From: Chukun Pan <amadeus@jmu.edu.cn>
To: linux.amoon@gmail.com
Cc: heiko@sntech.de, krzysztof.kozlowski+dt@linaro.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
michael.riesch@wolfvision.net, robh+dt@kernel.org,
Chukun Pan <amadeus@jmu.edu.cn>
Subject: [PATCH 1/3] arm64: dts: rockchip: Add regulator suffix to rock-3a
Date: Tue, 27 Sep 2022 02:01:00 +0800 [thread overview]
Message-ID: <20220926180102.37614-2-amadeus@jmu.edu.cn> (raw)
In-Reply-To: <20220926180102.37614-1-amadeus@jmu.edu.cn>
Add -regulator suffix to regulator names on Radxa ROCK3 Model A
board. This makes the naming more consistent.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index fb87a168fe96..8adf672709e8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -60,7 +60,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v-dcin {
+ vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -79,7 +79,7 @@ vcc3v3_pcie: vcc3v3-pcie-regulator {
vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_sys: vcc3v3-sys {
+ vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
@@ -89,7 +89,7 @@ vcc3v3_sys: vcc3v3-sys {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
@@ -99,7 +99,7 @@ vcc5v0_sys: vcc5v0-sys {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_usb: vcc5v0-usb {
+ vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -109,7 +109,7 @@ vcc5v0_usb: vcc5v0-usb {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_usb_host: vcc5v0-usb-host {
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -144,7 +144,7 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
vin-supply = <&vcc5v0_usb>;
};
- vcc_cam: vcc-cam {
+ vcc_cam: vcc-cam-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -160,7 +160,7 @@ regulator-state-mem {
};
};
- vcc_mipi: vcc-mipi {
+ vcc_mipi: vcc-mipi-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-09-26 18:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 6:14 [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a Anand Moon
2022-09-26 18:00 ` Chukun Pan
2022-09-26 18:01 ` Chukun Pan [this message]
2022-09-27 5:42 ` [PATCH 1/3] arm64: dts: rockchip: Add regulator suffix to rock-3a Michael Riesch
2022-09-26 18:01 ` [PATCH 2/3] arm64: dts: rockchip: Rename pinctrl label of pcie2x1 on rock-3a Chukun Pan
2022-10-05 7:48 ` Heiko Stübner
2022-09-26 18:01 ` [PATCH 3/3] arm64: dts: rockchip: Add PCIe v3 nodes to rock-3a Chukun Pan
2022-09-27 13:46 ` [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a Anand Moon
2022-09-27 17:47 ` Robin Murphy
2022-09-28 10:05 ` Chukun Pan
2022-09-28 10:37 ` Robin Murphy
2022-09-27 18:15 ` Chukun Pan
2022-09-27 18:15 ` [PATCH 3/3] arm64: dts: rockchip: Add PCIe v3 nodes to rock-3a Chukun Pan
2022-09-28 11:04 ` [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a Anand Moon
2022-09-30 15:25 ` [PATCH 0/1] " Chukun Pan
2022-10-02 15:46 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220926180102.37614-2-amadeus@jmu.edu.cn \
--to=amadeus@jmu.edu.cn \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux.amoon@gmail.com \
--cc=michael.riesch@wolfvision.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).