* [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
@ 2022-09-20 14:34 Nicolas Frattaroli
2022-09-22 21:22 ` Dan Johansen
2022-09-23 10:33 ` Heiko Stuebner
0 siblings, 2 replies; 6+ messages in thread
From: Nicolas Frattaroli @ 2022-09-20 14:34 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner
Cc: Nicolas Frattaroli, devicetree, linux-arm-kernel, linux-rockchip,
linux-kernel
This enables the GPU and HDMI output (including HDMI audio) on
the PINE64 Quartz64 Model B single board computer.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
---
.../boot/dts/rockchip/rk3566-quartz64-b.dts | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 0f623198970f..77b179cd20e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
@@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
#clock-cells = <0>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -183,6 +195,33 @@ &gmac1m1_clkinout
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -456,6 +495,10 @@ &i2c5 {
status = "disabled";
};
+&i2s0_8ch {
+ status = "okay";
+};
+
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
@@ -677,3 +720,20 @@ &usb_host0_ehci {
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
--
2.37.3
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
2022-09-20 14:34 [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b Nicolas Frattaroli
@ 2022-09-22 21:22 ` Dan Johansen
2022-09-23 9:45 ` Heiko Stuebner
2022-09-23 10:33 ` Heiko Stuebner
1 sibling, 1 reply; 6+ messages in thread
From: Dan Johansen @ 2022-09-22 21:22 UTC (permalink / raw)
To: Nicolas Frattaroli, Rob Herring, Krzysztof Kozlowski, Heiko Stuebner
Cc: devicetree, linux-arm-kernel, linux-rockchip, linux-kernel
This seems to be based against linux-next and not mainline. It fails to
apply on mainline for me.
Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
> This enables the GPU and HDMI output (including HDMI audio) on
> the PINE64 Quartz64 Model B single board computer.
>
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> ---
> .../boot/dts/rockchip/rk3566-quartz64-b.dts | 60 +++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> index 0f623198970f..77b179cd20e7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> @@ -4,6 +4,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include "rk3566.dtsi"
>
> / {
> @@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
> #clock-cells = <0>;
> };
>
> + hdmi-con {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -183,6 +195,33 @@ &gmac1m1_clkinout
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + avdd-0v9-supply = <&vdda0v9_image>;
> + avdd-1v8-supply = <&vcca1v8_image>;
> + status = "okay";
> +};
> +
> +&hdmi_in {
> + hdmi_in_vp0: endpoint {
> + remote-endpoint = <&vp0_out_hdmi>;
> + };
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
> &i2c0 {
> status = "okay";
>
> @@ -456,6 +495,10 @@ &i2c5 {
> status = "disabled";
> };
>
> +&i2s0_8ch {
> + status = "okay";
> +};
> +
> &i2s1_8ch {
> pinctrl-names = "default";
> pinctrl-0 = <&i2s1m0_sclktx
The above part does not seem to exist in the current mainline (rc6) git
repo.
> @@ -677,3 +720,20 @@ &usb_host0_ehci {
> &usb_host0_ohci {
> status = "okay";
> };
> +
> +&vop {
> + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> + status = "okay";
> +};
> +
> +&vop_mmu {
> + status = "okay";
> +};
> +
> +&vp0 {
> + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> + remote-endpoint = <&hdmi_in_vp0>;
> + };
> +};
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
2022-09-22 21:22 ` Dan Johansen
@ 2022-09-23 9:45 ` Heiko Stuebner
2022-09-23 9:53 ` Dan Johansen
0 siblings, 1 reply; 6+ messages in thread
From: Heiko Stuebner @ 2022-09-23 9:45 UTC (permalink / raw)
To: Nicolas Frattaroli, Rob Herring, Krzysztof Kozlowski, Dan Johansen
Cc: devicetree, linux-arm-kernel, linux-rockchip, linux-kernel
Hi,
Am Donnerstag, 22. September 2022, 23:22:37 CEST schrieb Dan Johansen:
> This seems to be based against linux-next and not mainline. It fails to
> apply on mainline for me.
I would not expect things any other way though :-) .
I.e. in the current cycle everything new is of course targetting
v6.1 and the Quartz boards already saw some other changes.
> Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
> > This enables the GPU and HDMI output (including HDMI audio) on
> > the PINE64 Quartz64 Model B single board computer.
> >
> > Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> > ---
> > .../boot/dts/rockchip/rk3566-quartz64-b.dts | 60 +++++++++++++++++++
> > 1 file changed, 60 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> > index 0f623198970f..77b179cd20e7 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> > @@ -4,6 +4,7 @@
> >
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > #include "rk3566.dtsi"
> >
> > / {
> > @@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
> > #clock-cells = <0>;
> > };
> >
> > + hdmi-con {
> > + compatible = "hdmi-connector";
> > + type = "a";
> > +
> > + port {
> > + hdmi_con_in: endpoint {
> > + remote-endpoint = <&hdmi_out_con>;
> > + };
> > + };
> > + };
> > +
> > leds {
> > compatible = "gpio-leds";
> >
> > @@ -183,6 +195,33 @@ &gmac1m1_clkinout
> > status = "okay";
> > };
> >
> > +&gpu {
> > + mali-supply = <&vdd_gpu>;
> > + status = "okay";
> > +};
> > +
> > +&hdmi {
> > + avdd-0v9-supply = <&vdda0v9_image>;
> > + avdd-1v8-supply = <&vcca1v8_image>;
> > + status = "okay";
> > +};
> > +
> > +&hdmi_in {
> > + hdmi_in_vp0: endpoint {
> > + remote-endpoint = <&vp0_out_hdmi>;
> > + };
> > +};
> > +
> > +&hdmi_out {
> > + hdmi_out_con: endpoint {
> > + remote-endpoint = <&hdmi_con_in>;
> > + };
> > +};
> > +
> > +&hdmi_sound {
> > + status = "okay";
> > +};
> > +
> > &i2c0 {
> > status = "okay";
> >
> > @@ -456,6 +495,10 @@ &i2c5 {
> > status = "disabled";
> > };
> >
> > +&i2s0_8ch {
> > + status = "okay";
> > +};
> > +
> > &i2s1_8ch {
> > pinctrl-names = "default";
> > pinctrl-0 = <&i2s1m0_sclktx
> The above part does not seem to exist in the current mainline (rc6) git
> repo.
which is of course already in linux-next, so this
patch just applied nicely.
Heiko
> > @@ -677,3 +720,20 @@ &usb_host0_ehci {
> > &usb_host0_ohci {
> > status = "okay";
> > };
> > +
> > +&vop {
> > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> > + status = "okay";
> > +};
> > +
> > +&vop_mmu {
> > + status = "okay";
> > +};
> > +
> > +&vp0 {
> > + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> > + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> > + remote-endpoint = <&hdmi_in_vp0>;
> > + };
> > +};
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
2022-09-23 9:45 ` Heiko Stuebner
@ 2022-09-23 9:53 ` Dan Johansen
2022-09-23 10:02 ` Heiko Stuebner
0 siblings, 1 reply; 6+ messages in thread
From: Dan Johansen @ 2022-09-23 9:53 UTC (permalink / raw)
To: Heiko Stuebner, Nicolas Frattaroli, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-kernel, linux-rockchip, linux-kernel
Den 23.09.2022 kl. 11.45 skrev Heiko Stuebner:
> Hi,
>
> Am Donnerstag, 22. September 2022, 23:22:37 CEST schrieb Dan Johansen:
>> This seems to be based against linux-next and not mainline. It fails to
>> apply on mainline for me.
> I would not expect things any other way though :-) .
> I.e. in the current cycle everything new is of course targetting
> v6.1 and the Quartz boards already saw some other changes.
Ah okay. I have misunderstood the submitting process then.
I was under the impression that a patch should always target the latest
-rc1, in this case 6.0-rc1.
I did not know that when you are at rc6/rc7 it's okay to target
linux-next without
mentioning it.
Sorry for my noise.
>
>
>> Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
>>> This enables the GPU and HDMI output (including HDMI audio) on
>>> the PINE64 Quartz64 Model B single board computer.
>>>
>>> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
>>> ---
>>> .../boot/dts/rockchip/rk3566-quartz64-b.dts | 60 +++++++++++++++++++
>>> 1 file changed, 60 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
>>> index 0f623198970f..77b179cd20e7 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
>>> @@ -4,6 +4,7 @@
>>>
>>> #include <dt-bindings/gpio/gpio.h>
>>> #include <dt-bindings/pinctrl/rockchip.h>
>>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>> #include "rk3566.dtsi"
>>>
>>> / {
>>> @@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
>>> #clock-cells = <0>;
>>> };
>>>
>>> + hdmi-con {
>>> + compatible = "hdmi-connector";
>>> + type = "a";
>>> +
>>> + port {
>>> + hdmi_con_in: endpoint {
>>> + remote-endpoint = <&hdmi_out_con>;
>>> + };
>>> + };
>>> + };
>>> +
>>> leds {
>>> compatible = "gpio-leds";
>>>
>>> @@ -183,6 +195,33 @@ &gmac1m1_clkinout
>>> status = "okay";
>>> };
>>>
>>> +&gpu {
>>> + mali-supply = <&vdd_gpu>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&hdmi {
>>> + avdd-0v9-supply = <&vdda0v9_image>;
>>> + avdd-1v8-supply = <&vcca1v8_image>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&hdmi_in {
>>> + hdmi_in_vp0: endpoint {
>>> + remote-endpoint = <&vp0_out_hdmi>;
>>> + };
>>> +};
>>> +
>>> +&hdmi_out {
>>> + hdmi_out_con: endpoint {
>>> + remote-endpoint = <&hdmi_con_in>;
>>> + };
>>> +};
>>> +
>>> +&hdmi_sound {
>>> + status = "okay";
>>> +};
>>> +
>>> &i2c0 {
>>> status = "okay";
>>>
>>> @@ -456,6 +495,10 @@ &i2c5 {
>>> status = "disabled";
>>> };
>>>
>>> +&i2s0_8ch {
>>> + status = "okay";
>>> +};
>>> +
>>> &i2s1_8ch {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2s1m0_sclktx
>> The above part does not seem to exist in the current mainline (rc6) git
>> repo.
> which is of course already in linux-next, so this
> patch just applied nicely.
>
>
> Heiko
>
>>> @@ -677,3 +720,20 @@ &usb_host0_ehci {
>>> &usb_host0_ohci {
>>> status = "okay";
>>> };
>>> +
>>> +&vop {
>>> + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
>>> + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&vop_mmu {
>>> + status = "okay";
>>> +};
>>> +
>>> +&vp0 {
>>> + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
>>> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
>>> + remote-endpoint = <&hdmi_in_vp0>;
>>> + };
>>> +};
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
2022-09-23 9:53 ` Dan Johansen
@ 2022-09-23 10:02 ` Heiko Stuebner
0 siblings, 0 replies; 6+ messages in thread
From: Heiko Stuebner @ 2022-09-23 10:02 UTC (permalink / raw)
To: Nicolas Frattaroli, Rob Herring, Krzysztof Kozlowski, Dan Johansen
Cc: devicetree, linux-arm-kernel, linux-rockchip, linux-kernel
Hi,
Am Freitag, 23. September 2022, 11:53:52 CEST schrieb Dan Johansen:
>
> Den 23.09.2022 kl. 11.45 skrev Heiko Stuebner:
> > Hi,
> >
> > Am Donnerstag, 22. September 2022, 23:22:37 CEST schrieb Dan Johansen:
> >> This seems to be based against linux-next and not mainline. It fails to
> >> apply on mainline for me.
> > I would not expect things any other way though :-) .
> > I.e. in the current cycle everything new is of course targetting
> > v6.1 and the Quartz boards already saw some other changes.
>
> Ah okay. I have misunderstood the submitting process then.
>
> I was under the impression that a patch should always target the latest
> -rc1, in this case 6.0-rc1.
>
> I did not know that when you are at rc6/rc7 it's okay to target
> linux-next without
> mentioning it.
>
> Sorry for my noise.
no worries - just to clarify a bit more, the issue gets slightly
more complex :-) .
I.e. patches should always target the maintainer-branch you're expecting
them getting applied to. During the whole development cycle there is a
lot of movement happening in each maintainer tree, so targetting some
completely separate rc-kernel won't really make sense.
Most of the time targetting -rc1 might work in the beginning, but when
there are other changes already applied you need to take these into
account too.
Heiko
> >> Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
> >>> This enables the GPU and HDMI output (including HDMI audio) on
> >>> the PINE64 Quartz64 Model B single board computer.
> >>>
> >>> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> >>> ---
> >>> .../boot/dts/rockchip/rk3566-quartz64-b.dts | 60 +++++++++++++++++++
> >>> 1 file changed, 60 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> index 0f623198970f..77b179cd20e7 100644
> >>> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> @@ -4,6 +4,7 @@
> >>>
> >>> #include <dt-bindings/gpio/gpio.h>
> >>> #include <dt-bindings/pinctrl/rockchip.h>
> >>> +#include <dt-bindings/soc/rockchip,vop2.h>
> >>> #include "rk3566.dtsi"
> >>>
> >>> / {
> >>> @@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
> >>> #clock-cells = <0>;
> >>> };
> >>>
> >>> + hdmi-con {
> >>> + compatible = "hdmi-connector";
> >>> + type = "a";
> >>> +
> >>> + port {
> >>> + hdmi_con_in: endpoint {
> >>> + remote-endpoint = <&hdmi_out_con>;
> >>> + };
> >>> + };
> >>> + };
> >>> +
> >>> leds {
> >>> compatible = "gpio-leds";
> >>>
> >>> @@ -183,6 +195,33 @@ &gmac1m1_clkinout
> >>> status = "okay";
> >>> };
> >>>
> >>> +&gpu {
> >>> + mali-supply = <&vdd_gpu>;
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> +&hdmi {
> >>> + avdd-0v9-supply = <&vdda0v9_image>;
> >>> + avdd-1v8-supply = <&vcca1v8_image>;
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> +&hdmi_in {
> >>> + hdmi_in_vp0: endpoint {
> >>> + remote-endpoint = <&vp0_out_hdmi>;
> >>> + };
> >>> +};
> >>> +
> >>> +&hdmi_out {
> >>> + hdmi_out_con: endpoint {
> >>> + remote-endpoint = <&hdmi_con_in>;
> >>> + };
> >>> +};
> >>> +
> >>> +&hdmi_sound {
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> &i2c0 {
> >>> status = "okay";
> >>>
> >>> @@ -456,6 +495,10 @@ &i2c5 {
> >>> status = "disabled";
> >>> };
> >>>
> >>> +&i2s0_8ch {
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> &i2s1_8ch {
> >>> pinctrl-names = "default";
> >>> pinctrl-0 = <&i2s1m0_sclktx
> >> The above part does not seem to exist in the current mainline (rc6) git
> >> repo.
> > which is of course already in linux-next, so this
> > patch just applied nicely.
> >
> >
> > Heiko
> >
> >>> @@ -677,3 +720,20 @@ &usb_host0_ehci {
> >>> &usb_host0_ohci {
> >>> status = "okay";
> >>> };
> >>> +
> >>> +&vop {
> >>> + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> >>> + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> +&vop_mmu {
> >>> + status = "okay";
> >>> +};
> >>> +
> >>> +&vp0 {
> >>> + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> >>> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> >>> + remote-endpoint = <&hdmi_in_vp0>;
> >>> + };
> >>> +};
> >
> >
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
2022-09-20 14:34 [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b Nicolas Frattaroli
2022-09-22 21:22 ` Dan Johansen
@ 2022-09-23 10:33 ` Heiko Stuebner
1 sibling, 0 replies; 6+ messages in thread
From: Heiko Stuebner @ 2022-09-23 10:33 UTC (permalink / raw)
To: Nicolas Frattaroli, Rob Herring, Krzysztof Kozlowski
Cc: Heiko Stuebner, devicetree, linux-kernel, linux-rockchip,
linux-arm-kernel
On Tue, 20 Sep 2022 16:34:46 +0200, Nicolas Frattaroli wrote:
> This enables the GPU and HDMI output (including HDMI audio) on
> the PINE64 Quartz64 Model B single board computer.
Applied, thanks!
[1/1] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
commit: d99efdaba9027bf70a4f78f42c0ddc0639e0918d
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-09-23 10:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-20 14:34 [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b Nicolas Frattaroli
2022-09-22 21:22 ` Dan Johansen
2022-09-23 9:45 ` Heiko Stuebner
2022-09-23 9:53 ` Dan Johansen
2022-09-23 10:02 ` Heiko Stuebner
2022-09-23 10:33 ` Heiko Stuebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).