linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/3] clk: add driver for the SiFive FU540 PRCI and PLLs it controls
@ 2018-10-20 13:50 Paul Walmsley
  2018-10-20 13:50 ` Paul Walmsley
                   ` (2 more replies)
  0 siblings, 3 replies; 18+ messages in thread
From: Paul Walmsley @ 2018-10-20 13:50 UTC (permalink / raw)
  To: linux-riscv

Add a driver for the SiFive FU540 PRCI IP block, which handles clock and
some device reset control for the SiFive FU540 chip.  Also add a driver-
independent library for the Analog Bits Wide-Range PLL (WRPLL), used by
the PRCI driver to monitor and control the WRPLL instances on the FU540
chip.

It's been a long time since I've worked on Linux clock code, so Mike &
Stephen, I'd appreciate a close look at the PRCI driver to make sure
what it's doing makes sense.

Boot-tested on a SiFive HiFive Unleashed board.  COREPLL rate changes
and notification were also tested on the same board.

This second version corrects the DT binding documentation patch; an
out-of-date version of that patch was sent with the first version.

This patch series is also available at:

https://github.com/sifive/riscv-linux/tree/dev/paulw/prci-v4.19-rc7


Paul Walmsley (3):
  clk: analogbits: add Wide-Range PLL library
  dt-bindings: clk: add documentation for the SiFive PRCI driver
  clk: sifive: add a driver for the SiFive FU540 PRCI IP block

 .../bindings/clock/sifive/fu540-prci.txt      |  43 ++
 MAINTAINERS                                   |   6 +
 drivers/clk/Kconfig                           |   2 +
 drivers/clk/Makefile                          |   2 +
 drivers/clk/analogbits/Kconfig                |   3 +
 drivers/clk/analogbits/Makefile               |   2 +
 drivers/clk/analogbits/wrpll-cln28hpc.c       | 387 +++++++++++
 drivers/clk/sifive/Kconfig                    |  18 +
 drivers/clk/sifive/Makefile                   |   1 +
 drivers/clk/sifive/fu540-prci.c               | 634 ++++++++++++++++++
 include/linux/clk/analogbits-wrpll-cln28hpc.h |  99 +++
 include/linux/clk/sifive-fu540-prci.h         |  27 +
 12 files changed, 1224 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
 create mode 100644 drivers/clk/analogbits/Kconfig
 create mode 100644 drivers/clk/analogbits/Makefile
 create mode 100644 drivers/clk/analogbits/wrpll-cln28hpc.c
 create mode 100644 drivers/clk/sifive/Kconfig
 create mode 100644 drivers/clk/sifive/Makefile
 create mode 100644 drivers/clk/sifive/fu540-prci.c
 create mode 100644 include/linux/clk/analogbits-wrpll-cln28hpc.h
 create mode 100644 include/linux/clk/sifive-fu540-prci.h

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Wesley W. Terpstra <wesley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Megan Wachs <megan@sifive.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree at vger.kernel.org
Cc: linux-riscv at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-clk at vger.kernel.org

-- 
2.19.1

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2018-11-27 23:40 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-20 13:50 [PATCH v2 0/3] clk: add driver for the SiFive FU540 PRCI and PLLs it controls Paul Walmsley
2018-10-20 13:50 ` Paul Walmsley
2018-10-20 13:50 ` [PATCH v2 2/3] dt-bindings: clk: add documentation for the SiFive PRCI driver Paul Walmsley
2018-10-20 13:50   ` Paul Walmsley
2018-10-24 18:47   ` Rob Herring
2018-10-24 18:47     ` Rob Herring
2018-11-16 23:18     ` Paul Walmsley
2018-11-16 23:18       ` Paul Walmsley
2018-11-06 17:33   ` Stephen Boyd
2018-11-06 17:33     ` Stephen Boyd
2018-11-07  2:00     ` Paul Walmsley
2018-11-07  2:00       ` Paul Walmsley
2018-10-20 13:50 ` [PATCH v2 3/3] clk: sifive: add a driver for the SiFive FU540 PRCI IP block Paul Walmsley
2018-10-20 13:50   ` Paul Walmsley
2018-11-21 16:35   ` Stephen Boyd
2018-11-21 16:35     ` Stephen Boyd
2018-11-27 23:24     ` Paul Walmsley
2018-11-27 23:24       ` Paul Walmsley

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).