From: Jianqun Xu <jay.xu@rock-chips.com>
To: heiko@sntech.de, linus.walleij@linaro.org,
andriy.shevchenko@linux.intel.com
Cc: brgl@bgdev.pl, linux-gpio@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Jianqun Xu <jay.xu@rock-chips.com>
Subject: [PATCH 2/6] ARM: dts: rockchip: add 'clock-names' for gpio dt nodes
Date: Fri, 9 Sep 2022 17:05:54 +0800 [thread overview]
Message-ID: <20220909090558.3609190-3-jay.xu@rock-chips.com> (raw)
In-Reply-To: <20220909090558.3609190-1-jay.xu@rock-chips.com>
Add 'clock-names' property for gpio dt nodes, which is used by the gpio
driver to identified as the index for the gpio controller.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
---
arch/arm/boot/dts/rk3036.dtsi | 3 +++
arch/arm/boot/dts/rk3066a.dtsi | 6 ++++++
arch/arm/boot/dts/rk3188.dtsi | 4 ++++
arch/arm/boot/dts/rk322x.dtsi | 4 ++++
4 files changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 912c21667dd4..0ae701f40b83 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -584,6 +584,7 @@ gpio0: gpio@2007c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2007c000 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
@@ -597,6 +598,7 @@ gpio1: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
@@ -610,6 +612,7 @@ gpio2: gpio@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index fe565440d6ad..343b44238269 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -283,6 +283,7 @@ gpio0: gpio@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
@@ -296,6 +297,7 @@ gpio1: gpio@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
@@ -309,6 +311,7 @@ gpio2: gpio@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
@@ -322,6 +325,7 @@ gpio3: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
@@ -335,6 +339,7 @@ gpio4: gpio@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO4>;
gpio-controller;
@@ -348,6 +353,7 @@ gpio6: gpio@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO6>;
gpio-controller;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index cdd4a0bd5133..bc6f53c87c08 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -228,6 +228,7 @@ gpio0: gpio@2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
@@ -241,6 +242,7 @@ gpio1: gpio@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
@@ -254,6 +256,7 @@ gpio2: gpio@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
@@ -267,6 +270,7 @@ gpio3: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index a814e813a5da..4ce2b3f00d48 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -956,6 +956,7 @@ gpio0: gpio@11110000 {
compatible = "rockchip,gpio-bank";
reg = <0x11110000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
@@ -969,6 +970,7 @@ gpio1: gpio@11120000 {
compatible = "rockchip,gpio-bank";
reg = <0x11120000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
@@ -982,6 +984,7 @@ gpio2: gpio@11130000 {
compatible = "rockchip,gpio-bank";
reg = <0x11130000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
@@ -995,6 +998,7 @@ gpio3: gpio@11140000 {
compatible = "rockchip,gpio-bank";
reg = <0x11140000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "bus";
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-09-09 9:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-09 9:05 [PATCH v5 0/6] gpio: rockchip: support acpi Jianqun Xu
2022-09-09 9:05 ` [PATCH 1/6] ARM: dts: rockchip: add gpio alias for gpio dt nodes Jianqun Xu
2022-09-09 10:14 ` jay.xu
2022-09-10 21:09 ` kernel test robot
2022-09-09 9:05 ` Jianqun Xu [this message]
2022-09-09 9:05 ` [PATCH 3/6] arm64: " Jianqun Xu
2022-09-09 9:05 ` [PATCH 4/6] arm64: dts: rockchip: add 'clock-names' " Jianqun Xu
2022-09-09 9:05 ` [PATCH 5/6] ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer Jianqun Xu
2022-09-09 9:05 ` [PATCH 6/6] gpio: rockchip: support acpi Jianqun Xu
2022-09-09 10:31 ` Andy Shevchenko
2022-09-13 1:07 ` jay.xu
2022-09-09 11:17 ` Johan Jonker
2022-09-13 1:12 ` jay.xu
2022-09-13 7:55 ` Johan Jonker
2022-09-13 1:14 ` jay.xu
2022-09-10 10:20 ` kernel test robot
2022-09-10 10:52 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220909090558.3609190-3-jay.xu@rock-chips.com \
--to=jay.xu@rock-chips.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@bgdev.pl \
--cc=heiko@sntech.de \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).