From: Shawn Lin <shawn.lin@rock-chips.com>
To: "Milan P. Stanić" <mps@arvanta.net>
Cc: shawn.lin@rock-chips.com, linux-mmc@vger.kernel.org,
Ulf Hansson <ulf.hansson@linaro.org>,
"open list:ARM/Rockchip SoC..."
<linux-rockchip@lists.infradead.org>
Subject: Re: PROBLEM: mmc_select_hs400es failed, error -110【请注意,邮件由linux-mmc-owner@vger.kernel.org代发】
Date: Thu, 19 Mar 2020 11:11:32 +0800 [thread overview]
Message-ID: <5922bbd7-e91b-d144-6d44-2632cbd11c78@rock-chips.com> (raw)
In-Reply-To: <20200318214917.GA9112@arya.arvanta.net>
Hi Milan
[+linux-rockchip to see if someone has a Samsung chromebook one plus
and could confirm if it works]
On 2020/3/19 5:49, Milan P. Stanić wrote:
> Hello,
>
> Sorry to annoy again, but could you tell me if I sent this bug report
> to right mail address or I should send it somewhere else.
>
> Also, did I sent bug report correctly or I did some mistakes which
> caused it to be ignored.
>
> -- TIA On Sun, 2020-03-01 at 23:02, Milan P. Stanić wrote:
>> Hello,
>>
>> I'm not native English speaker and I'm self taught in English so sorry
>> if do not write or express correctly. And sorry if I posted bug report
>> to wrong address.
>>
>> I'm running linux 5.6.0-rc3 without any patches on Samsung chromebook
>> one plus, Arm64 rockchip rk3399 based model name:
>> Machine model: Google Kevin
>>
>> I build kernels from upstream git.kernel.org for this machine for some
>> time (iirc, from 5.2.1 and up) but I'm getting error messages in kernel
>> after machine resumes from suspend-to-ram.
It sounds to me suspend-to-ram never works for this machine, at least
since 5.2.1. Am I right?
>>
>> excerpt from dmesg output:
>> -----------------------------------------------------------------------
>> Restarting tasks ... done.
>> PM: suspend exit
>> mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
>> mmc1: mmc_select_hs400es failed, error -110
>> mmc1: error -110 doing runtime resume
>> mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
>> mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
>> mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002
>> mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
>> mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023
>> mmc1: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000035
>> mmc1: sdhci: Power: 0x0000000b | Blk gap: 0x00000080
>> mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000bc07
>> mmc1: sdhci: Timeout: 0x0000000d | Int stat: 0x00000000
>> mmc1: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b
>> mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
>> mmc1: sdhci: Caps: 0x44edc880 | Caps_1: 0x801020f7
>> mmc1: sdhci: Cmd: 0x00000c1a | Max curr: 0x00000000
>> mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x373300bd
>> mmc1: sdhci: Resp[2]: 0x35303030 | Resp[3]: 0x00000000
>> mmc1: sdhci: Host ctl2: 0x00000000
>> mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xed41e200
>> -----------------------------------------------------------------------
>>
>> I invoke suspend-to-ram by `echo mem > /sys/power/state` from ACPI power
>> and LID button handlers.
>>
>> This only happens when I boot and use internal emmc card and never when
>> boot and use external mmc card.
>>
>> If suspend-to-ram is not invoked (machine is always in normal state)
>> this problem never happen (or I missed it somehow).
>>
>> I'm attaching kernel .config (file config-5.6.0-rc3-1-gru.conf) which
>> use to build kernel, output of the `awk -f scripts/ver_linux` as file
>> ver_linux.txt and output of dmesg as file mmc-err.txt (from which I
>> deleted wifi connection logs).
>>
>> Sorry if I did something bad or wrong with this bug report, I don't have
>> much experience with bug reporting, especially for kernel.
>>
>> I'm ready to send you more data, and investigate this more, apply
>> patches and rebuild kernel or whatever you ask me (of course if my
>> understanding and knowledge is enough for this job).
>>
>> Thank in advance
>>
>> --
>> Kind regards
>>
> [...]
>
>
next parent reply other threads:[~2020-03-19 3:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200301220242.GA8276@arya.arvanta.net>
[not found] ` <20200318214917.GA9112@arya.arvanta.net>
2020-03-19 3:11 ` Shawn Lin [this message]
2020-03-19 12:00 ` PROBLEM: mmc_select_hs400es failed, error -110【请注意,邮件由linux-mmc-owner@vger.kernel.org代发】 Milan P. Stanić
2020-03-19 12:28 ` Robin Murphy
2020-03-21 20:46 ` Milan P. Stanić
2020-03-27 17:14 ` Milan P. Stanić
2020-03-30 18:19 ` Ulf Hansson
2020-03-31 21:40 ` Milan P. Stanić
2020-04-17 19:31 ` Milan P. Stanić
2020-04-20 7:17 ` Ulf Hansson
2020-04-20 15:15 ` Milan P. Stanić
2021-08-13 19:25 ` Milan P. Stanić
[not found] ` <CAMdYzYrBx6nkz_y17wY1feRz7YMa41Q+Y7h+GnxZyA--JKOu+A@mail.gmail.com>
2021-08-13 21:45 ` Milan P. Stanić
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5922bbd7-e91b-d144-6d44-2632cbd11c78@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mps@arvanta.net \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).