linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Cheng-Yi Chiang <cychiang@chromium.org>, linux-kernel@vger.kernel.org
Cc: Taniya Das <tdas@codeaurora.org>,
	alsa-devel@alsa-project.org,
	Banajit Goswami <bgoswami@codeaurora.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rohit kumar <rohitkr@codeaurora.org>,
	Patrick Lai <plai@codeaurora.org>,
	Ajit Pandey <ajitp@codeaurora.org>,
	linux-rockchip@lists.infradead.org,
	Andy Gross <agross@kernel.org>,
	dgreid@chromium.org, Jaroslav Kysela <perex@perex.cz>,
	devicetree@vger.kernel.org, tzungbi@chromium.org,
	Stephan Gerhold <stephan@gerhold.net>,
	linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	linux-arm-kernel@lists.infradead.org, dianders@chromium.org,
	Takashi Iwai <tiwai@suse.com>, Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v9 3/3] ASoC: qcom: sc7180: Add machine driver for sound card registration
Date: Fri, 11 Sep 2020 12:04:56 +0100	[thread overview]
Message-ID: <4d25337d-3d23-9fca-9617-da54a4fdba97@linaro.org> (raw)
In-Reply-To: <20200911102259.3667381-4-cychiang@chromium.org>



On 11/09/2020 11:22, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <ajitp@codeaurora.org>
> 
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
> 
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> ---
>   sound/soc/qcom/Kconfig  |  12 ++
>   sound/soc/qcom/Makefile |   2 +
>   sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 281 insertions(+)
>   create mode 100644 sound/soc/qcom/sc7180.c
>
...
>   
>   obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
>   obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
>   obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
>   obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
>   obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
>   
>   #DSP lib
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..40bc4fc98842
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,267 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
Do you need this header?

> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_SAMPLE_RATE_48K		48000

Looks like ^ is Not used!

Overall the driver looks much cleaner now!

Also to make progress on this patch, may be you add define for HDMI with 
a comment!

Once unused remove, pl feel free to add !

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


--srini


> +#define DEFAULT_MCLK_RATE		19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +struct sc7180_snd_data {
> +	u32 pri_mi2s_clk_count;
> +	struct snd_soc_jack hs_jack;
> +	struct snd_soc_jack hdmi_jack;
> +};
> +
> +static void sc7180_jack_free(struct snd_jack *jack)
> +{
> +	struct snd_soc_component *component = jack->private_data;
> +
> +	snd_soc_component_set_jack(component, NULL, NULL);
> +}
> +
> +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "Headset Jack",
> +			SND_JACK_HEADSET |
> +			SND_JACK_HEADPHONE |
> +			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> +			SND_JACK_BTN_2 | SND_JACK_BTN_3,
> +			&pdata->hs_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add Headset Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hs_jack.jack;
> +
> +	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> +	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> +	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> +	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> +
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> +}
> +
> +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "HDMI Jack",
> +			SND_JACK_LINEOUT,
> +			&pdata->hdmi_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add HDMI Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hdmi_jack.jack;
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> +}
> +
> +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		return sc7180_headset_init(rtd);
> +	case MI2S_SECONDARY:
> +		return 0;
> +	case HDMI:
> +		return sc7180_hdmi_init(rtd);
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	int ret;
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (++data->pri_mi2s_clk_count == 1) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       DEFAULT_MCLK_RATE,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +
> +		snd_soc_dai_set_fmt(codec_dai,
> +				    SND_SOC_DAIFMT_CBS_CFS |
> +				    SND_SOC_DAIFMT_NB_NF |
> +				    SND_SOC_DAIFMT_I2S);
> +
> +		/* Configure PLL1 for codec */
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> +					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> +		if (ret) {
> +			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> +			return ret;
> +		}
> +
> +		/* Configure sysclk for codec */
> +		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> +					     RT5682_PLL1_FREQ,
> +					     SND_SOC_CLOCK_IN);
> +		if (ret)
> +			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> +				ret);
> +
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case HDMI:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (--data->pri_mi2s_clk_count == 0) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       0,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case HDMI:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		break;
> +	}
> +}
> +
> +static const struct snd_soc_ops sc7180_ops = {
> +	.startup = sc7180_snd_startup,
> +	.shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> +	SND_SOC_DAPM_HP("Headphone Jack", NULL),
> +	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static struct snd_soc_card sc7180_card = {
> +	.owner = THIS_MODULE,
> +	.dapm_widgets = sc7180_snd_widgets,
> +	.num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> +};
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai_link *link;
> +	int i;
> +
> +	for_each_card_prelinks(card, i, link) {
> +		link->ops = &sc7180_ops;
> +		link->init = sc7180_init;
> +	}
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> +	struct snd_soc_card *card = &sc7180_card;
> +	struct sc7180_snd_data *data;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	/* Allocate the private data */
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	card->dev = dev;
> +	snd_soc_card_set_drvdata(card, data);
> +
> +	ret = qcom_snd_parse_of(card);
> +	if (ret) {
> +		dev_err(dev, "Error parsing OF data\n");
> +		return ret;
> +	}
> +
> +	sc7180_add_ops(card);
> +
> +	return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[]  = {
> +	{ .compatible = "qcom,sc7180-sndcard" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> +
> +static struct platform_driver sc7180_snd_driver = {
> +	.probe = sc7180_snd_platform_probe,
> +	.driver = {
> +		.name = "msm-snd-sc7180",
> +		.of_match_table = sc7180_snd_device_id,
> +	},
> +};
> +module_platform_driver(sc7180_snd_driver);
> +
> +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> +MODULE_LICENSE("GPL v2");
> 

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2020-09-11 11:05 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 10:22 [PATCH v9 0/3] Add documentation and machine driver for SC7180 sound card Cheng-Yi Chiang
2020-09-11 10:22 ` [PATCH v9 1/3] ASoC: hdmi-codec: Use set_jack ops to set jack Cheng-Yi Chiang
2020-09-11 10:22 ` [PATCH v9 2/3] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
2020-09-11 10:22 ` [PATCH v9 3/3] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
2020-09-11 11:04   ` Srinivas Kandagatla [this message]
2020-09-11 17:14     ` Cheng-yi Chiang
2020-09-11 15:00   ` Stephan Gerhold
2020-09-11 17:20     ` Cheng-yi Chiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4d25337d-3d23-9fca-9617-da54a4fdba97@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=agross@kernel.org \
    --cc=ajitp@codeaurora.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=cychiang@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dgreid@chromium.org \
    --cc=dianders@chromium.org \
    --cc=heiko@sntech.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=stephan@gerhold.net \
    --cc=tdas@codeaurora.org \
    --cc=tiwai@suse.com \
    --cc=tzungbi@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).