Re: [PATCH v7 1/4] mtd: spi-nor: add support for is25wp256

From: Vignesh Raghavendra <vigneshr@ti.com>
To: Sagar Shrikant Kadam <sagar.kadam@sifive.com>,
	<marek.vasut@gmail.com>, <tudor.ambarus@microchip.com>,
	<dwmw2@infradead.org>, <computersforpeace@gmail.com>,
	<miquel.raynal@bootlin.com>, <richard@nod.at>
Cc: aou@eecs.berkeley.edu, palmer@sifive.com,
	linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
	paul.walmsley@sifive.com, linux-riscv@lists.infradead.org
Subject: Re: [PATCH v7 1/4] mtd: spi-nor: add support for is25wp256
Date: Fri, 9 Aug 2019 17:04:29 +0530	[thread overview]
Message-ID: <c193950a-ddd9-cf8e-0694-eeb91b994729@ti.com> (raw)
In-Reply-To: <1562092745-11541-2-git-send-email-sagar.kadam@sifive.com>


On 03/07/19 12:09 AM, Sagar Shrikant Kadam wrote:
> Update spi_nor_id table for is25wp256 (32MB) device from ISSI,
> present on HiFive Unleashed dev board (Rev: A00).
> 
> Set method to enable quad mode for ISSI device in flash parameters
> table.
> 
> Based on code originally written by Wesley Terpstra <wesley@sifive.com>
> and/or Palmer Dabbelt <palmer@sifive.com>
> https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b
> 
> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>


>  drivers/mtd/spi-nor/spi-nor.c | 9 ++++++++-
>  include/linux/mtd/spi-nor.h   | 1 +
>  2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index e3a28c0..971f0f3 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1857,7 +1857,10 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> -
> +	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 1024,
> +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +			SPI_NOR_4B_OPCODES)
> +	},
>  	/* Macronix */
>  	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
>  	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
> @@ -3687,6 +3690,10 @@ static int spi_nor_init_params(struct spi_nor *nor,
>  		case SNOR_MFR_ST:
>  		case SNOR_MFR_MICRON:
>  			break;
> +		case SNOR_MFR_ISSI:
> +			params->quad_enable = macronix_quad_enable;
> +			break;
> +
>  
>  		default:
>  			/* Kept only for backward compatibility purpose. */
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index b3d360b..b0e42b3 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -21,6 +21,7 @@
>  #define SNOR_MFR_INTEL		CFI_MFR_INTEL
>  #define SNOR_MFR_ST		CFI_MFR_ST	/* ST Micro */
>  #define SNOR_MFR_MICRON		CFI_MFR_MICRON	/* Micron */
> +#define SNOR_MFR_ISSI		0x9d		/* ISSI */
>  #define SNOR_MFR_MACRONIX	CFI_MFR_MACRONIX
>  #define SNOR_MFR_SPANSION	CFI_MFR_AMD
>  #define SNOR_MFR_SST		CFI_MFR_SST
> 

-- 
Regards
Vignesh

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv