From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
Cc: Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v3 5/5] rockchip: rk3399: Add bootcount support
Date: Mon, 30 Dec 2019 00:37:26 +0530 [thread overview]
Message-ID: <20191229190726.29266-6-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191229190726.29266-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add bootcount support for Rockchip rk3399.
The bootcount value is preserved in PMU_SYS_REG0 register,
this would help to support redundent boot.
Once the redundant boot triggers, the altboot command
will look for extlinux-rollback.conf on particular
bootable partition which supposed to be a recovery
partition where redundant boot required.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/mach-rockchip/Kconfig | 2 ++
arch/arm/mach-rockchip/rk3399/Kconfig | 10 ++++++++++
include/configs/rk3399_common.h | 5 ++++-
3 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index d8d68ba447..9a3c65ec58 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -244,6 +244,8 @@ config ROCKCHIP_RK3399
imply TPL_CLK
imply TPL_TINY_MEMSET
imply TPL_ROCKCHIP_COMMON_BOARD
+ imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT
+ imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT
help
The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
and quad-core Cortex-A53.
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 868e85fc2a..f994152803 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -113,6 +113,16 @@ config TPL_TEXT_BASE
config SPL_STACK_R_ADDR
default 0x04000000
+if BOOTCOUNT_LIMIT
+
+config BOOTCOUNT_BOOTLIMIT
+ default 3
+
+config SYS_BOOTCOUNT_ADDR
+ default 0xff3100f0 # PMU_SYS_REG0
+
+endif # BOOTCOUNT_LIMIT
+
source "board/rockchip/evb_rk3399/Kconfig"
source "board/theobroma-systems/puma_rk3399/Kconfig"
source "board/vamrs/rock960_rk3399/Kconfig"
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 127ca1f09c..89a8a44bbe 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -63,7 +63,10 @@
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
ROCKCHIP_DEVICE_SETTINGS \
- BOOTENV
+ BOOTENV \
+ "altbootcmd=" \
+ "setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \
+ "run distro_bootcmd\0"
#endif
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-12-29 19:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-29 19:07 [PATCH v3 0/5] rk3399: Add redundant boot support Jagan Teki
[not found] ` <20191229190726.29266-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-12-29 19:07 ` [PATCH v3 1/5] rockchip: Add cpu-info Jagan Teki
2019-12-29 19:07 ` [PATCH v3 2/5] rockchip: rk3399: Enable DISPLAY_CPUINFO Jagan Teki
2020-01-06 9:23 ` Kever Yang
2019-12-29 19:07 ` [PATCH v3 3/5] arm: rockchip: Add common cru.h Jagan Teki
2020-01-06 9:24 ` Kever Yang
2019-12-29 19:07 ` [PATCH v3 4/5] rockchip: Add common reset cause Jagan Teki
2020-01-06 9:24 ` Kever Yang
2019-12-29 19:07 ` Jagan Teki [this message]
[not found] ` <20191229190726.29266-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2020-01-06 9:25 ` [PATCH v3 5/5] rockchip: rk3399: Add bootcount support Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191229190726.29266-6-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).