From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Sandy Huang <hjc@rock-chips.com>
Cc: Jonas Karlman <jonas@kwiboo.se>,
Kishon Vijay Abraham I <kishon@ti.com>,
Zheng Yang <zhengyang@rock-chips.com>,
linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 09/14] arm64: dts: rockchip: increase vop clock rate on rk3328
Date: Wed, 08 Jan 2020 21:07:51 +0000 (UTC) [thread overview]
Message-ID: <20200108210740.28769-10-jonas@kwiboo.se> (raw)
In-Reply-To: <20200108210740.28769-1-jonas@kwiboo.se>
The VOP on RK3328 needs to run at higher rate in order to
produce a proper 3840x2160 signal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index c9ff1188bd7b..fee896338cc1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -803,8 +803,8 @@
<0>, <24000000>,
<24000000>, <24000000>,
<15000000>, <15000000>,
- <100000000>, <100000000>,
- <100000000>, <100000000>,
+ <300000000>, <100000000>,
+ <400000000>, <100000000>,
<50000000>, <100000000>,
<100000000>, <100000000>,
<50000000>, <50000000>,
--
2.17.1
next prev parent reply other threads:[~2020-01-08 21:07 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 21:07 [PATCH v2 00/14] Support more HDMI modes on RK3228/RK3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 01/14] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 03/14] phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 02/14] phy/rockchip: inno-hdmi: round fractal pixclock in " Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 04/14] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 06/14] drm/rockchip: dw-hdmi: allow high tmds bit rates Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 05/14] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 08/14] clk: rockchip: set parent rate for DCLK_VOP clock on rk3228 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 07/14] drm/rockchip: dw-hdmi: require valid vpll clock rate on rk3228/rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 10/14] arm64: dts: rockchip: add vpll clock to hdmi node on rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 11/14] ARM: dts: rockchip: add vpll clock to hdmi node on rk3228 Jonas Karlman
2020-01-08 21:07 ` Jonas Karlman [this message]
2020-01-08 21:07 ` [PATCH v2 12/14] drm/rockchip: dw-hdmi: limit tmds to 340mhz on rk3228/rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 13/14] drm/rockchip: dw-hdmi: remove unused plat_data " Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 14/14] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-07-07 19:53 ` Johan Jonker
2020-07-07 21:05 ` Jonas Karlman
2020-01-10 11:01 ` [PATCH v2 00/14] Support more HDMI modes on RK3228/RK3328 Kishon Vijay Abraham I
[not found] ` <b159ee28-213e-35d2-6d09-516abc3358bb-l0cyMroinI0@public.gmane.org>
2020-01-10 16:56 ` Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 0/6] " Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 1/6] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 2/6] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 4/6] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 3/6] phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 6/6] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 5/6] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200108210740.28769-10-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=zhengyang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).