* Re: [PATCH v2] RISC-V: Add address map dumper
2019-11-18 5:58 [PATCH v2] RISC-V: Add address map dumper Yash Shah
@ 2019-11-18 6:12 ` Anup Patel
2019-11-18 16:44 ` Logan Gunthorpe
2019-11-23 2:57 ` Paul Walmsley
2 siblings, 0 replies; 4+ messages in thread
From: Anup Patel @ 2019-11-18 6:12 UTC (permalink / raw)
To: Yash Shah
Cc: wangkefeng.wang, aou, Anup.Patel, linux-kernel, rppt,
Sachin Ghadi, palmer, ren_guo, Paul Walmsley ( Sifive),
linux-riscv, bmeng.cn, logang, tglx
On Mon, Nov 18, 2019 at 11:28 AM Yash Shah <yash.shah@sifive.com> wrote:
>
> Add support for dumping the kernel address space layout to the console.
> User can enable CONFIG_DEBUG_VM to dump the virtual memory region into
> dmesg buffer during boot-up.
>
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
> This patch is based on Linux 5.4-rc6 and tested on SiFive HiFive
> Unleashed board.
>
> Changes in v2:
> - Avoid #ifdefs inside functions
> - Helper functions instead of macros
> - Drop newly added CONFIG_DEBUG_VM_LAYOUT, instead use CONFIG_DEBUG_VM
> ---
> arch/riscv/mm/init.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 573463d..7828136 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -45,6 +45,41 @@ void setup_zero_page(void)
> memset((void *)empty_zero_page, 0, PAGE_SIZE);
> }
>
> +#ifdef CONFIG_DEBUG_VM
> +static inline void print_mlk(char *name, unsigned long b, unsigned long t)
> +{
> + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld kB)\n", name, b, t,
> + (((t) - (b)) >> 10));
> +}
> +
> +static inline void print_mlm(char *name, unsigned long b, unsigned long t)
> +{
> + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld MB)\n", name, b, t,
> + (((t) - (b)) >> 20));
> +}
> +
> +static void print_vm_layout(void)
> +{
> + pr_notice("Virtual kernel memory layout:\n");
> + print_mlk("fixmap", (unsigned long)FIXADDR_START,
> + (unsigned long)FIXADDR_TOP);
> + print_mlm("vmemmap", (unsigned long)VMEMMAP_START,
> + (unsigned long)VMEMMAP_END);
> + print_mlm("vmalloc", (unsigned long)VMALLOC_START,
> + (unsigned long)VMALLOC_END);
> + print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> + (unsigned long)high_memory);
> + print_mlk(".init", (unsigned long)__init_begin,
> + (unsigned long)__init_end);
> + print_mlk(".text", (unsigned long)_text, (unsigned long)_etext);
> + print_mlk(".data", (unsigned long)_sdata, (unsigned long)_edata);
> + print_mlk(".bss", (unsigned long)__bss_start,
> + (unsigned long)__bss_stop);
> +}
> +#else
> +static void print_vm_layout(void) { }
> +#endif /* CONFIG_DEBUG_VM */
> +
> void __init mem_init(void)
> {
> #ifdef CONFIG_FLATMEM
> @@ -55,6 +90,7 @@ void __init mem_init(void)
> memblock_free_all();
>
> mem_init_print_info(NULL);
> + print_vm_layout();
> }
>
> #ifdef CONFIG_BLK_DEV_INITRD
> --
> 2.7.4
>
LGTM.
Reviewed-by: Anup Patel <anup@brainfault.org>
Regards,
Anup
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] RISC-V: Add address map dumper
2019-11-18 5:58 [PATCH v2] RISC-V: Add address map dumper Yash Shah
2019-11-18 6:12 ` Anup Patel
@ 2019-11-18 16:44 ` Logan Gunthorpe
2019-11-23 2:57 ` Paul Walmsley
2 siblings, 0 replies; 4+ messages in thread
From: Logan Gunthorpe @ 2019-11-18 16:44 UTC (permalink / raw)
To: Yash Shah, Paul Walmsley ( Sifive), linux-riscv, linux-kernel
Cc: wangkefeng.wang, aou, Anup.Patel, rppt, Sachin Ghadi, palmer,
ren_guo, tglx, bmeng.cn
On 2019-11-17 10:58 p.m., Yash Shah wrote:
> Add support for dumping the kernel address space layout to the console.
> User can enable CONFIG_DEBUG_VM to dump the virtual memory region into
> dmesg buffer during boot-up.
>
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
Looks good to me, thanks.
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
> ---
> This patch is based on Linux 5.4-rc6 and tested on SiFive HiFive
> Unleashed board.
>
> Changes in v2:
> - Avoid #ifdefs inside functions
> - Helper functions instead of macros
> - Drop newly added CONFIG_DEBUG_VM_LAYOUT, instead use CONFIG_DEBUG_VM
> ---
> arch/riscv/mm/init.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 573463d..7828136 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -45,6 +45,41 @@ void setup_zero_page(void)
> memset((void *)empty_zero_page, 0, PAGE_SIZE);
> }
>
> +#ifdef CONFIG_DEBUG_VM
> +static inline void print_mlk(char *name, unsigned long b, unsigned long t)
> +{
> + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld kB)\n", name, b, t,
> + (((t) - (b)) >> 10));
> +}
> +
> +static inline void print_mlm(char *name, unsigned long b, unsigned long t)
> +{
> + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld MB)\n", name, b, t,
> + (((t) - (b)) >> 20));
> +}
> +
> +static void print_vm_layout(void)
> +{
> + pr_notice("Virtual kernel memory layout:\n");
> + print_mlk("fixmap", (unsigned long)FIXADDR_START,
> + (unsigned long)FIXADDR_TOP);
> + print_mlm("vmemmap", (unsigned long)VMEMMAP_START,
> + (unsigned long)VMEMMAP_END);
> + print_mlm("vmalloc", (unsigned long)VMALLOC_START,
> + (unsigned long)VMALLOC_END);
> + print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> + (unsigned long)high_memory);
> + print_mlk(".init", (unsigned long)__init_begin,
> + (unsigned long)__init_end);
> + print_mlk(".text", (unsigned long)_text, (unsigned long)_etext);
> + print_mlk(".data", (unsigned long)_sdata, (unsigned long)_edata);
> + print_mlk(".bss", (unsigned long)__bss_start,
> + (unsigned long)__bss_stop);
> +}
> +#else
> +static void print_vm_layout(void) { }
> +#endif /* CONFIG_DEBUG_VM */
> +
> void __init mem_init(void)
> {
> #ifdef CONFIG_FLATMEM
> @@ -55,6 +90,7 @@ void __init mem_init(void)
> memblock_free_all();
>
> mem_init_print_info(NULL);
> + print_vm_layout();
> }
>
> #ifdef CONFIG_BLK_DEV_INITRD
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] RISC-V: Add address map dumper
2019-11-18 5:58 [PATCH v2] RISC-V: Add address map dumper Yash Shah
2019-11-18 6:12 ` Anup Patel
2019-11-18 16:44 ` Logan Gunthorpe
@ 2019-11-23 2:57 ` Paul Walmsley
2 siblings, 0 replies; 4+ messages in thread
From: Paul Walmsley @ 2019-11-23 2:57 UTC (permalink / raw)
To: Yash Shah
Cc: wangkefeng.wang, aou, Anup.Patel, linux-kernel, rppt,
Sachin Ghadi, palmer, ren_guo, linux-riscv, bmeng.cn, logang,
tglx
Hi Yash,
On Mon, 18 Nov 2019, Yash Shah wrote:
> Add support for dumping the kernel address space layout to the console.
> User can enable CONFIG_DEBUG_VM to dump the virtual memory region into
> dmesg buffer during boot-up.
>
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
Thanks, I've queued up the following patch. I added the PCI I/O region,
and also dropped some of the .init/.text/etc. prints since they duplicate
the output from mem_init_print_info().
- Paul
From: Yash Shah <yash.shah@sifive.com>
Date: Mon, 18 Nov 2019 05:58:34 +0000
Subject: [PATCH] RISC-V: Add address map dumper
Add support for dumping the kernel address space layout to the console.
User can enable CONFIG_DEBUG_VM to dump the virtual memory region into
dmesg buffer during boot-up.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: dropped .init/.text/.data/.bss prints;
added PCI legacy I/O region display]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
---
arch/riscv/mm/init.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 573463d1c799..c2c0e244555f 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -45,6 +45,37 @@ void setup_zero_page(void)
memset((void *)empty_zero_page, 0, PAGE_SIZE);
}
+#ifdef CONFIG_DEBUG_VM
+static inline void print_mlk(char *name, unsigned long b, unsigned long t)
+{
+ pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld kB)\n", name, b, t,
+ (((t) - (b)) >> 10));
+}
+
+static inline void print_mlm(char *name, unsigned long b, unsigned long t)
+{
+ pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld MB)\n", name, b, t,
+ (((t) - (b)) >> 20));
+}
+
+static void print_vm_layout(void)
+{
+ pr_notice("Virtual kernel memory layout:\n");
+ print_mlk("fixmap", (unsigned long)FIXADDR_START,
+ (unsigned long)FIXADDR_TOP);
+ print_mlm("pci io", (unsigned long)PCI_IO_START,
+ (unsigned long)PCI_IO_END);
+ print_mlm("vmemmap", (unsigned long)VMEMMAP_START,
+ (unsigned long)VMEMMAP_END);
+ print_mlm("vmalloc", (unsigned long)VMALLOC_START,
+ (unsigned long)VMALLOC_END);
+ print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
+ (unsigned long)high_memory);
+}
+#else
+static void print_vm_layout(void) { }
+#endif /* CONFIG_DEBUG_VM */
+
void __init mem_init(void)
{
#ifdef CONFIG_FLATMEM
@@ -55,6 +86,7 @@ void __init mem_init(void)
memblock_free_all();
mem_init_print_info(NULL);
+ print_vm_layout();
}
#ifdef CONFIG_BLK_DEV_INITRD
--
2.24.0.rc0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 4+ messages in thread