* [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC
@ 2023-03-11 9:07 Hal Feng
2023-03-11 9:07 ` [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
` (20 more replies)
0 siblings, 21 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
This patch series adds basic clock, reset & DT support for StarFive
JH7110 SoC.
You can simply review or test the patches at the link [1].
[1]: https://github.com/hal-feng/linux/commits/visionfive2-minimal
Changes since v4:
- Rebased on v6.3-rc1.
- Added two patches to replace SOC_STARFIVE with ARCH_STARFIVE.
- Added Tested-by tag for Tommaso.
Patch 9:
- Set GMAC1 related clocks as optional inputs.
- Dropped PLL clock definitions.
Patch 10:
- Set GMAC0 related clocks and RTC oscillator as optional inputs.
- Sorted the clocks.
Patch 11:
- Replaced SOC_STARFIVE with ARCH_STARFIVE.
- Added macros for PLL clocks and adjusted the code properly to
make it easier to add the PLL clock driver later.
- Updated the clock flags.
Patch 12:
- Built as a module by default.
- Sorted the clocks.
- Updated the clock flags.
Patch 13:
- Replaced "default CLK_STARFIVE_JH7110_SYS" with "default ARCH_STARFIVE".
- Renamed "reset_info" struct to "jh7110_reset_info" and moved its
definition into the driver.
- Put jh7110_sys_info and jh7110_sys_info before the probe().
Patch 17:
- Dropped "_zicsr" in ISA.
- Sorted the external clocks alphabetically.
- Put the ccache node before the plic node according to their addresses.
- Sorted the clock inputs of the aoncrg node.
Patch 19:
- Replaced SOC_STARFIVE with ARCH_STARFIVE.
- Sorted the nodes alphabetically.
v4: https://lore.kernel.org/all/20230221024645.127922-1-hal.feng@starfivetech.com/
Changes since v3:
- Suggested by Conor, Merged clock & reset series and DT series together
so that they could go via the same tree as the dt-binding headers are
required by both driver & devicetree.
- Rebased on tag v6.2.
[Clock & reset]
Patch 2:
- Split patch 2 into two. One for renaming file and one for renaming
variables. (by Conor)
Patch 4:
- Split patch 4 into two. One for code movement and one for
extraction. (by Conor)
Patch 5 & 9 & 10 & 11:
- Fixed the issues reported by kernel test robot.
Patch 9:
- Set (&priv->base) as driver data instead of (priv->base).
- Set the frequency of clock PLL0 as 1000MHz for Synchronizing with the
lastest u-boot setting from StarFive. (by Emil)
- Used devm_kzalloc() instead of kzalloc() when registering aux device.
Patch 10:
- Set (&priv->base) as driver data instead of (priv->base).
Patch 11:
- Used (*base) to get the register base address instead of (base).
[Device tree]
- Dropped patch 1, 4, 5 because they were accepted.
- Added a new patch to add SiFive S7 compatible. (by Conor)
- Added a new patch to add JH7110 pin function definitions.
Patch 6:
- Changed the label "S76_0" to "S7_0" and used compatible "sifive,s7"
for core 0.
- Updated ISA of each cores. (by Conor)
- Made the node names generic. (by Krzysztof)
- Added clock-output-names for all external clocks.
- Added i2c0~6 nodes.
- Changed the node name "gpio" to "pinctrl". Changed the label "gpio"
and "gpioa" to "sysgpio" and "aongpio". (by Conor)
Patch 7:
- Separated the long lines into more lines in Makefile. (by Conor)
- Renamed jh7110-starfive-visionfive-2-va.dts and
jh7110-starfive-visionfive-2-vb.dts to
jh7110-starfive-visionfive-2-v1.2a.dts and
jh7110-starfive-visionfive-2-v1.3b.dts.
Changed the model and compatible to match v1.2A and v1.3B which
are printed on the silkscreen of VisionFive 2 board. (by Emil)
- Configured pins for i2c0/2/5/6 and enabled them.
clock & reset v3: https://lore.kernel.org/all/20221220005054.34518-1-hal.feng@starfivetech.com/
DT v3: https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
Changes since v2:
[Clock & reset]
- Rebased on tag v6.1.
- Added "JH71X0" to the StarFive driver headers in MAINTAINERS.
- Removed Co-developed-by tag of Hal in patch 1 and patch 4.
- Changed the commit author from Hal to Emil in patch 2 and patch 5.
Removed Co-developed-by tag of Emil in patch 2 and patch 5. (by Emil)
- Improved the coding style of patch 11, 12 and 13.
- Dropped patch 14. (by Emil)
Patch 4:
- Passed the "owner" member of reset_controller_dev structure
directly in reset_starfive_jh7100_register(). (by Emil)
- Added MAINTAINERS changes.
Patch 7:
- Split patch 7 into sys part and aon part. Merged them into patch 9 and
patch 10 respectively. (by Krzysztof)
- Renamed include/dt-bindings/clock/starfive-jh7110.h to
include/dt-bindings/clock/starfive,jh7110-crg.h. (by Krzysztof)
- Synchronized the definitions with the latest changes from Emil.
Patch 8:
- Split patch 8 into sys part and aon part. Merged them into patch 9 and
patch 10 respectively. (by Krzysztof)
- Renamed include/dt-bindings/reset/starfive-jh7110.h to
include/dt-bindings/reset/starfive,jh7110-crg.h. (by Krzysztof)
- Fixed the date of Copyright. (by Emil)
- Dropped weird indentations. (by Krzysztof)
- Synchronized the definitions with the latest changes from Emil.
Patch 9:
- Improved the description of clocks. (by Emil and Krzysztof)
- Added MAINTAINERS changes.
Patch 10:
- Improved the description of clocks. (by Emil and Krzysztof)
- Changed the clock-name "clk_rtc" to "rtc_osc" and "apb_bus_func" to
"apb_bus".
Patch 11:
- Removed the flags of trace/debug clocks and set the flags of core clocks
as CLK_IS_CRITICAL. (by Emil)
- Deleted the extra 1-1 clocks and synchronized the clock tree with the
latest changes from Emil. (by Emil)
- Selected RESET_STARFIVE_JH7110 in Kconfig option CLK_STARFIVE_JH7110_SYS.
Patch 12:
- Changed the macro JH7110_AONCLK_RTC to JH7110_AONCLK_RTC_OSC and
JH7110_AONCLK_APB_BUS_FUNC to JH7110_AONCLK_APB_BUS.
- Synchronized the clock tree with the latest changes from Emil.
- Set the MODULE_LICENSE as "GPL" according to commit bf7fbeeae6db.
Patch 13:
- Removed the "asserted" member in reset_info structure and always pass
NULL when calling reset_starfive_jh71x0_register(). (by Emil)
[Device tree]
- Rebased on tag v6.1.
- Dropped patch 8 because it was merged.
Patch 1:
- Made the links into "Link:" tags. (by Conor)
- Corrected the board name to "VisionFive 2" instead of
"VisionFive V2" and added compatibles for version A and
version B of VisionFive 2. (by Emil)
Patch 4:
- Used "sifive,ccache0" compatible string to match. (by Conor)
Patch 5:
- Dropped "select SIFIVE_CCACHE" in config SOC_STARFIVE. (by Conor)
- Dropped "starfive,jh7110-ccache" compatible in
drivers/soc/sifive/sifive_ccache.c.
Patch 6:
- Removed all "clock-frequency = <0>". (by Conor)
- Sorted the nodes after their addresses. (by Emil)
- Renamed "clk_rtc" to "rtc_osc".
- Added "sifive,ccache0" compatible in the cache-controller node.
- Renamed "JH7110_SYSCLK_APB_BUS_FUNC" to "JH7110_SYSCLK_APB_BUS" and
renamed "apb_bus_func" to "apb_bus".
Renamed "JH7110_SYSCLK_IOMUX" to "JH7110_SYSCLK_IOMUX_APB".
Renamed "JH7110_SYSRST_IOMUX" to "JH7110_SYSRST_IOMUX_APB".
Renamed "JH7110_AONRST_AON_IOMUX" to "JH7110_AONRST_IOMUX".
- Removed "reg-names" in gpio nodes.
Patch 7:
- Corrected the board name to "VisionFive 2" instead of "VisionFive V2".
- Renamed jh7110-starfive-visionfive-v2.dts to
jh7110-starfive-visionfive-2.dtsi.
- Added dts for VisionFive 2 version A and version B boards.
- In the chosen node, deleted "linux,initrd-start" and "linux,initrd-end"
and changed the value of "stdout-path" to "serial0:115200n8".
- Changed the bias of uart0 "rx-pins" to
"bias-disable; /* external pull-up */".
- Renamed "clk_rtc" to "rtc_osc".
- Moved the gpio node behind the uart0 node.
clock & reset v2: https://lore.kernel.org/all/20221118010627.70576-1-hal.feng@starfivetech.com/
DT v2: https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@starfivetech.com/
Changes since v1:
[Clock & reset]
- Rebased on tag v6.1-rc5.
- Rewrote the clock and reset drivers using auxiliary bus framework, so
patch 8, 9, 15 were dropped and all patches changed a lot. (by Stephen)
- Split Patch 14 into two patches. One is for factoring out the common
JH71X0 code, the another one is for renaming. (by Stephen)
- Created a subdirectory for StarFive reset drivers.
- Factored out common JH71X0 reset code.
- Renamed the common clock and reset code from "*starfive*" or
"*STARFIVE*" to "*jh71x0*" or "*JH71X0*".
- Combined JH7110 system and always-on clock DT binding headers in one
file named "include/dt-bindings/clock/starfive-jh7110.h".
- Renamed clock definitions "JH7110_SYSCLK_PCLK2_MUX_FUNC_PCLK" and
"JH7110_SYSCLK_U2_PCLK_MUX_PCLK" to "JH7110_SYSCLK_PCLK2_MUX_FUNC" and
"JH7110_SYSCLK_PCLK2_MUX".
- Rewrote the DT bindings of clock and reset for using auxiliary bus.
- Registered an auxiliary device for reset controller in clock drivers.
- Changed clock names "CODAJ*" and "WAVE*" to "codaj*" and "wave*".
Changed clock names "u2_pclk_mux_func_pclk" and "u2_pclk_mux_pclk" to
"pclk2_mux_func" and "pclk2_mux".
- Changed the flags of clock apb0 and noc_bus_isp_axi to CLK_IS_CRITICAL
as suggested by StarFive SDK group.
- Registered clock gmac0_gtxc as a gate clock instead of a div clock
as suggested by StarFive SDK group.
- Changed the frequency of clock pll2_out to 1188MHz as suggested by
StarFive SDK group.
- Fixed the bug that the clock JH7110_AONCLK_GMAC0_GTXCLK was not handled
in JH7110 always-on clock driver.
- Registered the reset driver as an auxiliary driver.
- Reworded the commit messages.
[Device tree]
- Rebased on tag v6.1-rc5.
- Added blank line in patch 1. (by Krzysztof)
- Rebased patch 4 and 6 on the newest code. (by Conor)
- Dropped patch 5. (by Conor)
- Removed the quirk of JH7100 in patch 6, considering this patch series
should only add support for JH7110.
- For patch 27, added Co-developed-by tag for Jianlong and me. Renamed
cpu labels to "S76_0", "U74_*" instead of "cpu*" following the style
of jh7100.dtsi. Moved all "clock-frequency" properties to the board dts.
Rewrote clock-controller nodes and deleted reset-controller nodes for
using auxiliary bus. Rewrote gpio nodes following generic pinctrl
bindings. Removed the redundant second reset entry of uart nodes.
- For patch 28, added Co-developed-by tag for Jianlong and me. Added a
chosen node. Removed reserved-memory node. Added fixed frequency clock
nodes for overriding the "clock-frequency" properties. Rewrote the gpio
nodes following generic pinctrl bindings.
- Dropped patch 30. (by Conor)
- Reworded the commit messages.
v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
Emil Renner Berthing (16):
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: Create subdirectory for StarFive drivers
reset: starfive: Factor out common JH71X0 reset code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
dt-bindings: clock: Add StarFive JH7110 system clock and reset
generator
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset
generator
clk: starfive: Add StarFive JH7110 system clock driver
clk: starfive: Add StarFive JH7110 always-on clock driver
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
riscv: dts: starfive: Add initial StarFive JH7110 device tree
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device
tree
Hal Feng (4):
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
reset: starfive: Add StarFive JH7110 reset driver
dt-bindings: riscv: Add SiFive S7 compatible
Jianlong Huang (1):
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
.../clock/starfive,jh7110-aoncrg.yaml | 107 +++
.../clock/starfive,jh7110-syscrg.yaml | 104 +++
.../sifive,plic-1.0.0.yaml | 1 +
.../devicetree/bindings/riscv/cpus.yaml | 1 +
.../bindings/timer/sifive,clint.yaml | 1 +
MAINTAINERS | 16 +-
arch/riscv/boot/dts/starfive/Makefile | 6 +-
arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 308 ++++++++
.../jh7110-starfive-visionfive-2-v1.2a.dts | 13 +
.../jh7110-starfive-visionfive-2-v1.3b.dts | 13 +
.../jh7110-starfive-visionfive-2.dtsi | 215 ++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++
drivers/clk/Makefile | 2 +-
drivers/clk/starfive/Kconfig | 33 +-
drivers/clk/starfive/Makefile | 6 +-
.../clk/starfive/clk-starfive-jh7100-audio.c | 74 +-
drivers/clk/starfive/clk-starfive-jh7100.c | 713 +++++-------------
drivers/clk/starfive/clk-starfive-jh7100.h | 112 ---
.../clk/starfive/clk-starfive-jh7110-aon.c | 156 ++++
.../clk/starfive/clk-starfive-jh7110-sys.c | 451 +++++++++++
drivers/clk/starfive/clk-starfive-jh71x0.c | 383 ++++++++++
drivers/clk/starfive/clk-starfive-jh71x0.h | 122 +++
drivers/reset/Kconfig | 8 +-
drivers/reset/Makefile | 2 +-
drivers/reset/reset-starfive-jh7100.c | 173 -----
drivers/reset/starfive/Kconfig | 20 +
drivers/reset/starfive/Makefile | 5 +
.../reset/starfive/reset-starfive-jh7100.c | 74 ++
.../reset/starfive/reset-starfive-jh7110.c | 70 ++
.../reset/starfive/reset-starfive-jh71x0.c | 131 ++++
.../reset/starfive/reset-starfive-jh71x0.h | 14 +
.../dt-bindings/clock/starfive,jh7110-crg.h | 221 ++++++
.../dt-bindings/reset/starfive,jh7110-crg.h | 154 ++++
33 files changed, 3356 insertions(+), 862 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.c
create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.h
delete mode 100644 drivers/reset/reset-starfive-jh7100.c
create mode 100644 drivers/reset/starfive/Kconfig
create mode 100644 drivers/reset/starfive/Makefile
create mode 100644 drivers/reset/starfive/reset-starfive-jh7100.c
create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.c
create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.h
create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
base-commit: 8ca09d5fa3549d142c2080a72a4c70ce389163cd
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 12:56 ` Conor Dooley
2023-03-11 9:07 ` [PATCH v5 02/21] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
` (19 subsequent siblings)
20 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
Using ARCH_FOO symbol is preferred than SOC_FOO.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/clk/Makefile | 2 +-
drivers/clk/starfive/Kconfig | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..508651a10ebe 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -117,7 +117,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-y += sprd/
obj-$(CONFIG_ARCH_STI) += st/
obj-$(CONFIG_ARCH_STM32) += stm32/
-obj-$(CONFIG_SOC_STARFIVE) += starfive/
+obj-$(CONFIG_ARCH_STARFIVE) += starfive/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-y += sunxi-ng/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 003bd2d56ce7..ef3517f4a276 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -2,8 +2,8 @@
config CLK_STARFIVE_JH7100
bool "StarFive JH7100 clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
- default SOC_STARFIVE
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
help
Say yes here to support the clock controller on the StarFive JH7100
SoC.
@@ -11,7 +11,7 @@ config CLK_STARFIVE_JH7100
config CLK_STARFIVE_JH7100_AUDIO
tristate "StarFive JH7100 audio clock support"
depends on CLK_STARFIVE_JH7100
- default m if SOC_STARFIVE
+ default m if ARCH_STARFIVE
help
Say Y or M here to support the audio clocks on the StarFive JH7100
SoC.
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 02/21] clk: starfive: Factor out common JH7100 and JH7110 code
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2023-03-11 9:07 ` [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng
` (18 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
The clock control registers on the StarFive JH7100 and JH7110 work
identically, so factor out the code then drivers for the two SoCs
can share it without depending on each other. No functional change.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
MAINTAINERS | 4 +-
drivers/clk/starfive/Kconfig | 5 +
drivers/clk/starfive/Makefile | 3 +-
drivers/clk/starfive/clk-starfive-jh7100.c | 325 --------------------
drivers/clk/starfive/clk-starfive-jh7100.h | 2 +
drivers/clk/starfive/clk-starfive-jh71x0.c | 333 +++++++++++++++++++++
6 files changed, 344 insertions(+), 328 deletions(-)
create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8d5bc223f305..caba3b61ad5c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19913,11 +19913,11 @@ M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained
F: arch/riscv/boot/dts/starfive/
-STARFIVE JH7100 CLOCK DRIVERS
+STARFIVE JH71X0 CLOCK DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained
F: Documentation/devicetree/bindings/clock/starfive,jh7100-*.yaml
-F: drivers/clk/starfive/clk-starfive-jh7100*
+F: drivers/clk/starfive/clk-starfive-jh71*
F: include/dt-bindings/clock/starfive-jh7100*.h
STARFIVE JH7110 MMC/SD/SDIO DRIVER
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index ef3517f4a276..3ceeb19b5eda 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -1,8 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
+config CLK_STARFIVE_JH71X0
+ bool
+
config CLK_STARFIVE_JH7100
bool "StarFive JH7100 clock support"
depends on ARCH_STARFIVE || COMPILE_TEST
+ select CLK_STARFIVE_JH71X0
default ARCH_STARFIVE
help
Say yes here to support the clock controller on the StarFive JH7100
@@ -11,6 +15,7 @@ config CLK_STARFIVE_JH7100
config CLK_STARFIVE_JH7100_AUDIO
tristate "StarFive JH7100 audio clock support"
depends on CLK_STARFIVE_JH7100
+ select CLK_STARFIVE_JH71X0
default m if ARCH_STARFIVE
help
Say Y or M here to support the audio clocks on the StarFive JH7100
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 0fa8ecb9ec1c..82edfa9f9cb8 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# StarFive Clock
+obj-$(CONFIG_CLK_STARFIVE_JH71X0) += clk-starfive-jh71x0.o
+
obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index 691aeebc7092..eea52f16af0d 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -7,15 +7,10 @@
* Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
*/
-#include <linux/bits.h>
#include <linux/clk-provider.h>
-#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
-#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/clock/starfive-jh7100.h>
@@ -269,326 +264,6 @@ static const struct jh7100_clk_data jh7100_clk_data[] __initconst = {
JH7100_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
};
-static struct jh7100_clk *jh7100_clk_from(struct clk_hw *hw)
-{
- return container_of(hw, struct jh7100_clk, hw);
-}
-
-static struct jh7100_clk_priv *jh7100_priv_from(struct jh7100_clk *clk)
-{
- return container_of(clk, struct jh7100_clk_priv, reg[clk->idx]);
-}
-
-static u32 jh7100_clk_reg_get(struct jh7100_clk *clk)
-{
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
- void __iomem *reg = priv->base + 4 * clk->idx;
-
- return readl_relaxed(reg);
-}
-
-static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
-{
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
- void __iomem *reg = priv->base + 4 * clk->idx;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->rmw_lock, flags);
- value |= readl_relaxed(reg) & ~mask;
- writel_relaxed(value, reg);
- spin_unlock_irqrestore(&priv->rmw_lock, flags);
-}
-
-static int jh7100_clk_enable(struct clk_hw *hw)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, JH7100_CLK_ENABLE);
- return 0;
-}
-
-static void jh7100_clk_disable(struct clk_hw *hw)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, 0);
-}
-
-static int jh7100_clk_is_enabled(struct clk_hw *hw)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
-
- return !!(jh7100_clk_reg_get(clk) & JH7100_CLK_ENABLE);
-}
-
-static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 div = jh7100_clk_reg_get(clk) & JH7100_CLK_DIV_MASK;
-
- return div ? parent_rate / div : 0;
-}
-
-static int jh7100_clk_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- unsigned long parent = req->best_parent_rate;
- unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
- unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
- unsigned long result = parent / div;
-
- /*
- * we want the result clamped by min_rate and max_rate if possible:
- * case 1: div hits the max divider value, which means it's less than
- * parent / rate, so the result is greater than rate and min_rate in
- * particular. we can't do anything about result > max_rate because the
- * divider doesn't go any further.
- * case 2: div = DIV_ROUND_UP(parent, rate) which means the result is
- * always lower or equal to rate and max_rate. however the result may
- * turn out lower than min_rate, but then the next higher rate is fine:
- * div - 1 = ceil(parent / rate) - 1 < parent / rate
- * and thus
- * min_rate <= rate < parent / (div - 1)
- */
- if (result < req->min_rate && div > 1)
- result = parent / (div - 1);
-
- req->rate = result;
- return 0;
-}
-
-static int jh7100_clk_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
- 1UL, (unsigned long)clk->max_div);
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
- return 0;
-}
-
-static unsigned long jh7100_clk_frac_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 reg = jh7100_clk_reg_get(clk);
- unsigned long div100 = 100 * (reg & JH7100_CLK_INT_MASK) +
- ((reg & JH7100_CLK_FRAC_MASK) >> JH7100_CLK_FRAC_SHIFT);
-
- return (div100 >= JH7100_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
-}
-
-static int jh7100_clk_frac_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- unsigned long parent100 = 100 * req->best_parent_rate;
- unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
- unsigned long div100 = clamp(DIV_ROUND_CLOSEST(parent100, rate),
- JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
- unsigned long result = parent100 / div100;
-
- /* clamp the result as in jh7100_clk_determine_rate() above */
- if (result > req->max_rate && div100 < JH7100_CLK_FRAC_MAX)
- result = parent100 / (div100 + 1);
- if (result < req->min_rate && div100 > JH7100_CLK_FRAC_MIN)
- result = parent100 / (div100 - 1);
-
- req->rate = result;
- return 0;
-}
-
-static int jh7100_clk_frac_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- unsigned long div100 = clamp(DIV_ROUND_CLOSEST(100 * parent_rate, rate),
- JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
- u32 value = ((div100 % 100) << JH7100_CLK_FRAC_SHIFT) | (div100 / 100);
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, value);
- return 0;
-}
-
-static u8 jh7100_clk_get_parent(struct clk_hw *hw)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = jh7100_clk_reg_get(clk);
-
- return (value & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT;
-}
-
-static int jh7100_clk_set_parent(struct clk_hw *hw, u8 index)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = (u32)index << JH7100_CLK_MUX_SHIFT;
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_MUX_MASK, value);
- return 0;
-}
-
-static int jh7100_clk_mux_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- return clk_mux_determine_rate_flags(hw, req, 0);
-}
-
-static int jh7100_clk_get_phase(struct clk_hw *hw)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = jh7100_clk_reg_get(clk);
-
- return (value & JH7100_CLK_INVERT) ? 180 : 0;
-}
-
-static int jh7100_clk_set_phase(struct clk_hw *hw, int degrees)
-{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value;
-
- if (degrees == 0)
- value = 0;
- else if (degrees == 180)
- value = JH7100_CLK_INVERT;
- else
- return -EINVAL;
-
- jh7100_clk_reg_rmw(clk, JH7100_CLK_INVERT, value);
- return 0;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static void jh7100_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
-{
- static const struct debugfs_reg32 jh7100_clk_reg = {
- .name = "CTRL",
- .offset = 0,
- };
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
- struct debugfs_regset32 *regset;
-
- regset = devm_kzalloc(priv->dev, sizeof(*regset), GFP_KERNEL);
- if (!regset)
- return;
-
- regset->regs = &jh7100_clk_reg;
- regset->nregs = 1;
- regset->base = priv->base + 4 * clk->idx;
-
- debugfs_create_regset32("registers", 0400, dentry, regset);
-}
-#else
-#define jh7100_clk_debug_init NULL
-#endif
-
-static const struct clk_ops jh7100_clk_gate_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_div_ops = {
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_fdiv_ops = {
- .recalc_rate = jh7100_clk_frac_recalc_rate,
- .determine_rate = jh7100_clk_frac_determine_rate,
- .set_rate = jh7100_clk_frac_set_rate,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_gdiv_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_mux_ops = {
- .determine_rate = jh7100_clk_mux_determine_rate,
- .set_parent = jh7100_clk_set_parent,
- .get_parent = jh7100_clk_get_parent,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_gmux_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .determine_rate = jh7100_clk_mux_determine_rate,
- .set_parent = jh7100_clk_set_parent,
- .get_parent = jh7100_clk_get_parent,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_mdiv_ops = {
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .get_parent = jh7100_clk_get_parent,
- .set_parent = jh7100_clk_set_parent,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_gmd_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .get_parent = jh7100_clk_get_parent,
- .set_parent = jh7100_clk_set_parent,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
-};
-
-static const struct clk_ops jh7100_clk_inv_ops = {
- .get_phase = jh7100_clk_get_phase,
- .set_phase = jh7100_clk_set_phase,
- .debug_init = jh7100_clk_debug_init,
-};
-
-const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
-{
- if (max & JH7100_CLK_DIV_MASK) {
- if (max & JH7100_CLK_MUX_MASK) {
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gmd_ops;
- return &jh7100_clk_mdiv_ops;
- }
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gdiv_ops;
- if (max == JH7100_CLK_FRAC_MAX)
- return &jh7100_clk_fdiv_ops;
- return &jh7100_clk_div_ops;
- }
-
- if (max & JH7100_CLK_MUX_MASK) {
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gmux_ops;
- return &jh7100_clk_mux_ops;
- }
-
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gate_ops;
-
- return &jh7100_clk_inv_ops;
-}
-EXPORT_SYMBOL_GPL(starfive_jh7100_clk_ops);
-
static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data)
{
struct jh7100_clk_priv *priv = data;
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.h b/drivers/clk/starfive/clk-starfive-jh7100.h
index f116be5740a5..a8ba6e25b5ce 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.h
+++ b/drivers/clk/starfive/clk-starfive-jh7100.h
@@ -4,6 +4,8 @@
#include <linux/bits.h>
#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
/* register fields */
#define JH7100_CLK_ENABLE BIT(31)
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
new file mode 100644
index 000000000000..6c07b61b4a32
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7100 Clock Generator Driver
+ *
+ * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include "clk-starfive-jh7100.h"
+
+static struct jh7100_clk *jh7100_clk_from(struct clk_hw *hw)
+{
+ return container_of(hw, struct jh7100_clk, hw);
+}
+
+static struct jh7100_clk_priv *jh7100_priv_from(struct jh7100_clk *clk)
+{
+ return container_of(clk, struct jh7100_clk_priv, reg[clk->idx]);
+}
+
+static u32 jh7100_clk_reg_get(struct jh7100_clk *clk)
+{
+ struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ void __iomem *reg = priv->base + 4 * clk->idx;
+
+ return readl_relaxed(reg);
+}
+
+static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
+{
+ struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ void __iomem *reg = priv->base + 4 * clk->idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->rmw_lock, flags);
+ value |= readl_relaxed(reg) & ~mask;
+ writel_relaxed(value, reg);
+ spin_unlock_irqrestore(&priv->rmw_lock, flags);
+}
+
+static int jh7100_clk_enable(struct clk_hw *hw)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, JH7100_CLK_ENABLE);
+ return 0;
+}
+
+static void jh7100_clk_disable(struct clk_hw *hw)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, 0);
+}
+
+static int jh7100_clk_is_enabled(struct clk_hw *hw)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+
+ return !!(jh7100_clk_reg_get(clk) & JH7100_CLK_ENABLE);
+}
+
+static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 div = jh7100_clk_reg_get(clk) & JH7100_CLK_DIV_MASK;
+
+ return div ? parent_rate / div : 0;
+}
+
+static int jh7100_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ unsigned long parent = req->best_parent_rate;
+ unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
+ unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
+ unsigned long result = parent / div;
+
+ /*
+ * we want the result clamped by min_rate and max_rate if possible:
+ * case 1: div hits the max divider value, which means it's less than
+ * parent / rate, so the result is greater than rate and min_rate in
+ * particular. we can't do anything about result > max_rate because the
+ * divider doesn't go any further.
+ * case 2: div = DIV_ROUND_UP(parent, rate) which means the result is
+ * always lower or equal to rate and max_rate. however the result may
+ * turn out lower than min_rate, but then the next higher rate is fine:
+ * div - 1 = ceil(parent / rate) - 1 < parent / rate
+ * and thus
+ * min_rate <= rate < parent / (div - 1)
+ */
+ if (result < req->min_rate && div > 1)
+ result = parent / (div - 1);
+
+ req->rate = result;
+ return 0;
+}
+
+static int jh7100_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
+ 1UL, (unsigned long)clk->max_div);
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
+ return 0;
+}
+
+static unsigned long jh7100_clk_frac_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 reg = jh7100_clk_reg_get(clk);
+ unsigned long div100 = 100 * (reg & JH7100_CLK_INT_MASK) +
+ ((reg & JH7100_CLK_FRAC_MASK) >> JH7100_CLK_FRAC_SHIFT);
+
+ return (div100 >= JH7100_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
+}
+
+static int jh7100_clk_frac_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ unsigned long parent100 = 100 * req->best_parent_rate;
+ unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
+ unsigned long div100 = clamp(DIV_ROUND_CLOSEST(parent100, rate),
+ JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
+ unsigned long result = parent100 / div100;
+
+ /* clamp the result as in jh7100_clk_determine_rate() above */
+ if (result > req->max_rate && div100 < JH7100_CLK_FRAC_MAX)
+ result = parent100 / (div100 + 1);
+ if (result < req->min_rate && div100 > JH7100_CLK_FRAC_MIN)
+ result = parent100 / (div100 - 1);
+
+ req->rate = result;
+ return 0;
+}
+
+static int jh7100_clk_frac_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ unsigned long div100 = clamp(DIV_ROUND_CLOSEST(100 * parent_rate, rate),
+ JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
+ u32 value = ((div100 % 100) << JH7100_CLK_FRAC_SHIFT) | (div100 / 100);
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, value);
+ return 0;
+}
+
+static u8 jh7100_clk_get_parent(struct clk_hw *hw)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 value = jh7100_clk_reg_get(clk);
+
+ return (value & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT;
+}
+
+static int jh7100_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 value = (u32)index << JH7100_CLK_MUX_SHIFT;
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_MUX_MASK, value);
+ return 0;
+}
+
+static int jh7100_clk_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return clk_mux_determine_rate_flags(hw, req, 0);
+}
+
+static int jh7100_clk_get_phase(struct clk_hw *hw)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 value = jh7100_clk_reg_get(clk);
+
+ return (value & JH7100_CLK_INVERT) ? 180 : 0;
+}
+
+static int jh7100_clk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ u32 value;
+
+ if (degrees == 0)
+ value = 0;
+ else if (degrees == 180)
+ value = JH7100_CLK_INVERT;
+ else
+ return -EINVAL;
+
+ jh7100_clk_reg_rmw(clk, JH7100_CLK_INVERT, value);
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void jh7100_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
+{
+ static const struct debugfs_reg32 jh7100_clk_reg = {
+ .name = "CTRL",
+ .offset = 0,
+ };
+ struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ struct debugfs_regset32 *regset;
+
+ regset = devm_kzalloc(priv->dev, sizeof(*regset), GFP_KERNEL);
+ if (!regset)
+ return;
+
+ regset->regs = &jh7100_clk_reg;
+ regset->nregs = 1;
+ regset->base = priv->base + 4 * clk->idx;
+
+ debugfs_create_regset32("registers", 0400, dentry, regset);
+}
+#else
+#define jh7100_clk_debug_init NULL
+#endif
+
+static const struct clk_ops jh7100_clk_gate_ops = {
+ .enable = jh7100_clk_enable,
+ .disable = jh7100_clk_disable,
+ .is_enabled = jh7100_clk_is_enabled,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_div_ops = {
+ .recalc_rate = jh7100_clk_recalc_rate,
+ .determine_rate = jh7100_clk_determine_rate,
+ .set_rate = jh7100_clk_set_rate,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_fdiv_ops = {
+ .recalc_rate = jh7100_clk_frac_recalc_rate,
+ .determine_rate = jh7100_clk_frac_determine_rate,
+ .set_rate = jh7100_clk_frac_set_rate,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_gdiv_ops = {
+ .enable = jh7100_clk_enable,
+ .disable = jh7100_clk_disable,
+ .is_enabled = jh7100_clk_is_enabled,
+ .recalc_rate = jh7100_clk_recalc_rate,
+ .determine_rate = jh7100_clk_determine_rate,
+ .set_rate = jh7100_clk_set_rate,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_mux_ops = {
+ .determine_rate = jh7100_clk_mux_determine_rate,
+ .set_parent = jh7100_clk_set_parent,
+ .get_parent = jh7100_clk_get_parent,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_gmux_ops = {
+ .enable = jh7100_clk_enable,
+ .disable = jh7100_clk_disable,
+ .is_enabled = jh7100_clk_is_enabled,
+ .determine_rate = jh7100_clk_mux_determine_rate,
+ .set_parent = jh7100_clk_set_parent,
+ .get_parent = jh7100_clk_get_parent,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_mdiv_ops = {
+ .recalc_rate = jh7100_clk_recalc_rate,
+ .determine_rate = jh7100_clk_determine_rate,
+ .get_parent = jh7100_clk_get_parent,
+ .set_parent = jh7100_clk_set_parent,
+ .set_rate = jh7100_clk_set_rate,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_gmd_ops = {
+ .enable = jh7100_clk_enable,
+ .disable = jh7100_clk_disable,
+ .is_enabled = jh7100_clk_is_enabled,
+ .recalc_rate = jh7100_clk_recalc_rate,
+ .determine_rate = jh7100_clk_determine_rate,
+ .get_parent = jh7100_clk_get_parent,
+ .set_parent = jh7100_clk_set_parent,
+ .set_rate = jh7100_clk_set_rate,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_inv_ops = {
+ .get_phase = jh7100_clk_get_phase,
+ .set_phase = jh7100_clk_set_phase,
+ .debug_init = jh7100_clk_debug_init,
+};
+
+const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
+{
+ if (max & JH7100_CLK_DIV_MASK) {
+ if (max & JH7100_CLK_MUX_MASK) {
+ if (max & JH7100_CLK_ENABLE)
+ return &jh7100_clk_gmd_ops;
+ return &jh7100_clk_mdiv_ops;
+ }
+ if (max & JH7100_CLK_ENABLE)
+ return &jh7100_clk_gdiv_ops;
+ if (max == JH7100_CLK_FRAC_MAX)
+ return &jh7100_clk_fdiv_ops;
+ return &jh7100_clk_div_ops;
+ }
+
+ if (max & JH7100_CLK_MUX_MASK) {
+ if (max & JH7100_CLK_ENABLE)
+ return &jh7100_clk_gmux_ops;
+ return &jh7100_clk_mux_ops;
+ }
+
+ if (max & JH7100_CLK_ENABLE)
+ return &jh7100_clk_gate_ops;
+
+ return &jh7100_clk_inv_ops;
+}
+EXPORT_SYMBOL_GPL(starfive_jh7100_clk_ops);
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2023-03-11 9:07 ` [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-11 9:07 ` [PATCH v5 02/21] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-12 14:00 ` Conor Dooley
2023-03-11 9:07 ` [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
` (17 subsequent siblings)
20 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h for making
the code to be common.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../clk/starfive/{clk-starfive-jh7100.h => clk-starfive-jh71x0.h} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename drivers/clk/starfive/{clk-starfive-jh7100.h => clk-starfive-jh71x0.h} (100%)
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
similarity index 100%
rename from drivers/clk/starfive/clk-starfive-jh7100.h
rename to drivers/clk/starfive/clk-starfive-jh71x0.h
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (2 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-16 19:05 ` Tommaso Merciai
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
` (16 subsequent siblings)
20 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Rename some variables from "jh7100" or "JH7100" to "jh71x0"
or "JH71X0".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../clk/starfive/clk-starfive-jh7100-audio.c | 74 ++--
drivers/clk/starfive/clk-starfive-jh7100.c | 388 +++++++++---------
drivers/clk/starfive/clk-starfive-jh71x0.c | 284 ++++++-------
drivers/clk/starfive/clk-starfive-jh71x0.h | 72 ++--
4 files changed, 409 insertions(+), 409 deletions(-)
diff --git a/drivers/clk/starfive/clk-starfive-jh7100-audio.c b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
index 8473a65e219b..02aefb7264f8 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100-audio.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
@@ -16,7 +16,7 @@
#include <dt-bindings/clock/starfive-jh7100-audio.h>
-#include "clk-starfive-jh7100.h"
+#include "clk-starfive-jh71x0.h"
/* external clocks */
#define JH7100_AUDCLK_AUDIO_SRC (JH7100_AUDCLK_END + 0)
@@ -28,66 +28,66 @@
#define JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD (JH7100_AUDCLK_END + 6)
#define JH7100_AUDCLK_VAD_INTMEM (JH7100_AUDCLK_END + 7)
-static const struct jh7100_clk_data jh7100_audclk_data[] = {
- JH7100__GMD(JH7100_AUDCLK_ADC_MCLK, "adc_mclk", 0, 15, 2,
+static const struct jh71x0_clk_data jh7100_audclk_data[] = {
+ JH71X0__GMD(JH7100_AUDCLK_ADC_MCLK, "adc_mclk", 0, 15, 2,
JH7100_AUDCLK_AUDIO_SRC,
JH7100_AUDCLK_AUDIO_12288),
- JH7100__GMD(JH7100_AUDCLK_I2S1_MCLK, "i2s1_mclk", 0, 15, 2,
+ JH71X0__GMD(JH7100_AUDCLK_I2S1_MCLK, "i2s1_mclk", 0, 15, 2,
JH7100_AUDCLK_AUDIO_SRC,
JH7100_AUDCLK_AUDIO_12288),
- JH7100_GATE(JH7100_AUDCLK_I2SADC_APB, "i2sadc_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100_MDIV(JH7100_AUDCLK_I2SADC_BCLK, "i2sadc_bclk", 31, 2,
+ JH71X0_GATE(JH7100_AUDCLK_I2SADC_APB, "i2sadc_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0_MDIV(JH7100_AUDCLK_I2SADC_BCLK, "i2sadc_bclk", 31, 2,
JH7100_AUDCLK_ADC_MCLK,
JH7100_AUDCLK_I2SADC_BCLK_IOPAD),
- JH7100__INV(JH7100_AUDCLK_I2SADC_BCLK_N, "i2sadc_bclk_n", JH7100_AUDCLK_I2SADC_BCLK),
- JH7100_MDIV(JH7100_AUDCLK_I2SADC_LRCLK, "i2sadc_lrclk", 63, 3,
+ JH71X0__INV(JH7100_AUDCLK_I2SADC_BCLK_N, "i2sadc_bclk_n", JH7100_AUDCLK_I2SADC_BCLK),
+ JH71X0_MDIV(JH7100_AUDCLK_I2SADC_LRCLK, "i2sadc_lrclk", 63, 3,
JH7100_AUDCLK_I2SADC_BCLK_N,
JH7100_AUDCLK_I2SADC_LRCLK_IOPAD,
JH7100_AUDCLK_I2SADC_BCLK),
- JH7100_GATE(JH7100_AUDCLK_PDM_APB, "pdm_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100__GMD(JH7100_AUDCLK_PDM_MCLK, "pdm_mclk", 0, 15, 2,
+ JH71X0_GATE(JH7100_AUDCLK_PDM_APB, "pdm_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0__GMD(JH7100_AUDCLK_PDM_MCLK, "pdm_mclk", 0, 15, 2,
JH7100_AUDCLK_AUDIO_SRC,
JH7100_AUDCLK_AUDIO_12288),
- JH7100_GATE(JH7100_AUDCLK_I2SVAD_APB, "i2svad_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100__GMD(JH7100_AUDCLK_SPDIF, "spdif", 0, 15, 2,
+ JH71X0_GATE(JH7100_AUDCLK_I2SVAD_APB, "i2svad_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0__GMD(JH7100_AUDCLK_SPDIF, "spdif", 0, 15, 2,
JH7100_AUDCLK_AUDIO_SRC,
JH7100_AUDCLK_AUDIO_12288),
- JH7100_GATE(JH7100_AUDCLK_SPDIF_APB, "spdif_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100_GATE(JH7100_AUDCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100__GMD(JH7100_AUDCLK_DAC_MCLK, "dac_mclk", 0, 15, 2,
+ JH71X0_GATE(JH7100_AUDCLK_SPDIF_APB, "spdif_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0_GATE(JH7100_AUDCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0__GMD(JH7100_AUDCLK_DAC_MCLK, "dac_mclk", 0, 15, 2,
JH7100_AUDCLK_AUDIO_SRC,
JH7100_AUDCLK_AUDIO_12288),
- JH7100_GATE(JH7100_AUDCLK_I2SDAC_APB, "i2sdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100_MDIV(JH7100_AUDCLK_I2SDAC_BCLK, "i2sdac_bclk", 31, 2,
+ JH71X0_GATE(JH7100_AUDCLK_I2SDAC_APB, "i2sdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0_MDIV(JH7100_AUDCLK_I2SDAC_BCLK, "i2sdac_bclk", 31, 2,
JH7100_AUDCLK_DAC_MCLK,
JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
- JH7100__INV(JH7100_AUDCLK_I2SDAC_BCLK_N, "i2sdac_bclk_n", JH7100_AUDCLK_I2SDAC_BCLK),
- JH7100_MDIV(JH7100_AUDCLK_I2SDAC_LRCLK, "i2sdac_lrclk", 31, 2,
+ JH71X0__INV(JH7100_AUDCLK_I2SDAC_BCLK_N, "i2sdac_bclk_n", JH7100_AUDCLK_I2SDAC_BCLK),
+ JH71X0_MDIV(JH7100_AUDCLK_I2SDAC_LRCLK, "i2sdac_lrclk", 31, 2,
JH7100_AUDCLK_I2S1_MCLK,
JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
- JH7100_GATE(JH7100_AUDCLK_I2S1_APB, "i2s1_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100_MDIV(JH7100_AUDCLK_I2S1_BCLK, "i2s1_bclk", 31, 2,
+ JH71X0_GATE(JH7100_AUDCLK_I2S1_APB, "i2s1_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0_MDIV(JH7100_AUDCLK_I2S1_BCLK, "i2s1_bclk", 31, 2,
JH7100_AUDCLK_I2S1_MCLK,
JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
- JH7100__INV(JH7100_AUDCLK_I2S1_BCLK_N, "i2s1_bclk_n", JH7100_AUDCLK_I2S1_BCLK),
- JH7100_MDIV(JH7100_AUDCLK_I2S1_LRCLK, "i2s1_lrclk", 63, 3,
+ JH71X0__INV(JH7100_AUDCLK_I2S1_BCLK_N, "i2s1_bclk_n", JH7100_AUDCLK_I2S1_BCLK),
+ JH71X0_MDIV(JH7100_AUDCLK_I2S1_LRCLK, "i2s1_lrclk", 63, 3,
JH7100_AUDCLK_I2S1_BCLK_N,
JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD),
- JH7100_GATE(JH7100_AUDCLK_I2SDAC16K_APB, "i2s1dac16k_apb", 0, JH7100_AUDCLK_APB0_BUS),
- JH7100__DIV(JH7100_AUDCLK_APB0_BUS, "apb0_bus", 8, JH7100_AUDCLK_DOM7AHB_BUS),
- JH7100_GATE(JH7100_AUDCLK_DMA1P_AHB, "dma1p_ahb", 0, JH7100_AUDCLK_DOM7AHB_BUS),
- JH7100_GATE(JH7100_AUDCLK_USB_APB, "usb_apb", CLK_IGNORE_UNUSED, JH7100_AUDCLK_APB_EN),
- JH7100_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB),
- JH7100_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB),
- JH7100__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS),
- JH7100__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2,
+ JH71X0_GATE(JH7100_AUDCLK_I2SDAC16K_APB, "i2s1dac16k_apb", 0, JH7100_AUDCLK_APB0_BUS),
+ JH71X0__DIV(JH7100_AUDCLK_APB0_BUS, "apb0_bus", 8, JH7100_AUDCLK_DOM7AHB_BUS),
+ JH71X0_GATE(JH7100_AUDCLK_DMA1P_AHB, "dma1p_ahb", 0, JH7100_AUDCLK_DOM7AHB_BUS),
+ JH71X0_GATE(JH7100_AUDCLK_USB_APB, "usb_apb", CLK_IGNORE_UNUSED, JH7100_AUDCLK_APB_EN),
+ JH71X0_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB),
+ JH71X0_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB),
+ JH71X0__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS),
+ JH71X0__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2,
JH7100_AUDCLK_VAD_INTMEM,
JH7100_AUDCLK_AUDIO_12288),
};
static struct clk_hw *jh7100_audclk_get(struct of_phandle_args *clkspec, void *data)
{
- struct jh7100_clk_priv *priv = data;
+ struct jh71x0_clk_priv *priv = data;
unsigned int idx = clkspec->args[0];
if (idx < JH7100_AUDCLK_END)
@@ -98,7 +98,7 @@ static struct clk_hw *jh7100_audclk_get(struct of_phandle_args *clkspec, void *d
static int jh7100_audclk_probe(struct platform_device *pdev)
{
- struct jh7100_clk_priv *priv;
+ struct jh71x0_clk_priv *priv;
unsigned int idx;
int ret;
@@ -117,12 +117,12 @@ static int jh7100_audclk_probe(struct platform_device *pdev)
struct clk_parent_data parents[4] = {};
struct clk_init_data init = {
.name = jh7100_audclk_data[idx].name,
- .ops = starfive_jh7100_clk_ops(max),
+ .ops = starfive_jh71x0_clk_ops(max),
.parent_data = parents,
- .num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
+ .num_parents = ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
.flags = jh7100_audclk_data[idx].flags,
};
- struct jh7100_clk *clk = &priv->reg[idx];
+ struct jh71x0_clk *clk = &priv->reg[idx];
unsigned int i;
for (i = 0; i < init.num_parents; i++) {
@@ -140,7 +140,7 @@ static int jh7100_audclk_probe(struct platform_device *pdev)
clk->hw.init = &init;
clk->idx = idx;
- clk->max_div = max & JH7100_CLK_DIV_MASK;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
ret = devm_clk_hw_register(priv->dev, &clk->hw);
if (ret)
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index eea52f16af0d..bcc9acdd5936 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -15,7 +15,7 @@
#include <dt-bindings/clock/starfive-jh7100.h>
-#include "clk-starfive-jh7100.h"
+#include "clk-starfive-jh71x0.h"
/* external clocks */
#define JH7100_CLK_OSC_SYS (JH7100_CLK_END + 0)
@@ -23,250 +23,250 @@
#define JH7100_CLK_GMAC_RMII_REF (JH7100_CLK_END + 2)
#define JH7100_CLK_GMAC_GR_MII_RX (JH7100_CLK_END + 3)
-static const struct jh7100_clk_data jh7100_clk_data[] __initconst = {
- JH7100__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4,
+static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = {
+ JH71X0__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL1_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 3,
+ JH71X0__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 3,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL1_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 4,
+ JH71X0__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 4,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL1_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 3,
+ JH71X0__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 3,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 2,
+ JH71X0__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 2,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL0_OUT),
- JH7100__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 2,
+ JH71X0__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 2,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 3,
+ JH71X0__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 3,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL1_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 3,
+ JH71X0__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 3,
JH7100_CLK_OSC_AUD,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100_GDIV(JH7100_CLK_AUDIO_ROOT, "audio_root", 0, 8, JH7100_CLK_PLL0_OUT),
- JH7100__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 3,
+ JH71X0_GDIV(JH7100_CLK_AUDIO_ROOT, "audio_root", 0, 8, JH7100_CLK_PLL0_OUT),
+ JH71X0__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 3,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL1_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 3,
+ JH71X0__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 3,
JH7100_CLK_OSC_SYS,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL1_OUT),
- JH7100__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 3,
+ JH71X0__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 3,
JH7100_CLK_OSC_AUD,
JH7100_CLK_PLL0_OUT,
JH7100_CLK_PLL2_OUT),
- JH7100__DIV(JH7100_CLK_CPUNBUS_ROOT_DIV, "cpunbus_root_div", 2, JH7100_CLK_CPUNDBUS_ROOT),
- JH7100__DIV(JH7100_CLK_DSP_ROOT_DIV, "dsp_root_div", 4, JH7100_CLK_DSP_ROOT),
- JH7100__DIV(JH7100_CLK_PERH0_SRC, "perh0_src", 4, JH7100_CLK_PERH0_ROOT),
- JH7100__DIV(JH7100_CLK_PERH1_SRC, "perh1_src", 4, JH7100_CLK_PERH1_ROOT),
- JH7100_GDIV(JH7100_CLK_PLL0_TESTOUT, "pll0_testout", 0, 31, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_PLL1_TESTOUT, "pll1_testout", 0, 31, JH7100_CLK_DLA_ROOT),
- JH7100_GDIV(JH7100_CLK_PLL2_TESTOUT, "pll2_testout", 0, 31, JH7100_CLK_PERH1_SRC),
- JH7100__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 2,
+ JH71X0__DIV(JH7100_CLK_CPUNBUS_ROOT_DIV, "cpunbus_root_div", 2, JH7100_CLK_CPUNDBUS_ROOT),
+ JH71X0__DIV(JH7100_CLK_DSP_ROOT_DIV, "dsp_root_div", 4, JH7100_CLK_DSP_ROOT),
+ JH71X0__DIV(JH7100_CLK_PERH0_SRC, "perh0_src", 4, JH7100_CLK_PERH0_ROOT),
+ JH71X0__DIV(JH7100_CLK_PERH1_SRC, "perh1_src", 4, JH7100_CLK_PERH1_ROOT),
+ JH71X0_GDIV(JH7100_CLK_PLL0_TESTOUT, "pll0_testout", 0, 31, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_PLL1_TESTOUT, "pll1_testout", 0, 31, JH7100_CLK_DLA_ROOT),
+ JH71X0_GDIV(JH7100_CLK_PLL2_TESTOUT, "pll2_testout", 0, 31, JH7100_CLK_PERH1_SRC),
+ JH71X0__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 2,
JH7100_CLK_OSC_SYS,
JH7100_CLK_OSC_AUD),
- JH7100__DIV(JH7100_CLK_CPU_CORE, "cpu_core", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100__DIV(JH7100_CLK_CPU_AXI, "cpu_axi", 8, JH7100_CLK_CPU_CORE),
- JH7100__DIV(JH7100_CLK_AHB_BUS, "ahb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100__DIV(JH7100_CLK_APB1_BUS, "apb1_bus", 8, JH7100_CLK_AHB_BUS),
- JH7100__DIV(JH7100_CLK_APB2_BUS, "apb2_bus", 8, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_DOM3AHB_BUS, "dom3ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_DOM7AHB_BUS, "dom7ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_U74_CORE0, "u74_core0", CLK_IS_CRITICAL, JH7100_CLK_CPU_CORE),
- JH7100_GDIV(JH7100_CLK_U74_CORE1, "u74_core1", CLK_IS_CRITICAL, 8, JH7100_CLK_CPU_CORE),
- JH7100_GATE(JH7100_CLK_U74_AXI, "u74_axi", CLK_IS_CRITICAL, JH7100_CLK_CPU_AXI),
- JH7100_GATE(JH7100_CLK_U74RTC_TOGGLE, "u74rtc_toggle", CLK_IS_CRITICAL, JH7100_CLK_OSC_SYS),
- JH7100_GATE(JH7100_CLK_SGDMA2P_AXI, "sgdma2p_axi", 0, JH7100_CLK_CPU_AXI),
- JH7100_GATE(JH7100_CLK_DMA2PNOC_AXI, "dma2pnoc_axi", 0, JH7100_CLK_CPU_AXI),
- JH7100_GATE(JH7100_CLK_SGDMA2P_AHB, "sgdma2p_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100__DIV(JH7100_CLK_DLA_BUS, "dla_bus", 4, JH7100_CLK_DLA_ROOT),
- JH7100_GATE(JH7100_CLK_DLA_AXI, "dla_axi", 0, JH7100_CLK_DLA_BUS),
- JH7100_GATE(JH7100_CLK_DLANOC_AXI, "dlanoc_axi", 0, JH7100_CLK_DLA_BUS),
- JH7100_GATE(JH7100_CLK_DLA_APB, "dla_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_VP6_CORE, "vp6_core", 0, 4, JH7100_CLK_DSP_ROOT_DIV),
- JH7100__DIV(JH7100_CLK_VP6BUS_SRC, "vp6bus_src", 4, JH7100_CLK_DSP_ROOT),
- JH7100_GDIV(JH7100_CLK_VP6_AXI, "vp6_axi", 0, 4, JH7100_CLK_VP6BUS_SRC),
- JH7100__DIV(JH7100_CLK_VCDECBUS_SRC, "vcdecbus_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
- JH7100__DIV(JH7100_CLK_VDEC_BUS, "vdec_bus", 8, JH7100_CLK_VCDECBUS_SRC),
- JH7100_GATE(JH7100_CLK_VDEC_AXI, "vdec_axi", 0, JH7100_CLK_VDEC_BUS),
- JH7100_GATE(JH7100_CLK_VDECBRG_MAIN, "vdecbrg_mainclk", 0, JH7100_CLK_VDEC_BUS),
- JH7100_GDIV(JH7100_CLK_VDEC_BCLK, "vdec_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
- JH7100_GDIV(JH7100_CLK_VDEC_CCLK, "vdec_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
- JH7100_GATE(JH7100_CLK_VDEC_APB, "vdec_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_JPEG_AXI, "jpeg_axi", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100_GDIV(JH7100_CLK_JPEG_CCLK, "jpeg_cclk", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100_GATE(JH7100_CLK_JPEG_APB, "jpeg_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_GC300_2X, "gc300_2x", 0, 8, JH7100_CLK_CDECHIFI4_ROOT),
- JH7100_GATE(JH7100_CLK_GC300_AHB, "gc300_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100__DIV(JH7100_CLK_JPCGC300_AXIBUS, "jpcgc300_axibus", 8, JH7100_CLK_VCDECBUS_SRC),
- JH7100_GATE(JH7100_CLK_GC300_AXI, "gc300_axi", 0, JH7100_CLK_JPCGC300_AXIBUS),
- JH7100_GATE(JH7100_CLK_JPCGC300_MAIN, "jpcgc300_mainclk", 0, JH7100_CLK_JPCGC300_AXIBUS),
- JH7100__DIV(JH7100_CLK_VENC_BUS, "venc_bus", 8, JH7100_CLK_VCDECBUS_SRC),
- JH7100_GATE(JH7100_CLK_VENC_AXI, "venc_axi", 0, JH7100_CLK_VENC_BUS),
- JH7100_GATE(JH7100_CLK_VENCBRG_MAIN, "vencbrg_mainclk", 0, JH7100_CLK_VENC_BUS),
- JH7100_GDIV(JH7100_CLK_VENC_BCLK, "venc_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
- JH7100_GDIV(JH7100_CLK_VENC_CCLK, "venc_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
- JH7100_GATE(JH7100_CLK_VENC_APB, "venc_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_DDRPLL_DIV2, "ddrpll_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_PLL1_OUT),
- JH7100_GDIV(JH7100_CLK_DDRPLL_DIV4, "ddrpll_div4", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV2),
- JH7100_GDIV(JH7100_CLK_DDRPLL_DIV8, "ddrpll_div8", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV4),
- JH7100_GDIV(JH7100_CLK_DDROSC_DIV2, "ddrosc_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_OSC_SYS),
- JH7100_GMUX(JH7100_CLK_DDRC0, "ddrc0", CLK_IS_CRITICAL, 4,
+ JH71X0__DIV(JH7100_CLK_CPU_CORE, "cpu_core", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0__DIV(JH7100_CLK_CPU_AXI, "cpu_axi", 8, JH7100_CLK_CPU_CORE),
+ JH71X0__DIV(JH7100_CLK_AHB_BUS, "ahb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0__DIV(JH7100_CLK_APB1_BUS, "apb1_bus", 8, JH7100_CLK_AHB_BUS),
+ JH71X0__DIV(JH7100_CLK_APB2_BUS, "apb2_bus", 8, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_DOM3AHB_BUS, "dom3ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_DOM7AHB_BUS, "dom7ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_U74_CORE0, "u74_core0", CLK_IS_CRITICAL, JH7100_CLK_CPU_CORE),
+ JH71X0_GDIV(JH7100_CLK_U74_CORE1, "u74_core1", CLK_IS_CRITICAL, 8, JH7100_CLK_CPU_CORE),
+ JH71X0_GATE(JH7100_CLK_U74_AXI, "u74_axi", CLK_IS_CRITICAL, JH7100_CLK_CPU_AXI),
+ JH71X0_GATE(JH7100_CLK_U74RTC_TOGGLE, "u74rtc_toggle", CLK_IS_CRITICAL, JH7100_CLK_OSC_SYS),
+ JH71X0_GATE(JH7100_CLK_SGDMA2P_AXI, "sgdma2p_axi", 0, JH7100_CLK_CPU_AXI),
+ JH71X0_GATE(JH7100_CLK_DMA2PNOC_AXI, "dma2pnoc_axi", 0, JH7100_CLK_CPU_AXI),
+ JH71X0_GATE(JH7100_CLK_SGDMA2P_AHB, "sgdma2p_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0__DIV(JH7100_CLK_DLA_BUS, "dla_bus", 4, JH7100_CLK_DLA_ROOT),
+ JH71X0_GATE(JH7100_CLK_DLA_AXI, "dla_axi", 0, JH7100_CLK_DLA_BUS),
+ JH71X0_GATE(JH7100_CLK_DLANOC_AXI, "dlanoc_axi", 0, JH7100_CLK_DLA_BUS),
+ JH71X0_GATE(JH7100_CLK_DLA_APB, "dla_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_VP6_CORE, "vp6_core", 0, 4, JH7100_CLK_DSP_ROOT_DIV),
+ JH71X0__DIV(JH7100_CLK_VP6BUS_SRC, "vp6bus_src", 4, JH7100_CLK_DSP_ROOT),
+ JH71X0_GDIV(JH7100_CLK_VP6_AXI, "vp6_axi", 0, 4, JH7100_CLK_VP6BUS_SRC),
+ JH71X0__DIV(JH7100_CLK_VCDECBUS_SRC, "vcdecbus_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
+ JH71X0__DIV(JH7100_CLK_VDEC_BUS, "vdec_bus", 8, JH7100_CLK_VCDECBUS_SRC),
+ JH71X0_GATE(JH7100_CLK_VDEC_AXI, "vdec_axi", 0, JH7100_CLK_VDEC_BUS),
+ JH71X0_GATE(JH7100_CLK_VDECBRG_MAIN, "vdecbrg_mainclk", 0, JH7100_CLK_VDEC_BUS),
+ JH71X0_GDIV(JH7100_CLK_VDEC_BCLK, "vdec_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
+ JH71X0_GDIV(JH7100_CLK_VDEC_CCLK, "vdec_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
+ JH71X0_GATE(JH7100_CLK_VDEC_APB, "vdec_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_JPEG_AXI, "jpeg_axi", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0_GDIV(JH7100_CLK_JPEG_CCLK, "jpeg_cclk", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0_GATE(JH7100_CLK_JPEG_APB, "jpeg_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_GC300_2X, "gc300_2x", 0, 8, JH7100_CLK_CDECHIFI4_ROOT),
+ JH71X0_GATE(JH7100_CLK_GC300_AHB, "gc300_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0__DIV(JH7100_CLK_JPCGC300_AXIBUS, "jpcgc300_axibus", 8, JH7100_CLK_VCDECBUS_SRC),
+ JH71X0_GATE(JH7100_CLK_GC300_AXI, "gc300_axi", 0, JH7100_CLK_JPCGC300_AXIBUS),
+ JH71X0_GATE(JH7100_CLK_JPCGC300_MAIN, "jpcgc300_mainclk", 0, JH7100_CLK_JPCGC300_AXIBUS),
+ JH71X0__DIV(JH7100_CLK_VENC_BUS, "venc_bus", 8, JH7100_CLK_VCDECBUS_SRC),
+ JH71X0_GATE(JH7100_CLK_VENC_AXI, "venc_axi", 0, JH7100_CLK_VENC_BUS),
+ JH71X0_GATE(JH7100_CLK_VENCBRG_MAIN, "vencbrg_mainclk", 0, JH7100_CLK_VENC_BUS),
+ JH71X0_GDIV(JH7100_CLK_VENC_BCLK, "venc_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
+ JH71X0_GDIV(JH7100_CLK_VENC_CCLK, "venc_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
+ JH71X0_GATE(JH7100_CLK_VENC_APB, "venc_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV2, "ddrpll_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_PLL1_OUT),
+ JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV4, "ddrpll_div4", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV2),
+ JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV8, "ddrpll_div8", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV4),
+ JH71X0_GDIV(JH7100_CLK_DDROSC_DIV2, "ddrosc_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_OSC_SYS),
+ JH71X0_GMUX(JH7100_CLK_DDRC0, "ddrc0", CLK_IS_CRITICAL, 4,
JH7100_CLK_DDROSC_DIV2,
JH7100_CLK_DDRPLL_DIV2,
JH7100_CLK_DDRPLL_DIV4,
JH7100_CLK_DDRPLL_DIV8),
- JH7100_GMUX(JH7100_CLK_DDRC1, "ddrc1", CLK_IS_CRITICAL, 4,
+ JH71X0_GMUX(JH7100_CLK_DDRC1, "ddrc1", CLK_IS_CRITICAL, 4,
JH7100_CLK_DDROSC_DIV2,
JH7100_CLK_DDRPLL_DIV2,
JH7100_CLK_DDRPLL_DIV4,
JH7100_CLK_DDRPLL_DIV8),
- JH7100_GATE(JH7100_CLK_DDRPHY_APB, "ddrphy_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100__DIV(JH7100_CLK_NOC_ROB, "noc_rob", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100__DIV(JH7100_CLK_NOC_COG, "noc_cog", 8, JH7100_CLK_DLA_ROOT),
- JH7100_GATE(JH7100_CLK_NNE_AHB, "nne_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100__DIV(JH7100_CLK_NNEBUS_SRC1, "nnebus_src1", 4, JH7100_CLK_DSP_ROOT),
- JH7100__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 2,
+ JH71X0_GATE(JH7100_CLK_DDRPHY_APB, "ddrphy_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0__DIV(JH7100_CLK_NOC_ROB, "noc_rob", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0__DIV(JH7100_CLK_NOC_COG, "noc_cog", 8, JH7100_CLK_DLA_ROOT),
+ JH71X0_GATE(JH7100_CLK_NNE_AHB, "nne_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0__DIV(JH7100_CLK_NNEBUS_SRC1, "nnebus_src1", 4, JH7100_CLK_DSP_ROOT),
+ JH71X0__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 2,
JH7100_CLK_CPU_AXI,
JH7100_CLK_NNEBUS_SRC1),
- JH7100_GATE(JH7100_CLK_NNE_AXI, "nne_axi", 0, JH7100_CLK_NNE_BUS),
- JH7100_GATE(JH7100_CLK_NNENOC_AXI, "nnenoc_axi", 0, JH7100_CLK_NNE_BUS),
- JH7100_GATE(JH7100_CLK_DLASLV_AXI, "dlaslv_axi", 0, JH7100_CLK_NNE_BUS),
- JH7100_GATE(JH7100_CLK_DSPX2C_AXI, "dspx2c_axi", CLK_IS_CRITICAL, JH7100_CLK_NNE_BUS),
- JH7100__DIV(JH7100_CLK_HIFI4_SRC, "hifi4_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
- JH7100__DIV(JH7100_CLK_HIFI4_COREFREE, "hifi4_corefree", 8, JH7100_CLK_HIFI4_SRC),
- JH7100_GATE(JH7100_CLK_HIFI4_CORE, "hifi4_core", 0, JH7100_CLK_HIFI4_COREFREE),
- JH7100__DIV(JH7100_CLK_HIFI4_BUS, "hifi4_bus", 8, JH7100_CLK_HIFI4_COREFREE),
- JH7100_GATE(JH7100_CLK_HIFI4_AXI, "hifi4_axi", 0, JH7100_CLK_HIFI4_BUS),
- JH7100_GATE(JH7100_CLK_HIFI4NOC_AXI, "hifi4noc_axi", 0, JH7100_CLK_HIFI4_BUS),
- JH7100__DIV(JH7100_CLK_SGDMA1P_BUS, "sgdma1p_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100_GATE(JH7100_CLK_SGDMA1P_AXI, "sgdma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
- JH7100_GATE(JH7100_CLK_DMA1P_AXI, "dma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
- JH7100_GDIV(JH7100_CLK_X2C_AXI, "x2c_axi", CLK_IS_CRITICAL, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100__DIV(JH7100_CLK_USB_BUS, "usb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
- JH7100_GATE(JH7100_CLK_USB_AXI, "usb_axi", 0, JH7100_CLK_USB_BUS),
- JH7100_GATE(JH7100_CLK_USBNOC_AXI, "usbnoc_axi", 0, JH7100_CLK_USB_BUS),
- JH7100__DIV(JH7100_CLK_USBPHY_ROOTDIV, "usbphy_rootdiv", 4, JH7100_CLK_GMACUSB_ROOT),
- JH7100_GDIV(JH7100_CLK_USBPHY_125M, "usbphy_125m", 0, 8, JH7100_CLK_USBPHY_ROOTDIV),
- JH7100_GDIV(JH7100_CLK_USBPHY_PLLDIV25M, "usbphy_plldiv25m", 0, 32, JH7100_CLK_USBPHY_ROOTDIV),
- JH7100__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2,
+ JH71X0_GATE(JH7100_CLK_NNE_AXI, "nne_axi", 0, JH7100_CLK_NNE_BUS),
+ JH71X0_GATE(JH7100_CLK_NNENOC_AXI, "nnenoc_axi", 0, JH7100_CLK_NNE_BUS),
+ JH71X0_GATE(JH7100_CLK_DLASLV_AXI, "dlaslv_axi", 0, JH7100_CLK_NNE_BUS),
+ JH71X0_GATE(JH7100_CLK_DSPX2C_AXI, "dspx2c_axi", CLK_IS_CRITICAL, JH7100_CLK_NNE_BUS),
+ JH71X0__DIV(JH7100_CLK_HIFI4_SRC, "hifi4_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
+ JH71X0__DIV(JH7100_CLK_HIFI4_COREFREE, "hifi4_corefree", 8, JH7100_CLK_HIFI4_SRC),
+ JH71X0_GATE(JH7100_CLK_HIFI4_CORE, "hifi4_core", 0, JH7100_CLK_HIFI4_COREFREE),
+ JH71X0__DIV(JH7100_CLK_HIFI4_BUS, "hifi4_bus", 8, JH7100_CLK_HIFI4_COREFREE),
+ JH71X0_GATE(JH7100_CLK_HIFI4_AXI, "hifi4_axi", 0, JH7100_CLK_HIFI4_BUS),
+ JH71X0_GATE(JH7100_CLK_HIFI4NOC_AXI, "hifi4noc_axi", 0, JH7100_CLK_HIFI4_BUS),
+ JH71X0__DIV(JH7100_CLK_SGDMA1P_BUS, "sgdma1p_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0_GATE(JH7100_CLK_SGDMA1P_AXI, "sgdma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
+ JH71X0_GATE(JH7100_CLK_DMA1P_AXI, "dma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
+ JH71X0_GDIV(JH7100_CLK_X2C_AXI, "x2c_axi", CLK_IS_CRITICAL, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0__DIV(JH7100_CLK_USB_BUS, "usb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
+ JH71X0_GATE(JH7100_CLK_USB_AXI, "usb_axi", 0, JH7100_CLK_USB_BUS),
+ JH71X0_GATE(JH7100_CLK_USBNOC_AXI, "usbnoc_axi", 0, JH7100_CLK_USB_BUS),
+ JH71X0__DIV(JH7100_CLK_USBPHY_ROOTDIV, "usbphy_rootdiv", 4, JH7100_CLK_GMACUSB_ROOT),
+ JH71X0_GDIV(JH7100_CLK_USBPHY_125M, "usbphy_125m", 0, 8, JH7100_CLK_USBPHY_ROOTDIV),
+ JH71X0_GDIV(JH7100_CLK_USBPHY_PLLDIV25M, "usbphy_plldiv25m", 0, 32, JH7100_CLK_USBPHY_ROOTDIV),
+ JH71X0__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2,
JH7100_CLK_OSC_SYS,
JH7100_CLK_USBPHY_PLLDIV25M),
- JH7100_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT),
- JH7100_GATE(JH7100_CLK_AUDIO_SRC, "audio_src", 0, JH7100_CLK_AUDIO_DIV),
- JH7100_GATE(JH7100_CLK_AUDIO_12288, "audio_12288", 0, JH7100_CLK_OSC_AUD),
- JH7100_GDIV(JH7100_CLK_VIN_SRC, "vin_src", 0, 4, JH7100_CLK_VIN_ROOT),
- JH7100__DIV(JH7100_CLK_ISP0_BUS, "isp0_bus", 8, JH7100_CLK_VIN_SRC),
- JH7100_GATE(JH7100_CLK_ISP0_AXI, "isp0_axi", 0, JH7100_CLK_ISP0_BUS),
- JH7100_GATE(JH7100_CLK_ISP0NOC_AXI, "isp0noc_axi", 0, JH7100_CLK_ISP0_BUS),
- JH7100_GATE(JH7100_CLK_ISPSLV_AXI, "ispslv_axi", 0, JH7100_CLK_ISP0_BUS),
- JH7100__DIV(JH7100_CLK_ISP1_BUS, "isp1_bus", 8, JH7100_CLK_VIN_SRC),
- JH7100_GATE(JH7100_CLK_ISP1_AXI, "isp1_axi", 0, JH7100_CLK_ISP1_BUS),
- JH7100_GATE(JH7100_CLK_ISP1NOC_AXI, "isp1noc_axi", 0, JH7100_CLK_ISP1_BUS),
- JH7100__DIV(JH7100_CLK_VIN_BUS, "vin_bus", 8, JH7100_CLK_VIN_SRC),
- JH7100_GATE(JH7100_CLK_VIN_AXI, "vin_axi", 0, JH7100_CLK_VIN_BUS),
- JH7100_GATE(JH7100_CLK_VINNOC_AXI, "vinnoc_axi", 0, JH7100_CLK_VIN_BUS),
- JH7100_GDIV(JH7100_CLK_VOUT_SRC, "vout_src", 0, 4, JH7100_CLK_VOUT_ROOT),
- JH7100__DIV(JH7100_CLK_DISPBUS_SRC, "dispbus_src", 4, JH7100_CLK_VOUTBUS_ROOT),
- JH7100__DIV(JH7100_CLK_DISP_BUS, "disp_bus", 4, JH7100_CLK_DISPBUS_SRC),
- JH7100_GATE(JH7100_CLK_DISP_AXI, "disp_axi", 0, JH7100_CLK_DISP_BUS),
- JH7100_GATE(JH7100_CLK_DISPNOC_AXI, "dispnoc_axi", 0, JH7100_CLK_DISP_BUS),
- JH7100_GATE(JH7100_CLK_SDIO0_AHB, "sdio0_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GDIV(JH7100_CLK_SDIO0_CCLKINT, "sdio0_cclkint", 0, 24, JH7100_CLK_PERH0_SRC),
- JH7100__INV(JH7100_CLK_SDIO0_CCLKINT_INV, "sdio0_cclkint_inv", JH7100_CLK_SDIO0_CCLKINT),
- JH7100_GATE(JH7100_CLK_SDIO1_AHB, "sdio1_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GDIV(JH7100_CLK_SDIO1_CCLKINT, "sdio1_cclkint", 0, 24, JH7100_CLK_PERH1_SRC),
- JH7100__INV(JH7100_CLK_SDIO1_CCLKINT_INV, "sdio1_cclkint_inv", JH7100_CLK_SDIO1_CCLKINT),
- JH7100_GATE(JH7100_CLK_GMAC_AHB, "gmac_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100__DIV(JH7100_CLK_GMAC_ROOT_DIV, "gmac_root_div", 8, JH7100_CLK_GMACUSB_ROOT),
- JH7100_GDIV(JH7100_CLK_GMAC_PTP_REF, "gmac_ptp_refclk", 0, 31, JH7100_CLK_GMAC_ROOT_DIV),
- JH7100_GDIV(JH7100_CLK_GMAC_GTX, "gmac_gtxclk", 0, 255, JH7100_CLK_GMAC_ROOT_DIV),
- JH7100_GDIV(JH7100_CLK_GMAC_RMII_TX, "gmac_rmii_txclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
- JH7100_GDIV(JH7100_CLK_GMAC_RMII_RX, "gmac_rmii_rxclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
- JH7100__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", 3,
+ JH71X0_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT),
+ JH71X0_GATE(JH7100_CLK_AUDIO_SRC, "audio_src", 0, JH7100_CLK_AUDIO_DIV),
+ JH71X0_GATE(JH7100_CLK_AUDIO_12288, "audio_12288", 0, JH7100_CLK_OSC_AUD),
+ JH71X0_GDIV(JH7100_CLK_VIN_SRC, "vin_src", 0, 4, JH7100_CLK_VIN_ROOT),
+ JH71X0__DIV(JH7100_CLK_ISP0_BUS, "isp0_bus", 8, JH7100_CLK_VIN_SRC),
+ JH71X0_GATE(JH7100_CLK_ISP0_AXI, "isp0_axi", 0, JH7100_CLK_ISP0_BUS),
+ JH71X0_GATE(JH7100_CLK_ISP0NOC_AXI, "isp0noc_axi", 0, JH7100_CLK_ISP0_BUS),
+ JH71X0_GATE(JH7100_CLK_ISPSLV_AXI, "ispslv_axi", 0, JH7100_CLK_ISP0_BUS),
+ JH71X0__DIV(JH7100_CLK_ISP1_BUS, "isp1_bus", 8, JH7100_CLK_VIN_SRC),
+ JH71X0_GATE(JH7100_CLK_ISP1_AXI, "isp1_axi", 0, JH7100_CLK_ISP1_BUS),
+ JH71X0_GATE(JH7100_CLK_ISP1NOC_AXI, "isp1noc_axi", 0, JH7100_CLK_ISP1_BUS),
+ JH71X0__DIV(JH7100_CLK_VIN_BUS, "vin_bus", 8, JH7100_CLK_VIN_SRC),
+ JH71X0_GATE(JH7100_CLK_VIN_AXI, "vin_axi", 0, JH7100_CLK_VIN_BUS),
+ JH71X0_GATE(JH7100_CLK_VINNOC_AXI, "vinnoc_axi", 0, JH7100_CLK_VIN_BUS),
+ JH71X0_GDIV(JH7100_CLK_VOUT_SRC, "vout_src", 0, 4, JH7100_CLK_VOUT_ROOT),
+ JH71X0__DIV(JH7100_CLK_DISPBUS_SRC, "dispbus_src", 4, JH7100_CLK_VOUTBUS_ROOT),
+ JH71X0__DIV(JH7100_CLK_DISP_BUS, "disp_bus", 4, JH7100_CLK_DISPBUS_SRC),
+ JH71X0_GATE(JH7100_CLK_DISP_AXI, "disp_axi", 0, JH7100_CLK_DISP_BUS),
+ JH71X0_GATE(JH7100_CLK_DISPNOC_AXI, "dispnoc_axi", 0, JH7100_CLK_DISP_BUS),
+ JH71X0_GATE(JH7100_CLK_SDIO0_AHB, "sdio0_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GDIV(JH7100_CLK_SDIO0_CCLKINT, "sdio0_cclkint", 0, 24, JH7100_CLK_PERH0_SRC),
+ JH71X0__INV(JH7100_CLK_SDIO0_CCLKINT_INV, "sdio0_cclkint_inv", JH7100_CLK_SDIO0_CCLKINT),
+ JH71X0_GATE(JH7100_CLK_SDIO1_AHB, "sdio1_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GDIV(JH7100_CLK_SDIO1_CCLKINT, "sdio1_cclkint", 0, 24, JH7100_CLK_PERH1_SRC),
+ JH71X0__INV(JH7100_CLK_SDIO1_CCLKINT_INV, "sdio1_cclkint_inv", JH7100_CLK_SDIO1_CCLKINT),
+ JH71X0_GATE(JH7100_CLK_GMAC_AHB, "gmac_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0__DIV(JH7100_CLK_GMAC_ROOT_DIV, "gmac_root_div", 8, JH7100_CLK_GMACUSB_ROOT),
+ JH71X0_GDIV(JH7100_CLK_GMAC_PTP_REF, "gmac_ptp_refclk", 0, 31, JH7100_CLK_GMAC_ROOT_DIV),
+ JH71X0_GDIV(JH7100_CLK_GMAC_GTX, "gmac_gtxclk", 0, 255, JH7100_CLK_GMAC_ROOT_DIV),
+ JH71X0_GDIV(JH7100_CLK_GMAC_RMII_TX, "gmac_rmii_txclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
+ JH71X0_GDIV(JH7100_CLK_GMAC_RMII_RX, "gmac_rmii_rxclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
+ JH71X0__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", 3,
JH7100_CLK_GMAC_GTX,
JH7100_CLK_GMAC_TX_INV,
JH7100_CLK_GMAC_RMII_TX),
- JH7100__INV(JH7100_CLK_GMAC_TX_INV, "gmac_tx_inv", JH7100_CLK_GMAC_TX),
- JH7100__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 2,
+ JH71X0__INV(JH7100_CLK_GMAC_TX_INV, "gmac_tx_inv", JH7100_CLK_GMAC_TX),
+ JH71X0__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 2,
JH7100_CLK_GMAC_GR_MII_RX,
JH7100_CLK_GMAC_RMII_RX),
- JH7100__INV(JH7100_CLK_GMAC_RX_INV, "gmac_rx_inv", JH7100_CLK_GMAC_RX_PRE),
- JH7100_GATE(JH7100_CLK_GMAC_RMII, "gmac_rmii", 0, JH7100_CLK_GMAC_RMII_REF),
- JH7100_GDIV(JH7100_CLK_GMAC_TOPHYREF, "gmac_tophyref", 0, 127, JH7100_CLK_GMAC_ROOT_DIV),
- JH7100_GATE(JH7100_CLK_SPI2AHB_AHB, "spi2ahb_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GDIV(JH7100_CLK_SPI2AHB_CORE, "spi2ahb_core", 0, 31, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_EZMASTER_AHB, "ezmaster_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_E24_AHB, "e24_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_E24RTC_TOGGLE, "e24rtc_toggle", 0, JH7100_CLK_OSC_SYS),
- JH7100_GATE(JH7100_CLK_QSPI_AHB, "qspi_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_QSPI_APB, "qspi_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_QSPI_REF, "qspi_refclk", 0, 31, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_SEC_AHB, "sec_ahb", 0, JH7100_CLK_AHB_BUS),
- JH7100_GATE(JH7100_CLK_AES, "aes_clk", 0, JH7100_CLK_SEC_AHB),
- JH7100_GATE(JH7100_CLK_SHA, "sha_clk", 0, JH7100_CLK_SEC_AHB),
- JH7100_GATE(JH7100_CLK_PKA, "pka_clk", 0, JH7100_CLK_SEC_AHB),
- JH7100_GATE(JH7100_CLK_TRNG_APB, "trng_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GATE(JH7100_CLK_OTP_APB, "otp_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GATE(JH7100_CLK_UART0_APB, "uart0_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_UART0_CORE, "uart0_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_UART1_APB, "uart1_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_UART1_CORE, "uart1_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_SPI0_APB, "spi0_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_SPI0_CORE, "spi0_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_SPI1_APB, "spi1_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_SPI1_CORE, "spi1_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_I2C0_APB, "i2c0_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_I2C0_CORE, "i2c0_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_I2C1_APB, "i2c1_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GDIV(JH7100_CLK_I2C1_CORE, "i2c1_core", 0, 63, JH7100_CLK_PERH1_SRC),
- JH7100_GATE(JH7100_CLK_GPIO_APB, "gpio_apb", 0, JH7100_CLK_APB1_BUS),
- JH7100_GATE(JH7100_CLK_UART2_APB, "uart2_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_UART2_CORE, "uart2_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_UART3_APB, "uart3_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_UART3_CORE, "uart3_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_SPI2_APB, "spi2_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_SPI2_CORE, "spi2_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_SPI3_APB, "spi3_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_SPI3_CORE, "spi3_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_I2C2_APB, "i2c2_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_I2C2_CORE, "i2c2_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_I2C3_APB, "i2c3_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_I2C3_CORE, "i2c3_core", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_WDTIMER_APB, "wdtimer_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_WDT_CORE, "wdt_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER0_CORE, "timer0_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER1_CORE, "timer1_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER2_CORE, "timer2_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER3_CORE, "timer3_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER4_CORE, "timer4_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER5_CORE, "timer5_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GDIV(JH7100_CLK_TIMER6_CORE, "timer6_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
- JH7100_GATE(JH7100_CLK_VP6INTC_APB, "vp6intc_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GATE(JH7100_CLK_PWM_APB, "pwm_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GATE(JH7100_CLK_MSI_APB, "msi_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GATE(JH7100_CLK_TEMP_APB, "temp_apb", 0, JH7100_CLK_APB2_BUS),
- JH7100_GDIV(JH7100_CLK_TEMP_SENSE, "temp_sense", 0, 31, JH7100_CLK_OSC_SYS),
- JH7100_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0__INV(JH7100_CLK_GMAC_RX_INV, "gmac_rx_inv", JH7100_CLK_GMAC_RX_PRE),
+ JH71X0_GATE(JH7100_CLK_GMAC_RMII, "gmac_rmii", 0, JH7100_CLK_GMAC_RMII_REF),
+ JH71X0_GDIV(JH7100_CLK_GMAC_TOPHYREF, "gmac_tophyref", 0, 127, JH7100_CLK_GMAC_ROOT_DIV),
+ JH71X0_GATE(JH7100_CLK_SPI2AHB_AHB, "spi2ahb_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GDIV(JH7100_CLK_SPI2AHB_CORE, "spi2ahb_core", 0, 31, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_EZMASTER_AHB, "ezmaster_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_E24_AHB, "e24_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_E24RTC_TOGGLE, "e24rtc_toggle", 0, JH7100_CLK_OSC_SYS),
+ JH71X0_GATE(JH7100_CLK_QSPI_AHB, "qspi_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_QSPI_APB, "qspi_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_QSPI_REF, "qspi_refclk", 0, 31, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_SEC_AHB, "sec_ahb", 0, JH7100_CLK_AHB_BUS),
+ JH71X0_GATE(JH7100_CLK_AES, "aes_clk", 0, JH7100_CLK_SEC_AHB),
+ JH71X0_GATE(JH7100_CLK_SHA, "sha_clk", 0, JH7100_CLK_SEC_AHB),
+ JH71X0_GATE(JH7100_CLK_PKA, "pka_clk", 0, JH7100_CLK_SEC_AHB),
+ JH71X0_GATE(JH7100_CLK_TRNG_APB, "trng_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GATE(JH7100_CLK_OTP_APB, "otp_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GATE(JH7100_CLK_UART0_APB, "uart0_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_UART0_CORE, "uart0_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_UART1_APB, "uart1_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_UART1_CORE, "uart1_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_SPI0_APB, "spi0_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_SPI0_CORE, "spi0_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_SPI1_APB, "spi1_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_SPI1_CORE, "spi1_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_I2C0_APB, "i2c0_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_I2C0_CORE, "i2c0_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_I2C1_APB, "i2c1_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GDIV(JH7100_CLK_I2C1_CORE, "i2c1_core", 0, 63, JH7100_CLK_PERH1_SRC),
+ JH71X0_GATE(JH7100_CLK_GPIO_APB, "gpio_apb", 0, JH7100_CLK_APB1_BUS),
+ JH71X0_GATE(JH7100_CLK_UART2_APB, "uart2_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_UART2_CORE, "uart2_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_UART3_APB, "uart3_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_UART3_CORE, "uart3_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_SPI2_APB, "spi2_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_SPI2_CORE, "spi2_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_SPI3_APB, "spi3_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_SPI3_CORE, "spi3_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_I2C2_APB, "i2c2_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_I2C2_CORE, "i2c2_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_I2C3_APB, "i2c3_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_I2C3_CORE, "i2c3_core", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_WDTIMER_APB, "wdtimer_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_WDT_CORE, "wdt_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER0_CORE, "timer0_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER1_CORE, "timer1_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER2_CORE, "timer2_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER3_CORE, "timer3_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER4_CORE, "timer4_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER5_CORE, "timer5_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GDIV(JH7100_CLK_TIMER6_CORE, "timer6_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
+ JH71X0_GATE(JH7100_CLK_VP6INTC_APB, "vp6intc_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GATE(JH7100_CLK_PWM_APB, "pwm_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GATE(JH7100_CLK_MSI_APB, "msi_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GATE(JH7100_CLK_TEMP_APB, "temp_apb", 0, JH7100_CLK_APB2_BUS),
+ JH71X0_GDIV(JH7100_CLK_TEMP_SENSE, "temp_sense", 0, 31, JH7100_CLK_OSC_SYS),
+ JH71X0_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
};
static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data)
{
- struct jh7100_clk_priv *priv = data;
+ struct jh71x0_clk_priv *priv = data;
unsigned int idx = clkspec->args[0];
if (idx < JH7100_CLK_PLL0_OUT)
@@ -280,7 +280,7 @@ static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data
static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
{
- struct jh7100_clk_priv *priv;
+ struct jh71x0_clk_priv *priv;
unsigned int idx;
int ret;
@@ -314,12 +314,12 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
struct clk_parent_data parents[4] = {};
struct clk_init_data init = {
.name = jh7100_clk_data[idx].name,
- .ops = starfive_jh7100_clk_ops(max),
+ .ops = starfive_jh71x0_clk_ops(max),
.parent_data = parents,
- .num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
+ .num_parents = ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
.flags = jh7100_clk_data[idx].flags,
};
- struct jh7100_clk *clk = &priv->reg[idx];
+ struct jh71x0_clk *clk = &priv->reg[idx];
unsigned int i;
for (i = 0; i < init.num_parents; i++) {
@@ -341,7 +341,7 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
clk->hw.init = &init;
clk->idx = idx;
- clk->max_div = max & JH7100_CLK_DIV_MASK;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
ret = devm_clk_hw_register(priv->dev, &clk->hw);
if (ret)
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index 6c07b61b4a32..b372083d11c3 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * StarFive JH7100 Clock Generator Driver
+ * StarFive JH71X0 Clock Generator Driver
*
* Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk>
*/
@@ -10,29 +10,29 @@
#include <linux/device.h>
#include <linux/io.h>
-#include "clk-starfive-jh7100.h"
+#include "clk-starfive-jh71x0.h"
-static struct jh7100_clk *jh7100_clk_from(struct clk_hw *hw)
+static struct jh71x0_clk *jh71x0_clk_from(struct clk_hw *hw)
{
- return container_of(hw, struct jh7100_clk, hw);
+ return container_of(hw, struct jh71x0_clk, hw);
}
-static struct jh7100_clk_priv *jh7100_priv_from(struct jh7100_clk *clk)
+static struct jh71x0_clk_priv *jh71x0_priv_from(struct jh71x0_clk *clk)
{
- return container_of(clk, struct jh7100_clk_priv, reg[clk->idx]);
+ return container_of(clk, struct jh71x0_clk_priv, reg[clk->idx]);
}
-static u32 jh7100_clk_reg_get(struct jh7100_clk *clk)
+static u32 jh71x0_clk_reg_get(struct jh71x0_clk *clk)
{
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
void __iomem *reg = priv->base + 4 * clk->idx;
return readl_relaxed(reg);
}
-static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
+static void jh71x0_clk_reg_rmw(struct jh71x0_clk *clk, u32 mask, u32 value)
{
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
void __iomem *reg = priv->base + 4 * clk->idx;
unsigned long flags;
@@ -42,41 +42,41 @@ static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
spin_unlock_irqrestore(&priv->rmw_lock, flags);
}
-static int jh7100_clk_enable(struct clk_hw *hw)
+static int jh71x0_clk_enable(struct clk_hw *hw)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
- jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, JH7100_CLK_ENABLE);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_ENABLE, JH71X0_CLK_ENABLE);
return 0;
}
-static void jh7100_clk_disable(struct clk_hw *hw)
+static void jh71x0_clk_disable(struct clk_hw *hw)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
- jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, 0);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_ENABLE, 0);
}
-static int jh7100_clk_is_enabled(struct clk_hw *hw)
+static int jh71x0_clk_is_enabled(struct clk_hw *hw)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
- return !!(jh7100_clk_reg_get(clk) & JH7100_CLK_ENABLE);
+ return !!(jh71x0_clk_reg_get(clk) & JH71X0_CLK_ENABLE);
}
-static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
+static unsigned long jh71x0_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 div = jh7100_clk_reg_get(clk) & JH7100_CLK_DIV_MASK;
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ u32 div = jh71x0_clk_reg_get(clk) & JH71X0_CLK_DIV_MASK;
return div ? parent_rate / div : 0;
}
-static int jh7100_clk_determine_rate(struct clk_hw *hw,
+static int jh71x0_clk_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
unsigned long parent = req->best_parent_rate;
unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
@@ -102,232 +102,232 @@ static int jh7100_clk_determine_rate(struct clk_hw *hw,
return 0;
}
-static int jh7100_clk_set_rate(struct clk_hw *hw,
+static int jh71x0_clk_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
1UL, (unsigned long)clk->max_div);
- jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_DIV_MASK, div);
return 0;
}
-static unsigned long jh7100_clk_frac_recalc_rate(struct clk_hw *hw,
+static unsigned long jh71x0_clk_frac_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 reg = jh7100_clk_reg_get(clk);
- unsigned long div100 = 100 * (reg & JH7100_CLK_INT_MASK) +
- ((reg & JH7100_CLK_FRAC_MASK) >> JH7100_CLK_FRAC_SHIFT);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ u32 reg = jh71x0_clk_reg_get(clk);
+ unsigned long div100 = 100 * (reg & JH71X0_CLK_INT_MASK) +
+ ((reg & JH71X0_CLK_FRAC_MASK) >> JH71X0_CLK_FRAC_SHIFT);
- return (div100 >= JH7100_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
+ return (div100 >= JH71X0_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
}
-static int jh7100_clk_frac_determine_rate(struct clk_hw *hw,
+static int jh71x0_clk_frac_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
unsigned long parent100 = 100 * req->best_parent_rate;
unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
unsigned long div100 = clamp(DIV_ROUND_CLOSEST(parent100, rate),
- JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
+ JH71X0_CLK_FRAC_MIN, JH71X0_CLK_FRAC_MAX);
unsigned long result = parent100 / div100;
- /* clamp the result as in jh7100_clk_determine_rate() above */
- if (result > req->max_rate && div100 < JH7100_CLK_FRAC_MAX)
+ /* clamp the result as in jh71x0_clk_determine_rate() above */
+ if (result > req->max_rate && div100 < JH71X0_CLK_FRAC_MAX)
result = parent100 / (div100 + 1);
- if (result < req->min_rate && div100 > JH7100_CLK_FRAC_MIN)
+ if (result < req->min_rate && div100 > JH71X0_CLK_FRAC_MIN)
result = parent100 / (div100 - 1);
req->rate = result;
return 0;
}
-static int jh7100_clk_frac_set_rate(struct clk_hw *hw,
+static int jh71x0_clk_frac_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
unsigned long div100 = clamp(DIV_ROUND_CLOSEST(100 * parent_rate, rate),
- JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
- u32 value = ((div100 % 100) << JH7100_CLK_FRAC_SHIFT) | (div100 / 100);
+ JH71X0_CLK_FRAC_MIN, JH71X0_CLK_FRAC_MAX);
+ u32 value = ((div100 % 100) << JH71X0_CLK_FRAC_SHIFT) | (div100 / 100);
- jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, value);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_DIV_MASK, value);
return 0;
}
-static u8 jh7100_clk_get_parent(struct clk_hw *hw)
+static u8 jh71x0_clk_get_parent(struct clk_hw *hw)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = jh7100_clk_reg_get(clk);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ u32 value = jh71x0_clk_reg_get(clk);
- return (value & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT;
+ return (value & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT;
}
-static int jh7100_clk_set_parent(struct clk_hw *hw, u8 index)
+static int jh71x0_clk_set_parent(struct clk_hw *hw, u8 index)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = (u32)index << JH7100_CLK_MUX_SHIFT;
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ u32 value = (u32)index << JH71X0_CLK_MUX_SHIFT;
- jh7100_clk_reg_rmw(clk, JH7100_CLK_MUX_MASK, value);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_MUX_MASK, value);
return 0;
}
-static int jh7100_clk_mux_determine_rate(struct clk_hw *hw,
+static int jh71x0_clk_mux_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
return clk_mux_determine_rate_flags(hw, req, 0);
}
-static int jh7100_clk_get_phase(struct clk_hw *hw)
+static int jh71x0_clk_get_phase(struct clk_hw *hw)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- u32 value = jh7100_clk_reg_get(clk);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ u32 value = jh71x0_clk_reg_get(clk);
- return (value & JH7100_CLK_INVERT) ? 180 : 0;
+ return (value & JH71X0_CLK_INVERT) ? 180 : 0;
}
-static int jh7100_clk_set_phase(struct clk_hw *hw, int degrees)
+static int jh71x0_clk_set_phase(struct clk_hw *hw, int degrees)
{
- struct jh7100_clk *clk = jh7100_clk_from(hw);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
u32 value;
if (degrees == 0)
value = 0;
else if (degrees == 180)
- value = JH7100_CLK_INVERT;
+ value = JH71X0_CLK_INVERT;
else
return -EINVAL;
- jh7100_clk_reg_rmw(clk, JH7100_CLK_INVERT, value);
+ jh71x0_clk_reg_rmw(clk, JH71X0_CLK_INVERT, value);
return 0;
}
#ifdef CONFIG_DEBUG_FS
-static void jh7100_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
+static void jh71x0_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
- static const struct debugfs_reg32 jh7100_clk_reg = {
+ static const struct debugfs_reg32 jh71x0_clk_reg = {
.name = "CTRL",
.offset = 0,
};
- struct jh7100_clk *clk = jh7100_clk_from(hw);
- struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
+ struct jh71x0_clk *clk = jh71x0_clk_from(hw);
+ struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
struct debugfs_regset32 *regset;
regset = devm_kzalloc(priv->dev, sizeof(*regset), GFP_KERNEL);
if (!regset)
return;
- regset->regs = &jh7100_clk_reg;
+ regset->regs = &jh71x0_clk_reg;
regset->nregs = 1;
regset->base = priv->base + 4 * clk->idx;
debugfs_create_regset32("registers", 0400, dentry, regset);
}
#else
-#define jh7100_clk_debug_init NULL
+#define jh71x0_clk_debug_init NULL
#endif
-static const struct clk_ops jh7100_clk_gate_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_gate_ops = {
+ .enable = jh71x0_clk_enable,
+ .disable = jh71x0_clk_disable,
+ .is_enabled = jh71x0_clk_is_enabled,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_div_ops = {
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_div_ops = {
+ .recalc_rate = jh71x0_clk_recalc_rate,
+ .determine_rate = jh71x0_clk_determine_rate,
+ .set_rate = jh71x0_clk_set_rate,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_fdiv_ops = {
- .recalc_rate = jh7100_clk_frac_recalc_rate,
- .determine_rate = jh7100_clk_frac_determine_rate,
- .set_rate = jh7100_clk_frac_set_rate,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_fdiv_ops = {
+ .recalc_rate = jh71x0_clk_frac_recalc_rate,
+ .determine_rate = jh71x0_clk_frac_determine_rate,
+ .set_rate = jh71x0_clk_frac_set_rate,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_gdiv_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_gdiv_ops = {
+ .enable = jh71x0_clk_enable,
+ .disable = jh71x0_clk_disable,
+ .is_enabled = jh71x0_clk_is_enabled,
+ .recalc_rate = jh71x0_clk_recalc_rate,
+ .determine_rate = jh71x0_clk_determine_rate,
+ .set_rate = jh71x0_clk_set_rate,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_mux_ops = {
- .determine_rate = jh7100_clk_mux_determine_rate,
- .set_parent = jh7100_clk_set_parent,
- .get_parent = jh7100_clk_get_parent,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_mux_ops = {
+ .determine_rate = jh71x0_clk_mux_determine_rate,
+ .set_parent = jh71x0_clk_set_parent,
+ .get_parent = jh71x0_clk_get_parent,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_gmux_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .determine_rate = jh7100_clk_mux_determine_rate,
- .set_parent = jh7100_clk_set_parent,
- .get_parent = jh7100_clk_get_parent,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_gmux_ops = {
+ .enable = jh71x0_clk_enable,
+ .disable = jh71x0_clk_disable,
+ .is_enabled = jh71x0_clk_is_enabled,
+ .determine_rate = jh71x0_clk_mux_determine_rate,
+ .set_parent = jh71x0_clk_set_parent,
+ .get_parent = jh71x0_clk_get_parent,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_mdiv_ops = {
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .get_parent = jh7100_clk_get_parent,
- .set_parent = jh7100_clk_set_parent,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_mdiv_ops = {
+ .recalc_rate = jh71x0_clk_recalc_rate,
+ .determine_rate = jh71x0_clk_determine_rate,
+ .get_parent = jh71x0_clk_get_parent,
+ .set_parent = jh71x0_clk_set_parent,
+ .set_rate = jh71x0_clk_set_rate,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_gmd_ops = {
- .enable = jh7100_clk_enable,
- .disable = jh7100_clk_disable,
- .is_enabled = jh7100_clk_is_enabled,
- .recalc_rate = jh7100_clk_recalc_rate,
- .determine_rate = jh7100_clk_determine_rate,
- .get_parent = jh7100_clk_get_parent,
- .set_parent = jh7100_clk_set_parent,
- .set_rate = jh7100_clk_set_rate,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_gmd_ops = {
+ .enable = jh71x0_clk_enable,
+ .disable = jh71x0_clk_disable,
+ .is_enabled = jh71x0_clk_is_enabled,
+ .recalc_rate = jh71x0_clk_recalc_rate,
+ .determine_rate = jh71x0_clk_determine_rate,
+ .get_parent = jh71x0_clk_get_parent,
+ .set_parent = jh71x0_clk_set_parent,
+ .set_rate = jh71x0_clk_set_rate,
+ .debug_init = jh71x0_clk_debug_init,
};
-static const struct clk_ops jh7100_clk_inv_ops = {
- .get_phase = jh7100_clk_get_phase,
- .set_phase = jh7100_clk_set_phase,
- .debug_init = jh7100_clk_debug_init,
+static const struct clk_ops jh71x0_clk_inv_ops = {
+ .get_phase = jh71x0_clk_get_phase,
+ .set_phase = jh71x0_clk_set_phase,
+ .debug_init = jh71x0_clk_debug_init,
};
-const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
+const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
{
- if (max & JH7100_CLK_DIV_MASK) {
- if (max & JH7100_CLK_MUX_MASK) {
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gmd_ops;
- return &jh7100_clk_mdiv_ops;
+ if (max & JH71X0_CLK_DIV_MASK) {
+ if (max & JH71X0_CLK_MUX_MASK) {
+ if (max & JH71X0_CLK_ENABLE)
+ return &jh71x0_clk_gmd_ops;
+ return &jh71x0_clk_mdiv_ops;
}
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gdiv_ops;
- if (max == JH7100_CLK_FRAC_MAX)
- return &jh7100_clk_fdiv_ops;
- return &jh7100_clk_div_ops;
+ if (max & JH71X0_CLK_ENABLE)
+ return &jh71x0_clk_gdiv_ops;
+ if (max == JH71X0_CLK_FRAC_MAX)
+ return &jh71x0_clk_fdiv_ops;
+ return &jh71x0_clk_div_ops;
}
- if (max & JH7100_CLK_MUX_MASK) {
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gmux_ops;
- return &jh7100_clk_mux_ops;
+ if (max & JH71X0_CLK_MUX_MASK) {
+ if (max & JH71X0_CLK_ENABLE)
+ return &jh71x0_clk_gmux_ops;
+ return &jh71x0_clk_mux_ops;
}
- if (max & JH7100_CLK_ENABLE)
- return &jh7100_clk_gate_ops;
+ if (max & JH71X0_CLK_ENABLE)
+ return &jh71x0_clk_gate_ops;
- return &jh7100_clk_inv_ops;
+ return &jh71x0_clk_inv_ops;
}
-EXPORT_SYMBOL_GPL(starfive_jh7100_clk_ops);
+EXPORT_SYMBOL_GPL(starfive_jh71x0_clk_ops);
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index a8ba6e25b5ce..baf4b5cb4b8a 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CLK_STARFIVE_JH7100_H
-#define __CLK_STARFIVE_JH7100_H
+#ifndef __CLK_STARFIVE_JH71X0_H
+#define __CLK_STARFIVE_JH71X0_H
#include <linux/bits.h>
#include <linux/clk-provider.h>
@@ -8,107 +8,107 @@
#include <linux/spinlock.h>
/* register fields */
-#define JH7100_CLK_ENABLE BIT(31)
-#define JH7100_CLK_INVERT BIT(30)
-#define JH7100_CLK_MUX_MASK GENMASK(27, 24)
-#define JH7100_CLK_MUX_SHIFT 24
-#define JH7100_CLK_DIV_MASK GENMASK(23, 0)
-#define JH7100_CLK_FRAC_MASK GENMASK(15, 8)
-#define JH7100_CLK_FRAC_SHIFT 8
-#define JH7100_CLK_INT_MASK GENMASK(7, 0)
+#define JH71X0_CLK_ENABLE BIT(31)
+#define JH71X0_CLK_INVERT BIT(30)
+#define JH71X0_CLK_MUX_MASK GENMASK(27, 24)
+#define JH71X0_CLK_MUX_SHIFT 24
+#define JH71X0_CLK_DIV_MASK GENMASK(23, 0)
+#define JH71X0_CLK_FRAC_MASK GENMASK(15, 8)
+#define JH71X0_CLK_FRAC_SHIFT 8
+#define JH71X0_CLK_INT_MASK GENMASK(7, 0)
/* fractional divider min/max */
-#define JH7100_CLK_FRAC_MIN 100UL
-#define JH7100_CLK_FRAC_MAX 25599UL
+#define JH71X0_CLK_FRAC_MIN 100UL
+#define JH71X0_CLK_FRAC_MAX 25599UL
/* clock data */
-struct jh7100_clk_data {
+struct jh71x0_clk_data {
const char *name;
unsigned long flags;
u32 max;
u8 parents[4];
};
-#define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = { \
+#define JH71X0_GATE(_idx, _name, _flags, _parent) [_idx] = { \
.name = _name, \
.flags = CLK_SET_RATE_PARENT | (_flags), \
- .max = JH7100_CLK_ENABLE, \
+ .max = JH71X0_CLK_ENABLE, \
.parents = { [0] = _parent }, \
}
-#define JH7100__DIV(_idx, _name, _max, _parent) [_idx] = { \
+#define JH71X0__DIV(_idx, _name, _max, _parent) [_idx] = { \
.name = _name, \
.flags = 0, \
.max = _max, \
.parents = { [0] = _parent }, \
}
-#define JH7100_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
+#define JH71X0_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
.name = _name, \
.flags = _flags, \
- .max = JH7100_CLK_ENABLE | (_max), \
+ .max = JH71X0_CLK_ENABLE | (_max), \
.parents = { [0] = _parent }, \
}
-#define JH7100_FDIV(_idx, _name, _parent) [_idx] = { \
+#define JH71X0_FDIV(_idx, _name, _parent) [_idx] = { \
.name = _name, \
.flags = 0, \
- .max = JH7100_CLK_FRAC_MAX, \
+ .max = JH71X0_CLK_FRAC_MAX, \
.parents = { [0] = _parent }, \
}
-#define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = { \
+#define JH71X0__MUX(_idx, _name, _nparents, ...) [_idx] = { \
.name = _name, \
.flags = 0, \
- .max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT, \
+ .max = ((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT, \
.parents = { __VA_ARGS__ }, \
}
-#define JH7100_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
+#define JH71X0_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
.name = _name, \
.flags = _flags, \
- .max = JH7100_CLK_ENABLE | \
- (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT), \
+ .max = JH71X0_CLK_ENABLE | \
+ (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT), \
.parents = { __VA_ARGS__ }, \
}
-#define JH7100_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
+#define JH71X0_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
.name = _name, \
.flags = 0, \
- .max = (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
+ .max = (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
.parents = { __VA_ARGS__ }, \
}
-#define JH7100__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
+#define JH71X0__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
.name = _name, \
.flags = _flags, \
- .max = JH7100_CLK_ENABLE | \
- (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
+ .max = JH71X0_CLK_ENABLE | \
+ (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
.parents = { __VA_ARGS__ }, \
}
-#define JH7100__INV(_idx, _name, _parent) [_idx] = { \
+#define JH71X0__INV(_idx, _name, _parent) [_idx] = { \
.name = _name, \
.flags = CLK_SET_RATE_PARENT, \
- .max = JH7100_CLK_INVERT, \
+ .max = JH71X0_CLK_INVERT, \
.parents = { [0] = _parent }, \
}
-struct jh7100_clk {
+struct jh71x0_clk {
struct clk_hw hw;
unsigned int idx;
unsigned int max_div;
};
-struct jh7100_clk_priv {
+struct jh71x0_clk_priv {
/* protect clk enable and set rate/parent from happening at the same time */
spinlock_t rmw_lock;
struct device *dev;
void __iomem *base;
struct clk_hw *pll[3];
- struct jh7100_clk reg[];
+ struct jh71x0_clk reg[];
};
-const struct clk_ops *starfive_jh7100_clk_ops(u32 max);
+const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
#endif
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (3 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 12:56 ` Conor Dooley
` (2 more replies)
2023-03-11 9:07 ` [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers Hal Feng
` (15 subsequent siblings)
20 siblings, 3 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
Using ARCH_FOO symbol is preferred than SOC_FOO.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/reset/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 2a52c990d4fe..6ae5aa46a6b2 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -234,8 +234,8 @@ config RESET_SOCFPGA
config RESET_STARFIVE_JH7100
bool "StarFive JH7100 Reset Driver"
- depends on SOC_STARFIVE || COMPILE_TEST
- default SOC_STARFIVE
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (4 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-14 14:34 ` Philipp Zabel
2023-03-11 9:07 ` [PATCH v5 07/21] reset: starfive: Factor out common JH71X0 reset code Hal Feng
` (14 subsequent siblings)
20 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
MAINTAINERS | 2 +-
drivers/reset/Kconfig | 8 +-------
drivers/reset/Makefile | 2 +-
drivers/reset/starfive/Kconfig | 8 ++++++++
drivers/reset/starfive/Makefile | 2 ++
drivers/reset/{ => starfive}/reset-starfive-jh7100.c | 0
6 files changed, 13 insertions(+), 9 deletions(-)
create mode 100644 drivers/reset/starfive/Kconfig
create mode 100644 drivers/reset/starfive/Makefile
rename drivers/reset/{ => starfive}/reset-starfive-jh7100.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index caba3b61ad5c..87f210e357ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19940,7 +19940,7 @@ STARFIVE JH7100 RESET CONTROLLER DRIVER
M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained
F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
-F: drivers/reset/reset-starfive-jh7100.c
+F: drivers/reset/starfive/reset-starfive-jh7100.c
F: include/dt-bindings/reset/starfive-jh7100.h
STARFIVE JH71XX PMU CONTROLLER DRIVER
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 6ae5aa46a6b2..6aa8f243b30c 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -232,13 +232,6 @@ config RESET_SOCFPGA
This enables the reset driver for the SoCFPGA ARMv7 platforms. This
driver gets initialized early during platform init calls.
-config RESET_STARFIVE_JH7100
- bool "StarFive JH7100 Reset Driver"
- depends on ARCH_STARFIVE || COMPILE_TEST
- default ARCH_STARFIVE
- help
- This enables the reset controller driver for the StarFive JH7100 SoC.
-
config RESET_SUNPLUS
bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
default ARCH_SUNPLUS
@@ -320,6 +313,7 @@ config RESET_ZYNQ
help
This enables the reset controller driver for Xilinx Zynq SoCs.
+source "drivers/reset/starfive/Kconfig"
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
source "drivers/reset/tegra/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 3e7e5fd633a8..719b8f6f84bc 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += core.o
obj-y += hisilicon/
+obj-$(CONFIG_ARCH_STARFIVE) += starfive/
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
@@ -30,7 +31,6 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
new file mode 100644
index 000000000000..abbf0c52d03e
--- /dev/null
+++ b/drivers/reset/starfive/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config RESET_STARFIVE_JH7100
+ bool "StarFive JH7100 Reset Driver"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
+ help
+ This enables the reset controller driver for the StarFive JH7100 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
new file mode 100644
index 000000000000..670d049423f5
--- /dev/null
+++ b/drivers/reset/starfive/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
diff --git a/drivers/reset/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
similarity index 100%
rename from drivers/reset/reset-starfive-jh7100.c
rename to drivers/reset/starfive/reset-starfive-jh7100.c
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 07/21] reset: starfive: Factor out common JH71X0 reset code
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (5 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 08/21] reset: starfive: Extract the " Hal Feng
` (13 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
The StarFive JH7100 SoC has additional reset controllers for audio and
video, but the registers follow the same structure. On the JH7110 the
reset registers don't get their own memory range, but instead follow the
clock control registers. The registers still follow the same structure
though, so let's factor out the common code to handle all these cases.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
MAINTAINERS | 4 +-
drivers/reset/starfive/Kconfig | 4 +
drivers/reset/starfive/Makefile | 2 +
.../reset/starfive/reset-starfive-jh7100.c | 150 +---------------
.../reset/starfive/reset-starfive-jh71x0.c | 162 ++++++++++++++++++
.../reset/starfive/reset-starfive-jh71x0.h | 11 ++
6 files changed, 182 insertions(+), 151 deletions(-)
create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.c
create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 87f210e357ca..0fb7158835b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19936,11 +19936,11 @@ F: drivers/pinctrl/starfive/pinctrl-starfive-jh71*
F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
F: include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
-STARFIVE JH7100 RESET CONTROLLER DRIVER
+STARFIVE JH71X0 RESET CONTROLLER DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained
F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
-F: drivers/reset/starfive/reset-starfive-jh7100.c
+F: drivers/reset/starfive/reset-starfive-jh71*
F: include/dt-bindings/reset/starfive-jh7100.h
STARFIVE JH71XX PMU CONTROLLER DRIVER
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index abbf0c52d03e..1927a5a3b53a 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -1,8 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
+config RESET_STARFIVE_JH71X0
+ bool
+
config RESET_STARFIVE_JH7100
bool "StarFive JH7100 Reset Driver"
depends on ARCH_STARFIVE || COMPILE_TEST
+ select RESET_STARFIVE_JH71X0
default ARCH_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index 670d049423f5..f6aa12466fad 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
+
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
index fc44b2fb3e03..5a68327c1f6a 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
@@ -5,158 +5,10 @@
* Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
*/
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <linux/io-64-nonatomic-lo-hi.h>
-#include <linux/iopoll.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/spinlock.h>
-#include <dt-bindings/reset/starfive-jh7100.h>
-
-/* register offsets */
-#define JH7100_RESET_ASSERT0 0x00
-#define JH7100_RESET_ASSERT1 0x04
-#define JH7100_RESET_ASSERT2 0x08
-#define JH7100_RESET_ASSERT3 0x0c
-#define JH7100_RESET_STATUS0 0x10
-#define JH7100_RESET_STATUS1 0x14
-#define JH7100_RESET_STATUS2 0x18
-#define JH7100_RESET_STATUS3 0x1c
-
-/*
- * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
- * line 32m + n, and writing a 0 deasserts the same line.
- * Most reset lines have their status inverted so a 0 bit in the STATUS
- * register means the line is asserted and a 1 means it's deasserted. A few
- * lines don't though, so store the expected value of the status registers when
- * all lines are asserted.
- */
-static const u64 jh7100_reset_asserted[2] = {
- /* STATUS0 */
- BIT_ULL_MASK(JH7100_RST_U74) |
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
- /* STATUS1 */
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
- /* STATUS2 */
- BIT_ULL_MASK(JH7100_RST_E24) |
- /* STATUS3 */
- 0,
-};
-
-struct jh7100_reset {
- struct reset_controller_dev rcdev;
- /* protect registers against concurrent read-modify-write */
- spinlock_t lock;
- void __iomem *base;
-};
-
-static inline struct jh7100_reset *
-jh7100_reset_from(struct reset_controller_dev *rcdev)
-{
- return container_of(rcdev, struct jh7100_reset, rcdev);
-}
-
-static int jh7100_reset_update(struct reset_controller_dev *rcdev,
- unsigned long id, bool assert)
-{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 done = jh7100_reset_asserted[offset] & mask;
- u64 value;
- unsigned long flags;
- int ret;
-
- if (!assert)
- done ^= mask;
-
- spin_lock_irqsave(&data->lock, flags);
-
- value = readq(reg_assert);
- if (assert)
- value |= mask;
- else
- value &= ~mask;
- writeq(value, reg_assert);
-
- /* if the associated clock is gated, deasserting might otherwise hang forever */
- ret = readq_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
-
- spin_unlock_irqrestore(&data->lock, flags);
- return ret;
-}
-
-static int jh7100_reset_assert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- return jh7100_reset_update(rcdev, id, true);
-}
-
-static int jh7100_reset_deassert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- return jh7100_reset_update(rcdev, id, false);
-}
-
-static int jh7100_reset_reset(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- int ret;
-
- ret = jh7100_reset_assert(rcdev, id);
- if (ret)
- return ret;
-
- return jh7100_reset_deassert(rcdev, id);
-}
-
-static int jh7100_reset_status(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 value = readq(reg_status);
-
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
-}
-
-static const struct reset_control_ops jh7100_reset_ops = {
- .assert = jh7100_reset_assert,
- .deassert = jh7100_reset_deassert,
- .reset = jh7100_reset_reset,
- .status = jh7100_reset_status,
-};
-
-static int __init jh7100_reset_probe(struct platform_device *pdev)
-{
- struct jh7100_reset *data;
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
-
- data->rcdev.ops = &jh7100_reset_ops;
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = JH7100_RSTN_END;
- data->rcdev.dev = &pdev->dev;
- data->rcdev.of_node = pdev->dev.of_node;
- spin_lock_init(&data->lock);
-
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
+#include "reset-starfive-jh71x0.h"
static const struct of_device_id jh7100_reset_dt_ids[] = {
{ .compatible = "starfive,jh7100-reset" },
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
new file mode 100644
index 000000000000..114a13c4b8a6
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JH7100 SoC
+ *
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/* register offsets */
+#define JH7100_RESET_ASSERT0 0x00
+#define JH7100_RESET_ASSERT1 0x04
+#define JH7100_RESET_ASSERT2 0x08
+#define JH7100_RESET_ASSERT3 0x0c
+#define JH7100_RESET_STATUS0 0x10
+#define JH7100_RESET_STATUS1 0x14
+#define JH7100_RESET_STATUS2 0x18
+#define JH7100_RESET_STATUS3 0x1c
+
+/*
+ * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
+ * line 32m + n, and writing a 0 deasserts the same line.
+ * Most reset lines have their status inverted so a 0 bit in the STATUS
+ * register means the line is asserted and a 1 means it's deasserted. A few
+ * lines don't though, so store the expected value of the status registers when
+ * all lines are asserted.
+ */
+static const u64 jh7100_reset_asserted[2] = {
+ /* STATUS0 */
+ BIT_ULL_MASK(JH7100_RST_U74) |
+ BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
+ /* STATUS1 */
+ BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
+ /* STATUS2 */
+ BIT_ULL_MASK(JH7100_RST_E24) |
+ /* STATUS3 */
+ 0,
+};
+
+struct jh7100_reset {
+ struct reset_controller_dev rcdev;
+ /* protect registers against concurrent read-modify-write */
+ spinlock_t lock;
+ void __iomem *base;
+};
+
+static inline struct jh7100_reset *
+jh7100_reset_from(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct jh7100_reset, rcdev);
+}
+
+static int jh7100_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct jh7100_reset *data = jh7100_reset_from(rcdev);
+ unsigned long offset = BIT_ULL_WORD(id);
+ u64 mask = BIT_ULL_MASK(id);
+ void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
+ void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
+ u64 done = jh7100_reset_asserted[offset] & mask;
+ u64 value;
+ unsigned long flags;
+ int ret;
+
+ if (!assert)
+ done ^= mask;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ value = readq(reg_assert);
+ if (assert)
+ value |= mask;
+ else
+ value &= ~mask;
+ writeq(value, reg_assert);
+
+ /* if the associated clock is gated, deasserting might otherwise hang forever */
+ ret = readq_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
+
+ spin_unlock_irqrestore(&data->lock, flags);
+ return ret;
+}
+
+static int jh7100_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return jh7100_reset_update(rcdev, id, true);
+}
+
+static int jh7100_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return jh7100_reset_update(rcdev, id, false);
+}
+
+static int jh7100_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = jh7100_reset_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ return jh7100_reset_deassert(rcdev, id);
+}
+
+static int jh7100_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct jh7100_reset *data = jh7100_reset_from(rcdev);
+ unsigned long offset = BIT_ULL_WORD(id);
+ u64 mask = BIT_ULL_MASK(id);
+ void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
+ u64 value = readq(reg_status);
+
+ return !((value ^ jh7100_reset_asserted[offset]) & mask);
+}
+
+static const struct reset_control_ops jh7100_reset_ops = {
+ .assert = jh7100_reset_assert,
+ .deassert = jh7100_reset_deassert,
+ .reset = jh7100_reset_reset,
+ .status = jh7100_reset_status,
+};
+
+int jh7100_reset_probe(struct platform_device *pdev)
+{
+ struct jh7100_reset *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+
+ data->rcdev.ops = &jh7100_reset_ops;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = JH7100_RSTN_END;
+ data->rcdev.dev = &pdev->dev;
+ data->rcdev.of_node = pdev->dev.of_node;
+ spin_lock_init(&data->lock);
+
+ return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+EXPORT_SYMBOL_GPL(jh7100_reset_probe);
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
new file mode 100644
index 000000000000..318d7a0e096a
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __RESET_STARFIVE_JH71X0_H
+#define __RESET_STARFIVE_JH71X0_H
+
+int jh7100_reset_probe(struct platform_device *pdev);
+
+#endif /* __RESET_STARFIVE_JH71X0_H */
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 08/21] reset: starfive: Extract the common JH71X0 reset code
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (6 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 07/21] reset: starfive: Factor out common JH71X0 reset code Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 09/21] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
` (12 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Extract the common JH71X0 reset code for reusing them to
support JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../reset/starfive/reset-starfive-jh7100.c | 49 ++++++++++++
.../reset/starfive/reset-starfive-jh71x0.c | 76 ++++++-------------
.../reset/starfive/reset-starfive-jh71x0.h | 5 +-
3 files changed, 76 insertions(+), 54 deletions(-)
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
index 5a68327c1f6a..9d7cb4ed8869 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
@@ -10,6 +10,55 @@
#include "reset-starfive-jh71x0.h"
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/* register offsets */
+#define JH7100_RESET_ASSERT0 0x00
+#define JH7100_RESET_ASSERT1 0x04
+#define JH7100_RESET_ASSERT2 0x08
+#define JH7100_RESET_ASSERT3 0x0c
+#define JH7100_RESET_STATUS0 0x10
+#define JH7100_RESET_STATUS1 0x14
+#define JH7100_RESET_STATUS2 0x18
+#define JH7100_RESET_STATUS3 0x1c
+
+/*
+ * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
+ * line 32m + n, and writing a 0 deasserts the same line.
+ * Most reset lines have their status inverted so a 0 bit in the STATUS
+ * register means the line is asserted and a 1 means it's deasserted. A few
+ * lines don't though, so store the expected value of the status registers when
+ * all lines are asserted.
+ */
+static const u64 jh7100_reset_asserted[2] = {
+ /* STATUS0 */
+ BIT_ULL_MASK(JH7100_RST_U74) |
+ BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
+ /* STATUS1 */
+ BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
+ /* STATUS2 */
+ BIT_ULL_MASK(JH7100_RST_E24) |
+ /* STATUS3 */
+ 0,
+};
+
+static int __init jh7100_reset_probe(struct platform_device *pdev)
+{
+ void __iomem *base = devm_platform_ioremap_resource(pdev, 0);
+
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ return reset_starfive_jh7100_register(&pdev->dev, pdev->dev.of_node,
+ base + JH7100_RESET_ASSERT0,
+ base + JH7100_RESET_STATUS0,
+ jh7100_reset_asserted,
+ JH7100_RSTN_END,
+ THIS_MODULE);
+}
+
static const struct of_device_id jh7100_reset_dt_ids[] = {
{ .compatible = "starfive,jh7100-reset" },
{ /* sentinel */ }
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
index 114a13c4b8a6..3577444a89c6 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.c
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -10,51 +10,18 @@
#include <linux/io.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/iopoll.h>
-#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/spinlock.h>
#include "reset-starfive-jh71x0.h"
-#include <dt-bindings/reset/starfive-jh7100.h>
-
-/* register offsets */
-#define JH7100_RESET_ASSERT0 0x00
-#define JH7100_RESET_ASSERT1 0x04
-#define JH7100_RESET_ASSERT2 0x08
-#define JH7100_RESET_ASSERT3 0x0c
-#define JH7100_RESET_STATUS0 0x10
-#define JH7100_RESET_STATUS1 0x14
-#define JH7100_RESET_STATUS2 0x18
-#define JH7100_RESET_STATUS3 0x1c
-
-/*
- * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
- * line 32m + n, and writing a 0 deasserts the same line.
- * Most reset lines have their status inverted so a 0 bit in the STATUS
- * register means the line is asserted and a 1 means it's deasserted. A few
- * lines don't though, so store the expected value of the status registers when
- * all lines are asserted.
- */
-static const u64 jh7100_reset_asserted[2] = {
- /* STATUS0 */
- BIT_ULL_MASK(JH7100_RST_U74) |
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
- /* STATUS1 */
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
- /* STATUS2 */
- BIT_ULL_MASK(JH7100_RST_E24) |
- /* STATUS3 */
- 0,
-};
-
struct jh7100_reset {
struct reset_controller_dev rcdev;
/* protect registers against concurrent read-modify-write */
spinlock_t lock;
- void __iomem *base;
+ void __iomem *assert;
+ void __iomem *status;
+ const u64 *asserted;
};
static inline struct jh7100_reset *
@@ -69,9 +36,9 @@ static int jh7100_reset_update(struct reset_controller_dev *rcdev,
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 done = jh7100_reset_asserted[offset] & mask;
+ void __iomem *reg_assert = data->assert + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
+ u64 done = data->asserted ? data->asserted[offset] & mask : 0;
u64 value;
unsigned long flags;
int ret;
@@ -125,10 +92,10 @@ static int jh7100_reset_status(struct reset_controller_dev *rcdev,
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
u64 value = readq(reg_status);
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
+ return !((value ^ data->asserted[offset]) & mask);
}
static const struct reset_control_ops jh7100_reset_ops = {
@@ -138,25 +105,28 @@ static const struct reset_control_ops jh7100_reset_ops = {
.status = jh7100_reset_status,
};
-int jh7100_reset_probe(struct platform_device *pdev)
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+ void __iomem *assert, void __iomem *status,
+ const u64 *asserted, unsigned int nr_resets,
+ struct module *owner)
{
struct jh7100_reset *data;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
-
data->rcdev.ops = &jh7100_reset_ops;
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = JH7100_RSTN_END;
- data->rcdev.dev = &pdev->dev;
- data->rcdev.of_node = pdev->dev.of_node;
+ data->rcdev.owner = owner;
+ data->rcdev.nr_resets = nr_resets;
+ data->rcdev.dev = dev;
+ data->rcdev.of_node = of_node;
+
spin_lock_init(&data->lock);
+ data->assert = assert;
+ data->status = status;
+ data->asserted = asserted;
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+ return devm_reset_controller_register(dev, &data->rcdev);
}
-EXPORT_SYMBOL_GPL(jh7100_reset_probe);
+EXPORT_SYMBOL_GPL(reset_starfive_jh7100_register);
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index 318d7a0e096a..1fc5a648c8d8 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,6 +6,9 @@
#ifndef __RESET_STARFIVE_JH71X0_H
#define __RESET_STARFIVE_JH71X0_H
-int jh7100_reset_probe(struct platform_device *pdev);
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+ void __iomem *assert, void __iomem *status,
+ const u64 *asserted, unsigned int nr_resets,
+ struct module *owner);
#endif /* __RESET_STARFIVE_JH71X0_H */
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 09/21] reset: starfive: Rename "jh7100" to "jh71x0" for the common code
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (7 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 08/21] reset: starfive: Extract the " Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 10/21] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
` (11 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
For the common code will be shared with the StarFive JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../reset/starfive/reset-starfive-jh7100.c | 2 +-
.../reset/starfive/reset-starfive-jh71x0.c | 50 +++++++++----------
.../reset/starfive/reset-starfive-jh71x0.h | 2 +-
3 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
index 9d7cb4ed8869..5f06e5ae3346 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
@@ -51,7 +51,7 @@ static int __init jh7100_reset_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
- return reset_starfive_jh7100_register(&pdev->dev, pdev->dev.of_node,
+ return reset_starfive_jh71x0_register(&pdev->dev, pdev->dev.of_node,
base + JH7100_RESET_ASSERT0,
base + JH7100_RESET_STATUS0,
jh7100_reset_asserted,
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
index 3577444a89c6..a689f4730ed7 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.c
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Reset driver for the StarFive JH7100 SoC
+ * Reset driver for the StarFive JH71X0 SoCs
*
* Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
*/
@@ -15,7 +15,7 @@
#include "reset-starfive-jh71x0.h"
-struct jh7100_reset {
+struct jh71x0_reset {
struct reset_controller_dev rcdev;
/* protect registers against concurrent read-modify-write */
spinlock_t lock;
@@ -24,16 +24,16 @@ struct jh7100_reset {
const u64 *asserted;
};
-static inline struct jh7100_reset *
-jh7100_reset_from(struct reset_controller_dev *rcdev)
+static inline struct jh71x0_reset *
+jh71x0_reset_from(struct reset_controller_dev *rcdev)
{
- return container_of(rcdev, struct jh7100_reset, rcdev);
+ return container_of(rcdev, struct jh71x0_reset, rcdev);
}
-static int jh7100_reset_update(struct reset_controller_dev *rcdev,
+static int jh71x0_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
+ struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
void __iomem *reg_assert = data->assert + offset * sizeof(u64);
@@ -62,34 +62,34 @@ static int jh7100_reset_update(struct reset_controller_dev *rcdev,
return ret;
}
-static int jh7100_reset_assert(struct reset_controller_dev *rcdev,
+static int jh71x0_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return jh7100_reset_update(rcdev, id, true);
+ return jh71x0_reset_update(rcdev, id, true);
}
-static int jh7100_reset_deassert(struct reset_controller_dev *rcdev,
+static int jh71x0_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return jh7100_reset_update(rcdev, id, false);
+ return jh71x0_reset_update(rcdev, id, false);
}
-static int jh7100_reset_reset(struct reset_controller_dev *rcdev,
+static int jh71x0_reset_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
int ret;
- ret = jh7100_reset_assert(rcdev, id);
+ ret = jh71x0_reset_assert(rcdev, id);
if (ret)
return ret;
- return jh7100_reset_deassert(rcdev, id);
+ return jh71x0_reset_deassert(rcdev, id);
}
-static int jh7100_reset_status(struct reset_controller_dev *rcdev,
+static int jh71x0_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
+ struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
void __iomem *reg_status = data->status + offset * sizeof(u64);
@@ -98,25 +98,25 @@ static int jh7100_reset_status(struct reset_controller_dev *rcdev,
return !((value ^ data->asserted[offset]) & mask);
}
-static const struct reset_control_ops jh7100_reset_ops = {
- .assert = jh7100_reset_assert,
- .deassert = jh7100_reset_deassert,
- .reset = jh7100_reset_reset,
- .status = jh7100_reset_status,
+static const struct reset_control_ops jh71x0_reset_ops = {
+ .assert = jh71x0_reset_assert,
+ .deassert = jh71x0_reset_deassert,
+ .reset = jh71x0_reset_reset,
+ .status = jh71x0_reset_status,
};
-int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
const u64 *asserted, unsigned int nr_resets,
struct module *owner)
{
- struct jh7100_reset *data;
+ struct jh71x0_reset *data;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->rcdev.ops = &jh7100_reset_ops;
+ data->rcdev.ops = &jh71x0_reset_ops;
data->rcdev.owner = owner;
data->rcdev.nr_resets = nr_resets;
data->rcdev.dev = dev;
@@ -129,4 +129,4 @@ int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_no
return devm_reset_controller_register(dev, &data->rcdev);
}
-EXPORT_SYMBOL_GPL(reset_starfive_jh7100_register);
+EXPORT_SYMBOL_GPL(reset_starfive_jh71x0_register);
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index 1fc5a648c8d8..ac9e80dd3f59 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,7 +6,7 @@
#ifndef __RESET_STARFIVE_JH71X0_H
#define __RESET_STARFIVE_JH71X0_H
-int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
const u64 *asserted, unsigned int nr_resets,
struct module *owner);
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 10/21] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (8 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 09/21] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
` (10 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
We currently use 64bit I/O on the 32bit registers. This works because
there are an even number of assert and status registers, so they're only
ever accessed in pairs on 64bit boundaries.
There are however other reset controllers for audio and video on the
JH7100 SoC with only one status register that isn't 64bit aligned so
64bit I/O results in an unaligned access exception.
Switch to 32bit I/O in preparation for supporting these resets too.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../reset/starfive/reset-starfive-jh7100.c | 14 ++++-----
.../reset/starfive/reset-starfive-jh71x0.c | 31 +++++++++----------
.../reset/starfive/reset-starfive-jh71x0.h | 2 +-
3 files changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
index 5f06e5ae3346..2a56f7fd4ba7 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
@@ -30,16 +30,16 @@
* lines don't though, so store the expected value of the status registers when
* all lines are asserted.
*/
-static const u64 jh7100_reset_asserted[2] = {
+static const u32 jh7100_reset_asserted[4] = {
/* STATUS0 */
- BIT_ULL_MASK(JH7100_RST_U74) |
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
+ BIT(JH7100_RST_U74 % 32) |
+ BIT(JH7100_RST_VP6_DRESET % 32) |
+ BIT(JH7100_RST_VP6_BRESET % 32),
/* STATUS1 */
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
+ BIT(JH7100_RST_HIFI4_DRESET % 32) |
+ BIT(JH7100_RST_HIFI4_BRESET % 32),
/* STATUS2 */
- BIT_ULL_MASK(JH7100_RST_E24) |
+ BIT(JH7100_RST_E24 % 32),
/* STATUS3 */
0,
};
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
index a689f4730ed7..55bbbd2de52c 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.c
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -8,7 +8,6 @@
#include <linux/bitmap.h>
#include <linux/device.h>
#include <linux/io.h>
-#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/iopoll.h>
#include <linux/reset-controller.h>
#include <linux/spinlock.h>
@@ -21,7 +20,7 @@ struct jh71x0_reset {
spinlock_t lock;
void __iomem *assert;
void __iomem *status;
- const u64 *asserted;
+ const u32 *asserted;
};
static inline struct jh71x0_reset *
@@ -34,12 +33,12 @@ static int jh71x0_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->assert + offset * sizeof(u64);
- void __iomem *reg_status = data->status + offset * sizeof(u64);
- u64 done = data->asserted ? data->asserted[offset] & mask : 0;
- u64 value;
+ unsigned long offset = id / 32;
+ u32 mask = BIT(id % 32);
+ void __iomem *reg_assert = data->assert + offset * sizeof(u32);
+ void __iomem *reg_status = data->status + offset * sizeof(u32);
+ u32 done = data->asserted ? data->asserted[offset] & mask : 0;
+ u32 value;
unsigned long flags;
int ret;
@@ -48,15 +47,15 @@ static int jh71x0_reset_update(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
- value = readq(reg_assert);
+ value = readl(reg_assert);
if (assert)
value |= mask;
else
value &= ~mask;
- writeq(value, reg_assert);
+ writel(value, reg_assert);
/* if the associated clock is gated, deasserting might otherwise hang forever */
- ret = readq_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
+ ret = readl_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
spin_unlock_irqrestore(&data->lock, flags);
return ret;
@@ -90,10 +89,10 @@ static int jh71x0_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->status + offset * sizeof(u64);
- u64 value = readq(reg_status);
+ unsigned long offset = id / 32;
+ u32 mask = BIT(id % 32);
+ void __iomem *reg_status = data->status + offset * sizeof(u32);
+ u32 value = readl(reg_status);
return !((value ^ data->asserted[offset]) & mask);
}
@@ -107,7 +106,7 @@ static const struct reset_control_ops jh71x0_reset_ops = {
int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
- const u64 *asserted, unsigned int nr_resets,
+ const u32 *asserted, unsigned int nr_resets,
struct module *owner)
{
struct jh71x0_reset *data;
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index ac9e80dd3f59..db7d39a87f87 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -8,7 +8,7 @@
int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
- const u64 *asserted, unsigned int nr_resets,
+ const u32 *asserted, unsigned int nr_resets,
struct module *owner);
#endif /* __RESET_STARFIVE_JH71X0_H */
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (9 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 10/21] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 13:11 ` Conor Dooley
2023-03-11 14:17 ` Rob Herring
2023-03-11 9:07 ` [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
` (9 subsequent siblings)
20 siblings, 2 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add bindings for the system clock and reset generator (SYSCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
MAINTAINERS | 8 +-
.../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
.../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
4 files changed, 454 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
new file mode 100644
index 000000000000..84373ae31644
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-syscrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System Clock and Reset Generator
+
+maintainers:
+ - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+ compatible:
+ const: starfive,jh7110-syscrg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ oneOf:
+ - items:
+ - description: Main Oscillator (24 MHz)
+ - description: GMAC1 RMII reference or GMAC1 RGMII RX
+ - description: External I2S TX bit clock
+ - description: External I2S TX left/right channel clock
+ - description: External I2S RX bit clock
+ - description: External I2S RX left/right channel clock
+ - description: External TDM clock
+ - description: External audio master clock
+
+ - items:
+ - description: Main Oscillator (24 MHz)
+ - description: GMAC1 RMII reference
+ - description: GMAC1 RGMII RX
+ - description: External I2S TX bit clock
+ - description: External I2S TX left/right channel clock
+ - description: External I2S RX bit clock
+ - description: External I2S RX left/right channel clock
+ - description: External TDM clock
+ - description: External audio master clock
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: osc
+ - enum:
+ - gmac1_rmii_refin
+ - gmac1_rgmii_rxin
+ - const: i2stx_bclk_ext
+ - const: i2stx_lrck_ext
+ - const: i2srx_bclk_ext
+ - const: i2srx_lrck_ext
+ - const: tdm_ext
+ - const: mclk_ext
+
+ - items:
+ - const: osc
+ - const: gmac1_rmii_refin
+ - const: gmac1_rgmii_rxin
+ - const: i2stx_bclk_ext
+ - const: i2stx_lrck_ext
+ - const: i2srx_bclk_ext
+ - const: i2srx_lrck_ext
+ - const: tdm_ext
+ - const: mclk_ext
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+ '#reset-cells':
+ const: 1
+ description:
+ See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@13020000 {
+ compatible = "starfive,jh7110-syscrg";
+ reg = <0x13020000 0x10000>;
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0fb7158835b0..958b7ec118b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19915,10 +19915,11 @@ F: arch/riscv/boot/dts/starfive/
STARFIVE JH71X0 CLOCK DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
+M: Hal Feng <hal.feng@starfivetech.com>
S: Maintained
-F: Documentation/devicetree/bindings/clock/starfive,jh7100-*.yaml
+F: Documentation/devicetree/bindings/clock/starfive,jh71*.yaml
F: drivers/clk/starfive/clk-starfive-jh71*
-F: include/dt-bindings/clock/starfive-jh7100*.h
+F: include/dt-bindings/clock/starfive?jh71*.h
STARFIVE JH7110 MMC/SD/SDIO DRIVER
M: William Qiu <william.qiu@starfivetech.com>
@@ -19938,10 +19939,11 @@ F: include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
STARFIVE JH71X0 RESET CONTROLLER DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
+M: Hal Feng <hal.feng@starfivetech.com>
S: Maintained
F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
F: drivers/reset/starfive/reset-starfive-jh71*
-F: include/dt-bindings/reset/starfive-jh7100.h
+F: include/dt-bindings/reset/starfive?jh71*.h
STARFIVE JH71XX PMU CONTROLLER DRIVER
M: Walker Chen <walker.chen@starfivetech.com>
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
new file mode 100644
index 000000000000..fdd1852e34cc
--- /dev/null
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
+#define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
+
+/* SYSCRG clocks */
+#define JH7110_SYSCLK_CPU_ROOT 0
+#define JH7110_SYSCLK_CPU_CORE 1
+#define JH7110_SYSCLK_CPU_BUS 2
+#define JH7110_SYSCLK_GPU_ROOT 3
+#define JH7110_SYSCLK_PERH_ROOT 4
+#define JH7110_SYSCLK_BUS_ROOT 5
+#define JH7110_SYSCLK_NOCSTG_BUS 6
+#define JH7110_SYSCLK_AXI_CFG0 7
+#define JH7110_SYSCLK_STG_AXIAHB 8
+#define JH7110_SYSCLK_AHB0 9
+#define JH7110_SYSCLK_AHB1 10
+#define JH7110_SYSCLK_APB_BUS 11
+#define JH7110_SYSCLK_APB0 12
+#define JH7110_SYSCLK_PLL0_DIV2 13
+#define JH7110_SYSCLK_PLL1_DIV2 14
+#define JH7110_SYSCLK_PLL2_DIV2 15
+#define JH7110_SYSCLK_AUDIO_ROOT 16
+#define JH7110_SYSCLK_MCLK_INNER 17
+#define JH7110_SYSCLK_MCLK 18
+#define JH7110_SYSCLK_MCLK_OUT 19
+#define JH7110_SYSCLK_ISP_2X 20
+#define JH7110_SYSCLK_ISP_AXI 21
+#define JH7110_SYSCLK_GCLK0 22
+#define JH7110_SYSCLK_GCLK1 23
+#define JH7110_SYSCLK_GCLK2 24
+#define JH7110_SYSCLK_CORE 25
+#define JH7110_SYSCLK_CORE1 26
+#define JH7110_SYSCLK_CORE2 27
+#define JH7110_SYSCLK_CORE3 28
+#define JH7110_SYSCLK_CORE4 29
+#define JH7110_SYSCLK_DEBUG 30
+#define JH7110_SYSCLK_RTC_TOGGLE 31
+#define JH7110_SYSCLK_TRACE0 32
+#define JH7110_SYSCLK_TRACE1 33
+#define JH7110_SYSCLK_TRACE2 34
+#define JH7110_SYSCLK_TRACE3 35
+#define JH7110_SYSCLK_TRACE4 36
+#define JH7110_SYSCLK_TRACE_COM 37
+#define JH7110_SYSCLK_NOC_BUS_CPU_AXI 38
+#define JH7110_SYSCLK_NOC_BUS_AXICFG0_AXI 39
+#define JH7110_SYSCLK_OSC_DIV2 40
+#define JH7110_SYSCLK_PLL1_DIV4 41
+#define JH7110_SYSCLK_PLL1_DIV8 42
+#define JH7110_SYSCLK_DDR_BUS 43
+#define JH7110_SYSCLK_DDR_AXI 44
+#define JH7110_SYSCLK_GPU_CORE 45
+#define JH7110_SYSCLK_GPU_CORE_CLK 46
+#define JH7110_SYSCLK_GPU_SYS_CLK 47
+#define JH7110_SYSCLK_GPU_APB 48
+#define JH7110_SYSCLK_GPU_RTC_TOGGLE 49
+#define JH7110_SYSCLK_NOC_BUS_GPU_AXI 50
+#define JH7110_SYSCLK_ISP_TOP_CORE 51
+#define JH7110_SYSCLK_ISP_TOP_AXI 52
+#define JH7110_SYSCLK_NOC_BUS_ISP_AXI 53
+#define JH7110_SYSCLK_HIFI4_CORE 54
+#define JH7110_SYSCLK_HIFI4_AXI 55
+#define JH7110_SYSCLK_AXI_CFG1_MAIN 56
+#define JH7110_SYSCLK_AXI_CFG1_AHB 57
+#define JH7110_SYSCLK_VOUT_SRC 58
+#define JH7110_SYSCLK_VOUT_AXI 59
+#define JH7110_SYSCLK_NOC_BUS_DISP_AXI 60
+#define JH7110_SYSCLK_VOUT_TOP_AHB 61
+#define JH7110_SYSCLK_VOUT_TOP_AXI 62
+#define JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK 63
+#define JH7110_SYSCLK_VOUT_TOP_MIPIPHY_REF 64
+#define JH7110_SYSCLK_JPEGC_AXI 65
+#define JH7110_SYSCLK_CODAJ12_AXI 66
+#define JH7110_SYSCLK_CODAJ12_CORE 67
+#define JH7110_SYSCLK_CODAJ12_APB 68
+#define JH7110_SYSCLK_VDEC_AXI 69
+#define JH7110_SYSCLK_WAVE511_AXI 70
+#define JH7110_SYSCLK_WAVE511_BPU 71
+#define JH7110_SYSCLK_WAVE511_VCE 72
+#define JH7110_SYSCLK_WAVE511_APB 73
+#define JH7110_SYSCLK_VDEC_JPG 74
+#define JH7110_SYSCLK_VDEC_MAIN 75
+#define JH7110_SYSCLK_NOC_BUS_VDEC_AXI 76
+#define JH7110_SYSCLK_VENC_AXI 77
+#define JH7110_SYSCLK_WAVE420L_AXI 78
+#define JH7110_SYSCLK_WAVE420L_BPU 79
+#define JH7110_SYSCLK_WAVE420L_VCE 80
+#define JH7110_SYSCLK_WAVE420L_APB 81
+#define JH7110_SYSCLK_NOC_BUS_VENC_AXI 82
+#define JH7110_SYSCLK_AXI_CFG0_MAIN_DIV 83
+#define JH7110_SYSCLK_AXI_CFG0_MAIN 84
+#define JH7110_SYSCLK_AXI_CFG0_HIFI4 85
+#define JH7110_SYSCLK_AXIMEM2_AXI 86
+#define JH7110_SYSCLK_QSPI_AHB 87
+#define JH7110_SYSCLK_QSPI_APB 88
+#define JH7110_SYSCLK_QSPI_REF_SRC 89
+#define JH7110_SYSCLK_QSPI_REF 90
+#define JH7110_SYSCLK_SDIO0_AHB 91
+#define JH7110_SYSCLK_SDIO1_AHB 92
+#define JH7110_SYSCLK_SDIO0_SDCARD 93
+#define JH7110_SYSCLK_SDIO1_SDCARD 94
+#define JH7110_SYSCLK_USB_125M 95
+#define JH7110_SYSCLK_NOC_BUS_STG_AXI 96
+#define JH7110_SYSCLK_GMAC1_AHB 97
+#define JH7110_SYSCLK_GMAC1_AXI 98
+#define JH7110_SYSCLK_GMAC_SRC 99
+#define JH7110_SYSCLK_GMAC1_GTXCLK 100
+#define JH7110_SYSCLK_GMAC1_RMII_RTX 101
+#define JH7110_SYSCLK_GMAC1_PTP 102
+#define JH7110_SYSCLK_GMAC1_RX 103
+#define JH7110_SYSCLK_GMAC1_RX_INV 104
+#define JH7110_SYSCLK_GMAC1_TX 105
+#define JH7110_SYSCLK_GMAC1_TX_INV 106
+#define JH7110_SYSCLK_GMAC1_GTXC 107
+#define JH7110_SYSCLK_GMAC0_GTXCLK 108
+#define JH7110_SYSCLK_GMAC0_PTP 109
+#define JH7110_SYSCLK_GMAC_PHY 110
+#define JH7110_SYSCLK_GMAC0_GTXC 111
+#define JH7110_SYSCLK_IOMUX_APB 112
+#define JH7110_SYSCLK_MAILBOX_APB 113
+#define JH7110_SYSCLK_INT_CTRL_APB 114
+#define JH7110_SYSCLK_CAN0_APB 115
+#define JH7110_SYSCLK_CAN0_TIMER 116
+#define JH7110_SYSCLK_CAN0_CAN 117
+#define JH7110_SYSCLK_CAN1_APB 118
+#define JH7110_SYSCLK_CAN1_TIMER 119
+#define JH7110_SYSCLK_CAN1_CAN 120
+#define JH7110_SYSCLK_PWM_APB 121
+#define JH7110_SYSCLK_WDT_APB 122
+#define JH7110_SYSCLK_WDT_CORE 123
+#define JH7110_SYSCLK_TIMER_APB 124
+#define JH7110_SYSCLK_TIMER0 125
+#define JH7110_SYSCLK_TIMER1 126
+#define JH7110_SYSCLK_TIMER2 127
+#define JH7110_SYSCLK_TIMER3 128
+#define JH7110_SYSCLK_TEMP_APB 129
+#define JH7110_SYSCLK_TEMP_CORE 130
+#define JH7110_SYSCLK_SPI0_APB 131
+#define JH7110_SYSCLK_SPI1_APB 132
+#define JH7110_SYSCLK_SPI2_APB 133
+#define JH7110_SYSCLK_SPI3_APB 134
+#define JH7110_SYSCLK_SPI4_APB 135
+#define JH7110_SYSCLK_SPI5_APB 136
+#define JH7110_SYSCLK_SPI6_APB 137
+#define JH7110_SYSCLK_I2C0_APB 138
+#define JH7110_SYSCLK_I2C1_APB 139
+#define JH7110_SYSCLK_I2C2_APB 140
+#define JH7110_SYSCLK_I2C3_APB 141
+#define JH7110_SYSCLK_I2C4_APB 142
+#define JH7110_SYSCLK_I2C5_APB 143
+#define JH7110_SYSCLK_I2C6_APB 144
+#define JH7110_SYSCLK_UART0_APB 145
+#define JH7110_SYSCLK_UART0_CORE 146
+#define JH7110_SYSCLK_UART1_APB 147
+#define JH7110_SYSCLK_UART1_CORE 148
+#define JH7110_SYSCLK_UART2_APB 149
+#define JH7110_SYSCLK_UART2_CORE 150
+#define JH7110_SYSCLK_UART3_APB 151
+#define JH7110_SYSCLK_UART3_CORE 152
+#define JH7110_SYSCLK_UART4_APB 153
+#define JH7110_SYSCLK_UART4_CORE 154
+#define JH7110_SYSCLK_UART5_APB 155
+#define JH7110_SYSCLK_UART5_CORE 156
+#define JH7110_SYSCLK_PWMDAC_APB 157
+#define JH7110_SYSCLK_PWMDAC_CORE 158
+#define JH7110_SYSCLK_SPDIF_APB 159
+#define JH7110_SYSCLK_SPDIF_CORE 160
+#define JH7110_SYSCLK_I2STX0_APB 161
+#define JH7110_SYSCLK_I2STX0_BCLK_MST 162
+#define JH7110_SYSCLK_I2STX0_BCLK_MST_INV 163
+#define JH7110_SYSCLK_I2STX0_LRCK_MST 164
+#define JH7110_SYSCLK_I2STX0_BCLK 165
+#define JH7110_SYSCLK_I2STX0_BCLK_INV 166
+#define JH7110_SYSCLK_I2STX0_LRCK 167
+#define JH7110_SYSCLK_I2STX1_APB 168
+#define JH7110_SYSCLK_I2STX1_BCLK_MST 169
+#define JH7110_SYSCLK_I2STX1_BCLK_MST_INV 170
+#define JH7110_SYSCLK_I2STX1_LRCK_MST 171
+#define JH7110_SYSCLK_I2STX1_BCLK 172
+#define JH7110_SYSCLK_I2STX1_BCLK_INV 173
+#define JH7110_SYSCLK_I2STX1_LRCK 174
+#define JH7110_SYSCLK_I2SRX_APB 175
+#define JH7110_SYSCLK_I2SRX_BCLK_MST 176
+#define JH7110_SYSCLK_I2SRX_BCLK_MST_INV 177
+#define JH7110_SYSCLK_I2SRX_LRCK_MST 178
+#define JH7110_SYSCLK_I2SRX_BCLK 179
+#define JH7110_SYSCLK_I2SRX_BCLK_INV 180
+#define JH7110_SYSCLK_I2SRX_LRCK 181
+#define JH7110_SYSCLK_PDM_DMIC 182
+#define JH7110_SYSCLK_PDM_APB 183
+#define JH7110_SYSCLK_TDM_AHB 184
+#define JH7110_SYSCLK_TDM_APB 185
+#define JH7110_SYSCLK_TDM_INTERNAL 186
+#define JH7110_SYSCLK_TDM_TDM 187
+#define JH7110_SYSCLK_TDM_TDM_INV 188
+#define JH7110_SYSCLK_JTAG_CERTIFICATION_TRNG 189
+
+#define JH7110_SYSCLK_END 190
+
+#endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ */
diff --git a/include/dt-bindings/reset/starfive,jh7110-crg.h b/include/dt-bindings/reset/starfive,jh7110-crg.h
new file mode 100644
index 000000000000..b88216a4fe40
--- /dev/null
+++ b/include/dt-bindings/reset/starfive,jh7110-crg.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__
+#define __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__
+
+/* SYSCRG resets */
+#define JH7110_SYSRST_JTAG_APB 0
+#define JH7110_SYSRST_SYSCON_APB 1
+#define JH7110_SYSRST_IOMUX_APB 2
+#define JH7110_SYSRST_BUS 3
+#define JH7110_SYSRST_DEBUG 4
+#define JH7110_SYSRST_CORE0 5
+#define JH7110_SYSRST_CORE1 6
+#define JH7110_SYSRST_CORE2 7
+#define JH7110_SYSRST_CORE3 8
+#define JH7110_SYSRST_CORE4 9
+#define JH7110_SYSRST_CORE0_ST 10
+#define JH7110_SYSRST_CORE1_ST 11
+#define JH7110_SYSRST_CORE2_ST 12
+#define JH7110_SYSRST_CORE3_ST 13
+#define JH7110_SYSRST_CORE4_ST 14
+#define JH7110_SYSRST_TRACE0 15
+#define JH7110_SYSRST_TRACE1 16
+#define JH7110_SYSRST_TRACE2 17
+#define JH7110_SYSRST_TRACE3 18
+#define JH7110_SYSRST_TRACE4 19
+#define JH7110_SYSRST_TRACE_COM 20
+#define JH7110_SYSRST_GPU_APB 21
+#define JH7110_SYSRST_GPU_DOMA 22
+#define JH7110_SYSRST_NOC_BUS_APB 23
+#define JH7110_SYSRST_NOC_BUS_AXICFG0_AXI 24
+#define JH7110_SYSRST_NOC_BUS_CPU_AXI 25
+#define JH7110_SYSRST_NOC_BUS_DISP_AXI 26
+#define JH7110_SYSRST_NOC_BUS_GPU_AXI 27
+#define JH7110_SYSRST_NOC_BUS_ISP_AXI 28
+#define JH7110_SYSRST_NOC_BUS_DDRC 29
+#define JH7110_SYSRST_NOC_BUS_STG_AXI 30
+#define JH7110_SYSRST_NOC_BUS_VDEC_AXI 31
+
+#define JH7110_SYSRST_NOC_BUS_VENC_AXI 32
+#define JH7110_SYSRST_AXI_CFG1_AHB 33
+#define JH7110_SYSRST_AXI_CFG1_MAIN 34
+#define JH7110_SYSRST_AXI_CFG0_MAIN 35
+#define JH7110_SYSRST_AXI_CFG0_MAIN_DIV 36
+#define JH7110_SYSRST_AXI_CFG0_HIFI4 37
+#define JH7110_SYSRST_DDR_AXI 38
+#define JH7110_SYSRST_DDR_OSC 39
+#define JH7110_SYSRST_DDR_APB 40
+#define JH7110_SYSRST_ISP_TOP 41
+#define JH7110_SYSRST_ISP_TOP_AXI 42
+#define JH7110_SYSRST_VOUT_TOP_SRC 43
+#define JH7110_SYSRST_CODAJ12_AXI 44
+#define JH7110_SYSRST_CODAJ12_CORE 45
+#define JH7110_SYSRST_CODAJ12_APB 46
+#define JH7110_SYSRST_WAVE511_AXI 47
+#define JH7110_SYSRST_WAVE511_BPU 48
+#define JH7110_SYSRST_WAVE511_VCE 49
+#define JH7110_SYSRST_WAVE511_APB 50
+#define JH7110_SYSRST_VDEC_JPG 51
+#define JH7110_SYSRST_VDEC_MAIN 52
+#define JH7110_SYSRST_AXIMEM0_AXI 53
+#define JH7110_SYSRST_WAVE420L_AXI 54
+#define JH7110_SYSRST_WAVE420L_BPU 55
+#define JH7110_SYSRST_WAVE420L_VCE 56
+#define JH7110_SYSRST_WAVE420L_APB 57
+#define JH7110_SYSRST_AXIMEM1_AXI 58
+#define JH7110_SYSRST_AXIMEM2_AXI 59
+#define JH7110_SYSRST_INTMEM 60
+#define JH7110_SYSRST_QSPI_AHB 61
+#define JH7110_SYSRST_QSPI_APB 62
+#define JH7110_SYSRST_QSPI_REF 63
+
+#define JH7110_SYSRST_SDIO0_AHB 64
+#define JH7110_SYSRST_SDIO1_AHB 65
+#define JH7110_SYSRST_GMAC1_AXI 66
+#define JH7110_SYSRST_GMAC1_AHB 67
+#define JH7110_SYSRST_MAILBOX_APB 68
+#define JH7110_SYSRST_SPI0_APB 69
+#define JH7110_SYSRST_SPI1_APB 70
+#define JH7110_SYSRST_SPI2_APB 71
+#define JH7110_SYSRST_SPI3_APB 72
+#define JH7110_SYSRST_SPI4_APB 73
+#define JH7110_SYSRST_SPI5_APB 74
+#define JH7110_SYSRST_SPI6_APB 75
+#define JH7110_SYSRST_I2C0_APB 76
+#define JH7110_SYSRST_I2C1_APB 77
+#define JH7110_SYSRST_I2C2_APB 78
+#define JH7110_SYSRST_I2C3_APB 79
+#define JH7110_SYSRST_I2C4_APB 80
+#define JH7110_SYSRST_I2C5_APB 81
+#define JH7110_SYSRST_I2C6_APB 82
+#define JH7110_SYSRST_UART0_APB 83
+#define JH7110_SYSRST_UART0_CORE 84
+#define JH7110_SYSRST_UART1_APB 85
+#define JH7110_SYSRST_UART1_CORE 86
+#define JH7110_SYSRST_UART2_APB 87
+#define JH7110_SYSRST_UART2_CORE 88
+#define JH7110_SYSRST_UART3_APB 89
+#define JH7110_SYSRST_UART3_CORE 90
+#define JH7110_SYSRST_UART4_APB 91
+#define JH7110_SYSRST_UART4_CORE 92
+#define JH7110_SYSRST_UART5_APB 93
+#define JH7110_SYSRST_UART5_CORE 94
+#define JH7110_SYSRST_SPDIF_APB 95
+
+#define JH7110_SYSRST_PWMDAC_APB 96
+#define JH7110_SYSRST_PDM_DMIC 97
+#define JH7110_SYSRST_PDM_APB 98
+#define JH7110_SYSRST_I2SRX_APB 99
+#define JH7110_SYSRST_I2SRX_BCLK 100
+#define JH7110_SYSRST_I2STX0_APB 101
+#define JH7110_SYSRST_I2STX0_BCLK 102
+#define JH7110_SYSRST_I2STX1_APB 103
+#define JH7110_SYSRST_I2STX1_BCLK 104
+#define JH7110_SYSRST_TDM_AHB 105
+#define JH7110_SYSRST_TDM_CORE 106
+#define JH7110_SYSRST_TDM_APB 107
+#define JH7110_SYSRST_PWM_APB 108
+#define JH7110_SYSRST_WDT_APB 109
+#define JH7110_SYSRST_WDT_CORE 110
+#define JH7110_SYSRST_CAN0_APB 111
+#define JH7110_SYSRST_CAN0_CORE 112
+#define JH7110_SYSRST_CAN0_TIMER 113
+#define JH7110_SYSRST_CAN1_APB 114
+#define JH7110_SYSRST_CAN1_CORE 115
+#define JH7110_SYSRST_CAN1_TIMER 116
+#define JH7110_SYSRST_TIMER_APB 117
+#define JH7110_SYSRST_TIMER0 118
+#define JH7110_SYSRST_TIMER1 119
+#define JH7110_SYSRST_TIMER2 120
+#define JH7110_SYSRST_TIMER3 121
+#define JH7110_SYSRST_INT_CTRL_APB 122
+#define JH7110_SYSRST_TEMP_APB 123
+#define JH7110_SYSRST_TEMP_CORE 124
+#define JH7110_SYSRST_JTAG_CERTIFICATION 125
+
+#define JH7110_SYSRST_END 126
+
+#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__ */
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (10 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 13:14 ` Conor Dooley
2023-03-11 14:18 ` Rob Herring
2023-03-11 9:07 ` [PATCH v5 13/21] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
` (8 subsequent siblings)
20 siblings, 2 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add bindings for the always-on clock and reset generator (AONCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../clock/starfive,jh7110-aoncrg.yaml | 107 ++++++++++++++++++
.../dt-bindings/clock/starfive,jh7110-crg.h | 18 +++
.../dt-bindings/reset/starfive,jh7110-crg.h | 12 ++
3 files changed, 137 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
new file mode 100644
index 000000000000..923680a44aef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Always-On Clock and Reset Generator
+
+maintainers:
+ - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+ compatible:
+ const: starfive,jh7110-aoncrg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ oneOf:
+ - items:
+ - description: Main Oscillator (24 MHz)
+ - description: GMAC0 RMII reference or GMAC0 RGMII RX
+ - description: STG AXI/AHB
+ - description: APB Bus
+ - description: GMAC0 GTX
+
+ - items:
+ - description: Main Oscillator (24 MHz)
+ - description: GMAC0 RMII reference or GMAC0 RGMII RX
+ - description: STG AXI/AHB or GMAC0 RGMII RX
+ - description: APB Bus or STG AXI/AHB
+ - description: GMAC0 GTX or APB Bus
+ - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
+
+ - items:
+ - description: Main Oscillator (24 MHz)
+ - description: GMAC0 RMII reference
+ - description: GMAC0 RGMII RX
+ - description: STG AXI/AHB
+ - description: APB Bus
+ - description: GMAC0 GTX
+ - description: RTC Oscillator (32.768 kHz)
+
+ clock-names:
+ oneOf:
+ - minItems: 5
+ items:
+ - const: osc
+ - enum:
+ - gmac0_rmii_refin
+ - gmac0_rgmii_rxin
+ - const: stg_axiahb
+ - const: apb_bus
+ - const: gmac0_gtxclk
+ - const: rtc_osc
+
+ - minItems: 6
+ items:
+ - const: osc
+ - const: gmac0_rmii_refin
+ - const: gmac0_rgmii_rxin
+ - const: stg_axiahb
+ - const: apb_bus
+ - const: gmac0_gtxclk
+ - const: rtc_osc
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+ '#reset-cells':
+ const: 1
+ description:
+ See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+ clock-controller@17000000 {
+ compatible = "starfive,jh7110-aoncrg";
+ reg = <0x17000000 0x10000>;
+ clocks = <&osc>, <&gmac0_rmii_refin>,
+ <&gmac0_rgmii_rxin>,
+ <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg JH7110_SYSCLK_APB_BUS>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+ <&rtc_osc>;
+ clock-names = "osc", "gmac0_rmii_refin",
+ "gmac0_rgmii_rxin", "stg_axiahb",
+ "apb_bus", "gmac0_gtxclk",
+ "rtc_osc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
index fdd1852e34cc..06257bfd9ac1 100644
--- a/include/dt-bindings/clock/starfive,jh7110-crg.h
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -200,4 +200,22 @@
#define JH7110_SYSCLK_END 190
+/* AONCRG clocks */
+#define JH7110_AONCLK_OSC_DIV4 0
+#define JH7110_AONCLK_APB_FUNC 1
+#define JH7110_AONCLK_GMAC0_AHB 2
+#define JH7110_AONCLK_GMAC0_AXI 3
+#define JH7110_AONCLK_GMAC0_RMII_RTX 4
+#define JH7110_AONCLK_GMAC0_TX 5
+#define JH7110_AONCLK_GMAC0_TX_INV 6
+#define JH7110_AONCLK_GMAC0_RX 7
+#define JH7110_AONCLK_GMAC0_RX_INV 8
+#define JH7110_AONCLK_OTPC_APB 9
+#define JH7110_AONCLK_RTC_APB 10
+#define JH7110_AONCLK_RTC_INTERNAL 11
+#define JH7110_AONCLK_RTC_32K 12
+#define JH7110_AONCLK_RTC_CAL 13
+
+#define JH7110_AONCLK_END 14
+
#endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ */
diff --git a/include/dt-bindings/reset/starfive,jh7110-crg.h b/include/dt-bindings/reset/starfive,jh7110-crg.h
index b88216a4fe40..d78e38690ceb 100644
--- a/include/dt-bindings/reset/starfive,jh7110-crg.h
+++ b/include/dt-bindings/reset/starfive,jh7110-crg.h
@@ -139,4 +139,16 @@
#define JH7110_SYSRST_END 126
+/* AONCRG resets */
+#define JH7110_AONRST_GMAC0_AXI 0
+#define JH7110_AONRST_GMAC0_AHB 1
+#define JH7110_AONRST_IOMUX 2
+#define JH7110_AONRST_PMU_APB 3
+#define JH7110_AONRST_PMU_WKUP 4
+#define JH7110_AONRST_RTC_APB 5
+#define JH7110_AONRST_RTC_CAL 6
+#define JH7110_AONRST_RTC_32K 7
+
+#define JH7110_AONRST_END 8
+
#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__ */
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 13/21] clk: starfive: Add StarFive JH7110 system clock driver
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (11 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 14/21] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
` (7 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add driver for the StarFive JH7110 system clock controller and
register an auxiliary device for system reset controller which
is named as "reset-sys".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/clk/starfive/Kconfig | 11 +
drivers/clk/starfive/Makefile | 2 +
.../clk/starfive/clk-starfive-jh7110-sys.c | 451 ++++++++++++++++++
drivers/clk/starfive/clk-starfive-jh71x0.c | 50 ++
drivers/clk/starfive/clk-starfive-jh71x0.h | 8 +
5 files changed, 522 insertions(+)
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 3ceeb19b5eda..670c5084aeb8 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -20,3 +20,14 @@ config CLK_STARFIVE_JH7100_AUDIO
help
Say Y or M here to support the audio clocks on the StarFive JH7100
SoC.
+
+config CLK_STARFIVE_JH7110_SYS
+ bool "StarFive JH7110 system clock support"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ select AUXILIARY_BUS
+ select CLK_STARFIVE_JH71X0
+ select RESET_STARFIVE_JH7110
+ default ARCH_STARFIVE
+ help
+ Say yes here to support the system clock controller on the
+ StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 82edfa9f9cb8..5ca4e887fb9c 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_CLK_STARFIVE_JH71X0) += clk-starfive-jh71x0.o
obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
+
+obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS) += clk-starfive-jh7110-sys.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
new file mode 100644
index 000000000000..b90d8035ba18
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 System Clock Driver
+ *
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+#include "clk-starfive-jh71x0.h"
+
+/* external clocks */
+#define JH7110_SYSCLK_OSC (JH7110_SYSCLK_END + 0)
+#define JH7110_SYSCLK_GMAC1_RMII_REFIN (JH7110_SYSCLK_END + 1)
+#define JH7110_SYSCLK_GMAC1_RGMII_RXIN (JH7110_SYSCLK_END + 2)
+#define JH7110_SYSCLK_I2STX_BCLK_EXT (JH7110_SYSCLK_END + 3)
+#define JH7110_SYSCLK_I2STX_LRCK_EXT (JH7110_SYSCLK_END + 4)
+#define JH7110_SYSCLK_I2SRX_BCLK_EXT (JH7110_SYSCLK_END + 5)
+#define JH7110_SYSCLK_I2SRX_LRCK_EXT (JH7110_SYSCLK_END + 6)
+#define JH7110_SYSCLK_TDM_EXT (JH7110_SYSCLK_END + 7)
+#define JH7110_SYSCLK_MCLK_EXT (JH7110_SYSCLK_END + 8)
+#define JH7110_SYSCLK_PLL0_OUT (JH7110_SYSCLK_END + 9)
+#define JH7110_SYSCLK_PLL1_OUT (JH7110_SYSCLK_END + 10)
+#define JH7110_SYSCLK_PLL2_OUT (JH7110_SYSCLK_END + 11)
+
+static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = {
+ /* root */
+ JH71X0__MUX(JH7110_SYSCLK_CPU_ROOT, "cpu_root", 2,
+ JH7110_SYSCLK_OSC,
+ JH7110_SYSCLK_PLL0_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_CPU_CORE, "cpu_core", 7, JH7110_SYSCLK_CPU_ROOT),
+ JH71X0__DIV(JH7110_SYSCLK_CPU_BUS, "cpu_bus", 2, JH7110_SYSCLK_CPU_CORE),
+ JH71X0__MUX(JH7110_SYSCLK_GPU_ROOT, "gpu_root", 2,
+ JH7110_SYSCLK_PLL2_OUT,
+ JH7110_SYSCLK_PLL1_OUT),
+ JH71X0_MDIV(JH7110_SYSCLK_PERH_ROOT, "perh_root", 2, 2,
+ JH7110_SYSCLK_PLL0_OUT,
+ JH7110_SYSCLK_PLL2_OUT),
+ JH71X0__MUX(JH7110_SYSCLK_BUS_ROOT, "bus_root", 2,
+ JH7110_SYSCLK_OSC,
+ JH7110_SYSCLK_PLL2_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_NOCSTG_BUS, "nocstg_bus", 3, JH7110_SYSCLK_BUS_ROOT),
+ JH71X0__DIV(JH7110_SYSCLK_AXI_CFG0, "axi_cfg0", 3, JH7110_SYSCLK_BUS_ROOT),
+ JH71X0__DIV(JH7110_SYSCLK_STG_AXIAHB, "stg_axiahb", 2, JH7110_SYSCLK_AXI_CFG0),
+ JH71X0_GATE(JH7110_SYSCLK_AHB0, "ahb0", CLK_IS_CRITICAL, JH7110_SYSCLK_STG_AXIAHB),
+ JH71X0_GATE(JH7110_SYSCLK_AHB1, "ahb1", CLK_IS_CRITICAL, JH7110_SYSCLK_STG_AXIAHB),
+ JH71X0__DIV(JH7110_SYSCLK_APB_BUS, "apb_bus", 8, JH7110_SYSCLK_STG_AXIAHB),
+ JH71X0_GATE(JH7110_SYSCLK_APB0, "apb0", CLK_IS_CRITICAL, JH7110_SYSCLK_APB_BUS),
+ JH71X0__DIV(JH7110_SYSCLK_PLL0_DIV2, "pll0_div2", 2, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV2, "pll1_div2", 2, JH7110_SYSCLK_PLL1_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_PLL2_DIV2, "pll2_div2", 2, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_AUDIO_ROOT, "audio_root", 8, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_MCLK_INNER, "mclk_inner", 64, JH7110_SYSCLK_AUDIO_ROOT),
+ JH71X0__MUX(JH7110_SYSCLK_MCLK, "mclk", 2,
+ JH7110_SYSCLK_MCLK_INNER,
+ JH7110_SYSCLK_MCLK_EXT),
+ JH71X0_GATE(JH7110_SYSCLK_MCLK_OUT, "mclk_out", 0, JH7110_SYSCLK_MCLK_INNER),
+ JH71X0_MDIV(JH7110_SYSCLK_ISP_2X, "isp_2x", 8, 2,
+ JH7110_SYSCLK_PLL2_OUT,
+ JH7110_SYSCLK_PLL1_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_ISP_AXI, "isp_axi", 4, JH7110_SYSCLK_ISP_2X),
+ JH71X0_GDIV(JH7110_SYSCLK_GCLK0, "gclk0", 0, 62, JH7110_SYSCLK_PLL0_DIV2),
+ JH71X0_GDIV(JH7110_SYSCLK_GCLK1, "gclk1", 0, 62, JH7110_SYSCLK_PLL1_DIV2),
+ JH71X0_GDIV(JH7110_SYSCLK_GCLK2, "gclk2", 0, 62, JH7110_SYSCLK_PLL2_DIV2),
+ /* cores */
+ JH71X0_GATE(JH7110_SYSCLK_CORE, "core", CLK_IS_CRITICAL, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_CORE1, "core1", CLK_IS_CRITICAL, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_CORE2, "core2", CLK_IS_CRITICAL, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_CORE3, "core3", CLK_IS_CRITICAL, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_CORE4, "core4", CLK_IS_CRITICAL, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_DEBUG, "debug", 0, JH7110_SYSCLK_CPU_BUS),
+ JH71X0__DIV(JH7110_SYSCLK_RTC_TOGGLE, "rtc_toggle", 6, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE0, "trace0", 0, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE1, "trace1", 0, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE2, "trace2", 0, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE3, "trace3", 0, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE4, "trace4", 0, JH7110_SYSCLK_CPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_TRACE_COM, "trace_com", 0, JH7110_SYSCLK_CPU_BUS),
+ /* noc */
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_CPU_AXI, "noc_bus_cpu_axi", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_CPU_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_AXICFG0_AXI, "noc_bus_axicfg0_axi", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_AXI_CFG0),
+ /* ddr */
+ JH71X0__DIV(JH7110_SYSCLK_OSC_DIV2, "osc_div2", 2, JH7110_SYSCLK_OSC),
+ JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV4, "pll1_div4", 2, JH7110_SYSCLK_PLL1_DIV2),
+ JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV8, "pll1_div8", 2, JH7110_SYSCLK_PLL1_DIV4),
+ JH71X0__MUX(JH7110_SYSCLK_DDR_BUS, "ddr_bus", 4,
+ JH7110_SYSCLK_OSC_DIV2,
+ JH7110_SYSCLK_PLL1_DIV2,
+ JH7110_SYSCLK_PLL1_DIV4,
+ JH7110_SYSCLK_PLL1_DIV8),
+ JH71X0_GATE(JH7110_SYSCLK_DDR_AXI, "ddr_axi", CLK_IS_CRITICAL, JH7110_SYSCLK_DDR_BUS),
+ /* gpu */
+ JH71X0__DIV(JH7110_SYSCLK_GPU_CORE, "gpu_core", 7, JH7110_SYSCLK_GPU_ROOT),
+ JH71X0_GATE(JH7110_SYSCLK_GPU_CORE_CLK, "gpu_core_clk", 0, JH7110_SYSCLK_GPU_CORE),
+ JH71X0_GATE(JH7110_SYSCLK_GPU_SYS_CLK, "gpu_sys_clk", 0, JH7110_SYSCLK_ISP_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_GPU_APB, "gpu_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GDIV(JH7110_SYSCLK_GPU_RTC_TOGGLE, "gpu_rtc_toggle", 0, 12, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_GPU_AXI, "noc_bus_gpu_axi", 0, JH7110_SYSCLK_GPU_CORE),
+ /* isp */
+ JH71X0_GATE(JH7110_SYSCLK_ISP_TOP_CORE, "isp_top_core", 0, JH7110_SYSCLK_ISP_2X),
+ JH71X0_GATE(JH7110_SYSCLK_ISP_TOP_AXI, "isp_top_axi", 0, JH7110_SYSCLK_ISP_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_ISP_AXI, "noc_bus_isp_axi", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_ISP_AXI),
+ /* hifi4 */
+ JH71X0__DIV(JH7110_SYSCLK_HIFI4_CORE, "hifi4_core", 15, JH7110_SYSCLK_BUS_ROOT),
+ JH71X0__DIV(JH7110_SYSCLK_HIFI4_AXI, "hifi4_axi", 2, JH7110_SYSCLK_HIFI4_CORE),
+ /* axi_cfg1 */
+ JH71X0_GATE(JH7110_SYSCLK_AXI_CFG1_MAIN, "axi_cfg1_main", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_ISP_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_AXI_CFG1_AHB, "axi_cfg1_ahb", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_AHB0),
+ /* vout */
+ JH71X0_GATE(JH7110_SYSCLK_VOUT_SRC, "vout_src", 0, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_VOUT_AXI, "vout_axi", 7, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_DISP_AXI, "noc_bus_disp_axi", 0, JH7110_SYSCLK_VOUT_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_VOUT_TOP_AHB, "vout_top_ahb", 0, JH7110_SYSCLK_AHB1),
+ JH71X0_GATE(JH7110_SYSCLK_VOUT_TOP_AXI, "vout_top_axi", 0, JH7110_SYSCLK_VOUT_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK, "vout_top_hdmitx0_mclk", 0,
+ JH7110_SYSCLK_MCLK),
+ JH71X0__DIV(JH7110_SYSCLK_VOUT_TOP_MIPIPHY_REF, "vout_top_mipiphy_ref", 2,
+ JH7110_SYSCLK_OSC),
+ /* jpegc */
+ JH71X0__DIV(JH7110_SYSCLK_JPEGC_AXI, "jpegc_axi", 16, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_CODAJ12_AXI, "codaj12_axi", 0, JH7110_SYSCLK_JPEGC_AXI),
+ JH71X0_GDIV(JH7110_SYSCLK_CODAJ12_CORE, "codaj12_core", 0, 16, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_CODAJ12_APB, "codaj12_apb", 0, JH7110_SYSCLK_APB_BUS),
+ /* vdec */
+ JH71X0__DIV(JH7110_SYSCLK_VDEC_AXI, "vdec_axi", 7, JH7110_SYSCLK_BUS_ROOT),
+ JH71X0_GATE(JH7110_SYSCLK_WAVE511_AXI, "wave511_axi", 0, JH7110_SYSCLK_VDEC_AXI),
+ JH71X0_GDIV(JH7110_SYSCLK_WAVE511_BPU, "wave511_bpu", 0, 7, JH7110_SYSCLK_BUS_ROOT),
+ JH71X0_GDIV(JH7110_SYSCLK_WAVE511_VCE, "wave511_vce", 0, 7, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_WAVE511_APB, "wave511_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_VDEC_JPG, "vdec_jpg", 0, JH7110_SYSCLK_JPEGC_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_VDEC_MAIN, "vdec_main", 0, JH7110_SYSCLK_VDEC_AXI),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_VDEC_AXI, "noc_bus_vdec_axi", 0, JH7110_SYSCLK_VDEC_AXI),
+ /* venc */
+ JH71X0__DIV(JH7110_SYSCLK_VENC_AXI, "venc_axi", 15, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_WAVE420L_AXI, "wave420l_axi", 0, JH7110_SYSCLK_VENC_AXI),
+ JH71X0_GDIV(JH7110_SYSCLK_WAVE420L_BPU, "wave420l_bpu", 0, 15, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GDIV(JH7110_SYSCLK_WAVE420L_VCE, "wave420l_vce", 0, 15, JH7110_SYSCLK_PLL2_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_WAVE420L_APB, "wave420l_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_VENC_AXI, "noc_bus_venc_axi", 0, JH7110_SYSCLK_VENC_AXI),
+ /* axi_cfg0 */
+ JH71X0_GATE(JH7110_SYSCLK_AXI_CFG0_MAIN_DIV, "axi_cfg0_main_div", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_AHB1),
+ JH71X0_GATE(JH7110_SYSCLK_AXI_CFG0_MAIN, "axi_cfg0_main", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_AXI_CFG0),
+ JH71X0_GATE(JH7110_SYSCLK_AXI_CFG0_HIFI4, "axi_cfg0_hifi4", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_HIFI4_AXI),
+ /* intmem */
+ JH71X0_GATE(JH7110_SYSCLK_AXIMEM2_AXI, "aximem2_axi", 0, JH7110_SYSCLK_AXI_CFG0),
+ /* qspi */
+ JH71X0_GATE(JH7110_SYSCLK_QSPI_AHB, "qspi_ahb", CLK_IGNORE_UNUSED, JH7110_SYSCLK_AHB1),
+ JH71X0_GATE(JH7110_SYSCLK_QSPI_APB, "qspi_apb", CLK_IGNORE_UNUSED, JH7110_SYSCLK_APB_BUS),
+ JH71X0__DIV(JH7110_SYSCLK_QSPI_REF_SRC, "qspi_ref_src", 16, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0_GMUX(JH7110_SYSCLK_QSPI_REF, "qspi_ref", 0, 2,
+ JH7110_SYSCLK_OSC,
+ JH7110_SYSCLK_QSPI_REF_SRC),
+ /* sdio */
+ JH71X0_GATE(JH7110_SYSCLK_SDIO0_AHB, "sdio0_ahb", 0, JH7110_SYSCLK_AHB0),
+ JH71X0_GATE(JH7110_SYSCLK_SDIO1_AHB, "sdio1_ahb", 0, JH7110_SYSCLK_AHB0),
+ JH71X0_GDIV(JH7110_SYSCLK_SDIO0_SDCARD, "sdio0_sdcard", 0, 15, JH7110_SYSCLK_AXI_CFG0),
+ JH71X0_GDIV(JH7110_SYSCLK_SDIO1_SDCARD, "sdio1_sdcard", 0, 15, JH7110_SYSCLK_AXI_CFG0),
+ /* stg */
+ JH71X0__DIV(JH7110_SYSCLK_USB_125M, "usb_125m", 15, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0_GATE(JH7110_SYSCLK_NOC_BUS_STG_AXI, "noc_bus_stg_axi", CLK_IS_CRITICAL,
+ JH7110_SYSCLK_NOCSTG_BUS),
+ /* gmac1 */
+ JH71X0_GATE(JH7110_SYSCLK_GMAC1_AHB, "gmac1_ahb", 0, JH7110_SYSCLK_AHB0),
+ JH71X0_GATE(JH7110_SYSCLK_GMAC1_AXI, "gmac1_axi", 0, JH7110_SYSCLK_STG_AXIAHB),
+ JH71X0__DIV(JH7110_SYSCLK_GMAC_SRC, "gmac_src", 7, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_GMAC1_GTXCLK, "gmac1_gtxclk", 15, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0__DIV(JH7110_SYSCLK_GMAC1_RMII_RTX, "gmac1_rmii_rtx", 30,
+ JH7110_SYSCLK_GMAC1_RMII_REFIN),
+ JH71X0_GDIV(JH7110_SYSCLK_GMAC1_PTP, "gmac1_ptp", 0, 31, JH7110_SYSCLK_GMAC_SRC),
+ JH71X0__MUX(JH7110_SYSCLK_GMAC1_RX, "gmac1_rx", 2,
+ JH7110_SYSCLK_GMAC1_RGMII_RXIN,
+ JH7110_SYSCLK_GMAC1_RMII_RTX),
+ JH71X0__INV(JH7110_SYSCLK_GMAC1_RX_INV, "gmac1_rx_inv", JH7110_SYSCLK_GMAC1_RX),
+ JH71X0_GMUX(JH7110_SYSCLK_GMAC1_TX, "gmac1_tx", CLK_SET_RATE_PARENT, 2,
+ JH7110_SYSCLK_GMAC1_GTXCLK,
+ JH7110_SYSCLK_GMAC1_RMII_RTX),
+ JH71X0__INV(JH7110_SYSCLK_GMAC1_TX_INV, "gmac1_tx_inv", JH7110_SYSCLK_GMAC1_TX),
+ JH71X0_GATE(JH7110_SYSCLK_GMAC1_GTXC, "gmac1_gtxc", CLK_SET_RATE_PARENT,
+ JH7110_SYSCLK_GMAC1_GTXCLK),
+ /* gmac0 */
+ JH71X0_GDIV(JH7110_SYSCLK_GMAC0_GTXCLK, "gmac0_gtxclk", 0, 15, JH7110_SYSCLK_PLL0_OUT),
+ JH71X0_GDIV(JH7110_SYSCLK_GMAC0_PTP, "gmac0_ptp", 0, 31, JH7110_SYSCLK_GMAC_SRC),
+ JH71X0_GDIV(JH7110_SYSCLK_GMAC_PHY, "gmac_phy", 0, 31, JH7110_SYSCLK_GMAC_SRC),
+ JH71X0_GATE(JH7110_SYSCLK_GMAC0_GTXC, "gmac0_gtxc", CLK_SET_RATE_PARENT,
+ JH7110_SYSCLK_GMAC0_GTXCLK),
+ /* apb misc */
+ JH71X0_GATE(JH7110_SYSCLK_IOMUX_APB, "iomux_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_MAILBOX_APB, "mailbox_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_INT_CTRL_APB, "int_ctrl_apb", 0, JH7110_SYSCLK_APB_BUS),
+ /* can0 */
+ JH71X0_GATE(JH7110_SYSCLK_CAN0_APB, "can0_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GDIV(JH7110_SYSCLK_CAN0_TIMER, "can0_timer", 0, 24, JH7110_SYSCLK_OSC),
+ JH71X0_GDIV(JH7110_SYSCLK_CAN0_CAN, "can0_can", 0, 63, JH7110_SYSCLK_PERH_ROOT),
+ /* can1 */
+ JH71X0_GATE(JH7110_SYSCLK_CAN1_APB, "can1_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GDIV(JH7110_SYSCLK_CAN1_TIMER, "can1_timer", 0, 24, JH7110_SYSCLK_OSC),
+ JH71X0_GDIV(JH7110_SYSCLK_CAN1_CAN, "can1_can", 0, 63, JH7110_SYSCLK_PERH_ROOT),
+ /* pwm */
+ JH71X0_GATE(JH7110_SYSCLK_PWM_APB, "pwm_apb", 0, JH7110_SYSCLK_APB_BUS),
+ /* wdt */
+ JH71X0_GATE(JH7110_SYSCLK_WDT_APB, "wdt_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_WDT_CORE, "wdt_core", 0, JH7110_SYSCLK_OSC),
+ /* timer */
+ JH71X0_GATE(JH7110_SYSCLK_TIMER_APB, "timer_apb", CLK_IGNORE_UNUSED,
+ JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_TIMER0, "timer0", CLK_IGNORE_UNUSED, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_TIMER1, "timer1", CLK_IGNORE_UNUSED, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_TIMER2, "timer2", CLK_IGNORE_UNUSED, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_TIMER3, "timer3", CLK_IGNORE_UNUSED, JH7110_SYSCLK_OSC),
+ /* temp sensor */
+ JH71X0_GATE(JH7110_SYSCLK_TEMP_APB, "temp_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GDIV(JH7110_SYSCLK_TEMP_CORE, "temp_core", 0, 24, JH7110_SYSCLK_OSC),
+ /* spi */
+ JH71X0_GATE(JH7110_SYSCLK_SPI0_APB, "spi0_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_SPI1_APB, "spi1_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_SPI2_APB, "spi2_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_SPI3_APB, "spi3_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_SPI4_APB, "spi4_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_SPI5_APB, "spi5_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_SPI6_APB, "spi6_apb", 0, JH7110_SYSCLK_APB_BUS),
+ /* i2c */
+ JH71X0_GATE(JH7110_SYSCLK_I2C0_APB, "i2c0_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_I2C1_APB, "i2c1_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_I2C2_APB, "i2c2_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_I2C3_APB, "i2c3_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_I2C4_APB, "i2c4_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_I2C5_APB, "i2c5_apb", 0, JH7110_SYSCLK_APB_BUS),
+ JH71X0_GATE(JH7110_SYSCLK_I2C6_APB, "i2c6_apb", 0, JH7110_SYSCLK_APB_BUS),
+ /* uart */
+ JH71X0_GATE(JH7110_SYSCLK_UART0_APB, "uart0_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_UART0_CORE, "uart0_core", 0, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_UART1_APB, "uart1_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_UART1_CORE, "uart1_core", 0, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_UART2_APB, "uart2_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_UART2_CORE, "uart2_core", 0, JH7110_SYSCLK_OSC),
+ JH71X0_GATE(JH7110_SYSCLK_UART3_APB, "uart3_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_UART3_CORE, "uart3_core", 0, 10, JH7110_SYSCLK_PERH_ROOT),
+ JH71X0_GATE(JH7110_SYSCLK_UART4_APB, "uart4_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_UART4_CORE, "uart4_core", 0, 10, JH7110_SYSCLK_PERH_ROOT),
+ JH71X0_GATE(JH7110_SYSCLK_UART5_APB, "uart5_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_UART5_CORE, "uart5_core", 0, 10, JH7110_SYSCLK_PERH_ROOT),
+ /* pwmdac */
+ JH71X0_GATE(JH7110_SYSCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_PWMDAC_CORE, "pwmdac_core", 0, 256, JH7110_SYSCLK_AUDIO_ROOT),
+ /* spdif */
+ JH71X0_GATE(JH7110_SYSCLK_SPDIF_APB, "spdif_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GATE(JH7110_SYSCLK_SPDIF_CORE, "spdif_core", 0, JH7110_SYSCLK_MCLK),
+ /* i2stx0 */
+ JH71X0_GATE(JH7110_SYSCLK_I2STX0_APB, "i2stx0_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_I2STX0_BCLK_MST, "i2stx0_bclk_mst", 0, 32, JH7110_SYSCLK_MCLK),
+ JH71X0__INV(JH7110_SYSCLK_I2STX0_BCLK_MST_INV, "i2stx0_bclk_mst_inv",
+ JH7110_SYSCLK_I2STX0_BCLK_MST),
+ JH71X0_MDIV(JH7110_SYSCLK_I2STX0_LRCK_MST, "i2stx0_lrck_mst", 64, 2,
+ JH7110_SYSCLK_I2STX0_BCLK_MST_INV,
+ JH7110_SYSCLK_I2STX0_BCLK_MST),
+ JH71X0__MUX(JH7110_SYSCLK_I2STX0_BCLK, "i2stx0_bclk", 2,
+ JH7110_SYSCLK_I2STX0_BCLK_MST,
+ JH7110_SYSCLK_I2STX_BCLK_EXT),
+ JH71X0__INV(JH7110_SYSCLK_I2STX0_BCLK_INV, "i2stx0_bclk_inv", JH7110_SYSCLK_I2STX0_BCLK),
+ JH71X0__MUX(JH7110_SYSCLK_I2STX0_LRCK, "i2stx0_lrck", 2,
+ JH7110_SYSCLK_I2STX0_LRCK_MST,
+ JH7110_SYSCLK_I2STX_LRCK_EXT),
+ /* i2stx1 */
+ JH71X0_GATE(JH7110_SYSCLK_I2STX1_APB, "i2stx1_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_I2STX1_BCLK_MST, "i2stx1_bclk_mst", 0, 32, JH7110_SYSCLK_MCLK),
+ JH71X0__INV(JH7110_SYSCLK_I2STX1_BCLK_MST_INV, "i2stx1_bclk_mst_inv",
+ JH7110_SYSCLK_I2STX1_BCLK_MST),
+ JH71X0_MDIV(JH7110_SYSCLK_I2STX1_LRCK_MST, "i2stx1_lrck_mst", 64, 2,
+ JH7110_SYSCLK_I2STX1_BCLK_MST_INV,
+ JH7110_SYSCLK_I2STX1_BCLK_MST),
+ JH71X0__MUX(JH7110_SYSCLK_I2STX1_BCLK, "i2stx1_bclk", 2,
+ JH7110_SYSCLK_I2STX1_BCLK_MST,
+ JH7110_SYSCLK_I2STX_BCLK_EXT),
+ JH71X0__INV(JH7110_SYSCLK_I2STX1_BCLK_INV, "i2stx1_bclk_inv", JH7110_SYSCLK_I2STX1_BCLK),
+ JH71X0__MUX(JH7110_SYSCLK_I2STX1_LRCK, "i2stx1_lrck", 2,
+ JH7110_SYSCLK_I2STX1_LRCK_MST,
+ JH7110_SYSCLK_I2STX_LRCK_EXT),
+ /* i2srx */
+ JH71X0_GATE(JH7110_SYSCLK_I2SRX_APB, "i2srx_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_I2SRX_BCLK_MST, "i2srx_bclk_mst", 0, 32, JH7110_SYSCLK_MCLK),
+ JH71X0__INV(JH7110_SYSCLK_I2SRX_BCLK_MST_INV, "i2srx_bclk_mst_inv",
+ JH7110_SYSCLK_I2SRX_BCLK_MST),
+ JH71X0_MDIV(JH7110_SYSCLK_I2SRX_LRCK_MST, "i2srx_lrck_mst", 64, 2,
+ JH7110_SYSCLK_I2SRX_BCLK_MST_INV,
+ JH7110_SYSCLK_I2SRX_BCLK_MST),
+ JH71X0__MUX(JH7110_SYSCLK_I2SRX_BCLK, "i2srx_bclk", 2,
+ JH7110_SYSCLK_I2SRX_BCLK_MST,
+ JH7110_SYSCLK_I2SRX_BCLK_EXT),
+ JH71X0__INV(JH7110_SYSCLK_I2SRX_BCLK_INV, "i2srx_bclk_inv", JH7110_SYSCLK_I2SRX_BCLK),
+ JH71X0__MUX(JH7110_SYSCLK_I2SRX_LRCK, "i2srx_lrck", 2,
+ JH7110_SYSCLK_I2SRX_LRCK_MST,
+ JH7110_SYSCLK_I2SRX_LRCK_EXT),
+ /* pdm */
+ JH71X0_GDIV(JH7110_SYSCLK_PDM_DMIC, "pdm_dmic", 0, 64, JH7110_SYSCLK_MCLK),
+ JH71X0_GATE(JH7110_SYSCLK_PDM_APB, "pdm_apb", 0, JH7110_SYSCLK_APB0),
+ /* tdm */
+ JH71X0_GATE(JH7110_SYSCLK_TDM_AHB, "tdm_ahb", 0, JH7110_SYSCLK_AHB0),
+ JH71X0_GATE(JH7110_SYSCLK_TDM_APB, "tdm_apb", 0, JH7110_SYSCLK_APB0),
+ JH71X0_GDIV(JH7110_SYSCLK_TDM_INTERNAL, "tdm_internal", 0, 64, JH7110_SYSCLK_MCLK),
+ JH71X0__MUX(JH7110_SYSCLK_TDM_TDM, "tdm_tdm", 2,
+ JH7110_SYSCLK_TDM_INTERNAL,
+ JH7110_SYSCLK_TDM_EXT),
+ JH71X0__INV(JH7110_SYSCLK_TDM_TDM_INV, "tdm_tdm_inv", JH7110_SYSCLK_TDM_TDM),
+ /* jtag */
+ JH71X0__DIV(JH7110_SYSCLK_JTAG_CERTIFICATION_TRNG, "jtag_certification_trng", 4,
+ JH7110_SYSCLK_OSC),
+};
+
+static struct clk_hw *jh7110_sysclk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct jh71x0_clk_priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx < JH7110_SYSCLK_END)
+ return &priv->reg[idx].hw;
+
+ if (idx >= JH7110_SYSCLK_PLL0_OUT && idx <= JH7110_SYSCLK_PLL2_OUT)
+ return priv->pll[idx - JH7110_SYSCLK_PLL0_OUT];
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int __init jh7110_syscrg_probe(struct platform_device *pdev)
+{
+ struct jh71x0_clk_priv *priv;
+ unsigned int idx;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev,
+ struct_size(priv, reg, JH7110_SYSCLK_END),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->rmw_lock);
+ priv->dev = &pdev->dev;
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ dev_set_drvdata(priv->dev, (void *)(&priv->base));
+
+ /*
+ * These PLL clocks are not actually fixed factor clocks and can be
+ * controlled by the syscon registers of JH7110. They will be dropped
+ * and registered in the PLL clock driver instead.
+ */
+ /* 24MHz -> 1000.0MHz */
+ priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out",
+ "osc", 0, 125, 3);
+ if (IS_ERR(priv->pll[0]))
+ return PTR_ERR(priv->pll[0]);
+
+ /* 24MHz -> 1066.0MHz */
+ priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out",
+ "osc", 0, 533, 12);
+ if (IS_ERR(priv->pll[1]))
+ return PTR_ERR(priv->pll[1]);
+
+ /* 24MHz -> 1188.0MHz */
+ priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out",
+ "osc", 0, 99, 2);
+ if (IS_ERR(priv->pll[2]))
+ return PTR_ERR(priv->pll[2]);
+
+ for (idx = 0; idx < JH7110_SYSCLK_END; idx++) {
+ u32 max = jh7110_sysclk_data[idx].max;
+ struct clk_parent_data parents[4] = {};
+ struct clk_init_data init = {
+ .name = jh7110_sysclk_data[idx].name,
+ .ops = starfive_jh71x0_clk_ops(max),
+ .parent_data = parents,
+ .num_parents =
+ ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
+ .flags = jh7110_sysclk_data[idx].flags,
+ };
+ struct jh71x0_clk *clk = &priv->reg[idx];
+ unsigned int i;
+
+ for (i = 0; i < init.num_parents; i++) {
+ unsigned int pidx = jh7110_sysclk_data[idx].parents[i];
+
+ if (pidx < JH7110_SYSCLK_END)
+ parents[i].hw = &priv->reg[pidx].hw;
+ else if (pidx == JH7110_SYSCLK_OSC)
+ parents[i].fw_name = "osc";
+ else if (pidx == JH7110_SYSCLK_GMAC1_RMII_REFIN)
+ parents[i].fw_name = "gmac1_rmii_refin";
+ else if (pidx == JH7110_SYSCLK_GMAC1_RGMII_RXIN)
+ parents[i].fw_name = "gmac1_rgmii_rxin";
+ else if (pidx == JH7110_SYSCLK_I2STX_BCLK_EXT)
+ parents[i].fw_name = "i2stx_bclk_ext";
+ else if (pidx == JH7110_SYSCLK_I2STX_LRCK_EXT)
+ parents[i].fw_name = "i2stx_lrck_ext";
+ else if (pidx == JH7110_SYSCLK_I2SRX_BCLK_EXT)
+ parents[i].fw_name = "i2srx_bclk_ext";
+ else if (pidx == JH7110_SYSCLK_I2SRX_LRCK_EXT)
+ parents[i].fw_name = "i2srx_lrck_ext";
+ else if (pidx == JH7110_SYSCLK_TDM_EXT)
+ parents[i].fw_name = "tdm_ext";
+ else if (pidx == JH7110_SYSCLK_MCLK_EXT)
+ parents[i].fw_name = "mclk_ext";
+ else if (pidx >= JH7110_SYSCLK_PLL0_OUT &&
+ pidx <= JH7110_SYSCLK_PLL2_OUT)
+ parents[i].hw = priv->pll[pidx - JH7110_SYSCLK_PLL0_OUT];
+ }
+
+ clk->hw.init = &init;
+ clk->idx = idx;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+ ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_sysclk_get, priv);
+ if (ret)
+ return ret;
+
+ return jh7110_reset_controller_register(priv, "reset-sys", 0);
+}
+
+static const struct of_device_id jh7110_syscrg_match[] = {
+ { .compatible = "starfive,jh7110-syscrg" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver jh7110_syscrg_driver = {
+ .driver = {
+ .name = "clk-starfive-jh7110-sys",
+ .of_match_table = jh7110_syscrg_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver_probe(jh7110_syscrg_driver, jh7110_syscrg_probe);
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index b372083d11c3..a8c60630ae73 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -5,6 +5,7 @@
* Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk>
*/
+#include <linux/auxiliary_bus.h>
#include <linux/clk-provider.h>
#include <linux/debugfs.h>
#include <linux/device.h>
@@ -331,3 +332,52 @@ const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
return &jh71x0_clk_inv_ops;
}
EXPORT_SYMBOL_GPL(starfive_jh71x0_clk_ops);
+
+#if IS_ENABLED(CONFIG_CLK_STARFIVE_JH7110_SYS)
+
+static void jh7110_reset_unregister_adev(void *_adev)
+{
+ struct auxiliary_device *adev = _adev;
+
+ auxiliary_device_delete(adev);
+}
+
+static void jh7110_reset_adev_release(struct device *dev)
+{
+ struct auxiliary_device *adev = to_auxiliary_dev(dev);
+
+ auxiliary_device_uninit(adev);
+}
+
+int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
+ const char *adev_name,
+ u32 adev_id)
+{
+ struct auxiliary_device *adev;
+ int ret;
+
+ adev = devm_kzalloc(priv->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->name = adev_name;
+ adev->dev.parent = priv->dev;
+ adev->dev.release = jh7110_reset_adev_release;
+ adev->id = adev_id;
+
+ ret = auxiliary_device_init(adev);
+ if (ret)
+ return ret;
+
+ ret = auxiliary_device_add(adev);
+ if (ret) {
+ auxiliary_device_uninit(adev);
+ return ret;
+ }
+
+ return devm_add_action_or_reset(priv->dev,
+ jh7110_reset_unregister_adev, adev);
+}
+EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);
+
+#endif
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index baf4b5cb4b8a..0cbf9d94257a 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -111,4 +111,12 @@ struct jh71x0_clk_priv {
const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
+#if IS_ENABLED(CONFIG_CLK_STARFIVE_JH7110_SYS)
+
+int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
+ const char *adev_name,
+ u32 adev_id);
+
+#endif
+
#endif
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 14/21] clk: starfive: Add StarFive JH7110 always-on clock driver
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (12 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 13/21] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 15/21] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
` (6 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "reset-aon".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/clk/starfive/Kconfig | 11 ++
drivers/clk/starfive/Makefile | 1 +
.../clk/starfive/clk-starfive-jh7110-aon.c | 156 ++++++++++++++++++
3 files changed, 168 insertions(+)
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 670c5084aeb8..71c1148ee5f6 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -31,3 +31,14 @@ config CLK_STARFIVE_JH7110_SYS
help
Say yes here to support the system clock controller on the
StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JH7110_AON
+ tristate "StarFive JH7110 always-on clock support"
+ depends on CLK_STARFIVE_JH7110_SYS
+ select AUXILIARY_BUS
+ select CLK_STARFIVE_JH71X0
+ select RESET_STARFIVE_JH7110
+ default m if ARCH_STARFIVE
+ help
+ Say yes here to support the always-on clock controller on the
+ StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 5ca4e887fb9c..f3df7d957b1e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS) += clk-starfive-jh7110-sys.o
+obj-$(CONFIG_CLK_STARFIVE_JH7110_AON) += clk-starfive-jh7110-aon.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
new file mode 100644
index 000000000000..941f1189fe5d
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 Always-On Clock Driver
+ *
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+#include "clk-starfive-jh71x0.h"
+
+/* external clocks */
+#define JH7110_AONCLK_OSC (JH7110_AONCLK_END + 0)
+#define JH7110_AONCLK_GMAC0_RMII_REFIN (JH7110_AONCLK_END + 1)
+#define JH7110_AONCLK_GMAC0_RGMII_RXIN (JH7110_AONCLK_END + 2)
+#define JH7110_AONCLK_STG_AXIAHB (JH7110_AONCLK_END + 3)
+#define JH7110_AONCLK_APB_BUS (JH7110_AONCLK_END + 4)
+#define JH7110_AONCLK_GMAC0_GTXCLK (JH7110_AONCLK_END + 5)
+#define JH7110_AONCLK_RTC_OSC (JH7110_AONCLK_END + 6)
+
+static const struct jh71x0_clk_data jh7110_aonclk_data[] = {
+ /* source */
+ JH71X0__DIV(JH7110_AONCLK_OSC_DIV4, "osc_div4", 4, JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "apb_func", 2,
+ JH7110_AONCLK_OSC_DIV4,
+ JH7110_AONCLK_OSC),
+ /* gmac0 */
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AHB, "gmac0_ahb", 0, JH7110_AONCLK_STG_AXIAHB),
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AXI, "gmac0_axi", 0, JH7110_AONCLK_STG_AXIAHB),
+ JH71X0__DIV(JH7110_AONCLK_GMAC0_RMII_RTX, "gmac0_rmii_rtx", 30,
+ JH7110_AONCLK_GMAC0_RMII_REFIN),
+ JH71X0_GMUX(JH7110_AONCLK_GMAC0_TX, "gmac0_tx", CLK_SET_RATE_PARENT, 2,
+ JH7110_AONCLK_GMAC0_GTXCLK,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_TX_INV, "gmac0_tx_inv", JH7110_AONCLK_GMAC0_TX),
+ JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 2,
+ JH7110_AONCLK_GMAC0_RGMII_RXIN,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_RX_INV, "gmac0_rx_inv", JH7110_AONCLK_GMAC0_RX),
+ /* otpc */
+ JH71X0_GATE(JH7110_AONCLK_OTPC_APB, "otpc_apb", 0, JH7110_AONCLK_APB_BUS),
+ /* rtc */
+ JH71X0_GATE(JH7110_AONCLK_RTC_APB, "rtc_apb", 0, JH7110_AONCLK_APB_BUS),
+ JH71X0__DIV(JH7110_AONCLK_RTC_INTERNAL, "rtc_internal", 1022, JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 2,
+ JH7110_AONCLK_RTC_OSC,
+ JH7110_AONCLK_RTC_INTERNAL),
+ JH71X0_GATE(JH7110_AONCLK_RTC_CAL, "rtc_cal", 0, JH7110_AONCLK_OSC),
+};
+
+static struct clk_hw *jh7110_aonclk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct jh71x0_clk_priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx < JH7110_AONCLK_END)
+ return &priv->reg[idx].hw;
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int jh7110_aoncrg_probe(struct platform_device *pdev)
+{
+ struct jh71x0_clk_priv *priv;
+ unsigned int idx;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev,
+ struct_size(priv, reg, JH7110_AONCLK_END),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->rmw_lock);
+ priv->dev = &pdev->dev;
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ dev_set_drvdata(priv->dev, (void *)(&priv->base));
+
+ for (idx = 0; idx < JH7110_AONCLK_END; idx++) {
+ u32 max = jh7110_aonclk_data[idx].max;
+ struct clk_parent_data parents[4] = {};
+ struct clk_init_data init = {
+ .name = jh7110_aonclk_data[idx].name,
+ .ops = starfive_jh71x0_clk_ops(max),
+ .parent_data = parents,
+ .num_parents =
+ ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
+ .flags = jh7110_aonclk_data[idx].flags,
+ };
+ struct jh71x0_clk *clk = &priv->reg[idx];
+ unsigned int i;
+
+ for (i = 0; i < init.num_parents; i++) {
+ unsigned int pidx = jh7110_aonclk_data[idx].parents[i];
+
+ if (pidx < JH7110_AONCLK_END)
+ parents[i].hw = &priv->reg[pidx].hw;
+ else if (pidx == JH7110_AONCLK_OSC)
+ parents[i].fw_name = "osc";
+ else if (pidx == JH7110_AONCLK_GMAC0_RMII_REFIN)
+ parents[i].fw_name = "gmac0_rmii_refin";
+ else if (pidx == JH7110_AONCLK_GMAC0_RGMII_RXIN)
+ parents[i].fw_name = "gmac0_rgmii_rxin";
+ else if (pidx == JH7110_AONCLK_STG_AXIAHB)
+ parents[i].fw_name = "stg_axiahb";
+ else if (pidx == JH7110_AONCLK_APB_BUS)
+ parents[i].fw_name = "apb_bus";
+ else if (pidx == JH7110_AONCLK_GMAC0_GTXCLK)
+ parents[i].fw_name = "gmac0_gtxclk";
+ else if (pidx == JH7110_AONCLK_RTC_OSC)
+ parents[i].fw_name = "rtc_osc";
+ }
+
+ clk->hw.init = &init;
+ clk->idx = idx;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+ ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_aonclk_get, priv);
+ if (ret)
+ return ret;
+
+ return jh7110_reset_controller_register(priv, "reset-aon", 1);
+}
+
+static const struct of_device_id jh7110_aoncrg_match[] = {
+ { .compatible = "starfive,jh7110-aoncrg" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_aoncrg_match);
+
+static struct platform_driver jh7110_aoncrg_driver = {
+ .probe = jh7110_aoncrg_probe,
+ .driver = {
+ .name = "clk-starfive-jh7110-aon",
+ .of_match_table = jh7110_aoncrg_match,
+ },
+};
+module_platform_driver(jh7110_aoncrg_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7110 always-on clock driver");
+MODULE_LICENSE("GPL");
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 15/21] reset: starfive: Add StarFive JH7110 reset driver
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (13 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 14/21] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 16/21] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
` (5 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
Add auxiliary driver to support StarFive JH7110 system
and always-on resets.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/reset/starfive/Kconfig | 8 +++
drivers/reset/starfive/Makefile | 1 +
.../reset/starfive/reset-starfive-jh7110.c | 70 +++++++++++++++++++
3 files changed, 79 insertions(+)
create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index 1927a5a3b53a..1fa706a2c3dc 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -10,3 +10,11 @@ config RESET_STARFIVE_JH7100
default ARCH_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+
+config RESET_STARFIVE_JH7110
+ bool "StarFive JH7110 Reset Driver"
+ depends on AUXILIARY_BUS && CLK_STARFIVE_JH7110_SYS
+ select RESET_STARFIVE_JH71X0
+ default ARCH_STARFIVE
+ help
+ This enables the reset controller driver for the StarFive JH7110 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index f6aa12466fad..7a44b66fb9d5 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_STARFIVE_JH7110) += reset-starfive-jh7110.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
new file mode 100644
index 000000000000..4ccb3f72ca83
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/auxiliary_bus.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+struct jh7110_reset_info {
+ unsigned int nr_resets;
+ unsigned int assert_offset;
+ unsigned int status_offset;
+};
+
+static const struct jh7110_reset_info jh7110_sys_info = {
+ .nr_resets = JH7110_SYSRST_END,
+ .assert_offset = 0x2F8,
+ .status_offset = 0x308,
+};
+
+static const struct jh7110_reset_info jh7110_aon_info = {
+ .nr_resets = JH7110_AONRST_END,
+ .assert_offset = 0x38,
+ .status_offset = 0x3C,
+};
+
+static int jh7110_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct jh7110_reset_info *info = (struct jh7110_reset_info *)(id->driver_data);
+ void __iomem **base = (void __iomem **)dev_get_drvdata(adev->dev.parent);
+
+ if (!info || !base)
+ return -ENODEV;
+
+ return reset_starfive_jh71x0_register(&adev->dev, adev->dev.parent->of_node,
+ *base + info->assert_offset,
+ *base + info->status_offset,
+ NULL,
+ info->nr_resets,
+ NULL);
+}
+
+static const struct auxiliary_device_id jh7110_reset_ids[] = {
+ {
+ .name = "clk_starfive_jh71x0.reset-sys",
+ .driver_data = (kernel_ulong_t)&jh7110_sys_info,
+ },
+ {
+ .name = "clk_starfive_jh71x0.reset-aon",
+ .driver_data = (kernel_ulong_t)&jh7110_aon_info,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids);
+
+static struct auxiliary_driver jh7110_reset_driver = {
+ .probe = jh7110_reset_probe,
+ .id_table = jh7110_reset_ids,
+};
+module_auxiliary_driver(jh7110_reset_driver);
+
+MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 reset driver");
+MODULE_LICENSE("GPL");
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 16/21] dt-bindings: timer: Add StarFive JH7110 clint
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (14 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 15/21] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 17/21] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
` (4 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add compatible string for the StarFive JH7110 clint.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index aada6957216c..94bef9424df1 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -31,6 +31,7 @@ properties:
- enum:
- sifive,fu540-c000-clint
- starfive,jh7100-clint
+ - starfive,jh7110-clint
- canaan,k210-clint
- const: sifive,clint0
- items:
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 17/21] dt-bindings: interrupt-controller: Add StarFive JH7110 plic
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (15 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 16/21] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 18/21] dt-bindings: riscv: Add SiFive S7 compatible Hal Feng
` (3 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add compatible string for StarFive JH7110 plic.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
.../bindings/interrupt-controller/sifive,plic-1.0.0.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 63bc89e13480..4e98261f2948 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -59,6 +59,7 @@ properties:
- enum:
- sifive,fu540-c000-plic
- starfive,jh7100-plic
+ - starfive,jh7110-plic
- canaan,k210-plic
- const: sifive,plic-1.0.0
- items:
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 18/21] dt-bindings: riscv: Add SiFive S7 compatible
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (16 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 17/21] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
` (2 subsequent siblings)
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
Add a new compatible string in cpu.yaml for SiFive S7 CPU
core which is used on SiFive U74-MC core complex etc.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 001931d526ec..14b5b7ea0ce0 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -35,6 +35,7 @@ properties:
- sifive,e7
- sifive,e71
- sifive,rocket0
+ - sifive,s7
- sifive,u5
- sifive,u54
- sifive,u7
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (17 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 18/21] dt-bindings: riscv: Add SiFive S7 compatible Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 20/21] riscv: dts: starfive: Add StarFive JH7110 pin function definitions Hal Feng
2023-03-11 9:07 ` [PATCH v5 21/21] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Hal Feng
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++
1 file changed, 509 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..d484ecdf93f7
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ S7_0: cpu@0 {
+ compatible = "sifive,s7", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac_zba_zbb";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_1: cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_2: cpu@2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_3: cpu@3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_4: cpu@4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&S7_0>;
+ };
+
+ core1 {
+ cpu = <&U74_1>;
+ };
+
+ core2 {
+ cpu = <&U74_2>;
+ };
+
+ core3 {
+ cpu = <&U74_3>;
+ };
+
+ core4 {
+ cpu = <&U74_4>;
+ };
+ };
+ };
+ };
+
+ gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rmii_refin: gmac1-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ i2srx_bclk_ext: i2srx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2srx_lrck_ext: i2srx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_bclk_ext: i2stx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_lrck_ext: i2stx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ mclk_ext: mclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "mclk_ext";
+ #clock-cells = <0>;
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc";
+ #clock-cells = <0>;
+ };
+
+ rtc_osc: rtc-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "rtc_osc";
+ #clock-cells = <0>;
+ };
+
+ tdm_ext: tdm-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "tdm_ext";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: timer@2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ plic: interrupt-controller@c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ uart0: serial@10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@10030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+ interrupts = <35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+ interrupts = <36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+ interrupts = <37>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial@12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@12030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+ interrupts = <48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@12040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+ interrupts = <49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@12050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+ interrupts = <50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@12060000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12060000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ syscrg: clock-controller@13020000 {
+ compatible = "starfive,jh7110-syscrg";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sysgpio: pinctrl@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+ resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+ interrupts = <86>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ aoncrg: clock-controller@17000000 {
+ compatible = "starfive,jh7110-aoncrg";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac0_rmii_refin>,
+ <&gmac0_rgmii_rxin>,
+ <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg JH7110_SYSCLK_APB_BUS>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+ <&rtc_osc>;
+ clock-names = "osc", "gmac0_rmii_refin",
+ "gmac0_rgmii_rxin", "stg_axiahb",
+ "apb_bus", "gmac0_gtxclk",
+ "rtc_osc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ aongpio: pinctrl@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ resets = <&aoncrg JH7110_AONRST_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 20/21] riscv: dts: starfive: Add StarFive JH7110 pin function definitions
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (18 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 21/21] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Hal Feng
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Jianlong Huang <jianlong.huang@starfivetech.com>
Add pin function definitions for StarFive JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 308 ++++++++++++++++++
1 file changed, 308 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
new file mode 100644
index 000000000000..fb0139b56723
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __JH7110_PINFUNC_H__
+#define __JH7110_PINFUNC_H__
+
+/*
+ * mux bits:
+ * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 |
+ * | din | dout | doen | function | gpio nr |
+ *
+ * dout: output signal
+ * doen: output enable signal
+ * din: optional input signal, 0xff = none
+ * function: function selector
+ * gpio nr: gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+ (((din) & 0xff) << 24) | \
+ (((dout) & 0xff) << 16) | \
+ (((doen) & 0x3f) << 10) | \
+ ((n) & 0x3f))
+
+#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff))
+
+/* sys_iomux dout */
+#define GPOUT_LOW 0
+#define GPOUT_HIGH 1
+#define GPOUT_SYS_WAVE511_UART_TX 2
+#define GPOUT_SYS_CAN0_STBY 3
+#define GPOUT_SYS_CAN0_TST_NEXT_BIT 4
+#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT 5
+#define GPOUT_SYS_CAN0_TXD 6
+#define GPOUT_SYS_USB_DRIVE_VBUS 7
+#define GPOUT_SYS_QSPI_CS1 8
+#define GPOUT_SYS_SPDIF 9
+#define GPOUT_SYS_HDMI_CEC_SDA 10
+#define GPOUT_SYS_HDMI_DDC_SCL 11
+#define GPOUT_SYS_HDMI_DDC_SDA 12
+#define GPOUT_SYS_WATCHDOG 13
+#define GPOUT_SYS_I2C0_CLK 14
+#define GPOUT_SYS_I2C0_DATA 15
+#define GPOUT_SYS_SDIO0_BACK_END_POWER 16
+#define GPOUT_SYS_SDIO0_CARD_POWER_EN 17
+#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN 18
+#define GPOUT_SYS_SDIO0_RST 19
+#define GPOUT_SYS_UART0_TX 20
+#define GPOUT_SYS_HIFI4_JTAG_TDO 21
+#define GPOUT_SYS_JTAG_TDO 22
+#define GPOUT_SYS_PDM_MCLK 23
+#define GPOUT_SYS_PWM_CHANNEL0 24
+#define GPOUT_SYS_PWM_CHANNEL1 25
+#define GPOUT_SYS_PWM_CHANNEL2 26
+#define GPOUT_SYS_PWM_CHANNEL3 27
+#define GPOUT_SYS_PWMDAC_LEFT 28
+#define GPOUT_SYS_PWMDAC_RIGHT 29
+#define GPOUT_SYS_SPI0_CLK 30
+#define GPOUT_SYS_SPI0_FSS 31
+#define GPOUT_SYS_SPI0_TXD 32
+#define GPOUT_SYS_GMAC_PHYCLK 33
+#define GPOUT_SYS_I2SRX_BCLK 34
+#define GPOUT_SYS_I2SRX_LRCK 35
+#define GPOUT_SYS_I2STX0_BCLK 36
+#define GPOUT_SYS_I2STX0_LRCK 37
+#define GPOUT_SYS_MCLK 38
+#define GPOUT_SYS_TDM_CLK 39
+#define GPOUT_SYS_TDM_SYNC 40
+#define GPOUT_SYS_TDM_TXD 41
+#define GPOUT_SYS_TRACE_DATA0 42
+#define GPOUT_SYS_TRACE_DATA1 43
+#define GPOUT_SYS_TRACE_DATA2 44
+#define GPOUT_SYS_TRACE_DATA3 45
+#define GPOUT_SYS_TRACE_REF 46
+#define GPOUT_SYS_CAN1_STBY 47
+#define GPOUT_SYS_CAN1_TST_NEXT_BIT 48
+#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT 49
+#define GPOUT_SYS_CAN1_TXD 50
+#define GPOUT_SYS_I2C1_CLK 51
+#define GPOUT_SYS_I2C1_DATA 52
+#define GPOUT_SYS_SDIO1_BACK_END_POWER 53
+#define GPOUT_SYS_SDIO1_CARD_POWER_EN 54
+#define GPOUT_SYS_SDIO1_CLK 55
+#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN 56
+#define GPOUT_SYS_SDIO1_CMD 57
+#define GPOUT_SYS_SDIO1_DATA0 58
+#define GPOUT_SYS_SDIO1_DATA1 59
+#define GPOUT_SYS_SDIO1_DATA2 60
+#define GPOUT_SYS_SDIO1_DATA3 61
+#define GPOUT_SYS_SDIO1_DATA4 63
+#define GPOUT_SYS_SDIO1_DATA5 63
+#define GPOUT_SYS_SDIO1_DATA6 64
+#define GPOUT_SYS_SDIO1_DATA7 65
+#define GPOUT_SYS_SDIO1_RST 66
+#define GPOUT_SYS_UART1_RTS 67
+#define GPOUT_SYS_UART1_TX 68
+#define GPOUT_SYS_I2STX1_SDO0 69
+#define GPOUT_SYS_I2STX1_SDO1 70
+#define GPOUT_SYS_I2STX1_SDO2 71
+#define GPOUT_SYS_I2STX1_SDO3 72
+#define GPOUT_SYS_SPI1_CLK 73
+#define GPOUT_SYS_SPI1_FSS 74
+#define GPOUT_SYS_SPI1_TXD 75
+#define GPOUT_SYS_I2C2_CLK 76
+#define GPOUT_SYS_I2C2_DATA 77
+#define GPOUT_SYS_UART2_RTS 78
+#define GPOUT_SYS_UART2_TX 79
+#define GPOUT_SYS_SPI2_CLK 80
+#define GPOUT_SYS_SPI2_FSS 81
+#define GPOUT_SYS_SPI2_TXD 82
+#define GPOUT_SYS_I2C3_CLK 83
+#define GPOUT_SYS_I2C3_DATA 84
+#define GPOUT_SYS_UART3_TX 85
+#define GPOUT_SYS_SPI3_CLK 86
+#define GPOUT_SYS_SPI3_FSS 87
+#define GPOUT_SYS_SPI3_TXD 88
+#define GPOUT_SYS_I2C4_CLK 89
+#define GPOUT_SYS_I2C4_DATA 90
+#define GPOUT_SYS_UART4_RTS 91
+#define GPOUT_SYS_UART4_TX 92
+#define GPOUT_SYS_SPI4_CLK 93
+#define GPOUT_SYS_SPI4_FSS 94
+#define GPOUT_SYS_SPI4_TXD 95
+#define GPOUT_SYS_I2C5_CLK 96
+#define GPOUT_SYS_I2C5_DATA 97
+#define GPOUT_SYS_UART5_RTS 98
+#define GPOUT_SYS_UART5_TX 99
+#define GPOUT_SYS_SPI5_CLK 100
+#define GPOUT_SYS_SPI5_FSS 101
+#define GPOUT_SYS_SPI5_TXD 102
+#define GPOUT_SYS_I2C6_CLK 103
+#define GPOUT_SYS_I2C6_DATA 104
+#define GPOUT_SYS_SPI6_CLK 105
+#define GPOUT_SYS_SPI6_FSS 106
+#define GPOUT_SYS_SPI6_TXD 107
+
+/* aon_iomux dout */
+#define GPOUT_AON_CLK_32K_OUT 2
+#define GPOUT_AON_PTC0_PWM4 3
+#define GPOUT_AON_PTC0_PWM5 4
+#define GPOUT_AON_PTC0_PWM6 5
+#define GPOUT_AON_PTC0_PWM7 6
+#define GPOUT_AON_CLK_GCLK0 7
+#define GPOUT_AON_CLK_GCLK1 8
+#define GPOUT_AON_CLK_GCLK2 9
+
+/* sys_iomux doen */
+#define GPOEN_ENABLE 0
+#define GPOEN_DISABLE 1
+#define GPOEN_SYS_HDMI_CEC_SDA 2
+#define GPOEN_SYS_HDMI_DDC_SCL 3
+#define GPOEN_SYS_HDMI_DDC_SDA 4
+#define GPOEN_SYS_I2C0_CLK 5
+#define GPOEN_SYS_I2C0_DATA 6
+#define GPOEN_SYS_HIFI4_JTAG_TDO 7
+#define GPOEN_SYS_JTAG_TDO 8
+#define GPOEN_SYS_PWM0_CHANNEL0 9
+#define GPOEN_SYS_PWM0_CHANNEL1 10
+#define GPOEN_SYS_PWM0_CHANNEL2 11
+#define GPOEN_SYS_PWM0_CHANNEL3 12
+#define GPOEN_SYS_SPI0_NSSPCTL 13
+#define GPOEN_SYS_SPI0_NSSP 14
+#define GPOEN_SYS_TDM_SYNC 15
+#define GPOEN_SYS_TDM_TXD 16
+#define GPOEN_SYS_I2C1_CLK 17
+#define GPOEN_SYS_I2C1_DATA 18
+#define GPOEN_SYS_SDIO1_CMD 19
+#define GPOEN_SYS_SDIO1_DATA0 20
+#define GPOEN_SYS_SDIO1_DATA1 21
+#define GPOEN_SYS_SDIO1_DATA2 22
+#define GPOEN_SYS_SDIO1_DATA3 23
+#define GPOEN_SYS_SDIO1_DATA4 24
+#define GPOEN_SYS_SDIO1_DATA5 25
+#define GPOEN_SYS_SDIO1_DATA6 26
+#define GPOEN_SYS_SDIO1_DATA7 27
+#define GPOEN_SYS_SPI1_NSSPCTL 28
+#define GPOEN_SYS_SPI1_NSSP 29
+#define GPOEN_SYS_I2C2_CLK 30
+#define GPOEN_SYS_I2C2_DATA 31
+#define GPOEN_SYS_SPI2_NSSPCTL 32
+#define GPOEN_SYS_SPI2_NSSP 33
+#define GPOEN_SYS_I2C3_CLK 34
+#define GPOEN_SYS_I2C3_DATA 35
+#define GPOEN_SYS_SPI3_NSSPCTL 36
+#define GPOEN_SYS_SPI3_NSSP 37
+#define GPOEN_SYS_I2C4_CLK 38
+#define GPOEN_SYS_I2C4_DATA 39
+#define GPOEN_SYS_SPI4_NSSPCTL 40
+#define GPOEN_SYS_SPI4_NSSP 41
+#define GPOEN_SYS_I2C5_CLK 42
+#define GPOEN_SYS_I2C5_DATA 43
+#define GPOEN_SYS_SPI5_NSSPCTL 44
+#define GPOEN_SYS_SPI5_NSSP 45
+#define GPOEN_SYS_I2C6_CLK 46
+#define GPOEN_SYS_I2C6_DATA 47
+#define GPOEN_SYS_SPI6_NSSPCTL 48
+#define GPOEN_SYS_SPI6_NSSP 49
+
+/* aon_iomux doen */
+#define GPOEN_AON_PTC0_OE_N_4 2
+#define GPOEN_AON_PTC0_OE_N_5 3
+#define GPOEN_AON_PTC0_OE_N_6 4
+#define GPOEN_AON_PTC0_OE_N_7 5
+
+/* sys_iomux gin */
+#define GPI_NONE 255
+
+#define GPI_SYS_WAVE511_UART_RX 0
+#define GPI_SYS_CAN0_RXD 1
+#define GPI_SYS_USB_OVERCURRENT 2
+#define GPI_SYS_SPDIF 3
+#define GPI_SYS_JTAG_RST 4
+#define GPI_SYS_HDMI_CEC_SDA 5
+#define GPI_SYS_HDMI_DDC_SCL 6
+#define GPI_SYS_HDMI_DDC_SDA 7
+#define GPI_SYS_HDMI_HPD 8
+#define GPI_SYS_I2C0_CLK 9
+#define GPI_SYS_I2C0_DATA 10
+#define GPI_SYS_SDIO0_CD 11
+#define GPI_SYS_SDIO0_INT 12
+#define GPI_SYS_SDIO0_WP 13
+#define GPI_SYS_UART0_RX 14
+#define GPI_SYS_HIFI4_JTAG_TCK 15
+#define GPI_SYS_HIFI4_JTAG_TDI 16
+#define GPI_SYS_HIFI4_JTAG_TMS 17
+#define GPI_SYS_HIFI4_JTAG_RST 18
+#define GPI_SYS_JTAG_TDI 19
+#define GPI_SYS_JTAG_TMS 20
+#define GPI_SYS_PDM_DMIC0 21
+#define GPI_SYS_PDM_DMIC1 22
+#define GPI_SYS_I2SRX_SDIN0 23
+#define GPI_SYS_I2SRX_SDIN1 24
+#define GPI_SYS_I2SRX_SDIN2 25
+#define GPI_SYS_SPI0_CLK 26
+#define GPI_SYS_SPI0_FSS 27
+#define GPI_SYS_SPI0_RXD 28
+#define GPI_SYS_JTAG_TCK 29
+#define GPI_SYS_MCLK_EXT 30
+#define GPI_SYS_I2SRX_BCLK 31
+#define GPI_SYS_I2SRX_LRCK 32
+#define GPI_SYS_I2STX0_BCLK 33
+#define GPI_SYS_I2STX0_LRCK 34
+#define GPI_SYS_TDM_CLK 35
+#define GPI_SYS_TDM_RXD 36
+#define GPI_SYS_TDM_SYNC 37
+#define GPI_SYS_CAN1_RXD 38
+#define GPI_SYS_I2C1_CLK 39
+#define GPI_SYS_I2C1_DATA 40
+#define GPI_SYS_SDIO1_CD 41
+#define GPI_SYS_SDIO1_INT 42
+#define GPI_SYS_SDIO1_WP 43
+#define GPI_SYS_SDIO1_CMD 44
+#define GPI_SYS_SDIO1_DATA0 45
+#define GPI_SYS_SDIO1_DATA1 46
+#define GPI_SYS_SDIO1_DATA2 47
+#define GPI_SYS_SDIO1_DATA3 48
+#define GPI_SYS_SDIO1_DATA4 49
+#define GPI_SYS_SDIO1_DATA5 50
+#define GPI_SYS_SDIO1_DATA6 51
+#define GPI_SYS_SDIO1_DATA7 52
+#define GPI_SYS_SDIO1_STRB 53
+#define GPI_SYS_UART1_CTS 54
+#define GPI_SYS_UART1_RX 55
+#define GPI_SYS_SPI1_CLK 56
+#define GPI_SYS_SPI1_FSS 57
+#define GPI_SYS_SPI1_RXD 58
+#define GPI_SYS_I2C2_CLK 59
+#define GPI_SYS_I2C2_DATA 60
+#define GPI_SYS_UART2_CTS 61
+#define GPI_SYS_UART2_RX 62
+#define GPI_SYS_SPI2_CLK 63
+#define GPI_SYS_SPI2_FSS 64
+#define GPI_SYS_SPI2_RXD 65
+#define GPI_SYS_I2C3_CLK 66
+#define GPI_SYS_I2C3_DATA 67
+#define GPI_SYS_UART3_RX 68
+#define GPI_SYS_SPI3_CLK 69
+#define GPI_SYS_SPI3_FSS 70
+#define GPI_SYS_SPI3_RXD 71
+#define GPI_SYS_I2C4_CLK 72
+#define GPI_SYS_I2C4_DATA 73
+#define GPI_SYS_UART4_CTS 74
+#define GPI_SYS_UART4_RX 75
+#define GPI_SYS_SPI4_CLK 76
+#define GPI_SYS_SPI4_FSS 77
+#define GPI_SYS_SPI4_RXD 78
+#define GPI_SYS_I2C5_CLK 79
+#define GPI_SYS_I2C5_DATA 80
+#define GPI_SYS_UART5_CTS 81
+#define GPI_SYS_UART5_RX 82
+#define GPI_SYS_SPI5_CLK 83
+#define GPI_SYS_SPI5_FSS 84
+#define GPI_SYS_SPI5_RXD 85
+#define GPI_SYS_I2C6_CLK 86
+#define GPI_SYS_I2C6_DATA 87
+#define GPI_SYS_SPI6_CLK 88
+#define GPI_SYS_SPI6_FSS 89
+#define GPI_SYS_SPI6_RXD 90
+
+/* aon_iomux gin */
+#define GPI_AON_PMU_GPIO_WAKEUP_0 0
+#define GPI_AON_PMU_GPIO_WAKEUP_1 1
+#define GPI_AON_PMU_GPIO_WAKEUP_2 2
+#define GPI_AON_PMU_GPIO_WAKEUP_3 3
+
+#endif
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v5 21/21] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
` (19 preceding siblings ...)
2023-03-11 9:07 ` [PATCH v5 20/21] riscv: dts: starfive: Add StarFive JH7110 pin function definitions Hal Feng
@ 2023-03-11 9:07 ` Hal Feng
20 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-11 9:07 UTC (permalink / raw)
To: linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, Hal Feng, linux-kernel
From: Emil Renner Berthing <kernel@esmil.dk>
Add a minimal device tree for StarFive JH7110 VisionFive 2 board
which has version A and version B. Support booting and basic
clock/reset/pinctrl/uart drivers.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 6 +-
.../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++
.../jh7110-starfive-visionfive-2-v1.3b.dts | 13 ++
.../jh7110-starfive-visionfive-2.dtsi | 215 ++++++++++++++++++
4 files changed, 246 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 7b00a48580ca..170956846d49 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,2 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
new file mode 100644
index 000000000000..4af3300f3cf3
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 v1.2A";
+ compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
new file mode 100644
index 000000000000..9230cc3d8946
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 v1.3B";
+ compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
new file mode 100644
index 000000000000..2a6d81609284
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <4000000>;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x1 0x0>;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+ priority = <224>;
+ };
+};
+
+&gmac0_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&i2srx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&mclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+ clock-frequency = <32768>;
+};
+
+&tdm_ext {
+ clock-frequency = <49152000>;
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ status = "okay";
+};
+
+&i2c6 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ status = "okay";
+};
+
+&sysgpio {
+ i2c0_pins: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(57, GPOUT_LOW,
+ GPOEN_SYS_I2C0_CLK,
+ GPI_SYS_I2C0_CLK)>,
+ <GPIOMUX(58, GPOUT_LOW,
+ GPOEN_SYS_I2C0_DATA,
+ GPI_SYS_I2C0_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_SYS_I2C2_CLK,
+ GPI_SYS_I2C2_CLK)>,
+ <GPIOMUX(2, GPOUT_LOW,
+ GPOEN_SYS_I2C2_DATA,
+ GPI_SYS_I2C2_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c5_pins: i2c5-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(19, GPOUT_LOW,
+ GPOEN_SYS_I2C5_CLK,
+ GPI_SYS_I2C5_CLK)>,
+ <GPIOMUX(20, GPOUT_LOW,
+ GPOEN_SYS_I2C5_DATA,
+ GPI_SYS_I2C5_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c6_pins: i2c6-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(16, GPOUT_LOW,
+ GPOEN_SYS_I2C6_CLK,
+ GPI_SYS_I2C6_CLK)>,
+ <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_SYS_I2C6_DATA,
+ GPI_SYS_I2C6_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(6, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART0_RX)>;
+ bias-disable; /* external pull-up */
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 ` [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
@ 2023-03-11 12:56 ` Conor Dooley
0 siblings, 0 replies; 44+ messages in thread
From: Conor Dooley @ 2023-03-11 12:56 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 55 bytes --]
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
@ 2023-03-11 12:56 ` Conor Dooley
2023-03-14 14:34 ` Philipp Zabel
2023-03-20 11:51 ` Emil Renner Berthing
2 siblings, 0 replies; 44+ messages in thread
From: Conor Dooley @ 2023-03-11 12:56 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 55 bytes --]
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-11 9:07 ` [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
@ 2023-03-11 13:11 ` Conor Dooley
2023-03-13 3:22 ` Hal Feng
2023-03-11 14:17 ` Rob Herring
1 sibling, 1 reply; 44+ messages in thread
From: Conor Dooley @ 2023-03-11 13:11 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 2071 bytes --]
On Sat, Mar 11, 2023 at 05:07:23PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add bindings for the system clock and reset generator (SYSCRG) on the
> JH7110 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
> MAINTAINERS | 8 +-
> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
> 4 files changed, 454 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> new file mode 100644
> index 000000000000..84373ae31644
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> + clock-names:
> + oneOf:
> + - items:
> + - const: osc
> + - enum:
> + - gmac1_rmii_refin
> + - gmac1_rgmii_rxin
> + - const: i2stx_bclk_ext
> + - const: i2stx_lrck_ext
> + - const: i2srx_bclk_ext
> + - const: i2srx_lrck_ext
> + - const: tdm_ext
> + - const: mclk_ext
> +
> + - items:
> + - const: osc
> + - const: gmac1_rmii_refin
> + - const: gmac1_rgmii_rxin
> + - const: i2stx_bclk_ext
> + - const: i2stx_lrck_ext
> + - const: i2srx_bclk_ext
> + - const: i2srx_lrck_ext
> + - const: tdm_ext
> + - const: mclk_ext
Assuming nothing else here is optional,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
2023-03-11 9:07 ` [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
@ 2023-03-11 13:14 ` Conor Dooley
2023-03-19 13:28 ` Hal Feng
2023-03-11 14:18 ` Rob Herring
1 sibling, 1 reply; 44+ messages in thread
From: Conor Dooley @ 2023-03-11 13:14 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 2711 bytes --]
On Sat, Mar 11, 2023 at 05:07:24PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add bindings for the always-on clock and reset generator (AONCRG) on the
> JH7110 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 Always-On Clock and Reset Generator
> +
> +maintainers:
> + - Emil Renner Berthing <kernel@esmil.dk>
> +
> +properties:
> + compatible:
> + const: starfive,jh7110-aoncrg
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + oneOf:
> + - items:
> + - description: Main Oscillator (24 MHz)
> + - description: GMAC0 RMII reference or GMAC0 RGMII RX
> + - description: STG AXI/AHB
> + - description: APB Bus
> + - description: GMAC0 GTX
> +
> + - items:
> + - description: Main Oscillator (24 MHz)
> + - description: GMAC0 RMII reference or GMAC0 RGMII RX
> + - description: STG AXI/AHB or GMAC0 RGMII RX
> + - description: APB Bus or STG AXI/AHB
> + - description: GMAC0 GTX or APB Bus
> + - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
Something tells me that the use of "or" means we're not doing this
correctly.
Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
> + - items:
> + - description: Main Oscillator (24 MHz)
> + - description: GMAC0 RMII reference
> + - description: GMAC0 RGMII RX
> + - description: STG AXI/AHB
> + - description: APB Bus
> + - description: GMAC0 GTX
> + - description: RTC Oscillator (32.768 kHz)
> +
> + clock-names:
> + oneOf:
> + - minItems: 5
> + items:
> + - const: osc
> + - enum:
> + - gmac0_rmii_refin
> + - gmac0_rgmii_rxin
> + - const: stg_axiahb
> + - const: apb_bus
> + - const: gmac0_gtxclk
> + - const: rtc_osc
> +
> + - minItems: 6
> + items:
> + - const: osc
> + - const: gmac0_rmii_refin
> + - const: gmac0_rgmii_rxin
> + - const: stg_axiahb
> + - const: apb_bus
> + - const: gmac0_gtxclk
> + - const: rtc_osc
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-11 9:07 ` [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2023-03-11 13:11 ` Conor Dooley
@ 2023-03-11 14:17 ` Rob Herring
2023-03-13 2:47 ` Hal Feng
1 sibling, 1 reply; 44+ messages in thread
From: Rob Herring @ 2023-03-11 14:17 UTC (permalink / raw)
To: Hal Feng
Cc: Marc Zyngier, Krzysztof Kozlowski, Ben Dooks, Philipp Zabel,
Stephen Boyd, linux-riscv, Conor Dooley, Emil Renner Berthing,
Thomas Gleixner, Paul Walmsley, Albert Ou, linux-kernel,
devicetree, Rob Herring, Daniel Lezcano, linux-clk,
Michael Turquette, Palmer Dabbelt
On Sat, 11 Mar 2023 17:07:23 +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add bindings for the system clock and reset generator (SYSCRG) on the
> JH7110 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
> MAINTAINERS | 8 +-
> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
> 4 files changed, 454 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>
Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
Missing tags:
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
2023-03-11 9:07 ` [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2023-03-11 13:14 ` Conor Dooley
@ 2023-03-11 14:18 ` Rob Herring
2023-03-13 2:49 ` Hal Feng
1 sibling, 1 reply; 44+ messages in thread
From: Rob Herring @ 2023-03-11 14:18 UTC (permalink / raw)
To: Hal Feng
Cc: Palmer Dabbelt, devicetree, Albert Ou, Stephen Boyd,
Thomas Gleixner, linux-kernel, Rob Herring, Philipp Zabel,
Conor Dooley, Daniel Lezcano, Krzysztof Kozlowski, Paul Walmsley,
Ben Dooks, Marc Zyngier, linux-riscv, Emil Renner Berthing,
Michael Turquette, linux-clk
On Sat, 11 Mar 2023 17:07:24 +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add bindings for the always-on clock and reset generator (AONCRG) on the
> JH7110 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> .../clock/starfive,jh7110-aoncrg.yaml | 107 ++++++++++++++++++
> .../dt-bindings/clock/starfive,jh7110-crg.h | 18 +++
> .../dt-bindings/reset/starfive,jh7110-crg.h | 12 ++
> 3 files changed, 137 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
>
Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
Missing tags:
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
2023-03-11 9:07 ` [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng
@ 2023-03-12 14:00 ` Conor Dooley
2023-03-13 2:37 ` Hal Feng
0 siblings, 1 reply; 44+ messages in thread
From: Conor Dooley @ 2023-03-12 14:00 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 790 bytes --]
On Sat, Mar 11, 2023 at 05:07:15PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h for making
> the code to be common.
>
> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> .../clk/starfive/{clk-starfive-jh7100.h => clk-starfive-jh71x0.h} | 0
So this patch has broken the build :(
https://patchwork.kernel.org/project/linux-riscv/patch/20230311090733.56918-4-hal.feng@starfivetech.com/
I would imagine it is because you can't rename the header without also
changing the users of the header.
Cheers,
Conor.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
2023-03-12 14:00 ` Conor Dooley
@ 2023-03-13 2:37 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-13 2:37 UTC (permalink / raw)
To: Conor Dooley
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
On Sun, 12 Mar 2023 14:00:23 +0000, Conor Dooley wrote:
> On Sat, Mar 11, 2023 at 05:07:15PM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h for making
>> the code to be common.
>>
>> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../clk/starfive/{clk-starfive-jh7100.h => clk-starfive-jh71x0.h} | 0
>
> So this patch has broken the build :(
> https://patchwork.kernel.org/project/linux-riscv/patch/20230311090733.56918-4-hal.feng@starfivetech.com/
>
> I would imagine it is because you can't rename the header without also
> changing the users of the header.
Will fix it later. Thanks for pointing it out.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-11 14:17 ` Rob Herring
@ 2023-03-13 2:47 ` Hal Feng
2023-03-13 7:51 ` Krzysztof Kozlowski
0 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-13 2:47 UTC (permalink / raw)
To: Rob Herring
Cc: Marc Zyngier, Krzysztof Kozlowski, Ben Dooks, Philipp Zabel,
Stephen Boyd, linux-riscv, Conor Dooley, Emil Renner Berthing,
Thomas Gleixner, Paul Walmsley, Albert Ou, linux-kernel,
devicetree, Rob Herring, Daniel Lezcano, linux-clk,
Michael Turquette, Palmer Dabbelt
On Sat, 11 Mar 2023 08:17:00 -0600, Rob Herring wrote:
> On Sat, 11 Mar 2023 17:07:23 +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Add bindings for the system clock and reset generator (SYSCRG) on the
>> JH7110 RISC-V SoC by StarFive Ltd.
>>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
>> MAINTAINERS | 8 +-
>> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
>> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
>> 4 files changed, 454 insertions(+), 3 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
>> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>>
>
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.
>
> Missing tags:
>
> Reviewed-by: Rob Herring <robh@kernel.org>
This patch has been changed a lot and I am not sure whether it's still
the one you want. So I removed the Reviewed-by tag.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
2023-03-11 14:18 ` Rob Herring
@ 2023-03-13 2:49 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-13 2:49 UTC (permalink / raw)
To: Rob Herring
Cc: Palmer Dabbelt, devicetree, Albert Ou, Stephen Boyd,
Thomas Gleixner, linux-kernel, Rob Herring, Philipp Zabel,
Conor Dooley, Daniel Lezcano, Krzysztof Kozlowski, Paul Walmsley,
Ben Dooks, Marc Zyngier, linux-riscv, Emil Renner Berthing,
Michael Turquette, linux-clk
On Sat, 11 Mar 2023 08:18:03 -0600, Rob Herring wrote:
> On Sat, 11 Mar 2023 17:07:24 +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Add bindings for the always-on clock and reset generator (AONCRG) on the
>> JH7110 RISC-V SoC by StarFive Ltd.
>>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../clock/starfive,jh7110-aoncrg.yaml | 107 ++++++++++++++++++
>> .../dt-bindings/clock/starfive,jh7110-crg.h | 18 +++
>> .../dt-bindings/reset/starfive,jh7110-crg.h | 12 ++
>> 3 files changed, 137 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
>>
>
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.
>
> Missing tags:
>
> Reviewed-by: Rob Herring <robh@kernel.org>
This patch has been changed a lot and I am not sure whether it's still
the one you want. So I removed the Reviewed-by tag.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-11 13:11 ` Conor Dooley
@ 2023-03-13 3:22 ` Hal Feng
2023-03-13 8:53 ` Emil Renner Berthing
0 siblings, 1 reply; 44+ messages in thread
From: Hal Feng @ 2023-03-13 3:22 UTC (permalink / raw)
To: Conor Dooley
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
On Sat, 11 Mar 2023 13:11:38 +0000, Conor Dooley wrote:
> On Sat, Mar 11, 2023 at 05:07:23PM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Add bindings for the system clock and reset generator (SYSCRG) on the
>> JH7110 RISC-V SoC by StarFive Ltd.
>>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
>> MAINTAINERS | 8 +-
>> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
>> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
>> 4 files changed, 454 insertions(+), 3 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
>> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> new file mode 100644
>> index 000000000000..84373ae31644
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>
>> + clock-names:
>> + oneOf:
>> + - items:
>> + - const: osc
>> + - enum:
>> + - gmac1_rmii_refin
>> + - gmac1_rgmii_rxin
>> + - const: i2stx_bclk_ext
>> + - const: i2stx_lrck_ext
>> + - const: i2srx_bclk_ext
>> + - const: i2srx_lrck_ext
>> + - const: tdm_ext
>> + - const: mclk_ext
>> +
>> + - items:
>> + - const: osc
>> + - const: gmac1_rmii_refin
>> + - const: gmac1_rgmii_rxin
>> + - const: i2stx_bclk_ext
>> + - const: i2stx_lrck_ext
>> + - const: i2srx_bclk_ext
>> + - const: i2srx_lrck_ext
>> + - const: tdm_ext
>> + - const: mclk_ext
>
> Assuming nothing else here is optional,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Yeah, nothing else here is optional. Thanks for your review.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-13 2:47 ` Hal Feng
@ 2023-03-13 7:51 ` Krzysztof Kozlowski
2023-03-14 14:18 ` Hal Feng
0 siblings, 1 reply; 44+ messages in thread
From: Krzysztof Kozlowski @ 2023-03-13 7:51 UTC (permalink / raw)
To: Hal Feng, Rob Herring
Cc: Marc Zyngier, Krzysztof Kozlowski, Ben Dooks, Philipp Zabel,
Stephen Boyd, linux-riscv, Conor Dooley, Emil Renner Berthing,
Thomas Gleixner, Paul Walmsley, Albert Ou, linux-kernel,
devicetree, Rob Herring, Daniel Lezcano, linux-clk,
Michael Turquette, Palmer Dabbelt
On 13/03/2023 03:47, Hal Feng wrote:
> On Sat, 11 Mar 2023 08:17:00 -0600, Rob Herring wrote:
>> On Sat, 11 Mar 2023 17:07:23 +0800, Hal Feng wrote:
>>> From: Emil Renner Berthing <kernel@esmil.dk>
>>>
>>> Add bindings for the system clock and reset generator (SYSCRG) on the
>>> JH7110 RISC-V SoC by StarFive Ltd.
>>>
>>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>>> ---
>>> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
>>> MAINTAINERS | 8 +-
>>> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
>>> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
>>> 4 files changed, 454 insertions(+), 3 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>>> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
>>> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>>>
>>
>>
>> Please add Acked-by/Reviewed-by tags when posting new versions. However,
>> there's no need to repost patches *only* to add the tags. The upstream
>> maintainer will do that for acks received on the version they apply.
>>
>> If a tag was not added on purpose, please state why and what changed.
>>
>> Missing tags:
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>
> This patch has been changed a lot and I am not sure whether it's still
> the one you want. So I removed the Reviewed-by tag.
Then mention it in changelog, just like Rob asked:
"If a tag was not added on purpose, please state why and what changed."
I don't see any explanation in the changelog about it.
Best regards,
Krzysztof
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-13 3:22 ` Hal Feng
@ 2023-03-13 8:53 ` Emil Renner Berthing
2023-03-14 14:09 ` Hal Feng
0 siblings, 1 reply; 44+ messages in thread
From: Emil Renner Berthing @ 2023-03-13 8:53 UTC (permalink / raw)
To: Hal Feng
Cc: Conor Dooley, linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
linux-kernel
On Mon, 13 Mar 2023 at 04:22, Hal Feng <hal.feng@starfivetech.com> wrote:
> On Sat, 11 Mar 2023 13:11:38 +0000, Conor Dooley wrote:
> > On Sat, Mar 11, 2023 at 05:07:23PM +0800, Hal Feng wrote:
> >> From: Emil Renner Berthing <kernel@esmil.dk>
> >>
> >> Add bindings for the system clock and reset generator (SYSCRG) on the
> >> JH7110 RISC-V SoC by StarFive Ltd.
> >>
> >> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> >> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> >> ---
> >> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
> >> MAINTAINERS | 8 +-
> >> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
> >> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
> >> 4 files changed, 454 insertions(+), 3 deletions(-)
> >> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> >> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
> >> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
> >>
> >> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> >> new file mode 100644
> >> index 000000000000..84373ae31644
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> >
> >> + clock-names:
> >> + oneOf:
> >> + - items:
> >> + - const: osc
> >> + - enum:
> >> + - gmac1_rmii_refin
> >> + - gmac1_rgmii_rxin
> >> + - const: i2stx_bclk_ext
> >> + - const: i2stx_lrck_ext
> >> + - const: i2srx_bclk_ext
> >> + - const: i2srx_lrck_ext
> >> + - const: tdm_ext
> >> + - const: mclk_ext
> >> +
> >> + - items:
> >> + - const: osc
> >> + - const: gmac1_rmii_refin
> >> + - const: gmac1_rgmii_rxin
> >> + - const: i2stx_bclk_ext
> >> + - const: i2stx_lrck_ext
> >> + - const: i2srx_bclk_ext
> >> + - const: i2srx_lrck_ext
> >> + - const: tdm_ext
> >> + - const: mclk_ext
> >
> > Assuming nothing else here is optional,
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>
> Yeah, nothing else here is optional. Thanks for your review.
Wait, what kind of optional are we talking about here? Surely all the
i2s and tdm external clocks are optional in the sense that you don't
need them on a board that never does any audio processing.
/Emil
>
> Best regards,
> Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-13 8:53 ` Emil Renner Berthing
@ 2023-03-14 14:09 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-14 14:09 UTC (permalink / raw)
To: Emil Renner Berthing
Cc: Conor Dooley, linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
linux-kernel
On Mon, 13 Mar 2023 09:53:01 +0100, Emil Renner Berthing wrote:
> On Mon, 13 Mar 2023 at 04:22, Hal Feng <hal.feng@starfivetech.com> wrote:
>> On Sat, 11 Mar 2023 13:11:38 +0000, Conor Dooley wrote:
>> > On Sat, Mar 11, 2023 at 05:07:23PM +0800, Hal Feng wrote:
>> >> From: Emil Renner Berthing <kernel@esmil.dk>
>> >>
>> >> Add bindings for the system clock and reset generator (SYSCRG) on the
>> >> JH7110 RISC-V SoC by StarFive Ltd.
>> >>
>> >> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> >> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> >> ---
>> >> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
>> >> MAINTAINERS | 8 +-
>> >> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
>> >> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
>> >> 4 files changed, 454 insertions(+), 3 deletions(-)
>> >> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> >> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
>> >> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> >> new file mode 100644
>> >> index 000000000000..84373ae31644
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>> >
>> >> + clock-names:
>> >> + oneOf:
>> >> + - items:
>> >> + - const: osc
>> >> + - enum:
>> >> + - gmac1_rmii_refin
>> >> + - gmac1_rgmii_rxin
>> >> + - const: i2stx_bclk_ext
>> >> + - const: i2stx_lrck_ext
>> >> + - const: i2srx_bclk_ext
>> >> + - const: i2srx_lrck_ext
>> >> + - const: tdm_ext
>> >> + - const: mclk_ext
>> >> +
>> >> + - items:
>> >> + - const: osc
>> >> + - const: gmac1_rmii_refin
>> >> + - const: gmac1_rgmii_rxin
>> >> + - const: i2stx_bclk_ext
>> >> + - const: i2stx_lrck_ext
>> >> + - const: i2srx_bclk_ext
>> >> + - const: i2srx_lrck_ext
>> >> + - const: tdm_ext
>> >> + - const: mclk_ext
>> >
>> > Assuming nothing else here is optional,
>> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>>
>> Yeah, nothing else here is optional. Thanks for your review.
>
> Wait, what kind of optional are we talking about here? Surely all the
> i2s and tdm external clocks are optional in the sense that you don't
> need them on a board that never does any audio processing.
I think the "optional" means whether the clock is optional in the sense
that we run all functions on the SoC.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
2023-03-13 7:51 ` Krzysztof Kozlowski
@ 2023-03-14 14:18 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-14 14:18 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring
Cc: Marc Zyngier, Krzysztof Kozlowski, Ben Dooks, Philipp Zabel,
Stephen Boyd, linux-riscv, Conor Dooley, Emil Renner Berthing,
Thomas Gleixner, Paul Walmsley, Albert Ou, linux-kernel,
devicetree, Rob Herring, Daniel Lezcano, linux-clk,
Michael Turquette, Palmer Dabbelt
On Mon, 13 Mar 2023 08:51:20 +0100, Krzysztof Kozlowski wrote:
> On 13/03/2023 03:47, Hal Feng wrote:
>> On Sat, 11 Mar 2023 08:17:00 -0600, Rob Herring wrote:
>>> On Sat, 11 Mar 2023 17:07:23 +0800, Hal Feng wrote:
>>>> From: Emil Renner Berthing <kernel@esmil.dk>
>>>>
>>>> Add bindings for the system clock and reset generator (SYSCRG) on the
>>>> JH7110 RISC-V SoC by StarFive Ltd.
>>>>
>>>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>>>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>>>> ---
>>>> .../clock/starfive,jh7110-syscrg.yaml | 104 +++++++++
>>>> MAINTAINERS | 8 +-
>>>> .../dt-bindings/clock/starfive,jh7110-crg.h | 203 ++++++++++++++++++
>>>> .../dt-bindings/reset/starfive,jh7110-crg.h | 142 ++++++++++++
>>>> 4 files changed, 454 insertions(+), 3 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
>>>> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
>>>> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>>>>
>>>
>>>
>>> Please add Acked-by/Reviewed-by tags when posting new versions. However,
>>> there's no need to repost patches *only* to add the tags. The upstream
>>> maintainer will do that for acks received on the version they apply.
>>>
>>> If a tag was not added on purpose, please state why and what changed.
>>>
>>> Missing tags:
>>>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>
>> This patch has been changed a lot and I am not sure whether it's still
>> the one you want. So I removed the Reviewed-by tag.
>
> Then mention it in changelog, just like Rob asked:
> "If a tag was not added on purpose, please state why and what changed."
> I don't see any explanation in the changelog about it.
So sorry for missing that. Thank you for your suggestions.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-11 12:56 ` Conor Dooley
@ 2023-03-14 14:34 ` Philipp Zabel
2023-03-20 11:51 ` Emil Renner Berthing
2 siblings, 0 replies; 44+ messages in thread
From: Philipp Zabel @ 2023-03-14 14:34 UTC (permalink / raw)
To: Hal Feng, linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, linux-kernel
On Sa, 2023-03-11 at 17:07 +0800, Hal Feng wrote:
> Using ARCH_FOO symbol is preferred than SOC_FOO.
>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers
2023-03-11 9:07 ` [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers Hal Feng
@ 2023-03-14 14:34 ` Philipp Zabel
2023-03-17 8:17 ` Hal Feng
0 siblings, 1 reply; 44+ messages in thread
From: Philipp Zabel @ 2023-03-14 14:34 UTC (permalink / raw)
To: Hal Feng, linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, linux-kernel
On Sa, 2023-03-11 at 17:07 +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> This moves the StarFive JH7100 reset driver to a new subdirectory in
> preparation for adding more StarFive reset drivers.
>
> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> MAINTAINERS | 2 +-
> drivers/reset/Kconfig | 8 +-------
> drivers/reset/Makefile | 2 +-
> drivers/reset/starfive/Kconfig | 8 ++++++++
> drivers/reset/starfive/Makefile | 2 ++
> drivers/reset/{ => starfive}/reset-starfive-jh7100.c | 0
> 6 files changed, 13 insertions(+), 9 deletions(-)
> create mode 100644 drivers/reset/starfive/Kconfig
> create mode 100644 drivers/reset/starfive/Makefile
> rename drivers/reset/{ => starfive}/reset-starfive-jh7100.c (100%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index caba3b61ad5c..87f210e357ca 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19940,7 +19940,7 @@ STARFIVE JH7100 RESET CONTROLLER DRIVER
> M: Emil Renner Berthing <kernel@esmil.dk>
> S: Maintained
> F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
> -F: drivers/reset/reset-starfive-jh7100.c
> +F: drivers/reset/starfive/reset-starfive-jh7100.c
> F: include/dt-bindings/reset/starfive-jh7100.h
>
>
>
>
> STARFIVE JH71XX PMU CONTROLLER DRIVER
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 6ae5aa46a6b2..6aa8f243b30c 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -232,13 +232,6 @@ config RESET_SOCFPGA
> This enables the reset driver for the SoCFPGA ARMv7 platforms. This
> driver gets initialized early during platform init calls.
>
>
>
>
> -config RESET_STARFIVE_JH7100
> - bool "StarFive JH7100 Reset Driver"
> - depends on ARCH_STARFIVE || COMPILE_TEST
> - default ARCH_STARFIVE
> - help
> - This enables the reset controller driver for the StarFive JH7100 SoC.
> -
> config RESET_SUNPLUS
> bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
> default ARCH_SUNPLUS
> @@ -320,6 +313,7 @@ config RESET_ZYNQ
> help
> This enables the reset controller driver for Xilinx Zynq SoCs.
>
>
>
>
> +source "drivers/reset/starfive/Kconfig"
> source "drivers/reset/sti/Kconfig"
> source "drivers/reset/hisilicon/Kconfig"
> source "drivers/reset/tegra/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 3e7e5fd633a8..719b8f6f84bc 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-y += core.o
> obj-y += hisilicon/
> +obj-$(CONFIG_ARCH_STARFIVE) += starfive/
This should really be obj-y, otherwise this won't compile with
COMPILE_TEST=y but ARCH_STARFIVE=n.
With that fixed,
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code
2023-03-11 9:07 ` [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
@ 2023-03-16 19:05 ` Tommaso Merciai
2023-03-18 4:19 ` Hal Feng
0 siblings, 1 reply; 44+ messages in thread
From: Tommaso Merciai @ 2023-03-16 19:05 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, linux-kernel
Hello Hal,
Patcht itself looks good to me, btw I have some style issue applying
this:
On Sat, Mar 11, 2023 at 05:07:16PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Rename some variables from "jh7100" or "JH7100" to "jh71x0"
> or "JH71X0".
>
> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> .../clk/starfive/clk-starfive-jh7100-audio.c | 74 ++--
> drivers/clk/starfive/clk-starfive-jh7100.c | 388 +++++++++---------
> drivers/clk/starfive/clk-starfive-jh71x0.c | 284 ++++++-------
> drivers/clk/starfive/clk-starfive-jh71x0.h | 72 ++--
> 4 files changed, 409 insertions(+), 409 deletions(-)
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh7100-audio.c b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
> index 8473a65e219b..02aefb7264f8 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7100-audio.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
> @@ -16,7 +16,7 @@
>
> #include <dt-bindings/clock/starfive-jh7100-audio.h>
>
> -#include "clk-starfive-jh7100.h"
> +#include "clk-starfive-jh71x0.h"
>
> /* external clocks */
> #define JH7100_AUDCLK_AUDIO_SRC (JH7100_AUDCLK_END + 0)
> @@ -28,66 +28,66 @@
> #define JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD (JH7100_AUDCLK_END + 6)
> #define JH7100_AUDCLK_VAD_INTMEM (JH7100_AUDCLK_END + 7)
>
> -static const struct jh7100_clk_data jh7100_audclk_data[] = {
> - JH7100__GMD(JH7100_AUDCLK_ADC_MCLK, "adc_mclk", 0, 15, 2,
> +static const struct jh71x0_clk_data jh7100_audclk_data[] = {
> + JH71X0__GMD(JH7100_AUDCLK_ADC_MCLK, "adc_mclk", 0, 15, 2,
> JH7100_AUDCLK_AUDIO_SRC,
> JH7100_AUDCLK_AUDIO_12288),
> - JH7100__GMD(JH7100_AUDCLK_I2S1_MCLK, "i2s1_mclk", 0, 15, 2,
> + JH71X0__GMD(JH7100_AUDCLK_I2S1_MCLK, "i2s1_mclk", 0, 15, 2,
> JH7100_AUDCLK_AUDIO_SRC,
> JH7100_AUDCLK_AUDIO_12288),
> - JH7100_GATE(JH7100_AUDCLK_I2SADC_APB, "i2sadc_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100_MDIV(JH7100_AUDCLK_I2SADC_BCLK, "i2sadc_bclk", 31, 2,
> + JH71X0_GATE(JH7100_AUDCLK_I2SADC_APB, "i2sadc_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0_MDIV(JH7100_AUDCLK_I2SADC_BCLK, "i2sadc_bclk", 31, 2,
> JH7100_AUDCLK_ADC_MCLK,
> JH7100_AUDCLK_I2SADC_BCLK_IOPAD),
> - JH7100__INV(JH7100_AUDCLK_I2SADC_BCLK_N, "i2sadc_bclk_n", JH7100_AUDCLK_I2SADC_BCLK),
> - JH7100_MDIV(JH7100_AUDCLK_I2SADC_LRCLK, "i2sadc_lrclk", 63, 3,
> + JH71X0__INV(JH7100_AUDCLK_I2SADC_BCLK_N, "i2sadc_bclk_n", JH7100_AUDCLK_I2SADC_BCLK),
> + JH71X0_MDIV(JH7100_AUDCLK_I2SADC_LRCLK, "i2sadc_lrclk", 63, 3,
> JH7100_AUDCLK_I2SADC_BCLK_N,
> JH7100_AUDCLK_I2SADC_LRCLK_IOPAD,
> JH7100_AUDCLK_I2SADC_BCLK),
> - JH7100_GATE(JH7100_AUDCLK_PDM_APB, "pdm_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100__GMD(JH7100_AUDCLK_PDM_MCLK, "pdm_mclk", 0, 15, 2,
> + JH71X0_GATE(JH7100_AUDCLK_PDM_APB, "pdm_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0__GMD(JH7100_AUDCLK_PDM_MCLK, "pdm_mclk", 0, 15, 2,
> JH7100_AUDCLK_AUDIO_SRC,
> JH7100_AUDCLK_AUDIO_12288),
> - JH7100_GATE(JH7100_AUDCLK_I2SVAD_APB, "i2svad_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100__GMD(JH7100_AUDCLK_SPDIF, "spdif", 0, 15, 2,
> + JH71X0_GATE(JH7100_AUDCLK_I2SVAD_APB, "i2svad_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0__GMD(JH7100_AUDCLK_SPDIF, "spdif", 0, 15, 2,
> JH7100_AUDCLK_AUDIO_SRC,
> JH7100_AUDCLK_AUDIO_12288),
> - JH7100_GATE(JH7100_AUDCLK_SPDIF_APB, "spdif_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100_GATE(JH7100_AUDCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100__GMD(JH7100_AUDCLK_DAC_MCLK, "dac_mclk", 0, 15, 2,
> + JH71X0_GATE(JH7100_AUDCLK_SPDIF_APB, "spdif_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0_GATE(JH7100_AUDCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0__GMD(JH7100_AUDCLK_DAC_MCLK, "dac_mclk", 0, 15, 2,
> JH7100_AUDCLK_AUDIO_SRC,
> JH7100_AUDCLK_AUDIO_12288),
> - JH7100_GATE(JH7100_AUDCLK_I2SDAC_APB, "i2sdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100_MDIV(JH7100_AUDCLK_I2SDAC_BCLK, "i2sdac_bclk", 31, 2,
> + JH71X0_GATE(JH7100_AUDCLK_I2SDAC_APB, "i2sdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0_MDIV(JH7100_AUDCLK_I2SDAC_BCLK, "i2sdac_bclk", 31, 2,
> JH7100_AUDCLK_DAC_MCLK,
> JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
> - JH7100__INV(JH7100_AUDCLK_I2SDAC_BCLK_N, "i2sdac_bclk_n", JH7100_AUDCLK_I2SDAC_BCLK),
> - JH7100_MDIV(JH7100_AUDCLK_I2SDAC_LRCLK, "i2sdac_lrclk", 31, 2,
> + JH71X0__INV(JH7100_AUDCLK_I2SDAC_BCLK_N, "i2sdac_bclk_n", JH7100_AUDCLK_I2SDAC_BCLK),
> + JH71X0_MDIV(JH7100_AUDCLK_I2SDAC_LRCLK, "i2sdac_lrclk", 31, 2,
> JH7100_AUDCLK_I2S1_MCLK,
> JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
> - JH7100_GATE(JH7100_AUDCLK_I2S1_APB, "i2s1_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100_MDIV(JH7100_AUDCLK_I2S1_BCLK, "i2s1_bclk", 31, 2,
> + JH71X0_GATE(JH7100_AUDCLK_I2S1_APB, "i2s1_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0_MDIV(JH7100_AUDCLK_I2S1_BCLK, "i2s1_bclk", 31, 2,
> JH7100_AUDCLK_I2S1_MCLK,
> JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
> - JH7100__INV(JH7100_AUDCLK_I2S1_BCLK_N, "i2s1_bclk_n", JH7100_AUDCLK_I2S1_BCLK),
> - JH7100_MDIV(JH7100_AUDCLK_I2S1_LRCLK, "i2s1_lrclk", 63, 3,
> + JH71X0__INV(JH7100_AUDCLK_I2S1_BCLK_N, "i2s1_bclk_n", JH7100_AUDCLK_I2S1_BCLK),
> + JH71X0_MDIV(JH7100_AUDCLK_I2S1_LRCLK, "i2s1_lrclk", 63, 3,
> JH7100_AUDCLK_I2S1_BCLK_N,
> JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD),
> - JH7100_GATE(JH7100_AUDCLK_I2SDAC16K_APB, "i2s1dac16k_apb", 0, JH7100_AUDCLK_APB0_BUS),
> - JH7100__DIV(JH7100_AUDCLK_APB0_BUS, "apb0_bus", 8, JH7100_AUDCLK_DOM7AHB_BUS),
> - JH7100_GATE(JH7100_AUDCLK_DMA1P_AHB, "dma1p_ahb", 0, JH7100_AUDCLK_DOM7AHB_BUS),
> - JH7100_GATE(JH7100_AUDCLK_USB_APB, "usb_apb", CLK_IGNORE_UNUSED, JH7100_AUDCLK_APB_EN),
> - JH7100_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB),
> - JH7100_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB),
> - JH7100__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS),
> - JH7100__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2,
> + JH71X0_GATE(JH7100_AUDCLK_I2SDAC16K_APB, "i2s1dac16k_apb", 0, JH7100_AUDCLK_APB0_BUS),
> + JH71X0__DIV(JH7100_AUDCLK_APB0_BUS, "apb0_bus", 8, JH7100_AUDCLK_DOM7AHB_BUS),
> + JH71X0_GATE(JH7100_AUDCLK_DMA1P_AHB, "dma1p_ahb", 0, JH7100_AUDCLK_DOM7AHB_BUS),
> + JH71X0_GATE(JH7100_AUDCLK_USB_APB, "usb_apb", CLK_IGNORE_UNUSED, JH7100_AUDCLK_APB_EN),
> + JH71X0_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB),
> + JH71X0_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB),
> + JH71X0__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS),
> + JH71X0__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2,
> JH7100_AUDCLK_VAD_INTMEM,
> JH7100_AUDCLK_AUDIO_12288),
> };
>
> static struct clk_hw *jh7100_audclk_get(struct of_phandle_args *clkspec, void *data)
> {
> - struct jh7100_clk_priv *priv = data;
> + struct jh71x0_clk_priv *priv = data;
> unsigned int idx = clkspec->args[0];
>
> if (idx < JH7100_AUDCLK_END)
> @@ -98,7 +98,7 @@ static struct clk_hw *jh7100_audclk_get(struct of_phandle_args *clkspec, void *d
>
> static int jh7100_audclk_probe(struct platform_device *pdev)
> {
> - struct jh7100_clk_priv *priv;
> + struct jh71x0_clk_priv *priv;
> unsigned int idx;
> int ret;
>
> @@ -117,12 +117,12 @@ static int jh7100_audclk_probe(struct platform_device *pdev)
> struct clk_parent_data parents[4] = {};
> struct clk_init_data init = {
> .name = jh7100_audclk_data[idx].name,
> - .ops = starfive_jh7100_clk_ops(max),
> + .ops = starfive_jh71x0_clk_ops(max),
> .parent_data = parents,
> - .num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
> + .num_parents = ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
> .flags = jh7100_audclk_data[idx].flags,
> };
> - struct jh7100_clk *clk = &priv->reg[idx];
> + struct jh71x0_clk *clk = &priv->reg[idx];
> unsigned int i;
>
> for (i = 0; i < init.num_parents; i++) {
> @@ -140,7 +140,7 @@ static int jh7100_audclk_probe(struct platform_device *pdev)
>
> clk->hw.init = &init;
> clk->idx = idx;
> - clk->max_div = max & JH7100_CLK_DIV_MASK;
> + clk->max_div = max & JH71X0_CLK_DIV_MASK;
>
> ret = devm_clk_hw_register(priv->dev, &clk->hw);
> if (ret)
> diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
> index eea52f16af0d..bcc9acdd5936 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7100.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7100.c
> @@ -15,7 +15,7 @@
>
> #include <dt-bindings/clock/starfive-jh7100.h>
>
> -#include "clk-starfive-jh7100.h"
> +#include "clk-starfive-jh71x0.h"
>
> /* external clocks */
> #define JH7100_CLK_OSC_SYS (JH7100_CLK_END + 0)
> @@ -23,250 +23,250 @@
> #define JH7100_CLK_GMAC_RMII_REF (JH7100_CLK_END + 2)
> #define JH7100_CLK_GMAC_GR_MII_RX (JH7100_CLK_END + 3)
>
> -static const struct jh7100_clk_data jh7100_clk_data[] __initconst = {
> - JH7100__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4,
> +static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = {
> + JH71X0__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL1_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 3,
> + JH71X0__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 3,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL1_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 4,
> + JH71X0__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 4,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL1_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 3,
> + JH71X0__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 3,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 2,
> + JH71X0__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 2,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL0_OUT),
> - JH7100__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 2,
> + JH71X0__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 2,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 3,
> + JH71X0__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 3,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL1_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 3,
> + JH71X0__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 3,
> JH7100_CLK_OSC_AUD,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100_GDIV(JH7100_CLK_AUDIO_ROOT, "audio_root", 0, 8, JH7100_CLK_PLL0_OUT),
> - JH7100__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 3,
> + JH71X0_GDIV(JH7100_CLK_AUDIO_ROOT, "audio_root", 0, 8, JH7100_CLK_PLL0_OUT),
> + JH71X0__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 3,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL1_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 3,
> + JH71X0__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 3,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL1_OUT),
> - JH7100__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 3,
> + JH71X0__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 3,
> JH7100_CLK_OSC_AUD,
> JH7100_CLK_PLL0_OUT,
> JH7100_CLK_PLL2_OUT),
> - JH7100__DIV(JH7100_CLK_CPUNBUS_ROOT_DIV, "cpunbus_root_div", 2, JH7100_CLK_CPUNDBUS_ROOT),
> - JH7100__DIV(JH7100_CLK_DSP_ROOT_DIV, "dsp_root_div", 4, JH7100_CLK_DSP_ROOT),
> - JH7100__DIV(JH7100_CLK_PERH0_SRC, "perh0_src", 4, JH7100_CLK_PERH0_ROOT),
> - JH7100__DIV(JH7100_CLK_PERH1_SRC, "perh1_src", 4, JH7100_CLK_PERH1_ROOT),
> - JH7100_GDIV(JH7100_CLK_PLL0_TESTOUT, "pll0_testout", 0, 31, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_PLL1_TESTOUT, "pll1_testout", 0, 31, JH7100_CLK_DLA_ROOT),
> - JH7100_GDIV(JH7100_CLK_PLL2_TESTOUT, "pll2_testout", 0, 31, JH7100_CLK_PERH1_SRC),
> - JH7100__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 2,
> + JH71X0__DIV(JH7100_CLK_CPUNBUS_ROOT_DIV, "cpunbus_root_div", 2, JH7100_CLK_CPUNDBUS_ROOT),
> + JH71X0__DIV(JH7100_CLK_DSP_ROOT_DIV, "dsp_root_div", 4, JH7100_CLK_DSP_ROOT),
> + JH71X0__DIV(JH7100_CLK_PERH0_SRC, "perh0_src", 4, JH7100_CLK_PERH0_ROOT),
> + JH71X0__DIV(JH7100_CLK_PERH1_SRC, "perh1_src", 4, JH7100_CLK_PERH1_ROOT),
> + JH71X0_GDIV(JH7100_CLK_PLL0_TESTOUT, "pll0_testout", 0, 31, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_PLL1_TESTOUT, "pll1_testout", 0, 31, JH7100_CLK_DLA_ROOT),
> + JH71X0_GDIV(JH7100_CLK_PLL2_TESTOUT, "pll2_testout", 0, 31, JH7100_CLK_PERH1_SRC),
> + JH71X0__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 2,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_OSC_AUD),
> - JH7100__DIV(JH7100_CLK_CPU_CORE, "cpu_core", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100__DIV(JH7100_CLK_CPU_AXI, "cpu_axi", 8, JH7100_CLK_CPU_CORE),
> - JH7100__DIV(JH7100_CLK_AHB_BUS, "ahb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100__DIV(JH7100_CLK_APB1_BUS, "apb1_bus", 8, JH7100_CLK_AHB_BUS),
> - JH7100__DIV(JH7100_CLK_APB2_BUS, "apb2_bus", 8, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_DOM3AHB_BUS, "dom3ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_DOM7AHB_BUS, "dom7ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_U74_CORE0, "u74_core0", CLK_IS_CRITICAL, JH7100_CLK_CPU_CORE),
> - JH7100_GDIV(JH7100_CLK_U74_CORE1, "u74_core1", CLK_IS_CRITICAL, 8, JH7100_CLK_CPU_CORE),
> - JH7100_GATE(JH7100_CLK_U74_AXI, "u74_axi", CLK_IS_CRITICAL, JH7100_CLK_CPU_AXI),
> - JH7100_GATE(JH7100_CLK_U74RTC_TOGGLE, "u74rtc_toggle", CLK_IS_CRITICAL, JH7100_CLK_OSC_SYS),
> - JH7100_GATE(JH7100_CLK_SGDMA2P_AXI, "sgdma2p_axi", 0, JH7100_CLK_CPU_AXI),
> - JH7100_GATE(JH7100_CLK_DMA2PNOC_AXI, "dma2pnoc_axi", 0, JH7100_CLK_CPU_AXI),
> - JH7100_GATE(JH7100_CLK_SGDMA2P_AHB, "sgdma2p_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100__DIV(JH7100_CLK_DLA_BUS, "dla_bus", 4, JH7100_CLK_DLA_ROOT),
> - JH7100_GATE(JH7100_CLK_DLA_AXI, "dla_axi", 0, JH7100_CLK_DLA_BUS),
> - JH7100_GATE(JH7100_CLK_DLANOC_AXI, "dlanoc_axi", 0, JH7100_CLK_DLA_BUS),
> - JH7100_GATE(JH7100_CLK_DLA_APB, "dla_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_VP6_CORE, "vp6_core", 0, 4, JH7100_CLK_DSP_ROOT_DIV),
> - JH7100__DIV(JH7100_CLK_VP6BUS_SRC, "vp6bus_src", 4, JH7100_CLK_DSP_ROOT),
> - JH7100_GDIV(JH7100_CLK_VP6_AXI, "vp6_axi", 0, 4, JH7100_CLK_VP6BUS_SRC),
> - JH7100__DIV(JH7100_CLK_VCDECBUS_SRC, "vcdecbus_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
> - JH7100__DIV(JH7100_CLK_VDEC_BUS, "vdec_bus", 8, JH7100_CLK_VCDECBUS_SRC),
> - JH7100_GATE(JH7100_CLK_VDEC_AXI, "vdec_axi", 0, JH7100_CLK_VDEC_BUS),
> - JH7100_GATE(JH7100_CLK_VDECBRG_MAIN, "vdecbrg_mainclk", 0, JH7100_CLK_VDEC_BUS),
> - JH7100_GDIV(JH7100_CLK_VDEC_BCLK, "vdec_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
> - JH7100_GDIV(JH7100_CLK_VDEC_CCLK, "vdec_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
> - JH7100_GATE(JH7100_CLK_VDEC_APB, "vdec_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_JPEG_AXI, "jpeg_axi", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100_GDIV(JH7100_CLK_JPEG_CCLK, "jpeg_cclk", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100_GATE(JH7100_CLK_JPEG_APB, "jpeg_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_GC300_2X, "gc300_2x", 0, 8, JH7100_CLK_CDECHIFI4_ROOT),
> - JH7100_GATE(JH7100_CLK_GC300_AHB, "gc300_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100__DIV(JH7100_CLK_JPCGC300_AXIBUS, "jpcgc300_axibus", 8, JH7100_CLK_VCDECBUS_SRC),
> - JH7100_GATE(JH7100_CLK_GC300_AXI, "gc300_axi", 0, JH7100_CLK_JPCGC300_AXIBUS),
> - JH7100_GATE(JH7100_CLK_JPCGC300_MAIN, "jpcgc300_mainclk", 0, JH7100_CLK_JPCGC300_AXIBUS),
> - JH7100__DIV(JH7100_CLK_VENC_BUS, "venc_bus", 8, JH7100_CLK_VCDECBUS_SRC),
> - JH7100_GATE(JH7100_CLK_VENC_AXI, "venc_axi", 0, JH7100_CLK_VENC_BUS),
> - JH7100_GATE(JH7100_CLK_VENCBRG_MAIN, "vencbrg_mainclk", 0, JH7100_CLK_VENC_BUS),
> - JH7100_GDIV(JH7100_CLK_VENC_BCLK, "venc_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
> - JH7100_GDIV(JH7100_CLK_VENC_CCLK, "venc_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
> - JH7100_GATE(JH7100_CLK_VENC_APB, "venc_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_DDRPLL_DIV2, "ddrpll_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_PLL1_OUT),
> - JH7100_GDIV(JH7100_CLK_DDRPLL_DIV4, "ddrpll_div4", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV2),
> - JH7100_GDIV(JH7100_CLK_DDRPLL_DIV8, "ddrpll_div8", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV4),
> - JH7100_GDIV(JH7100_CLK_DDROSC_DIV2, "ddrosc_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_OSC_SYS),
> - JH7100_GMUX(JH7100_CLK_DDRC0, "ddrc0", CLK_IS_CRITICAL, 4,
> + JH71X0__DIV(JH7100_CLK_CPU_CORE, "cpu_core", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0__DIV(JH7100_CLK_CPU_AXI, "cpu_axi", 8, JH7100_CLK_CPU_CORE),
> + JH71X0__DIV(JH7100_CLK_AHB_BUS, "ahb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0__DIV(JH7100_CLK_APB1_BUS, "apb1_bus", 8, JH7100_CLK_AHB_BUS),
> + JH71X0__DIV(JH7100_CLK_APB2_BUS, "apb2_bus", 8, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_DOM3AHB_BUS, "dom3ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_DOM7AHB_BUS, "dom7ahb_bus", CLK_IS_CRITICAL, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_U74_CORE0, "u74_core0", CLK_IS_CRITICAL, JH7100_CLK_CPU_CORE),
> + JH71X0_GDIV(JH7100_CLK_U74_CORE1, "u74_core1", CLK_IS_CRITICAL, 8, JH7100_CLK_CPU_CORE),
> + JH71X0_GATE(JH7100_CLK_U74_AXI, "u74_axi", CLK_IS_CRITICAL, JH7100_CLK_CPU_AXI),
> + JH71X0_GATE(JH7100_CLK_U74RTC_TOGGLE, "u74rtc_toggle", CLK_IS_CRITICAL, JH7100_CLK_OSC_SYS),
> + JH71X0_GATE(JH7100_CLK_SGDMA2P_AXI, "sgdma2p_axi", 0, JH7100_CLK_CPU_AXI),
> + JH71X0_GATE(JH7100_CLK_DMA2PNOC_AXI, "dma2pnoc_axi", 0, JH7100_CLK_CPU_AXI),
> + JH71X0_GATE(JH7100_CLK_SGDMA2P_AHB, "sgdma2p_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0__DIV(JH7100_CLK_DLA_BUS, "dla_bus", 4, JH7100_CLK_DLA_ROOT),
> + JH71X0_GATE(JH7100_CLK_DLA_AXI, "dla_axi", 0, JH7100_CLK_DLA_BUS),
> + JH71X0_GATE(JH7100_CLK_DLANOC_AXI, "dlanoc_axi", 0, JH7100_CLK_DLA_BUS),
> + JH71X0_GATE(JH7100_CLK_DLA_APB, "dla_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_VP6_CORE, "vp6_core", 0, 4, JH7100_CLK_DSP_ROOT_DIV),
> + JH71X0__DIV(JH7100_CLK_VP6BUS_SRC, "vp6bus_src", 4, JH7100_CLK_DSP_ROOT),
> + JH71X0_GDIV(JH7100_CLK_VP6_AXI, "vp6_axi", 0, 4, JH7100_CLK_VP6BUS_SRC),
> + JH71X0__DIV(JH7100_CLK_VCDECBUS_SRC, "vcdecbus_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
> + JH71X0__DIV(JH7100_CLK_VDEC_BUS, "vdec_bus", 8, JH7100_CLK_VCDECBUS_SRC),
> + JH71X0_GATE(JH7100_CLK_VDEC_AXI, "vdec_axi", 0, JH7100_CLK_VDEC_BUS),
> + JH71X0_GATE(JH7100_CLK_VDECBRG_MAIN, "vdecbrg_mainclk", 0, JH7100_CLK_VDEC_BUS),
> + JH71X0_GDIV(JH7100_CLK_VDEC_BCLK, "vdec_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
> + JH71X0_GDIV(JH7100_CLK_VDEC_CCLK, "vdec_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
> + JH71X0_GATE(JH7100_CLK_VDEC_APB, "vdec_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_JPEG_AXI, "jpeg_axi", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0_GDIV(JH7100_CLK_JPEG_CCLK, "jpeg_cclk", 0, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0_GATE(JH7100_CLK_JPEG_APB, "jpeg_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_GC300_2X, "gc300_2x", 0, 8, JH7100_CLK_CDECHIFI4_ROOT),
> + JH71X0_GATE(JH7100_CLK_GC300_AHB, "gc300_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0__DIV(JH7100_CLK_JPCGC300_AXIBUS, "jpcgc300_axibus", 8, JH7100_CLK_VCDECBUS_SRC),
> + JH71X0_GATE(JH7100_CLK_GC300_AXI, "gc300_axi", 0, JH7100_CLK_JPCGC300_AXIBUS),
> + JH71X0_GATE(JH7100_CLK_JPCGC300_MAIN, "jpcgc300_mainclk", 0, JH7100_CLK_JPCGC300_AXIBUS),
> + JH71X0__DIV(JH7100_CLK_VENC_BUS, "venc_bus", 8, JH7100_CLK_VCDECBUS_SRC),
> + JH71X0_GATE(JH7100_CLK_VENC_AXI, "venc_axi", 0, JH7100_CLK_VENC_BUS),
> + JH71X0_GATE(JH7100_CLK_VENCBRG_MAIN, "vencbrg_mainclk", 0, JH7100_CLK_VENC_BUS),
> + JH71X0_GDIV(JH7100_CLK_VENC_BCLK, "venc_bclk", 0, 8, JH7100_CLK_VCDECBUS_SRC),
> + JH71X0_GDIV(JH7100_CLK_VENC_CCLK, "venc_cclk", 0, 8, JH7100_CLK_CDEC_ROOT),
> + JH71X0_GATE(JH7100_CLK_VENC_APB, "venc_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV2, "ddrpll_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_PLL1_OUT),
> + JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV4, "ddrpll_div4", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV2),
> + JH71X0_GDIV(JH7100_CLK_DDRPLL_DIV8, "ddrpll_div8", CLK_IS_CRITICAL, 2, JH7100_CLK_DDRPLL_DIV4),
> + JH71X0_GDIV(JH7100_CLK_DDROSC_DIV2, "ddrosc_div2", CLK_IS_CRITICAL, 2, JH7100_CLK_OSC_SYS),
> + JH71X0_GMUX(JH7100_CLK_DDRC0, "ddrc0", CLK_IS_CRITICAL, 4,
> JH7100_CLK_DDROSC_DIV2,
> JH7100_CLK_DDRPLL_DIV2,
> JH7100_CLK_DDRPLL_DIV4,
> JH7100_CLK_DDRPLL_DIV8),
> - JH7100_GMUX(JH7100_CLK_DDRC1, "ddrc1", CLK_IS_CRITICAL, 4,
> + JH71X0_GMUX(JH7100_CLK_DDRC1, "ddrc1", CLK_IS_CRITICAL, 4,
> JH7100_CLK_DDROSC_DIV2,
> JH7100_CLK_DDRPLL_DIV2,
> JH7100_CLK_DDRPLL_DIV4,
> JH7100_CLK_DDRPLL_DIV8),
> - JH7100_GATE(JH7100_CLK_DDRPHY_APB, "ddrphy_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100__DIV(JH7100_CLK_NOC_ROB, "noc_rob", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100__DIV(JH7100_CLK_NOC_COG, "noc_cog", 8, JH7100_CLK_DLA_ROOT),
> - JH7100_GATE(JH7100_CLK_NNE_AHB, "nne_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100__DIV(JH7100_CLK_NNEBUS_SRC1, "nnebus_src1", 4, JH7100_CLK_DSP_ROOT),
> - JH7100__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 2,
> + JH71X0_GATE(JH7100_CLK_DDRPHY_APB, "ddrphy_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0__DIV(JH7100_CLK_NOC_ROB, "noc_rob", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0__DIV(JH7100_CLK_NOC_COG, "noc_cog", 8, JH7100_CLK_DLA_ROOT),
> + JH71X0_GATE(JH7100_CLK_NNE_AHB, "nne_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0__DIV(JH7100_CLK_NNEBUS_SRC1, "nnebus_src1", 4, JH7100_CLK_DSP_ROOT),
> + JH71X0__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 2,
> JH7100_CLK_CPU_AXI,
> JH7100_CLK_NNEBUS_SRC1),
> - JH7100_GATE(JH7100_CLK_NNE_AXI, "nne_axi", 0, JH7100_CLK_NNE_BUS),
> - JH7100_GATE(JH7100_CLK_NNENOC_AXI, "nnenoc_axi", 0, JH7100_CLK_NNE_BUS),
> - JH7100_GATE(JH7100_CLK_DLASLV_AXI, "dlaslv_axi", 0, JH7100_CLK_NNE_BUS),
> - JH7100_GATE(JH7100_CLK_DSPX2C_AXI, "dspx2c_axi", CLK_IS_CRITICAL, JH7100_CLK_NNE_BUS),
> - JH7100__DIV(JH7100_CLK_HIFI4_SRC, "hifi4_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
> - JH7100__DIV(JH7100_CLK_HIFI4_COREFREE, "hifi4_corefree", 8, JH7100_CLK_HIFI4_SRC),
> - JH7100_GATE(JH7100_CLK_HIFI4_CORE, "hifi4_core", 0, JH7100_CLK_HIFI4_COREFREE),
> - JH7100__DIV(JH7100_CLK_HIFI4_BUS, "hifi4_bus", 8, JH7100_CLK_HIFI4_COREFREE),
> - JH7100_GATE(JH7100_CLK_HIFI4_AXI, "hifi4_axi", 0, JH7100_CLK_HIFI4_BUS),
> - JH7100_GATE(JH7100_CLK_HIFI4NOC_AXI, "hifi4noc_axi", 0, JH7100_CLK_HIFI4_BUS),
> - JH7100__DIV(JH7100_CLK_SGDMA1P_BUS, "sgdma1p_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100_GATE(JH7100_CLK_SGDMA1P_AXI, "sgdma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
> - JH7100_GATE(JH7100_CLK_DMA1P_AXI, "dma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
> - JH7100_GDIV(JH7100_CLK_X2C_AXI, "x2c_axi", CLK_IS_CRITICAL, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100__DIV(JH7100_CLK_USB_BUS, "usb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> - JH7100_GATE(JH7100_CLK_USB_AXI, "usb_axi", 0, JH7100_CLK_USB_BUS),
> - JH7100_GATE(JH7100_CLK_USBNOC_AXI, "usbnoc_axi", 0, JH7100_CLK_USB_BUS),
> - JH7100__DIV(JH7100_CLK_USBPHY_ROOTDIV, "usbphy_rootdiv", 4, JH7100_CLK_GMACUSB_ROOT),
> - JH7100_GDIV(JH7100_CLK_USBPHY_125M, "usbphy_125m", 0, 8, JH7100_CLK_USBPHY_ROOTDIV),
> - JH7100_GDIV(JH7100_CLK_USBPHY_PLLDIV25M, "usbphy_plldiv25m", 0, 32, JH7100_CLK_USBPHY_ROOTDIV),
> - JH7100__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2,
> + JH71X0_GATE(JH7100_CLK_NNE_AXI, "nne_axi", 0, JH7100_CLK_NNE_BUS),
> + JH71X0_GATE(JH7100_CLK_NNENOC_AXI, "nnenoc_axi", 0, JH7100_CLK_NNE_BUS),
> + JH71X0_GATE(JH7100_CLK_DLASLV_AXI, "dlaslv_axi", 0, JH7100_CLK_NNE_BUS),
> + JH71X0_GATE(JH7100_CLK_DSPX2C_AXI, "dspx2c_axi", CLK_IS_CRITICAL, JH7100_CLK_NNE_BUS),
> + JH71X0__DIV(JH7100_CLK_HIFI4_SRC, "hifi4_src", 4, JH7100_CLK_CDECHIFI4_ROOT),
> + JH71X0__DIV(JH7100_CLK_HIFI4_COREFREE, "hifi4_corefree", 8, JH7100_CLK_HIFI4_SRC),
> + JH71X0_GATE(JH7100_CLK_HIFI4_CORE, "hifi4_core", 0, JH7100_CLK_HIFI4_COREFREE),
> + JH71X0__DIV(JH7100_CLK_HIFI4_BUS, "hifi4_bus", 8, JH7100_CLK_HIFI4_COREFREE),
> + JH71X0_GATE(JH7100_CLK_HIFI4_AXI, "hifi4_axi", 0, JH7100_CLK_HIFI4_BUS),
> + JH71X0_GATE(JH7100_CLK_HIFI4NOC_AXI, "hifi4noc_axi", 0, JH7100_CLK_HIFI4_BUS),
> + JH71X0__DIV(JH7100_CLK_SGDMA1P_BUS, "sgdma1p_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0_GATE(JH7100_CLK_SGDMA1P_AXI, "sgdma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
> + JH71X0_GATE(JH7100_CLK_DMA1P_AXI, "dma1p_axi", 0, JH7100_CLK_SGDMA1P_BUS),
> + JH71X0_GDIV(JH7100_CLK_X2C_AXI, "x2c_axi", CLK_IS_CRITICAL, 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0__DIV(JH7100_CLK_USB_BUS, "usb_bus", 8, JH7100_CLK_CPUNBUS_ROOT_DIV),
> + JH71X0_GATE(JH7100_CLK_USB_AXI, "usb_axi", 0, JH7100_CLK_USB_BUS),
> + JH71X0_GATE(JH7100_CLK_USBNOC_AXI, "usbnoc_axi", 0, JH7100_CLK_USB_BUS),
> + JH71X0__DIV(JH7100_CLK_USBPHY_ROOTDIV, "usbphy_rootdiv", 4, JH7100_CLK_GMACUSB_ROOT),
> + JH71X0_GDIV(JH7100_CLK_USBPHY_125M, "usbphy_125m", 0, 8, JH7100_CLK_USBPHY_ROOTDIV),
> + JH71X0_GDIV(JH7100_CLK_USBPHY_PLLDIV25M, "usbphy_plldiv25m", 0, 32, JH7100_CLK_USBPHY_ROOTDIV),
> + JH71X0__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2,
> JH7100_CLK_OSC_SYS,
> JH7100_CLK_USBPHY_PLLDIV25M),
> - JH7100_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT),
> - JH7100_GATE(JH7100_CLK_AUDIO_SRC, "audio_src", 0, JH7100_CLK_AUDIO_DIV),
> - JH7100_GATE(JH7100_CLK_AUDIO_12288, "audio_12288", 0, JH7100_CLK_OSC_AUD),
> - JH7100_GDIV(JH7100_CLK_VIN_SRC, "vin_src", 0, 4, JH7100_CLK_VIN_ROOT),
> - JH7100__DIV(JH7100_CLK_ISP0_BUS, "isp0_bus", 8, JH7100_CLK_VIN_SRC),
> - JH7100_GATE(JH7100_CLK_ISP0_AXI, "isp0_axi", 0, JH7100_CLK_ISP0_BUS),
> - JH7100_GATE(JH7100_CLK_ISP0NOC_AXI, "isp0noc_axi", 0, JH7100_CLK_ISP0_BUS),
> - JH7100_GATE(JH7100_CLK_ISPSLV_AXI, "ispslv_axi", 0, JH7100_CLK_ISP0_BUS),
> - JH7100__DIV(JH7100_CLK_ISP1_BUS, "isp1_bus", 8, JH7100_CLK_VIN_SRC),
> - JH7100_GATE(JH7100_CLK_ISP1_AXI, "isp1_axi", 0, JH7100_CLK_ISP1_BUS),
> - JH7100_GATE(JH7100_CLK_ISP1NOC_AXI, "isp1noc_axi", 0, JH7100_CLK_ISP1_BUS),
> - JH7100__DIV(JH7100_CLK_VIN_BUS, "vin_bus", 8, JH7100_CLK_VIN_SRC),
> - JH7100_GATE(JH7100_CLK_VIN_AXI, "vin_axi", 0, JH7100_CLK_VIN_BUS),
> - JH7100_GATE(JH7100_CLK_VINNOC_AXI, "vinnoc_axi", 0, JH7100_CLK_VIN_BUS),
> - JH7100_GDIV(JH7100_CLK_VOUT_SRC, "vout_src", 0, 4, JH7100_CLK_VOUT_ROOT),
> - JH7100__DIV(JH7100_CLK_DISPBUS_SRC, "dispbus_src", 4, JH7100_CLK_VOUTBUS_ROOT),
> - JH7100__DIV(JH7100_CLK_DISP_BUS, "disp_bus", 4, JH7100_CLK_DISPBUS_SRC),
> - JH7100_GATE(JH7100_CLK_DISP_AXI, "disp_axi", 0, JH7100_CLK_DISP_BUS),
> - JH7100_GATE(JH7100_CLK_DISPNOC_AXI, "dispnoc_axi", 0, JH7100_CLK_DISP_BUS),
> - JH7100_GATE(JH7100_CLK_SDIO0_AHB, "sdio0_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GDIV(JH7100_CLK_SDIO0_CCLKINT, "sdio0_cclkint", 0, 24, JH7100_CLK_PERH0_SRC),
> - JH7100__INV(JH7100_CLK_SDIO0_CCLKINT_INV, "sdio0_cclkint_inv", JH7100_CLK_SDIO0_CCLKINT),
> - JH7100_GATE(JH7100_CLK_SDIO1_AHB, "sdio1_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GDIV(JH7100_CLK_SDIO1_CCLKINT, "sdio1_cclkint", 0, 24, JH7100_CLK_PERH1_SRC),
> - JH7100__INV(JH7100_CLK_SDIO1_CCLKINT_INV, "sdio1_cclkint_inv", JH7100_CLK_SDIO1_CCLKINT),
> - JH7100_GATE(JH7100_CLK_GMAC_AHB, "gmac_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100__DIV(JH7100_CLK_GMAC_ROOT_DIV, "gmac_root_div", 8, JH7100_CLK_GMACUSB_ROOT),
> - JH7100_GDIV(JH7100_CLK_GMAC_PTP_REF, "gmac_ptp_refclk", 0, 31, JH7100_CLK_GMAC_ROOT_DIV),
> - JH7100_GDIV(JH7100_CLK_GMAC_GTX, "gmac_gtxclk", 0, 255, JH7100_CLK_GMAC_ROOT_DIV),
> - JH7100_GDIV(JH7100_CLK_GMAC_RMII_TX, "gmac_rmii_txclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
> - JH7100_GDIV(JH7100_CLK_GMAC_RMII_RX, "gmac_rmii_rxclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
> - JH7100__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", 3,
> + JH71X0_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT),
> + JH71X0_GATE(JH7100_CLK_AUDIO_SRC, "audio_src", 0, JH7100_CLK_AUDIO_DIV),
> + JH71X0_GATE(JH7100_CLK_AUDIO_12288, "audio_12288", 0, JH7100_CLK_OSC_AUD),
> + JH71X0_GDIV(JH7100_CLK_VIN_SRC, "vin_src", 0, 4, JH7100_CLK_VIN_ROOT),
> + JH71X0__DIV(JH7100_CLK_ISP0_BUS, "isp0_bus", 8, JH7100_CLK_VIN_SRC),
> + JH71X0_GATE(JH7100_CLK_ISP0_AXI, "isp0_axi", 0, JH7100_CLK_ISP0_BUS),
> + JH71X0_GATE(JH7100_CLK_ISP0NOC_AXI, "isp0noc_axi", 0, JH7100_CLK_ISP0_BUS),
> + JH71X0_GATE(JH7100_CLK_ISPSLV_AXI, "ispslv_axi", 0, JH7100_CLK_ISP0_BUS),
> + JH71X0__DIV(JH7100_CLK_ISP1_BUS, "isp1_bus", 8, JH7100_CLK_VIN_SRC),
> + JH71X0_GATE(JH7100_CLK_ISP1_AXI, "isp1_axi", 0, JH7100_CLK_ISP1_BUS),
> + JH71X0_GATE(JH7100_CLK_ISP1NOC_AXI, "isp1noc_axi", 0, JH7100_CLK_ISP1_BUS),
> + JH71X0__DIV(JH7100_CLK_VIN_BUS, "vin_bus", 8, JH7100_CLK_VIN_SRC),
> + JH71X0_GATE(JH7100_CLK_VIN_AXI, "vin_axi", 0, JH7100_CLK_VIN_BUS),
> + JH71X0_GATE(JH7100_CLK_VINNOC_AXI, "vinnoc_axi", 0, JH7100_CLK_VIN_BUS),
> + JH71X0_GDIV(JH7100_CLK_VOUT_SRC, "vout_src", 0, 4, JH7100_CLK_VOUT_ROOT),
> + JH71X0__DIV(JH7100_CLK_DISPBUS_SRC, "dispbus_src", 4, JH7100_CLK_VOUTBUS_ROOT),
> + JH71X0__DIV(JH7100_CLK_DISP_BUS, "disp_bus", 4, JH7100_CLK_DISPBUS_SRC),
> + JH71X0_GATE(JH7100_CLK_DISP_AXI, "disp_axi", 0, JH7100_CLK_DISP_BUS),
> + JH71X0_GATE(JH7100_CLK_DISPNOC_AXI, "dispnoc_axi", 0, JH7100_CLK_DISP_BUS),
> + JH71X0_GATE(JH7100_CLK_SDIO0_AHB, "sdio0_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GDIV(JH7100_CLK_SDIO0_CCLKINT, "sdio0_cclkint", 0, 24, JH7100_CLK_PERH0_SRC),
> + JH71X0__INV(JH7100_CLK_SDIO0_CCLKINT_INV, "sdio0_cclkint_inv", JH7100_CLK_SDIO0_CCLKINT),
> + JH71X0_GATE(JH7100_CLK_SDIO1_AHB, "sdio1_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GDIV(JH7100_CLK_SDIO1_CCLKINT, "sdio1_cclkint", 0, 24, JH7100_CLK_PERH1_SRC),
> + JH71X0__INV(JH7100_CLK_SDIO1_CCLKINT_INV, "sdio1_cclkint_inv", JH7100_CLK_SDIO1_CCLKINT),
> + JH71X0_GATE(JH7100_CLK_GMAC_AHB, "gmac_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0__DIV(JH7100_CLK_GMAC_ROOT_DIV, "gmac_root_div", 8, JH7100_CLK_GMACUSB_ROOT),
> + JH71X0_GDIV(JH7100_CLK_GMAC_PTP_REF, "gmac_ptp_refclk", 0, 31, JH7100_CLK_GMAC_ROOT_DIV),
> + JH71X0_GDIV(JH7100_CLK_GMAC_GTX, "gmac_gtxclk", 0, 255, JH7100_CLK_GMAC_ROOT_DIV),
> + JH71X0_GDIV(JH7100_CLK_GMAC_RMII_TX, "gmac_rmii_txclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
> + JH71X0_GDIV(JH7100_CLK_GMAC_RMII_RX, "gmac_rmii_rxclk", 0, 8, JH7100_CLK_GMAC_RMII_REF),
> + JH71X0__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", 3,
> JH7100_CLK_GMAC_GTX,
> JH7100_CLK_GMAC_TX_INV,
> JH7100_CLK_GMAC_RMII_TX),
> - JH7100__INV(JH7100_CLK_GMAC_TX_INV, "gmac_tx_inv", JH7100_CLK_GMAC_TX),
> - JH7100__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 2,
> + JH71X0__INV(JH7100_CLK_GMAC_TX_INV, "gmac_tx_inv", JH7100_CLK_GMAC_TX),
> + JH71X0__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 2,
> JH7100_CLK_GMAC_GR_MII_RX,
> JH7100_CLK_GMAC_RMII_RX),
> - JH7100__INV(JH7100_CLK_GMAC_RX_INV, "gmac_rx_inv", JH7100_CLK_GMAC_RX_PRE),
> - JH7100_GATE(JH7100_CLK_GMAC_RMII, "gmac_rmii", 0, JH7100_CLK_GMAC_RMII_REF),
> - JH7100_GDIV(JH7100_CLK_GMAC_TOPHYREF, "gmac_tophyref", 0, 127, JH7100_CLK_GMAC_ROOT_DIV),
> - JH7100_GATE(JH7100_CLK_SPI2AHB_AHB, "spi2ahb_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GDIV(JH7100_CLK_SPI2AHB_CORE, "spi2ahb_core", 0, 31, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_EZMASTER_AHB, "ezmaster_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_E24_AHB, "e24_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_E24RTC_TOGGLE, "e24rtc_toggle", 0, JH7100_CLK_OSC_SYS),
> - JH7100_GATE(JH7100_CLK_QSPI_AHB, "qspi_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_QSPI_APB, "qspi_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_QSPI_REF, "qspi_refclk", 0, 31, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_SEC_AHB, "sec_ahb", 0, JH7100_CLK_AHB_BUS),
> - JH7100_GATE(JH7100_CLK_AES, "aes_clk", 0, JH7100_CLK_SEC_AHB),
> - JH7100_GATE(JH7100_CLK_SHA, "sha_clk", 0, JH7100_CLK_SEC_AHB),
> - JH7100_GATE(JH7100_CLK_PKA, "pka_clk", 0, JH7100_CLK_SEC_AHB),
> - JH7100_GATE(JH7100_CLK_TRNG_APB, "trng_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GATE(JH7100_CLK_OTP_APB, "otp_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GATE(JH7100_CLK_UART0_APB, "uart0_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_UART0_CORE, "uart0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_UART1_APB, "uart1_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_UART1_CORE, "uart1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_SPI0_APB, "spi0_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_SPI0_CORE, "spi0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_SPI1_APB, "spi1_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_SPI1_CORE, "spi1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_I2C0_APB, "i2c0_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_I2C0_CORE, "i2c0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_I2C1_APB, "i2c1_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GDIV(JH7100_CLK_I2C1_CORE, "i2c1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> - JH7100_GATE(JH7100_CLK_GPIO_APB, "gpio_apb", 0, JH7100_CLK_APB1_BUS),
> - JH7100_GATE(JH7100_CLK_UART2_APB, "uart2_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_UART2_CORE, "uart2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_UART3_APB, "uart3_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_UART3_CORE, "uart3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_SPI2_APB, "spi2_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_SPI2_CORE, "spi2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_SPI3_APB, "spi3_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_SPI3_CORE, "spi3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_I2C2_APB, "i2c2_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_I2C2_CORE, "i2c2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_I2C3_APB, "i2c3_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_I2C3_CORE, "i2c3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_WDTIMER_APB, "wdtimer_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_WDT_CORE, "wdt_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER0_CORE, "timer0_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER1_CORE, "timer1_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER2_CORE, "timer2_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER3_CORE, "timer3_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER4_CORE, "timer4_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER5_CORE, "timer5_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GDIV(JH7100_CLK_TIMER6_CORE, "timer6_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> - JH7100_GATE(JH7100_CLK_VP6INTC_APB, "vp6intc_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GATE(JH7100_CLK_PWM_APB, "pwm_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GATE(JH7100_CLK_MSI_APB, "msi_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GATE(JH7100_CLK_TEMP_APB, "temp_apb", 0, JH7100_CLK_APB2_BUS),
> - JH7100_GDIV(JH7100_CLK_TEMP_SENSE, "temp_sense", 0, 31, JH7100_CLK_OSC_SYS),
> - JH7100_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0__INV(JH7100_CLK_GMAC_RX_INV, "gmac_rx_inv", JH7100_CLK_GMAC_RX_PRE),
> + JH71X0_GATE(JH7100_CLK_GMAC_RMII, "gmac_rmii", 0, JH7100_CLK_GMAC_RMII_REF),
> + JH71X0_GDIV(JH7100_CLK_GMAC_TOPHYREF, "gmac_tophyref", 0, 127, JH7100_CLK_GMAC_ROOT_DIV),
> + JH71X0_GATE(JH7100_CLK_SPI2AHB_AHB, "spi2ahb_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GDIV(JH7100_CLK_SPI2AHB_CORE, "spi2ahb_core", 0, 31, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_EZMASTER_AHB, "ezmaster_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_E24_AHB, "e24_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_E24RTC_TOGGLE, "e24rtc_toggle", 0, JH7100_CLK_OSC_SYS),
> + JH71X0_GATE(JH7100_CLK_QSPI_AHB, "qspi_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_QSPI_APB, "qspi_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_QSPI_REF, "qspi_refclk", 0, 31, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_SEC_AHB, "sec_ahb", 0, JH7100_CLK_AHB_BUS),
> + JH71X0_GATE(JH7100_CLK_AES, "aes_clk", 0, JH7100_CLK_SEC_AHB),
> + JH71X0_GATE(JH7100_CLK_SHA, "sha_clk", 0, JH7100_CLK_SEC_AHB),
> + JH71X0_GATE(JH7100_CLK_PKA, "pka_clk", 0, JH7100_CLK_SEC_AHB),
> + JH71X0_GATE(JH7100_CLK_TRNG_APB, "trng_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GATE(JH7100_CLK_OTP_APB, "otp_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GATE(JH7100_CLK_UART0_APB, "uart0_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_UART0_CORE, "uart0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_UART1_APB, "uart1_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_UART1_CORE, "uart1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_SPI0_APB, "spi0_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_SPI0_CORE, "spi0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_SPI1_APB, "spi1_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_SPI1_CORE, "spi1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_I2C0_APB, "i2c0_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_I2C0_CORE, "i2c0_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_I2C1_APB, "i2c1_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GDIV(JH7100_CLK_I2C1_CORE, "i2c1_core", 0, 63, JH7100_CLK_PERH1_SRC),
> + JH71X0_GATE(JH7100_CLK_GPIO_APB, "gpio_apb", 0, JH7100_CLK_APB1_BUS),
> + JH71X0_GATE(JH7100_CLK_UART2_APB, "uart2_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_UART2_CORE, "uart2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_UART3_APB, "uart3_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_UART3_CORE, "uart3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_SPI2_APB, "spi2_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_SPI2_CORE, "spi2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_SPI3_APB, "spi3_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_SPI3_CORE, "spi3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_I2C2_APB, "i2c2_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_I2C2_CORE, "i2c2_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_I2C3_APB, "i2c3_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_I2C3_CORE, "i2c3_core", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_WDTIMER_APB, "wdtimer_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_WDT_CORE, "wdt_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER0_CORE, "timer0_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER1_CORE, "timer1_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER2_CORE, "timer2_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER3_CORE, "timer3_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER4_CORE, "timer4_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER5_CORE, "timer5_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GDIV(JH7100_CLK_TIMER6_CORE, "timer6_coreclk", 0, 63, JH7100_CLK_PERH0_SRC),
> + JH71X0_GATE(JH7100_CLK_VP6INTC_APB, "vp6intc_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GATE(JH7100_CLK_PWM_APB, "pwm_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GATE(JH7100_CLK_MSI_APB, "msi_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GATE(JH7100_CLK_TEMP_APB, "temp_apb", 0, JH7100_CLK_APB2_BUS),
> + JH71X0_GDIV(JH7100_CLK_TEMP_SENSE, "temp_sense", 0, 31, JH7100_CLK_OSC_SYS),
> + JH71X0_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
> };
>
> static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data)
> {
> - struct jh7100_clk_priv *priv = data;
> + struct jh71x0_clk_priv *priv = data;
> unsigned int idx = clkspec->args[0];
>
> if (idx < JH7100_CLK_PLL0_OUT)
> @@ -280,7 +280,7 @@ static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data
>
> static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
> {
> - struct jh7100_clk_priv *priv;
> + struct jh71x0_clk_priv *priv;
> unsigned int idx;
> int ret;
>
> @@ -314,12 +314,12 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
> struct clk_parent_data parents[4] = {};
> struct clk_init_data init = {
> .name = jh7100_clk_data[idx].name,
> - .ops = starfive_jh7100_clk_ops(max),
> + .ops = starfive_jh71x0_clk_ops(max),
> .parent_data = parents,
> - .num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
> + .num_parents = ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
> .flags = jh7100_clk_data[idx].flags,
> };
> - struct jh7100_clk *clk = &priv->reg[idx];
> + struct jh71x0_clk *clk = &priv->reg[idx];
> unsigned int i;
>
> for (i = 0; i < init.num_parents; i++) {
> @@ -341,7 +341,7 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
>
> clk->hw.init = &init;
> clk->idx = idx;
> - clk->max_div = max & JH7100_CLK_DIV_MASK;
> + clk->max_div = max & JH71X0_CLK_DIV_MASK;
>
> ret = devm_clk_hw_register(priv->dev, &clk->hw);
> if (ret)
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
> index 6c07b61b4a32..b372083d11c3 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.c
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> - * StarFive JH7100 Clock Generator Driver
> + * StarFive JH71X0 Clock Generator Driver
> *
> * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk>
> */
> @@ -10,29 +10,29 @@
> #include <linux/device.h>
> #include <linux/io.h>
>
> -#include "clk-starfive-jh7100.h"
> +#include "clk-starfive-jh71x0.h"
>
> -static struct jh7100_clk *jh7100_clk_from(struct clk_hw *hw)
> +static struct jh71x0_clk *jh71x0_clk_from(struct clk_hw *hw)
> {
> - return container_of(hw, struct jh7100_clk, hw);
> + return container_of(hw, struct jh71x0_clk, hw);
> }
>
> -static struct jh7100_clk_priv *jh7100_priv_from(struct jh7100_clk *clk)
> +static struct jh71x0_clk_priv *jh71x0_priv_from(struct jh71x0_clk *clk)
> {
> - return container_of(clk, struct jh7100_clk_priv, reg[clk->idx]);
> + return container_of(clk, struct jh71x0_clk_priv, reg[clk->idx]);
> }
>
> -static u32 jh7100_clk_reg_get(struct jh7100_clk *clk)
> +static u32 jh71x0_clk_reg_get(struct jh71x0_clk *clk)
> {
> - struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
> + struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
> void __iomem *reg = priv->base + 4 * clk->idx;
>
> return readl_relaxed(reg);
> }
>
> -static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
> +static void jh71x0_clk_reg_rmw(struct jh71x0_clk *clk, u32 mask, u32 value)
> {
> - struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
> + struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
> void __iomem *reg = priv->base + 4 * clk->idx;
> unsigned long flags;
>
> @@ -42,41 +42,41 @@ static void jh7100_clk_reg_rmw(struct jh7100_clk *clk, u32 mask, u32 value)
> spin_unlock_irqrestore(&priv->rmw_lock, flags);
> }
>
> -static int jh7100_clk_enable(struct clk_hw *hw)
> +static int jh71x0_clk_enable(struct clk_hw *hw)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, JH7100_CLK_ENABLE);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_ENABLE, JH71X0_CLK_ENABLE);
> return 0;
> }
>
> -static void jh7100_clk_disable(struct clk_hw *hw)
> +static void jh71x0_clk_disable(struct clk_hw *hw)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_ENABLE, 0);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_ENABLE, 0);
> }
>
> -static int jh7100_clk_is_enabled(struct clk_hw *hw)
> +static int jh71x0_clk_is_enabled(struct clk_hw *hw)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
>
> - return !!(jh7100_clk_reg_get(clk) & JH7100_CLK_ENABLE);
> + return !!(jh71x0_clk_reg_get(clk) & JH71X0_CLK_ENABLE);
> }
>
> -static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
> +static unsigned long jh71x0_clk_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - u32 div = jh7100_clk_reg_get(clk) & JH7100_CLK_DIV_MASK;
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + u32 div = jh71x0_clk_reg_get(clk) & JH71X0_CLK_DIV_MASK;
>
> return div ? parent_rate / div : 0;
> }
>
> -static int jh7100_clk_determine_rate(struct clk_hw *hw,
> +static int jh71x0_clk_determine_rate(struct clk_hw *hw,
> struct clk_rate_request *req)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> unsigned long parent = req->best_parent_rate;
> unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
> unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
> @@ -102,232 +102,232 @@ static int jh7100_clk_determine_rate(struct clk_hw *hw,
> return 0;
> }
>
> -static int jh7100_clk_set_rate(struct clk_hw *hw,
> +static int jh71x0_clk_set_rate(struct clk_hw *hw,
> unsigned long rate,
> unsigned long parent_rate)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
> 1UL, (unsigned long)clk->max_div);
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_DIV_MASK, div);
> return 0;
> }
>
> -static unsigned long jh7100_clk_frac_recalc_rate(struct clk_hw *hw,
> +static unsigned long jh71x0_clk_frac_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - u32 reg = jh7100_clk_reg_get(clk);
> - unsigned long div100 = 100 * (reg & JH7100_CLK_INT_MASK) +
> - ((reg & JH7100_CLK_FRAC_MASK) >> JH7100_CLK_FRAC_SHIFT);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + u32 reg = jh71x0_clk_reg_get(clk);
> + unsigned long div100 = 100 * (reg & JH71X0_CLK_INT_MASK) +
> + ((reg & JH71X0_CLK_FRAC_MASK) >> JH71X0_CLK_FRAC_SHIFT);
>
> - return (div100 >= JH7100_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
> + return (div100 >= JH71X0_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
> }
>
> -static int jh7100_clk_frac_determine_rate(struct clk_hw *hw,
> +static int jh71x0_clk_frac_determine_rate(struct clk_hw *hw,
> struct clk_rate_request *req)
> {
> unsigned long parent100 = 100 * req->best_parent_rate;
> unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
> unsigned long div100 = clamp(DIV_ROUND_CLOSEST(parent100, rate),
> - JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
> + JH71X0_CLK_FRAC_MIN, JH71X0_CLK_FRAC_MAX);
> unsigned long result = parent100 / div100;
>
> - /* clamp the result as in jh7100_clk_determine_rate() above */
> - if (result > req->max_rate && div100 < JH7100_CLK_FRAC_MAX)
> + /* clamp the result as in jh71x0_clk_determine_rate() above */
> + if (result > req->max_rate && div100 < JH71X0_CLK_FRAC_MAX)
> result = parent100 / (div100 + 1);
> - if (result < req->min_rate && div100 > JH7100_CLK_FRAC_MIN)
> + if (result < req->min_rate && div100 > JH71X0_CLK_FRAC_MIN)
> result = parent100 / (div100 - 1);
>
> req->rate = result;
> return 0;
> }
>
> -static int jh7100_clk_frac_set_rate(struct clk_hw *hw,
> +static int jh71x0_clk_frac_set_rate(struct clk_hw *hw,
> unsigned long rate,
> unsigned long parent_rate)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> unsigned long div100 = clamp(DIV_ROUND_CLOSEST(100 * parent_rate, rate),
> - JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
> - u32 value = ((div100 % 100) << JH7100_CLK_FRAC_SHIFT) | (div100 / 100);
> + JH71X0_CLK_FRAC_MIN, JH71X0_CLK_FRAC_MAX);
> + u32 value = ((div100 % 100) << JH71X0_CLK_FRAC_SHIFT) | (div100 / 100);
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, value);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_DIV_MASK, value);
> return 0;
> }
>
> -static u8 jh7100_clk_get_parent(struct clk_hw *hw)
> +static u8 jh71x0_clk_get_parent(struct clk_hw *hw)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - u32 value = jh7100_clk_reg_get(clk);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + u32 value = jh71x0_clk_reg_get(clk);
>
> - return (value & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT;
> + return (value & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT;
> }
>
> -static int jh7100_clk_set_parent(struct clk_hw *hw, u8 index)
> +static int jh71x0_clk_set_parent(struct clk_hw *hw, u8 index)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - u32 value = (u32)index << JH7100_CLK_MUX_SHIFT;
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + u32 value = (u32)index << JH71X0_CLK_MUX_SHIFT;
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_MUX_MASK, value);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_MUX_MASK, value);
> return 0;
> }
>
> -static int jh7100_clk_mux_determine_rate(struct clk_hw *hw,
> +static int jh71x0_clk_mux_determine_rate(struct clk_hw *hw,
> struct clk_rate_request *req)
> {
> return clk_mux_determine_rate_flags(hw, req, 0);
> }
>
> -static int jh7100_clk_get_phase(struct clk_hw *hw)
> +static int jh71x0_clk_get_phase(struct clk_hw *hw)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - u32 value = jh7100_clk_reg_get(clk);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + u32 value = jh71x0_clk_reg_get(clk);
>
> - return (value & JH7100_CLK_INVERT) ? 180 : 0;
> + return (value & JH71X0_CLK_INVERT) ? 180 : 0;
> }
>
> -static int jh7100_clk_set_phase(struct clk_hw *hw, int degrees)
> +static int jh71x0_clk_set_phase(struct clk_hw *hw, int degrees)
> {
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> u32 value;
>
> if (degrees == 0)
> value = 0;
> else if (degrees == 180)
> - value = JH7100_CLK_INVERT;
> + value = JH71X0_CLK_INVERT;
> else
> return -EINVAL;
>
> - jh7100_clk_reg_rmw(clk, JH7100_CLK_INVERT, value);
> + jh71x0_clk_reg_rmw(clk, JH71X0_CLK_INVERT, value);
> return 0;
> }
>
> #ifdef CONFIG_DEBUG_FS
> -static void jh7100_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
> +static void jh71x0_clk_debug_init(struct clk_hw *hw, struct dentry *dentry)
> {
> - static const struct debugfs_reg32 jh7100_clk_reg = {
> + static const struct debugfs_reg32 jh71x0_clk_reg = {
> .name = "CTRL",
> .offset = 0,
> };
> - struct jh7100_clk *clk = jh7100_clk_from(hw);
> - struct jh7100_clk_priv *priv = jh7100_priv_from(clk);
> + struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> + struct jh71x0_clk_priv *priv = jh71x0_priv_from(clk);
> struct debugfs_regset32 *regset;
>
> regset = devm_kzalloc(priv->dev, sizeof(*regset), GFP_KERNEL);
> if (!regset)
> return;
>
> - regset->regs = &jh7100_clk_reg;
> + regset->regs = &jh71x0_clk_reg;
> regset->nregs = 1;
> regset->base = priv->base + 4 * clk->idx;
>
> debugfs_create_regset32("registers", 0400, dentry, regset);
> }
> #else
> -#define jh7100_clk_debug_init NULL
> +#define jh71x0_clk_debug_init NULL
> #endif
>
> -static const struct clk_ops jh7100_clk_gate_ops = {
> - .enable = jh7100_clk_enable,
> - .disable = jh7100_clk_disable,
> - .is_enabled = jh7100_clk_is_enabled,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_gate_ops = {
> + .enable = jh71x0_clk_enable,
> + .disable = jh71x0_clk_disable,
> + .is_enabled = jh71x0_clk_is_enabled,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_div_ops = {
> - .recalc_rate = jh7100_clk_recalc_rate,
> - .determine_rate = jh7100_clk_determine_rate,
> - .set_rate = jh7100_clk_set_rate,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_div_ops = {
> + .recalc_rate = jh71x0_clk_recalc_rate,
> + .determine_rate = jh71x0_clk_determine_rate,
> + .set_rate = jh71x0_clk_set_rate,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_fdiv_ops = {
> - .recalc_rate = jh7100_clk_frac_recalc_rate,
> - .determine_rate = jh7100_clk_frac_determine_rate,
> - .set_rate = jh7100_clk_frac_set_rate,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_fdiv_ops = {
> + .recalc_rate = jh71x0_clk_frac_recalc_rate,
> + .determine_rate = jh71x0_clk_frac_determine_rate,
> + .set_rate = jh71x0_clk_frac_set_rate,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_gdiv_ops = {
> - .enable = jh7100_clk_enable,
> - .disable = jh7100_clk_disable,
> - .is_enabled = jh7100_clk_is_enabled,
> - .recalc_rate = jh7100_clk_recalc_rate,
> - .determine_rate = jh7100_clk_determine_rate,
> - .set_rate = jh7100_clk_set_rate,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_gdiv_ops = {
> + .enable = jh71x0_clk_enable,
> + .disable = jh71x0_clk_disable,
> + .is_enabled = jh71x0_clk_is_enabled,
> + .recalc_rate = jh71x0_clk_recalc_rate,
> + .determine_rate = jh71x0_clk_determine_rate,
> + .set_rate = jh71x0_clk_set_rate,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_mux_ops = {
> - .determine_rate = jh7100_clk_mux_determine_rate,
> - .set_parent = jh7100_clk_set_parent,
> - .get_parent = jh7100_clk_get_parent,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_mux_ops = {
> + .determine_rate = jh71x0_clk_mux_determine_rate,
> + .set_parent = jh71x0_clk_set_parent,
> + .get_parent = jh71x0_clk_get_parent,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_gmux_ops = {
> - .enable = jh7100_clk_enable,
> - .disable = jh7100_clk_disable,
> - .is_enabled = jh7100_clk_is_enabled,
> - .determine_rate = jh7100_clk_mux_determine_rate,
> - .set_parent = jh7100_clk_set_parent,
> - .get_parent = jh7100_clk_get_parent,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_gmux_ops = {
> + .enable = jh71x0_clk_enable,
> + .disable = jh71x0_clk_disable,
> + .is_enabled = jh71x0_clk_is_enabled,
> + .determine_rate = jh71x0_clk_mux_determine_rate,
> + .set_parent = jh71x0_clk_set_parent,
> + .get_parent = jh71x0_clk_get_parent,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_mdiv_ops = {
> - .recalc_rate = jh7100_clk_recalc_rate,
> - .determine_rate = jh7100_clk_determine_rate,
> - .get_parent = jh7100_clk_get_parent,
> - .set_parent = jh7100_clk_set_parent,
> - .set_rate = jh7100_clk_set_rate,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_mdiv_ops = {
> + .recalc_rate = jh71x0_clk_recalc_rate,
> + .determine_rate = jh71x0_clk_determine_rate,
> + .get_parent = jh71x0_clk_get_parent,
> + .set_parent = jh71x0_clk_set_parent,
> + .set_rate = jh71x0_clk_set_rate,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_gmd_ops = {
> - .enable = jh7100_clk_enable,
> - .disable = jh7100_clk_disable,
> - .is_enabled = jh7100_clk_is_enabled,
> - .recalc_rate = jh7100_clk_recalc_rate,
> - .determine_rate = jh7100_clk_determine_rate,
> - .get_parent = jh7100_clk_get_parent,
> - .set_parent = jh7100_clk_set_parent,
> - .set_rate = jh7100_clk_set_rate,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_gmd_ops = {
> + .enable = jh71x0_clk_enable,
> + .disable = jh71x0_clk_disable,
> + .is_enabled = jh71x0_clk_is_enabled,
> + .recalc_rate = jh71x0_clk_recalc_rate,
> + .determine_rate = jh71x0_clk_determine_rate,
> + .get_parent = jh71x0_clk_get_parent,
> + .set_parent = jh71x0_clk_set_parent,
> + .set_rate = jh71x0_clk_set_rate,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -static const struct clk_ops jh7100_clk_inv_ops = {
> - .get_phase = jh7100_clk_get_phase,
> - .set_phase = jh7100_clk_set_phase,
> - .debug_init = jh7100_clk_debug_init,
> +static const struct clk_ops jh71x0_clk_inv_ops = {
> + .get_phase = jh71x0_clk_get_phase,
> + .set_phase = jh71x0_clk_set_phase,
> + .debug_init = jh71x0_clk_debug_init,
> };
>
> -const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
> +const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
> {
> - if (max & JH7100_CLK_DIV_MASK) {
> - if (max & JH7100_CLK_MUX_MASK) {
> - if (max & JH7100_CLK_ENABLE)
> - return &jh7100_clk_gmd_ops;
> - return &jh7100_clk_mdiv_ops;
> + if (max & JH71X0_CLK_DIV_MASK) {
> + if (max & JH71X0_CLK_MUX_MASK) {
> + if (max & JH71X0_CLK_ENABLE)
> + return &jh71x0_clk_gmd_ops;
> + return &jh71x0_clk_mdiv_ops;
> }
> - if (max & JH7100_CLK_ENABLE)
> - return &jh7100_clk_gdiv_ops;
> - if (max == JH7100_CLK_FRAC_MAX)
> - return &jh7100_clk_fdiv_ops;
> - return &jh7100_clk_div_ops;
> + if (max & JH71X0_CLK_ENABLE)
> + return &jh71x0_clk_gdiv_ops;
> + if (max == JH71X0_CLK_FRAC_MAX)
> + return &jh71x0_clk_fdiv_ops;
> + return &jh71x0_clk_div_ops;
> }
>
> - if (max & JH7100_CLK_MUX_MASK) {
> - if (max & JH7100_CLK_ENABLE)
> - return &jh7100_clk_gmux_ops;
> - return &jh7100_clk_mux_ops;
> + if (max & JH71X0_CLK_MUX_MASK) {
> + if (max & JH71X0_CLK_ENABLE)
> + return &jh71x0_clk_gmux_ops;
> + return &jh71x0_clk_mux_ops;
> }
>
> - if (max & JH7100_CLK_ENABLE)
> - return &jh7100_clk_gate_ops;
> + if (max & JH71X0_CLK_ENABLE)
> + return &jh71x0_clk_gate_ops;
>
> - return &jh7100_clk_inv_ops;
> + return &jh71x0_clk_inv_ops;
> }
> -EXPORT_SYMBOL_GPL(starfive_jh7100_clk_ops);
> +EXPORT_SYMBOL_GPL(starfive_jh71x0_clk_ops);
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
> index a8ba6e25b5ce..baf4b5cb4b8a 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.h
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
> @@ -1,6 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __CLK_STARFIVE_JH7100_H
> -#define __CLK_STARFIVE_JH7100_H
> +#ifndef __CLK_STARFIVE_JH71X0_H
> +#define __CLK_STARFIVE_JH71X0_H
>
> #include <linux/bits.h>
> #include <linux/clk-provider.h>
> @@ -8,107 +8,107 @@
> #include <linux/spinlock.h>
>
> /* register fields */
> -#define JH7100_CLK_ENABLE BIT(31)
> -#define JH7100_CLK_INVERT BIT(30)
> -#define JH7100_CLK_MUX_MASK GENMASK(27, 24)
> -#define JH7100_CLK_MUX_SHIFT 24
> -#define JH7100_CLK_DIV_MASK GENMASK(23, 0)
> -#define JH7100_CLK_FRAC_MASK GENMASK(15, 8)
> -#define JH7100_CLK_FRAC_SHIFT 8
> -#define JH7100_CLK_INT_MASK GENMASK(7, 0)
> +#define JH71X0_CLK_ENABLE BIT(31)
> +#define JH71X0_CLK_INVERT BIT(30)
> +#define JH71X0_CLK_MUX_MASK GENMASK(27, 24)
> +#define JH71X0_CLK_MUX_SHIFT 24
> +#define JH71X0_CLK_DIV_MASK GENMASK(23, 0)
> +#define JH71X0_CLK_FRAC_MASK GENMASK(15, 8)
> +#define JH71X0_CLK_FRAC_SHIFT 8
> +#define JH71X0_CLK_INT_MASK GENMASK(7, 0)
>
> /* fractional divider min/max */
> -#define JH7100_CLK_FRAC_MIN 100UL
> -#define JH7100_CLK_FRAC_MAX 25599UL
> +#define JH71X0_CLK_FRAC_MIN 100UL
> +#define JH71X0_CLK_FRAC_MAX 25599UL
>
> /* clock data */
> -struct jh7100_clk_data {
> +struct jh71x0_clk_data {
> const char *name;
> unsigned long flags;
> u32 max;
> u8 parents[4];
> };
>
> -#define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = { \
> +#define JH71X0_GATE(_idx, _name, _flags, _parent) [_idx] = { \
> .name = _name, \
> .flags = CLK_SET_RATE_PARENT | (_flags), \
> - .max = JH7100_CLK_ENABLE, \
> + .max = JH71X0_CLK_ENABLE, \
> .parents = { [0] = _parent }, \
> }
ERROR: space prohibited before open square bracket '['
#1155: FILE: drivers/clk/starfive/clk-starfive-jh71x0.h:32:
+#define JH71X0_GATE(_idx, _name, _flags, _parent) [_idx] = { \
Same for others define.
I would suggest this style.
Hope this can help you:
#define JH71X0_GATE(_idx, _name, _flags, _parent) \
[_idx] = { \
.name = _name, \
.flags = CLK_SET_RATE_PARENT | (_flags), \
.max = JH71X0_CLK_ENABLE, \
.parents = { [0] = _parent }, \
}
tested using:
scripts/checkpatch.pl -f drivers/clk/starfive/clk-starfive-jh71x0.h
Thanks for your work,
Tommaso
>
> -#define JH7100__DIV(_idx, _name, _max, _parent) [_idx] = { \
> +#define JH71X0__DIV(_idx, _name, _max, _parent) [_idx] = { \
> .name = _name, \
> .flags = 0, \
> .max = _max, \
> .parents = { [0] = _parent }, \
> }
>
> -#define JH7100_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
> +#define JH71X0_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
> .name = _name, \
> .flags = _flags, \
> - .max = JH7100_CLK_ENABLE | (_max), \
> + .max = JH71X0_CLK_ENABLE | (_max), \
> .parents = { [0] = _parent }, \
> }
>
> -#define JH7100_FDIV(_idx, _name, _parent) [_idx] = { \
> +#define JH71X0_FDIV(_idx, _name, _parent) [_idx] = { \
> .name = _name, \
> .flags = 0, \
> - .max = JH7100_CLK_FRAC_MAX, \
> + .max = JH71X0_CLK_FRAC_MAX, \
> .parents = { [0] = _parent }, \
> }
>
> -#define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = { \
> +#define JH71X0__MUX(_idx, _name, _nparents, ...) [_idx] = { \
> .name = _name, \
> .flags = 0, \
> - .max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT, \
> + .max = ((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT, \
> .parents = { __VA_ARGS__ }, \
> }
>
> -#define JH7100_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
> +#define JH71X0_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
> .name = _name, \
> .flags = _flags, \
> - .max = JH7100_CLK_ENABLE | \
> - (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT), \
> + .max = JH71X0_CLK_ENABLE | \
> + (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT), \
> .parents = { __VA_ARGS__ }, \
> }
>
> -#define JH7100_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
> +#define JH71X0_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
> .name = _name, \
> .flags = 0, \
> - .max = (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
> + .max = (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
> .parents = { __VA_ARGS__ }, \
> }
>
> -#define JH7100__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
> +#define JH71X0__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
> .name = _name, \
> .flags = _flags, \
> - .max = JH7100_CLK_ENABLE | \
> - (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
> + .max = JH71X0_CLK_ENABLE | \
> + (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
> .parents = { __VA_ARGS__ }, \
> }
>
> -#define JH7100__INV(_idx, _name, _parent) [_idx] = { \
> +#define JH71X0__INV(_idx, _name, _parent) [_idx] = { \
> .name = _name, \
> .flags = CLK_SET_RATE_PARENT, \
> - .max = JH7100_CLK_INVERT, \
> + .max = JH71X0_CLK_INVERT, \
> .parents = { [0] = _parent }, \
> }
>
> -struct jh7100_clk {
> +struct jh71x0_clk {
> struct clk_hw hw;
> unsigned int idx;
> unsigned int max_div;
> };
>
> -struct jh7100_clk_priv {
> +struct jh71x0_clk_priv {
> /* protect clk enable and set rate/parent from happening at the same time */
> spinlock_t rmw_lock;
> struct device *dev;
> void __iomem *base;
> struct clk_hw *pll[3];
> - struct jh7100_clk reg[];
> + struct jh71x0_clk reg[];
> };
>
> -const struct clk_ops *starfive_jh7100_clk_ops(u32 max);
> +const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
>
> #endif
> --
> 2.38.1
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers
2023-03-14 14:34 ` Philipp Zabel
@ 2023-03-17 8:17 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-17 8:17 UTC (permalink / raw)
To: Philipp Zabel, linux-clk, devicetree, linux-riscv
Cc: Stephen Boyd, Michael Turquette, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, linux-kernel
On Tue, 14 Mar 2023 15:34:26 +0100, Philipp Zabel wrote:
> On Sa, 2023-03-11 at 17:07 +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> This moves the StarFive JH7100 reset driver to a new subdirectory in
>> preparation for adding more StarFive reset drivers.
>>
>> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> MAINTAINERS | 2 +-
>> drivers/reset/Kconfig | 8 +-------
>> drivers/reset/Makefile | 2 +-
>> drivers/reset/starfive/Kconfig | 8 ++++++++
>> drivers/reset/starfive/Makefile | 2 ++
>> drivers/reset/{ => starfive}/reset-starfive-jh7100.c | 0
>> 6 files changed, 13 insertions(+), 9 deletions(-)
>> create mode 100644 drivers/reset/starfive/Kconfig
>> create mode 100644 drivers/reset/starfive/Makefile
>> rename drivers/reset/{ => starfive}/reset-starfive-jh7100.c (100%)
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index caba3b61ad5c..87f210e357ca 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19940,7 +19940,7 @@ STARFIVE JH7100 RESET CONTROLLER DRIVER
>> M: Emil Renner Berthing <kernel@esmil.dk>
>> S: Maintained
>> F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
>> -F: drivers/reset/reset-starfive-jh7100.c
>> +F: drivers/reset/starfive/reset-starfive-jh7100.c
>> F: include/dt-bindings/reset/starfive-jh7100.h
>>
>>
>>
>>
>> STARFIVE JH71XX PMU CONTROLLER DRIVER
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 6ae5aa46a6b2..6aa8f243b30c 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -232,13 +232,6 @@ config RESET_SOCFPGA
>> This enables the reset driver for the SoCFPGA ARMv7 platforms. This
>> driver gets initialized early during platform init calls.
>>
>>
>>
>>
>> -config RESET_STARFIVE_JH7100
>> - bool "StarFive JH7100 Reset Driver"
>> - depends on ARCH_STARFIVE || COMPILE_TEST
>> - default ARCH_STARFIVE
>> - help
>> - This enables the reset controller driver for the StarFive JH7100 SoC.
>> -
>> config RESET_SUNPLUS
>> bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
>> default ARCH_SUNPLUS
>> @@ -320,6 +313,7 @@ config RESET_ZYNQ
>> help
>> This enables the reset controller driver for Xilinx Zynq SoCs.
>>
>>
>>
>>
>> +source "drivers/reset/starfive/Kconfig"
>> source "drivers/reset/sti/Kconfig"
>> source "drivers/reset/hisilicon/Kconfig"
>> source "drivers/reset/tegra/Kconfig"
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 3e7e5fd633a8..719b8f6f84bc 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>> obj-y += core.o
>> obj-y += hisilicon/
>> +obj-$(CONFIG_ARCH_STARFIVE) += starfive/
>
> This should really be obj-y, otherwise this won't compile with
> COMPILE_TEST=y but ARCH_STARFIVE=n.
>
> With that fixed,
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
The same problem exists in drivers/clk/Makefile.
Will fix them in the next version. Thank you for your review.
Best regards,
Hal
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code
2023-03-16 19:05 ` Tommaso Merciai
@ 2023-03-18 4:19 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-18 4:19 UTC (permalink / raw)
To: Tommaso Merciai
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, Emil Renner Berthing, linux-kernel
On Thu, 16 Mar 2023 20:05:12 +0100, Tommaso Merciai wrote:
> Hello Hal,
> Patcht itself looks good to me, btw I have some style issue applying
> this:
>
> On Sat, Mar 11, 2023 at 05:07:16PM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Rename some variables from "jh7100" or "JH7100" to "jh71x0"
>> or "JH71X0".
>>
>> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../clk/starfive/clk-starfive-jh7100-audio.c | 74 ++--
>> drivers/clk/starfive/clk-starfive-jh7100.c | 388 +++++++++---------
>> drivers/clk/starfive/clk-starfive-jh71x0.c | 284 ++++++-------
>> drivers/clk/starfive/clk-starfive-jh71x0.h | 72 ++--
>> 4 files changed, 409 insertions(+), 409 deletions(-)
>>
[...]
>> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
>> index a8ba6e25b5ce..baf4b5cb4b8a 100644
>> --- a/drivers/clk/starfive/clk-starfive-jh71x0.h
>> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
>> @@ -1,6 +1,6 @@
>> /* SPDX-License-Identifier: GPL-2.0 */
>> -#ifndef __CLK_STARFIVE_JH7100_H
>> -#define __CLK_STARFIVE_JH7100_H
>> +#ifndef __CLK_STARFIVE_JH71X0_H
>> +#define __CLK_STARFIVE_JH71X0_H
>>
>> #include <linux/bits.h>
>> #include <linux/clk-provider.h>
>> @@ -8,107 +8,107 @@
>> #include <linux/spinlock.h>
>>
>> /* register fields */
>> -#define JH7100_CLK_ENABLE BIT(31)
>> -#define JH7100_CLK_INVERT BIT(30)
>> -#define JH7100_CLK_MUX_MASK GENMASK(27, 24)
>> -#define JH7100_CLK_MUX_SHIFT 24
>> -#define JH7100_CLK_DIV_MASK GENMASK(23, 0)
>> -#define JH7100_CLK_FRAC_MASK GENMASK(15, 8)
>> -#define JH7100_CLK_FRAC_SHIFT 8
>> -#define JH7100_CLK_INT_MASK GENMASK(7, 0)
>> +#define JH71X0_CLK_ENABLE BIT(31)
>> +#define JH71X0_CLK_INVERT BIT(30)
>> +#define JH71X0_CLK_MUX_MASK GENMASK(27, 24)
>> +#define JH71X0_CLK_MUX_SHIFT 24
>> +#define JH71X0_CLK_DIV_MASK GENMASK(23, 0)
>> +#define JH71X0_CLK_FRAC_MASK GENMASK(15, 8)
>> +#define JH71X0_CLK_FRAC_SHIFT 8
>> +#define JH71X0_CLK_INT_MASK GENMASK(7, 0)
>>
>> /* fractional divider min/max */
>> -#define JH7100_CLK_FRAC_MIN 100UL
>> -#define JH7100_CLK_FRAC_MAX 25599UL
>> +#define JH71X0_CLK_FRAC_MIN 100UL
>> +#define JH71X0_CLK_FRAC_MAX 25599UL
>>
>> /* clock data */
>> -struct jh7100_clk_data {
>> +struct jh71x0_clk_data {
>> const char *name;
>> unsigned long flags;
>> u32 max;
>> u8 parents[4];
>> };
>>
>> -#define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = { \
>> +#define JH71X0_GATE(_idx, _name, _flags, _parent) [_idx] = { \
>> .name = _name, \
>> .flags = CLK_SET_RATE_PARENT | (_flags), \
>> - .max = JH7100_CLK_ENABLE, \
>> + .max = JH71X0_CLK_ENABLE, \
>> .parents = { [0] = _parent }, \
>> }
>
>
> ERROR: space prohibited before open square bracket '['
> #1155: FILE: drivers/clk/starfive/clk-starfive-jh71x0.h:32:
> +#define JH71X0_GATE(_idx, _name, _flags, _parent) [_idx] = { \
>
> Same for others define.
> I would suggest this style.
> Hope this can help you:
>
> #define JH71X0_GATE(_idx, _name, _flags, _parent) \
> [_idx] = { \
> .name = _name, \
> .flags = CLK_SET_RATE_PARENT | (_flags), \
> .max = JH71X0_CLK_ENABLE, \
> .parents = { [0] = _parent }, \
> }
>
> tested using:
>
> scripts/checkpatch.pl -f drivers/clk/starfive/clk-starfive-jh71x0.h
I will fix the errors reported by checkpatch.pl in v6. Thanks.
Best regards,
Hal
>
>
> Thanks for your work,
> Tommaso
>
>
>>
>> -#define JH7100__DIV(_idx, _name, _max, _parent) [_idx] = { \
>> +#define JH71X0__DIV(_idx, _name, _max, _parent) [_idx] = { \
>> .name = _name, \
>> .flags = 0, \
>> .max = _max, \
>> .parents = { [0] = _parent }, \
>> }
>>
>> -#define JH7100_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
>> +#define JH71X0_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = { \
>> .name = _name, \
>> .flags = _flags, \
>> - .max = JH7100_CLK_ENABLE | (_max), \
>> + .max = JH71X0_CLK_ENABLE | (_max), \
>> .parents = { [0] = _parent }, \
>> }
>>
>> -#define JH7100_FDIV(_idx, _name, _parent) [_idx] = { \
>> +#define JH71X0_FDIV(_idx, _name, _parent) [_idx] = { \
>> .name = _name, \
>> .flags = 0, \
>> - .max = JH7100_CLK_FRAC_MAX, \
>> + .max = JH71X0_CLK_FRAC_MAX, \
>> .parents = { [0] = _parent }, \
>> }
>>
>> -#define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = { \
>> +#define JH71X0__MUX(_idx, _name, _nparents, ...) [_idx] = { \
>> .name = _name, \
>> .flags = 0, \
>> - .max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT, \
>> + .max = ((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT, \
>> .parents = { __VA_ARGS__ }, \
>> }
>>
>> -#define JH7100_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
>> +#define JH71X0_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = { \
>> .name = _name, \
>> .flags = _flags, \
>> - .max = JH7100_CLK_ENABLE | \
>> - (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT), \
>> + .max = JH71X0_CLK_ENABLE | \
>> + (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT), \
>> .parents = { __VA_ARGS__ }, \
>> }
>>
>> -#define JH7100_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
>> +#define JH71X0_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = { \
>> .name = _name, \
>> .flags = 0, \
>> - .max = (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
>> + .max = (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
>> .parents = { __VA_ARGS__ }, \
>> }
>>
>> -#define JH7100__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
>> +#define JH71X0__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = { \
>> .name = _name, \
>> .flags = _flags, \
>> - .max = JH7100_CLK_ENABLE | \
>> - (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
>> + .max = JH71X0_CLK_ENABLE | \
>> + (((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT) | (_max), \
>> .parents = { __VA_ARGS__ }, \
>> }
>>
>> -#define JH7100__INV(_idx, _name, _parent) [_idx] = { \
>> +#define JH71X0__INV(_idx, _name, _parent) [_idx] = { \
>> .name = _name, \
>> .flags = CLK_SET_RATE_PARENT, \
>> - .max = JH7100_CLK_INVERT, \
>> + .max = JH71X0_CLK_INVERT, \
>> .parents = { [0] = _parent }, \
>> }
>>
>> -struct jh7100_clk {
>> +struct jh71x0_clk {
>> struct clk_hw hw;
>> unsigned int idx;
>> unsigned int max_div;
>> };
>>
>> -struct jh7100_clk_priv {
>> +struct jh71x0_clk_priv {
>> /* protect clk enable and set rate/parent from happening at the same time */
>> spinlock_t rmw_lock;
>> struct device *dev;
>> void __iomem *base;
>> struct clk_hw *pll[3];
>> - struct jh7100_clk reg[];
>> + struct jh71x0_clk reg[];
>> };
>>
>> -const struct clk_ops *starfive_jh7100_clk_ops(u32 max);
>> +const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
>>
>> #endif
>> --
>> 2.38.1
>>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
2023-03-11 13:14 ` Conor Dooley
@ 2023-03-19 13:28 ` Hal Feng
0 siblings, 0 replies; 44+ messages in thread
From: Hal Feng @ 2023-03-19 13:28 UTC (permalink / raw)
To: Conor Dooley
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Palmer Dabbelt, Paul Walmsley, Albert Ou,
Ben Dooks, Daniel Lezcano, Thomas Gleixner, Marc Zyngier,
Emil Renner Berthing, linux-kernel
On Sat, 11 Mar 2023 13:14:45 +0000, Conor Dooley wrote:
> On Sat, Mar 11, 2023 at 05:07:24PM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Add bindings for the always-on clock and reset generator (AONCRG) on the
>> JH7110 RISC-V SoC by StarFive Ltd.
>>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
>> @@ -0,0 +1,107 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive JH7110 Always-On Clock and Reset Generator
>> +
>> +maintainers:
>> + - Emil Renner Berthing <kernel@esmil.dk>
>> +
>> +properties:
>> + compatible:
>> + const: starfive,jh7110-aoncrg
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + oneOf:
>> + - items:
>> + - description: Main Oscillator (24 MHz)
>> + - description: GMAC0 RMII reference or GMAC0 RGMII RX
>> + - description: STG AXI/AHB
>> + - description: APB Bus
>> + - description: GMAC0 GTX
>> +
>> + - items:
>> + - description: Main Oscillator (24 MHz)
>> + - description: GMAC0 RMII reference or GMAC0 RGMII RX
>> + - description: STG AXI/AHB or GMAC0 RGMII RX
>> + - description: APB Bus or STG AXI/AHB
>> + - description: GMAC0 GTX or APB Bus
>> + - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
>
> Something tells me that the use of "or" means we're not doing this
> correctly.
> Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
There are two possible cases when the number of clock inputs is 6:
Main Oscillator
GMAC0 RMII reference or GMAC0 RGMII RX
STG AXI/AHB
APB Bus
GMAC0 GTX
RTC Oscillator
and
Main Oscillator
GMAC0 RMII reference
GMAC0 RGMII RX
STG AXI/AHB
APB Bus
GMAC0 GTX
So I used the "or" in the items descriptions. Thanks.
Best regards,
Hal
>
>> + - items:
>> + - description: Main Oscillator (24 MHz)
>> + - description: GMAC0 RMII reference
>> + - description: GMAC0 RGMII RX
>> + - description: STG AXI/AHB
>> + - description: APB Bus
>> + - description: GMAC0 GTX
>> + - description: RTC Oscillator (32.768 kHz)
>> +
>> + clock-names:
>> + oneOf:
>> + - minItems: 5
>> + items:
>> + - const: osc
>> + - enum:
>> + - gmac0_rmii_refin
>> + - gmac0_rgmii_rxin
>> + - const: stg_axiahb
>> + - const: apb_bus
>> + - const: gmac0_gtxclk
>> + - const: rtc_osc
>> +
>> + - minItems: 6
>> + items:
>> + - const: osc
>> + - const: gmac0_rmii_refin
>> + - const: gmac0_rgmii_rxin
>> + - const: stg_axiahb
>> + - const: apb_bus
>> + - const: gmac0_gtxclk
>> + - const: rtc_osc
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-11 12:56 ` Conor Dooley
2023-03-14 14:34 ` Philipp Zabel
@ 2023-03-20 11:51 ` Emil Renner Berthing
2 siblings, 0 replies; 44+ messages in thread
From: Emil Renner Berthing @ 2023-03-20 11:51 UTC (permalink / raw)
To: Hal Feng
Cc: linux-clk, devicetree, linux-riscv, Stephen Boyd,
Michael Turquette, Philipp Zabel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Palmer Dabbelt, Paul Walmsley,
Albert Ou, Ben Dooks, Daniel Lezcano, Thomas Gleixner,
Marc Zyngier, linux-kernel
On Sat, 11 Mar 2023 at 10:07, Hal Feng <hal.feng@starfivetech.com> wrote:
>
> Using ARCH_FOO symbol is preferred than SOC_FOO.
>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Thanks!
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
> drivers/reset/Kconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 2a52c990d4fe..6ae5aa46a6b2 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -234,8 +234,8 @@ config RESET_SOCFPGA
>
> config RESET_STARFIVE_JH7100
> bool "StarFive JH7100 Reset Driver"
> - depends on SOC_STARFIVE || COMPILE_TEST
> - default SOC_STARFIVE
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + default ARCH_STARFIVE
> help
> This enables the reset controller driver for the StarFive JH7100 SoC.
>
> --
> 2.38.1
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2023-03-20 11:51 UTC | newest]
Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-11 9:07 [PATCH v5 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2023-03-11 9:07 ` [PATCH v5 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-11 12:56 ` Conor Dooley
2023-03-11 9:07 ` [PATCH v5 02/21] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2023-03-11 9:07 ` [PATCH v5 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng
2023-03-12 14:00 ` Conor Dooley
2023-03-13 2:37 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2023-03-16 19:05 ` Tommaso Merciai
2023-03-18 4:19 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-11 12:56 ` Conor Dooley
2023-03-14 14:34 ` Philipp Zabel
2023-03-20 11:51 ` Emil Renner Berthing
2023-03-11 9:07 ` [PATCH v5 06/21] reset: Create subdirectory for StarFive drivers Hal Feng
2023-03-14 14:34 ` Philipp Zabel
2023-03-17 8:17 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 07/21] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2023-03-11 9:07 ` [PATCH v5 08/21] reset: starfive: Extract the " Hal Feng
2023-03-11 9:07 ` [PATCH v5 09/21] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2023-03-11 9:07 ` [PATCH v5 10/21] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2023-03-11 9:07 ` [PATCH v5 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2023-03-11 13:11 ` Conor Dooley
2023-03-13 3:22 ` Hal Feng
2023-03-13 8:53 ` Emil Renner Berthing
2023-03-14 14:09 ` Hal Feng
2023-03-11 14:17 ` Rob Herring
2023-03-13 2:47 ` Hal Feng
2023-03-13 7:51 ` Krzysztof Kozlowski
2023-03-14 14:18 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2023-03-11 13:14 ` Conor Dooley
2023-03-19 13:28 ` Hal Feng
2023-03-11 14:18 ` Rob Herring
2023-03-13 2:49 ` Hal Feng
2023-03-11 9:07 ` [PATCH v5 13/21] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2023-03-11 9:07 ` [PATCH v5 14/21] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2023-03-11 9:07 ` [PATCH v5 15/21] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2023-03-11 9:07 ` [PATCH v5 16/21] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2023-03-11 9:07 ` [PATCH v5 17/21] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2023-03-11 9:07 ` [PATCH v5 18/21] dt-bindings: riscv: Add SiFive S7 compatible Hal Feng
2023-03-11 9:07 ` [PATCH v5 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
2023-03-11 9:07 ` [PATCH v5 20/21] riscv: dts: starfive: Add StarFive JH7110 pin function definitions Hal Feng
2023-03-11 9:07 ` [PATCH v5 21/21] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Hal Feng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).