From: Anup Patel <anup@brainfault.org> To: Damien Le Moal <damien.lemoal@wdc.com> Cc: linux-riscv <linux-riscv@lists.infradead.org>, Anup Patel <Anup.Patel@wdc.com>, Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com> Subject: Re: [PATCH 09/10] riscv: Kendryte K210 default config Date: Mon, 2 Mar 2020 09:37:21 +0530 Message-ID: <CAAhSdy28YNdjH_mtsO4jKLR_BzPHxuQz0BjjxWgb3aO06Wmtyg@mail.gmail.com> (raw) In-Reply-To: <20200212103432.660256-10-damien.lemoal@wdc.com> On Wed, Feb 12, 2020 at 4:05 PM Damien Le Moal <damien.lemoal@wdc.com> wrote: > > The patch adds defconfig to build No-MMU kernel meant for > Kendryte K210 SoC. > > Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> LGTM. Reviewed-by: Anup Patel <anup@brainfault.org> Regards, Anup > --- > arch/riscv/configs/nommu_k210_defconfig | 68 +++++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 arch/riscv/configs/nommu_k210_defconfig > > diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig > new file mode 100644 > index 000000000000..00ded8f0bc55 > --- /dev/null > +++ b/arch/riscv/configs/nommu_k210_defconfig > @@ -0,0 +1,68 @@ > +# CONFIG_CPU_ISOLATION is not set > +CONFIG_LOG_BUF_SHIFT=15 > +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 > +CONFIG_BLK_DEV_INITRD=y > +CONFIG_INITRAMFS_SOURCE="k210.cpio" > +CONFIG_INITRAMFS_FORCE=y > +# CONFIG_RD_BZIP2 is not set > +# CONFIG_RD_LZMA is not set > +# CONFIG_RD_XZ is not set > +# CONFIG_RD_LZO is not set > +# CONFIG_RD_LZ4 is not set > +# CONFIG_BOOT_CONFIG is not set > +CONFIG_CC_OPTIMIZE_FOR_SIZE=y > +# CONFIG_SYSFS_SYSCALL is not set > +# CONFIG_FHANDLE is not set > +# CONFIG_BASE_FULL is not set > +# CONFIG_EPOLL is not set > +# CONFIG_SIGNALFD is not set > +# CONFIG_TIMERFD is not set > +# CONFIG_EVENTFD is not set > +# CONFIG_AIO is not set > +# CONFIG_IO_URING is not set > +# CONFIG_ADVISE_SYSCALLS is not set > +# CONFIG_MEMBARRIER is not set > +# CONFIG_KALLSYMS is not set > +CONFIG_EMBEDDED=y > +# CONFIG_VM_EVENT_COUNTERS is not set > +# CONFIG_COMPAT_BRK is not set > +CONFIG_SLOB=y > +# CONFIG_SLAB_MERGE_DEFAULT is not set > +# CONFIG_MMU is not set > +CONFIG_SOC_KENDRYTE=y > +CONFIG_MAXPHYSMEM_2GB=y > +CONFIG_SMP=y > +CONFIG_NR_CPUS=2 > +CONFIG_CMDLINE="earlycon console=ttySIF0" > +CONFIG_CMDLINE_FORCE=y > +CONFIG_USE_BUILTIN_DTB=y > +CONFIG_BUILTIN_DTB_SOURCE="kendryte/k210" > +# CONFIG_BLOCK is not set > +CONFIG_BINFMT_FLAT=y > +# CONFIG_COREDUMP is not set > +CONFIG_DEVTMPFS=y > +CONFIG_DEVTMPFS_MOUNT=y > +# CONFIG_FW_LOADER is not set > +# CONFIG_ALLOW_DEV_COREDUMP is not set > +# CONFIG_INPUT_KEYBOARD is not set > +# CONFIG_INPUT_MOUSE is not set > +# CONFIG_SERIO is not set > +# CONFIG_LEGACY_PTYS is not set > +# CONFIG_LDISC_AUTOLOAD is not set > +# CONFIG_DEVMEM is not set > +# CONFIG_HW_RANDOM is not set > +# CONFIG_HWMON is not set > +# CONFIG_VGA_CONSOLE is not set > +# CONFIG_HID is not set > +# CONFIG_USB_SUPPORT is not set > +# CONFIG_VIRTIO_MENU is not set > +# CONFIG_DNOTIFY is not set > +# CONFIG_INOTIFY_USER is not set > +# CONFIG_MISC_FILESYSTEMS is not set > +CONFIG_LSM="[]" > +CONFIG_PRINTK_TIME=y > +# CONFIG_DEBUG_MISC is not set > +# CONFIG_SCHED_DEBUG is not set > +# CONFIG_RCU_TRACE is not set > +# CONFIG_FTRACE is not set > +# CONFIG_RUNTIME_TESTING_MENU is not set > -- > 2.24.1 > >
next prev parent reply index Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-12 10:34 [PATCH 00/10] Kendryte k210 SoC boards support Damien Le Moal 2020-02-12 10:34 ` [PATCH 01/10] riscv: Fix gitignore Damien Le Moal 2020-02-20 0:15 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 02/10] riscv: Force flat memory model with no-mmu Damien Le Moal 2020-02-14 20:18 ` Sean Anderson 2020-02-15 2:15 ` Damien Le Moal 2020-02-15 2:26 ` Sean Anderson 2020-02-15 2:40 ` Damien Le Moal 2020-03-02 3:48 ` Anup Patel 2020-03-04 18:38 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 03/10] riscv: Unaligned load/store handling for M_MODE Damien Le Moal 2020-03-02 3:57 ` Anup Patel 2020-03-04 19:28 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 04/10] riscv: Add BUILTIN_DTB support Damien Le Moal 2020-03-02 3:58 ` Anup Patel 2020-03-04 19:28 ` Palmer Dabbelt 2020-03-05 4:58 ` Anup Patel 2020-03-05 5:14 ` Damien Le Moal 2020-03-05 5:37 ` Anup Patel 2020-03-05 6:13 ` Damien Le Moal 2020-03-08 6:10 ` Anup Patel 2020-03-05 8:18 ` Atish Patra 2020-03-07 0:02 ` Sean Anderson 2020-03-07 1:51 ` Atish Patra 2020-03-07 2:08 ` Sean Anderson 2020-03-06 23:56 ` Sean Anderson 2020-02-12 10:34 ` [PATCH 05/10] riscv: Add SOC early init support Damien Le Moal 2020-03-04 19:28 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 06/10] riscv: Add Kendryte K210 SoC support Damien Le Moal 2020-02-14 20:31 ` Sean Anderson 2020-03-04 19:38 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 07/10] riscv: Select required drivers for Kendryte SOC Damien Le Moal 2020-03-02 3:59 ` Anup Patel 2020-03-04 19:44 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 08/10] riscv: Add Kendryte K210 device tree Damien Le Moal 2020-02-14 20:51 ` Sean Anderson 2020-02-15 2:34 ` Damien Le Moal 2020-02-15 2:48 ` Sean Anderson 2020-02-15 3:00 ` Damien Le Moal 2020-02-18 14:12 ` Carlos Eduardo de Paula 2020-02-18 14:18 ` Sean Anderson 2020-02-18 14:30 ` Carlos Eduardo de Paula 2020-02-18 17:48 ` Sean Anderson 2020-02-18 19:26 ` Carlos Eduardo de Paula 2020-02-19 9:06 ` Wladimir J. van der Laan 2020-02-19 22:28 ` Sean Anderson 2020-02-20 10:48 ` Wladimir J. van der Laan 2020-02-22 19:07 ` Wladimir J. van der Laan 2020-04-01 17:55 ` Drew Fustini 2020-04-02 2:24 ` Damien Le Moal 2020-02-19 8:50 ` Wladimir J. van der Laan 2020-02-27 19:43 ` Sean Anderson 2020-03-02 4:06 ` Anup Patel 2020-03-02 4:15 ` Damien Le Moal 2020-03-02 4:22 ` Anup Patel 2020-03-02 4:51 ` Damien Le Moal 2020-03-02 5:05 ` Anup Patel 2020-03-02 5:08 ` Damien Le Moal 2020-03-07 0:18 ` Sean Anderson 2020-03-07 4:11 ` Anup Patel 2020-03-04 19:44 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 09/10] riscv: Kendryte K210 default config Damien Le Moal 2020-03-02 4:07 ` Anup Patel [this message] 2020-03-04 19:44 ` Palmer Dabbelt 2020-02-12 10:34 ` [PATCH 10/10] riscv: create a loader.bin for the kendryte kflash.py tool Damien Le Moal 2020-03-02 4:08 ` Anup Patel 2020-03-04 19:44 ` Palmer Dabbelt 2020-02-14 15:05 ` [PATCH 00/10] Kendryte k210 SoC boards support Carlos Eduardo de Paula 2020-02-15 2:02 ` Damien Le Moal 2020-02-17 13:28 ` Carlos Eduardo de Paula 2020-02-26 21:31 ` Carlos Eduardo de Paula 2020-02-27 2:18 ` Damien Le Moal 2020-02-28 20:32 ` Sean Anderson 2020-03-02 3:01 ` Damien Le Moal 2020-03-02 3:53 ` Sean Anderson 2020-03-02 4:11 ` Damien Le Moal 2020-03-02 4:18 ` Sean Anderson 2020-03-02 4:54 ` Damien Le Moal 2020-03-02 4:56 ` Sean Anderson 2020-03-02 5:03 ` Damien Le Moal 2020-03-02 4:17 ` Anup Patel 2020-03-02 4:21 ` Sean Anderson 2020-03-02 4:48 ` Damien Le Moal 2020-03-02 4:51 ` Damien Le Moal 2020-03-02 5:02 ` Sean Anderson 2020-03-02 5:11 ` Damien Le Moal 2020-03-02 5:25 ` Sean Anderson 2020-03-02 5:43 ` Damien Le Moal 2020-03-04 19:44 ` Palmer Dabbelt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAAhSdy28YNdjH_mtsO4jKLR_BzPHxuQz0BjjxWgb3aO06Wmtyg@mail.gmail.com \ --to=anup@brainfault.org \ --cc=Anup.Patel@wdc.com \ --cc=damien.lemoal@wdc.com \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-RISC-V Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \ linux-riscv@lists.infradead.org public-inbox-index linux-riscv Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv AGPL code for this site: git clone https://public-inbox.org/public-inbox.git