From: Suniel Mahesh <sunil@amarulasolutions.com>
To: kever.yang@rock-chips.com, philipp.tomsich@theobroma-systems.com,
sjg@chromium.org
Cc: u-boot@lists.denx.de, linux-rockchip@lists.infradead.org,
linux-amarula@amarulasolutions.com, jagan@amarulasolutions.com,
sunil@amarulasolutions.com
Subject: [PATCH v2 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0
Date: Mon, 14 Sep 2020 21:06:33 +0530 [thread overview]
Message-ID: <20200914153634.18121-7-sunil@amarulasolutions.com> (raw)
In-Reply-To: <20200914153634.18121-1-sunil@amarulasolutions.com>
From: Jagan Teki <jagan@amarulasolutions.com>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
Changes for v2:
- Minor device tree adjustments as per Linux mainline changes
- rename device tree from ctouch2-of10.dts to ctouch2.dts
- rename defconfig from ctouch2-of10 to ctouch2
- collect Kever Yang r-b tag
- Add additional copyright
arch/arm/dts/Makefile | 1 +
arch/arm/dts/px30-px30-core-ctouch2.dts | 22 +++++
arch/arm/mach-rockchip/px30/Kconfig | 7 ++
board/rockchip/evb_px30/MAINTAINERS | 6 ++
configs/px30-core-ctouch2-px30_defconfig | 108 +++++++++++++++++++++++
5 files changed, 144 insertions(+)
create mode 100644 arch/arm/dts/px30-px30-core-ctouch2.dts
create mode 100644 configs/px30-core-ctouch2-px30_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f1b0286fa1..1ffa07cc6e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
+ px30-px30-core-ctouch2.dtb \
px30-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-px30-core-ctouch2.dts
new file mode 100644
index 0000000000..2da0128188
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core C.TOUCH 2.0";
+ compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 98959fbf53..507a54af58 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -14,6 +14,13 @@ config TARGET_EVB_PX30
* PX30.Core needs to mount on top of EDIMM2.2 for creating complete
PX30.Core EDIMM2.2 Starter Kit.
+ PX30.Core CTOUCH2:
+ * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+ * CTOUCH2.0 is a general purpose Carrier board with capacitive
+ touch interface support.
+ * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
+ PX30.Core C.TOUCH Carrier board.
+
config TARGET_ODROID_GO2
bool "ODROID_GO2"
diff --git a/board/rockchip/evb_px30/MAINTAINERS b/board/rockchip/evb_px30/MAINTAINERS
index 48fba4e046..2634a0aa8d 100644
--- a/board/rockchip/evb_px30/MAINTAINERS
+++ b/board/rockchip/evb_px30/MAINTAINERS
@@ -11,3 +11,9 @@ M: Jagan Teki <jagan@amarulasolutions.com>
M: Suniel Mahesh <sunil@amarulasolutions.com>
S: Maintained
F: configs/px30-core-edimm2.2-px30_defconfig
+
+PX30-Core-CTOUCH2.0
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Suniel Mahesh <sunil@amarulasolutions.com>
+S: Maintained
+F: configs/px30-core-ctouch2-px30_defconfig
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
new file mode 100644
index 0000000000..ea3c9c85c1
--- /dev/null
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_EVB_PX30=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
+# CONFIG_EFI_LOADER is not set
--
2.17.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2020-09-14 15:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-14 15:36 [PATCH v2 0/7] rockchip: Add Engicam PX30.Core support Suniel Mahesh
2020-09-14 15:36 ` [PATCH v2 1/7] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit Suniel Mahesh
2020-09-14 15:36 ` [PATCH v2 2/7] arm64: dts: rockchip: Add Engicam PX30.Core SOM Suniel Mahesh
2020-09-14 15:36 ` [PATCH v2 3/7] rockchip: px30: Add EVB_PX30 Kconfig help Suniel Mahesh
2020-09-14 15:36 ` [PATCH v2 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit Suniel Mahesh
2020-09-14 15:36 ` [PATCH v2 5/7] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 Suniel Mahesh
2020-09-14 15:36 ` Suniel Mahesh [this message]
2020-09-14 15:36 ` [PATCH v2 7/7] doc: rockchip: Document Rockchip miniloader flashing Suniel Mahesh
2020-09-28 2:39 ` [PATCH v2 0/7] rockchip: Add Engicam PX30.Core support Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200914153634.18121-7-sunil@amarulasolutions.com \
--to=sunil@amarulasolutions.com \
--cc=jagan@amarulasolutions.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=philipp.tomsich@theobroma-systems.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).