On Sat, Sep 04, 2021 at 01:15:34AM +0200, Nicolas Frattaroli wrote:

> +  rockchip,frame-width:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 64
> +    minimum: 32
> +    maximum: 512
> +    description:
> +      Width of a frame, usually slot width multiplied by number of slots.
> +      Must be even.

Why is this in the binding?  This is normally configured by the machine
driver setting the TDM slots, not through DT.

> +  rockchip,mclk-calibrate:
> +    description:
> +      Switch between two root clocks depending on the audio sample rate.
> +      For integer multiples of 8000 (e.g. 48000 Hz), mclk_root0 is used.
> +      For integer multiples of 11025 (e.g. 44100 Hz), mclk_root1 is used.
> +    type: boolean

Why would we not want to do this, and assuming it's to do with
availability can't we detect it simply through seeing if both MCLKs are
available?

> +  rockchip,tdm-fsync-half-frame:
> +    description: Whether to use half frame fsync.
> +    type: boolean
> +

Why is this not part of the normal bus format configuration?  I don't
know what this is but it sounds a lot like I2S mode...