linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Paul Walmsley <paul.walmsley@sifive.com>
To: linux-riscv@lists.infradead.org
Cc: krste@berkeley.edu, aou@eecs.berkeley.edu,
	waterman@eecs.berkeley.edu, corbet@lwn.net,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	palmer@dabbelt.com
Subject: [PATCH] Documentation: riscv: add patch acceptance guidelines
Date: Fri, 22 Nov 2019 18:44:39 -0800 (PST)	[thread overview]
Message-ID: <alpine.DEB.2.21.9999.1911221842200.14532@viisi.sifive.com> (raw)


Formalize, in kernel documentation, the patch acceptance policy for 
arch/riscv.  In summary, it states that as maintainers, we plan to only 
accept patches for new modules or extensions that have been frozen or 
ratified by the RISC-V Foundation.

We've been following these guidelines for the past few months.  In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
---
 Documentation/riscv/patch-acceptance.rst | 32 ++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/riscv/patch-acceptance.rst

diff --git a/Documentation/riscv/patch-acceptance.rst b/Documentation/riscv/patch-acceptance.rst
new file mode 100644
index 000000000000..2e658353b53c
--- /dev/null
+++ b/Documentation/riscv/patch-acceptance.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================================
+arch/riscv maintenance and the RISC-V specifications
+====================================================
+
+The RISC-V instruction set architecture is developed in the open:
+in-progress drafts are available for all to review and to experiment
+with implementations.  New module or extension drafts can change
+during the development process - sometimes in ways that are
+incompatible with previous drafts.  This flexibility can present a
+challenge for RISC-V Linux maintenance.  Linux maintainers disapprove
+of churn, and the Linux development process prefers well-reviewed and
+tested code over experimental code.  We wish to extend these same
+principles to the RISC-V-related code that will be accepted for
+inclusion in the kernel.
+
+Therefore, as maintainers, we'll only accept patches for new modules
+or extensions if the specifications for those modules or extensions
+are listed as being "Frozen" or "Ratified" by the RISC-V Foundation.
+(Developers may, of course, maintain their own Linux kernel trees that
+contain code for any draft extensions that they wish.)
+
+Additionally, the RISC-V specification allows implementors to create
+their own custom extensions.  These custom extensions aren't required
+to go through any review or ratification process by the RISC-V
+Foundation.  To avoid the maintenance complexity and potential
+performance impact of adding kernel code for implementor-specific
+RISC-V extensions, we'll only to accept patches for extensions that
+have been officially frozen or ratified by the RISC-V Foundation.
+(Implementors, may, of course, maintain their own Linux kernel trees
+containing code for any custom extensions that they wish.)
-- 
2.24.0.rc0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2019-11-23  2:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-23  2:44 Paul Walmsley [this message]
2019-11-23  3:58 ` [PATCH] Documentation: riscv: add patch acceptance guidelines Matthew Wilcox
2019-11-23 23:38   ` Paul Walmsley
2019-11-23 16:39 ` Jonathan Corbet
2019-11-23 23:27   ` Paul Walmsley
2019-11-23 23:35     ` Dan Williams
2019-11-23 23:49       ` Paul Walmsley
2019-11-24  0:01         ` Dan Williams
2019-11-24  0:42           ` Paul Walmsley
2019-11-24  3:38             ` Dan Williams
2019-11-25  2:48               ` Paul Walmsley
2019-11-25  3:20                 ` Dan Williams
2019-11-25 15:57                 ` Jonathan Corbet
2019-11-23 18:29 ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.21.9999.1911221842200.14532@viisi.sifive.com \
    --to=paul.walmsley@sifive.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=corbet@lwn.net \
    --cc=krste@berkeley.edu \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=waterman@eecs.berkeley.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).