Re: [PATCH 1/8] riscv/kprobe: Prepare the skeleton to implement RISCV OPTPROBES feature

[Conor Dooley <conor@kernel.org>]

On Tue, Nov 01, 2022 at 07:07:44PM +0800, liaochang (A) wrote:
> Hi，Conor,
> 
> 在 2022/11/1 3:42, Conor Dooley 写道:
> > Hey Chen Guokai,
> > 
> > On Sun, Oct 30, 2022 at 05:01:34PM +0800, Chen Guokai wrote:
> >> From: Liao Chang <liaochang1@huawei.com>
> >>
> >> Prepare skeleton to implement optimized kprobe on RISCV, it consists
> >> of Makfile, Kconfig and some architecture specific files: kprobe.h and
> >> opt.c opt.c includes some macro, type definition and functions required
> >> by kprobe framework, opt_trampoline.S provides a piece of assembly code
> >> template used to construct the detour buffer as the target of long jump
> >> instruction(s) for each optimzed kprobe.
> >>
> >> Since the jump range of PC-relative instruction JAL is +/-1M, that is
> >> too small to reach the detour buffer, hence the foudamental idea to
> >> address OPTPROBES on RISCV is to replace 'EBREAK' with 'AUIPC+JALR'. which
> >> means it needs to clobber one more instruction beside the kprobe
> >> instruction, furthermore, RISCV supports hybird RVI and RVC in single
> >> kernel binary, so in theory a pair of 'AUIPC/JALR' is about to clobber
> >> 10 bytes(3 RVC and 1 RVI, 2 bytes is padding for alignment) at worst
> >> case. The second hardsome problem is looking for one integer register as
> >> the destination of 'AUIPC/JALR' without any side-effect.
> >>
> >> More solution details will be introduced in the coming commits.
> > 
> > nit: you can drop this reference to future commits.
> > 
> >>
> >> Co-developed-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
> >> Signed-off-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
> >> Signed-off-by: Liao Chang <liaochang1@huawei.com>
> > 
> > FYI, your signoff should come last since you're sending the patches, so
> > this would become:
> > 
> >> Signed-off-by: Liao Chang <liaochang1@huawei.com>
> >> Co-developed-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
> >> Signed-off-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
> > 
> > I noticed on some of the other patches that your SoB is missing there,
> > for example patch 2.
> 
> Yes, i have sent patch 2 to mailing list long time ago, got some feedback from
> Palmer Debbelt. Because that patch is designed for riscv optprobe, so i bring it
> to this patchset.

Not sure if you understood the point I was making - you need to have a 
Signed-off-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
at the end of every patch that Chen sends. Patch 2 does not have one.
For the other patches, the order should be you, followed by Chen since
they are the one that sent the patch to the list this time.

See:
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#when-to-use-acked-by-cc-and-co-developed-by
Or:
Documentation/translations/zh_CN/process/submitting-patches.rst

In the zh_CN document, the relevant section is:
何时使用Acked-by:，CC:，和Co-Developed by:

Hope that helps,
Conor.

> >> ---
> >>  arch/riscv/Kconfig                        |  1 +
> >>  arch/riscv/include/asm/kprobes.h          | 32 ++++++++++++++
> >>  arch/riscv/kernel/probes/Makefile         |  1 +
> >>  arch/riscv/kernel/probes/opt.c            | 51 +++++++++++++++++++++++
> >>  arch/riscv/kernel/probes/opt_trampoline.S | 12 ++++++
> >>  5 files changed, 97 insertions(+)
> >>  create mode 100644 arch/riscv/kernel/probes/opt.c
> >>  create mode 100644 arch/riscv/kernel/probes/opt_trampoline.S
> >>
> >> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >> index 6b48a3ae9843..ca29306c93e2 100644
> >> --- a/arch/riscv/Kconfig
> >> +++ b/arch/riscv/Kconfig
> >> @@ -99,6 +99,7 @@ config RISCV
> >>  	select HAVE_KPROBES if !XIP_KERNEL
> >>  	select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
> >>  	select HAVE_KRETPROBES if !XIP_KERNEL
> >> +	select HAVE_OPTPROBES if !XIP_KERNEL
> >>  	select HAVE_MOVE_PMD
> >>  	select HAVE_MOVE_PUD
> >>  	select HAVE_PCI
> >> diff --git a/arch/riscv/include/asm/kprobes.h b/arch/riscv/include/asm/kprobes.h
> >> index 217ef89f22b9..22b73a2fd1fd 100644
> >> --- a/arch/riscv/include/asm/kprobes.h
> >> +++ b/arch/riscv/include/asm/kprobes.h
> >> @@ -43,5 +43,37 @@ bool kprobe_single_step_handler(struct pt_regs *regs);
> >>  void __kretprobe_trampoline(void);
> >>  void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
> >>  
> >> +#ifdef CONFIG_OPTPROBES
> >> +
> >> +/* optinsn template addresses */
> >> +extern __visible kprobe_opcode_t optprobe_template_entry[];
> >> +extern __visible kprobe_opcode_t optprobe_template_end[];
> >> +
> >> +#define MAX_OPTINSN_SIZE				\
> >> +	((unsigned long)optprobe_template_end -		\
> >> +	 (unsigned long)optprobe_template_entry)
> >> +
> >> +/*
> >> + * For RVI and RVC hybird encoding kernel, althought long jump just needs
> >> + * 2 RVI instructions(AUIPC+JALR), optimized instructions is 10 bytes long
> >> + * at most to ensure no RVI would be truncated actually, so it means four
> >> + * combinations:
> >> + * - 2 RVI
> >> + * - 4 RVC
> >> + * - 2 RVC + 1 RVI
> >> + * - 3 RVC + 1 RVI (truncated, need padding)
> >> + */
> >> +#define MAX_COPIED_INSN		4
> >> +#define MAX_OPTIMIZED_LENGTH	10
> >> +
> >> +struct arch_optimized_insn {
> >> +	kprobe_opcode_t copied_insn[MAX_COPIED_INSN];
> >> +	/* detour code buffer */
> >> +	kprobe_opcode_t *insn;
> >> +	unsigned long length;
> >> +	int rd;
> >> +};
> >> +
> >> +#endif /* CONFIG_OPTPROBES */
> >>  #endif /* CONFIG_KPROBES */
> >>  #endif /* _ASM_RISCV_KPROBES_H */
> >> diff --git a/arch/riscv/kernel/probes/Makefile b/arch/riscv/kernel/probes/Makefile
> >> index 7f0840dcc31b..6255b4600875 100644
> >> --- a/arch/riscv/kernel/probes/Makefile
> >> +++ b/arch/riscv/kernel/probes/Makefile
> >> @@ -3,4 +3,5 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o simulate-insn.o
> >>  obj-$(CONFIG_KPROBES)		+= kprobes_trampoline.o
> >>  obj-$(CONFIG_KPROBES_ON_FTRACE)	+= ftrace.o
> >>  obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o simulate-insn.o
> >> +obj-$(CONFIG_OPTPROBES)		+= opt.o opt_trampoline.o
> >>  CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE)
> >> diff --git a/arch/riscv/kernel/probes/opt.c b/arch/riscv/kernel/probes/opt.c
> >> new file mode 100644
> >> index 000000000000..56c8a227c857
> >> --- /dev/null
> >> +++ b/arch/riscv/kernel/probes/opt.c
> >> @@ -0,0 +1,51 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + *  Kernel Probes Jump Optimization (Optprobes)
> >> + *
> >> + * Copyright (C) Guokai Chen, 2022
> >> + * Author: Guokai Chen chenguokai17@mails.ucas.ac.cn
> >> + */
> >> +
> >> +#define pr_fmt(fmt)	"optprobe: " fmt
> >> +
> >> +#include <linux/kprobes.h>
> >> +#include <asm/kprobes.h>
> >> +
> >> +int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
> >> +{
> >> +	return 0;
> >> +}
> >> +
> >> +int arch_check_optimized_kprobe(struct optimized_kprobe *op)
> >> +{
> >> +	return 0;
> >> +}
> >> +
> >> +int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
> >> +				  struct kprobe *orig)
> >> +{
> >> +	return 0;
> >> +}
> >> +
> >> +void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
> >> +{
> >> +}
> >> +
> >> +void arch_optimize_kprobes(struct list_head *oplist)
> >> +{
> >> +}
> >> +
> >> +void arch_unoptimize_kprobes(struct list_head *oplist,
> >> +			     struct list_head *done_list)
> >> +{
> >> +}
> >> +
> >> +void arch_unoptimize_kprobe(struct optimized_kprobe *op)
> >> +{
> >> +}
> >> +
> >> +int arch_within_optimized_kprobe(struct optimized_kprobe *op,
> >> +				 kprobe_opcode_t *addr)
> >> +{
> >> +	return 0;
> >> +}
> >> diff --git a/arch/riscv/kernel/probes/opt_trampoline.S b/arch/riscv/kernel/probes/opt_trampoline.S
> >> new file mode 100644
> >> index 000000000000..16160c4367ff
> >> --- /dev/null
> >> +++ b/arch/riscv/kernel/probes/opt_trampoline.S
> >> @@ -0,0 +1,12 @@
> >> +/* SPDX-License-Identifier: GPL-2.0-only */
> >> +/*
> >> + * Copyright (C) 2022 Guokai Chen
> >> + */
> >> +
> >> +#include <linux/linkage.h>
> >> +
> >> +#incldue <asm/csr.h>
> >> +#include <asm/asm-offsets.h>
> >> +
> >> +SYM_ENTRY(optprobe_template_entry, SYM_L_GLOBAL, SYM_A_NONE)
> >> +SYM_ENTRY(optprobe_template_end, SYM_L_GLOBAL, SYM_A_NONE)
> >> -- 
> >> 2.25.1
> >>
> >>
> >> _______________________________________________
> >> linux-riscv mailing list
> >> linux-riscv@lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > .
> 
> -- 
> BR,
> Liao, Chang

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv