From: Yash Shah <yash.shah@sifive.com>
To: Palmer Dabbelt <palmer@sifive.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Albert Ou <aou@eecs.berkeley.edu>,
"linux-kernel@vger.kernel.org List"
<linux-kernel@vger.kernel.org>,
Sachin Ghadi <sachin.ghadi@sifive.com>,
Rob Herring <robh+dt@kernel.org>,
Sagar Kadam <sagar.kadam@sifive.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org, Bin Meng <bmeng.cn@gmail.com>
Subject: Re: [PATCH] riscv: dts: Add DT support for SiFive FU540 PWM driver
Date: Mon, 16 Sep 2019 16:48:40 +0530 [thread overview]
Message-ID: <CAJ2_jOHJ5zuxDc6gsFiZou+-yVg=pr+uSHGJB8VPT1O-Bu3idg@mail.gmail.com> (raw)
In-Reply-To: <mhng-c8b87e96-987e-4577-acc2-1e22c9b81b10@palmer-si-x1e>
On Sat, Sep 14, 2019 at 2:50 AM Palmer Dabbelt <palmer@sifive.com> wrote:
>
> On Tue, 10 Sep 2019 02:52:07 PDT (-0700), yash.shah@sifive.com wrote:
> > Hi,
> >
> > Any comments on this patch?
>
> I don't see "sifive,pwm0" in the DT bindings documentation, and it doesn't
> match our standard way of doing these things (which would have at least
> "sifive,fu540-c000-pwm").
"sifive,pwm0" is present in the DT bindings documentation at
Documentation/devicetree/bindings/pwm/pwm-sifive.txt
Yes, I agree that this patch is missing "sifive,fu540-c000-pwm". I
will add it along with "sifive,pwm0" and repost as version 2.
Thanks for your comment.
- Yash
>
> >
> > - Yash
> >
> > On Wed, Aug 21, 2019 at 2:53 PM Yash Shah <yash.shah@sifive.com> wrote:
> >>
> >> Add the PWM DT node in SiFive FU540 soc-specific DT file.
> >> Enable the PWM nodes in HiFive Unleashed board-specific DT file.
> >>
> >> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> >> ---
> >> arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 19 +++++++++++++++++++
> >> arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 8 ++++++++
> >> 2 files changed, 27 insertions(+)
> >>
> >> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> >> index 42b5ec2..bb422db 100644
> >> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> >> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> >> @@ -230,6 +230,25 @@
> >> #size-cells = <0>;
> >> status = "disabled";
> >> };
> >> + pwm0: pwm@10020000 {
> >> + compatible = "sifive,pwm0";
> >> + reg = <0x0 0x10020000 0x0 0x1000>;
> >> + interrupt-parent = <&plic0>;
> >> + interrupts = <42 43 44 45>;
> >> + clocks = <&prci PRCI_CLK_TLCLK>;
> >> + #pwm-cells = <3>;
> >> + status = "disabled";
> >> + };
> >> + pwm1: pwm@10021000 {
> >> + compatible = "sifive,pwm0";
> >> + reg = <0x0 0x10021000 0x0 0x1000>;
> >> + interrupt-parent = <&plic0>;
> >> + interrupts = <46 47 48 49>;
> >> + reg-names = "control";
> >> + clocks = <&prci PRCI_CLK_TLCLK>;
> >> + #pwm-cells = <3>;
> >> + status = "disabled";
> >> + };
> >>
> >> };
> >> };
> >> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> >> index 93d68cb..104d334 100644
> >> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> >> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> >> @@ -85,3 +85,11 @@
> >> reg = <0>;
> >> };
> >> };
> >> +
> >> +&pwm0 {
> >> + status = "okay";
> >> +};
> >> +
> >> +&pwm1 {
> >> + status = "okay";
> >> +};
> >> --
> >> 1.9.1
> >>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-09-16 11:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 9:23 [PATCH] riscv: dts: Add DT support for SiFive FU540 PWM driver Yash Shah
2019-09-10 9:52 ` Yash Shah
2019-09-13 21:20 ` Palmer Dabbelt
2019-09-16 11:18 ` Yash Shah [this message]
2019-09-18 13:41 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJ2_jOHJ5zuxDc6gsFiZou+-yVg=pr+uSHGJB8VPT1O-Bu3idg@mail.gmail.com' \
--to=yash.shah@sifive.com \
--cc=aou@eecs.berkeley.edu \
--cc=bmeng.cn@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sachin.ghadi@sifive.com \
--cc=sagar.kadam@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).