linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Hugh Cole-Baker <sigmaris@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>
Cc: John Clark <inindev@gmail.com>,
	Thomas McKahan <tmckahan@singleboardsolutions.com>,
	Hugh Cole-Baker <sigmaris@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power
Date: Sun,  7 Jan 2024 22:37:14 +0000	[thread overview]
Message-ID: <20240107223714.8158-1-sigmaris@gmail.com> (raw)

The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE
modem. This slot has no PCIe functionality, only its USB 2.0 pins are
wired to the SoC, and its USIM pins are wired to a SIM card slot on the
board. Define the 3.3v supply for the slot so it can be used.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
---
I've based the names directly on the schematic [1] (page 29) which uses
VDD_4G_3.3V and 4G_LTE_PWREN for the supply and enable signal respectively.
This means the enable pinctrl label needs an initial underscore. I'm OK with
changing that if it's considered ugly or there's a better suggested name.

[1]: https://wiki.friendlyelec.com/wiki/images/9/97/NanoPC-T6_2301_SCH.PDF

 .../boot/dts/rockchip/rk3588-nanopc-t6.dts      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index d7722772ecd8..d91af387f7c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -159,6 +159,18 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vdd_4g_3v3: vdd-4g-3v3-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&_4g_lte_pwren>;
+		regulator-name = "vdd_4g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
 &combphy0_ps {
@@ -504,6 +516,10 @@ pcie_m2_1_pwren: pcie-m21-pwren {
 	};
 
 	usb {
+		_4g_lte_pwren: 4g-lte-pwren {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		typec5v_pwren: typec5v-pwren {
 			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -884,6 +900,7 @@ &uart2 {
 };
 
 &u2phy2_host {
+	phy-supply = <&vdd_4g_3v3>;
 	status = "okay";
 };
 
-- 
2.39.3 (Apple Git-145)


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

             reply	other threads:[~2024-01-07 22:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-07 22:37 Hugh Cole-Baker [this message]
2024-01-08  7:00 ` [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240107223714.8158-1-sigmaris@gmail.com \
    --to=sigmaris@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=inindev@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=tmckahan@singleboardsolutions.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).