ non-removable ]
>
> +additionalProperties: true
> +
> examples:
> - |
> mmc@ab000000 {
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> index 85bd528e9a14..8dfad89c78a7 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> @@ -62,3 +62,5 @@ properties:
>
> dma-names:
> const: rx-tx
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index 40fc5b0b2b8c..274bbe6a365e 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -128,6 +128,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: true
> +
> examples:
> - |
> nand-controller {
> diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
> index 6396977d29e5..d1ef1fe6ab29 100644
> --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
> +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
> @@ -16,3 +16,5 @@ properties:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
> minimum: 1
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> index 6a1ec50ad4fd..a765ceba28c6 100644
> --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> @@ -89,4 +89,6 @@ oneOf:
> - required:
> - ethernet-ports
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> index fa2baca8c726..3fd85ce37e9c 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> @@ -205,4 +205,6 @@ properties:
> required:
> - speed
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> index a9e547ac7905..6dd72faebd89 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -177,6 +177,8 @@ properties:
> required:
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> ethernet {
> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> index 26afb556dfae..e811e0fd851c 100644
> --- a/Documentation/devicetree/bindings/net/mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> @@ -100,6 +100,8 @@ patternProperties:
> required:
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> davinci_mdio: mdio@5c030000 {
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 30a1efd26626..11a6fdb657c9 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -356,6 +356,8 @@ allOf:
> Enables the TSO feature otherwise it will be managed by
> MAC HW capability register.
>
> +additionalProperties: true
> +
> examples:
> - |
> stmmac_axi_setup: stmmac-axi-config {
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> index b7c00ed31085..d5d7f113bade 100644
> --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> @@ -36,6 +36,8 @@ dependencies:
> nvmem-names: [ nvmem ]
> nvmem-cell-names: [ nvmem-cells ]
>
> +additionalProperties: true
> +
> examples:
> - |
> tsens {
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> index b459f9dba6c9..7481a9e48f19 100644
> --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> @@ -67,6 +67,8 @@ patternProperties:
> required:
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
> index 016a5f61592d..60b8baf299bb 100644
> --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
> @@ -22,3 +22,5 @@ properties:
>
> required:
> - cdns,max-outbound-regions
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
> index 303078a7b7a8..a944f9bfffff 100644
> --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
> @@ -33,3 +33,5 @@ properties:
> deprecated: true
>
> msi-parent: true
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> index 02553d5e6c51..df4fe28222b0 100644
> --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
> @@ -21,3 +21,5 @@ properties:
> items:
> - const: pcie-phy
> # FIXME: names when more than 1
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
> index 0f8e575ac01a..7847bbcd4a03 100644
> --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
> @@ -36,3 +36,5 @@ properties:
>
> required:
> - compatible
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> index 6bfc25d0e1b3..4cb174bf31ff 100644
> --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> @@ -120,3 +120,5 @@ properties:
> required:
> - pinctrl-0
> - pinctrl-names
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> index 13b7ab9dd6d5..71ed0a9def84 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> @@ -138,3 +138,5 @@ properties:
> and the delay before latching a value to an output
> pin. Typically indicates how many double-inverters are
> used to delay the signal.
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> index ef8877ddb1eb..551df3d9b809 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> @@ -129,3 +129,5 @@ properties:
>
> pinctrl-pin-array:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
> index dd564349aa53..aed51e9dcb11 100644
> --- a/Documentation/devicetree/bindings/power/power-domain.yaml
> +++ b/Documentation/devicetree/bindings/power/power-domain.yaml
> @@ -69,6 +69,8 @@ properties:
> required:
> - "#power-domain-cells"
>
> +additionalProperties: true
> +
> examples:
> - |
> power: power-controller@12340000 {
> diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
> index 3bb02bb3a2d8..c5c55f627251 100644
> --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
> @@ -16,6 +16,8 @@ properties:
> This property is added to a supply in order to list the devices which
> supply it power, referenced by their phandles.
>
> +additionalProperties: true
> +
> examples:
> - |
> power {
> diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
> index fa4f9de92090..7d1f687cee9c 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm.yaml
> +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
> @@ -20,6 +20,8 @@ properties:
> required:
> - "#pwm-cells"
>
> +additionalProperties: true
> +
> examples:
> - |
> pwm: pwm@7000a000 {
> diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
> index ec505dbbf87c..6d0bc9cd4040 100644
> --- a/Documentation/devicetree/bindings/regulator/regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
> @@ -188,6 +188,8 @@ patternProperties:
>
> additionalProperties: false
>
> +additionalProperties: true
> +
> examples:
> - |
> xyzreg: regulator {
> diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
> index a0aea73bf412..7b4ae5d23351 100644
> --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
> +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
> @@ -35,3 +35,5 @@ properties:
> Initial data for the MICVDD regulator.
> $ref: "regulator.yaml#"
> type: object
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
> index f80ba2c66f71..c6925e0b16e4 100644
> --- a/Documentation/devicetree/bindings/riscv/cpus.yaml
> +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
> @@ -91,6 +91,8 @@ required:
> - riscv,isa
> - interrupt-controller
>
> +additionalProperties: true
> +
> examples:
> - |
> // Example 1: SiFive Freedom U540G Development Kit
> diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
> index ee237b2ed66a..2d055e37e6f7 100644
> --- a/Documentation/devicetree/bindings/rtc/rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
> @@ -47,4 +47,6 @@ properties:
> description:
> Enables wake up of host system on alarm.
>
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
> index fe90569475e1..0c9fa694f85c 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.yaml
> +++ b/Documentation/devicetree/bindings/serial/rs485.yaml
> @@ -45,4 +45,7 @@ properties:
> rs485-term-gpios:
> description: GPIO pin to enable RS485 bus termination.
> maxItems: 1
> +
> +additionalProperties: true
> +
> ...
> diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
> index 8645d0e526b4..65e75d040521 100644
> --- a/Documentation/devicetree/bindings/serial/serial.yaml
> +++ b/Documentation/devicetree/bindings/serial/serial.yaml
> @@ -124,6 +124,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: true
> +
> examples:
> - |
> serial@1234 {
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
> index 3cbf2d28a188..80d99861fec5 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> bus@30000000 {
> diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
> index 7a7f28469624..f50558ed914f 100644
> --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
> +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
> @@ -75,6 +75,8 @@ required:
> - reg
> - resets
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/gxbb-clkc.h>
> diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
> index c4cd58b5acd4..23138ddcb62d 100644
> --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
> +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
> @@ -111,3 +111,5 @@ properties:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 2
> maxItems: 2
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> index 44ee9d844ae0..d77219727768 100644
> --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> @@ -67,6 +67,9 @@ required:
> - "#size-cells"
> - ranges
>
> +additionalProperties:
> + type: object
> +
> examples:
> - |
> #include<dt-bindings/clock/tegra210-car.h>
> diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
> index 22d54be7900a..1627c0bb69be 100644
> --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
> +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
> @@ -112,3 +112,5 @@ properties:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 1
> maxItems: 12
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
> index 330924b8618e..4aad121eff3f 100644
> --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
> +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
> @@ -57,6 +57,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: true
> +
> examples:
> - |
> soundwire@c2d0000 {
> diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> index c6a2f543648b..2b154803b181 100644
> --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> @@ -140,6 +140,8 @@ patternProperties:
> - compatible
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> spi@f00 {
> diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
> index 0cfbf56ba825..173940930719 100644
> --- a/Documentation/devicetree/bindings/spmi/spmi.yaml
> +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
> @@ -55,6 +55,8 @@ patternProperties:
> required:
> - reg
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/spmi/spmi.h>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> index ad4beaf02842..f004779ba9b3 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> @@ -49,6 +49,8 @@ properties:
> and the second cell is the maximum cooling state requested.
> const: 2
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> index 727d04550324..9f747921e851 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> @@ -36,6 +36,8 @@ properties:
> containing several internal sensors.
> enum: [0, 1]
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> index 8eaf4b6c4735..f6819bf2a3b5 100644
> --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
> @@ -32,6 +32,8 @@ required:
> - interrupts
> - interrupt-names
>
> +additionalProperties: true
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> index 7263b7f2b510..b545b087b342 100644
> --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> @@ -22,6 +22,8 @@ properties:
> description:
> Name specifier for the USB PHY
>
> +additionalProperties: true
> +
> examples:
> - |
> usb {
> diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
> index 187bf6cb62bf..4e2c26cd981d 100644
> --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
> @@ -23,4 +23,6 @@ properties:
> description:
> Contains the watchdog timeout in seconds.
>
> +additionalProperties: true
> +
> ...
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-10-06 14:31 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 18:38 [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Rob Herring
2020-10-05 18:38 ` [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties' Rob Herring
2020-10-05 20:01 ` Mark Brown
2020-10-05 20:29 ` Wolfram Sang
2020-10-05 20:31 ` Krzysztof Kozlowski
2020-10-06 5:29 ` Vinod Koul
2020-10-06 7:37 ` Geert Uytterhoeven
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 14:33 ` Guenter Roeck
2020-10-06 16:57 ` Mathieu Poirier
2020-10-07 1:03 ` Dmitry Torokhov
2020-10-07 22:48 ` Alexandre Belloni
2020-10-05 18:38 ` [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties' Rob Herring
2020-10-05 20:02 ` Mark Brown
2020-10-05 20:33 ` Krzysztof Kozlowski
2020-10-06 6:59 ` Lee Jones
2020-10-06 9:58 ` Jonathan Cameron
2020-10-06 14:32 ` Guenter Roeck
2020-10-05 18:38 ` [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas Rob Herring
2020-10-05 20:34 ` Krzysztof Kozlowski
2020-10-06 5:42 ` Viresh Kumar
2020-10-06 7:42 ` Geert Uytterhoeven
2020-10-05 18:38 ` [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas Rob Herring
2020-10-05 20:04 ` Mark Brown
2020-10-05 20:35 ` Krzysztof Kozlowski
2020-10-05 20:55 ` Sebastian Reichel
2020-10-06 1:23 ` Chanwoo Choi
2020-10-06 5:30 ` Vinod Koul
2020-10-06 6:58 ` Lee Jones
2020-10-06 7:43 ` Geert Uytterhoeven
2020-10-06 8:22 ` Srinivas Kandagatla
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 10:00 ` Jonathan Cameron
2020-10-06 14:30 ` Guenter Roeck [this message]
2020-10-07 1:04 ` Dmitry Torokhov
2020-10-07 22:40 ` Alexandre Belloni
2020-10-06 8:25 ` [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83e74e8b-02ba-85a2-dda5-531dae6a3601@roeck-us.net \
--to=linux@roeck-us.net \
--cc=a.zummo@towertech.it \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=axboe@kernel.dk \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jason@lakedaemon.net \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=maz@kernel.org \
--cc=mchehab@kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mkl@pengutronix.de \
--cc=myungjoo.ham@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pavel@ucw.cz \
--cc=pmeerw@pmeerw.net \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=vireshk@kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=vkoul@kernel.org \
--cc=wg@grandegger.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).