Re: [PATCH v11 3/3] ASoC: qcom: sc7180: Add machine driver for sound card registration

[Cheng-yi Chiang <cychiang@chromium.org>]

On Tue, Oct 13, 2020 at 11:50 AM Cheng-yi Chiang <cychiang@chromium.org> wrote:
>
> On Mon, Sep 14, 2020 at 4:06 PM Cheng-Yi Chiang <cychiang@chromium.org> wrote:
> >
> > From: Ajit Pandey <ajitp@codeaurora.org>
> >
> > Add new driver to register sound card on sc7180 trogdor board and
> > do the required configuration for lpass cpu dai and external codecs
> > connected over MI2S interfaces.
> >
> > Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> > ---
> >  sound/soc/qcom/Kconfig  |  12 ++
> >  sound/soc/qcom/Makefile |   2 +
> >  sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 280 insertions(+)
> >  create mode 100644 sound/soc/qcom/sc7180.c
> >
> > diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> > index a607ace8b089..0459185ee243 100644
> > --- a/sound/soc/qcom/Kconfig
> > +++ b/sound/soc/qcom/Kconfig
> > @@ -116,4 +116,16 @@ config SND_SOC_SDM845
> >           SDM845 SoC-based systems.
> >           Say Y if you want to use audio device on this SoCs.
> >
> > +config SND_SOC_SC7180
> > +       tristate "SoC Machine driver for SC7180 boards"
> > +       depends on I2C
> > +       select SND_SOC_QCOM_COMMON
> > +       select SND_SOC_LPASS_SC7180
> > +       select SND_SOC_MAX98357A
> > +       select SND_SOC_RT5682_I2C
> > +       help
> > +         To add support for audio on Qualcomm Technologies Inc.
> > +         SC7180 SoC-based systems.
> > +         Say Y if you want to use audio device on this SoCs.
> > +
> >  endif #SND_SOC_QCOM
> > diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> > index 7972c9479ab0..0cdcbf367ef1 100644
> > --- a/sound/soc/qcom/Makefile
> > +++ b/sound/soc/qcom/Makefile
> > @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o
> >  snd-soc-apq8016-sbc-objs := apq8016_sbc.o
> >  snd-soc-apq8096-objs := apq8096.o
> >  snd-soc-sdm845-objs := sdm845.o
> > +snd-soc-sc7180-objs := sc7180.o
> >  snd-soc-qcom-common-objs := common.o
> >
> >  obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> >  obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> >  obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> >  obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> >  obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> >
> >  #DSP lib
> > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> > new file mode 100644
> > index 000000000000..0e90448523b0
> > --- /dev/null
> > +++ b/sound/soc/qcom/sc7180.c
> > @@ -0,0 +1,266 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> > +//
> > +// sc7180.c -- ALSA SoC Machine driver for SC7180
> > +
> > +#include <dt-bindings/sound/sc7180-lpass.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <sound/core.h>
> > +#include <sound/jack.h>
> > +#include <sound/pcm.h>
> > +#include <sound/soc.h>
> > +#include <uapi/linux/input-event-codes.h>
> > +
> > +#include "../codecs/rt5682.h"
> > +#include "common.h"
> > +#include "lpass.h"
> > +
> > +#define DEFAULT_MCLK_RATE              19200000
> > +#define RT5682_PLL1_FREQ (48000 * 512)
> > +
> > +// This will be defined in include/dt-bindings/sound/sc7180-lpass.h
> > +#define LPASS_DP_RX 2
> > +
> > +struct sc7180_snd_data {
> > +       struct snd_soc_card card;
> > +       u32 pri_mi2s_clk_count;
> > +       struct snd_soc_jack hs_jack;
> > +       struct snd_soc_jack hdmi_jack;
> > +};
> > +
> > +static void sc7180_jack_free(struct snd_jack *jack)
> > +{
> > +       struct snd_soc_component *component = jack->private_data;
> > +
> > +       snd_soc_component_set_jack(component, NULL, NULL);
> > +}
> > +
> > +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > +       struct snd_soc_card *card = rtd->card;
> > +       struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > +       struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > +       struct snd_soc_component *component = codec_dai->component;
> > +       struct snd_jack *jack;
> > +       int rval;
> > +
> > +       rval = snd_soc_card_jack_new(
> > +                       card, "Headset Jack",
> > +                       SND_JACK_HEADSET |
> > +                       SND_JACK_HEADPHONE |
> > +                       SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> > +                       SND_JACK_BTN_2 | SND_JACK_BTN_3,
> > +                       &pdata->hs_jack, NULL, 0);
> > +
> > +       if (rval < 0) {
> > +               dev_err(card->dev, "Unable to add Headset Jack\n");
> > +               return rval;
> > +       }
> > +
> > +       jack = pdata->hs_jack.jack;
> > +
> > +       snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> > +       snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> > +       snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> > +       snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> > +
> > +       jack->private_data = component;
> > +       jack->private_free = sc7180_jack_free;
> > +
> > +       return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> > +}
> > +
> > +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > +       struct snd_soc_card *card = rtd->card;
> > +       struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > +       struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > +       struct snd_soc_component *component = codec_dai->component;
> > +       struct snd_jack *jack;
> > +       int rval;
> > +
> > +       rval = snd_soc_card_jack_new(
> > +                       card, "HDMI Jack",
> > +                       SND_JACK_LINEOUT,
> > +                       &pdata->hdmi_jack, NULL, 0);
> > +
> > +       if (rval < 0) {
> > +               dev_err(card->dev, "Unable to add HDMI Jack\n");
> > +               return rval;
> > +       }
> > +
> > +       jack = pdata->hdmi_jack.jack;
> > +       jack->private_data = component;
> > +       jack->private_free = sc7180_jack_free;
> > +
> > +       return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> > +}
> > +
> > +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > +       struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > +       switch (cpu_dai->id) {
> > +       case MI2S_PRIMARY:
> > +               return sc7180_headset_init(rtd);
> > +       case MI2S_SECONDARY:
> > +               return 0;
> > +       case LPASS_DP_RX:
> > +               return sc7180_hdmi_init(rtd);
> > +       default:
> > +               dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > +                       cpu_dai->id);
> > +               return -EINVAL;
> > +       }
> > +       return 0;
> > +}
> > +
> > +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> > +{
> > +       struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > +       struct snd_soc_card *card = rtd->card;
> > +       struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > +       struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +       struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > +       int ret;
> > +
> > +       switch (cpu_dai->id) {
> > +       case MI2S_PRIMARY:
> > +               if (++data->pri_mi2s_clk_count == 1) {
> > +                       snd_soc_dai_set_sysclk(cpu_dai,
> > +                                              LPASS_MCLK0,
> > +                                              DEFAULT_MCLK_RATE,
> > +                                              SNDRV_PCM_STREAM_PLAYBACK);
> > +               }
> > +
> > +               snd_soc_dai_set_fmt(codec_dai,
> > +                                   SND_SOC_DAIFMT_CBS_CFS |
> > +                                   SND_SOC_DAIFMT_NB_NF |
> > +                                   SND_SOC_DAIFMT_I2S);
> > +
> > +               /* Configure PLL1 for codec */
> > +               ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> > +                                         DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> > +               if (ret) {
> > +                       dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> > +                       return ret;
> > +               }
> > +
> > +               /* Configure sysclk for codec */
> > +               ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> > +                                            RT5682_PLL1_FREQ,
> > +                                            SND_SOC_CLOCK_IN);
> > +               if (ret)
> > +                       dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> > +                               ret);
> > +
> > +               break;
> > +       case MI2S_SECONDARY:
> > +               break;
> > +       case LPASS_DP_RX:
> > +               break;
> > +       default:
> > +               dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > +                       cpu_dai->id);
> > +               return -EINVAL;
> > +       }
> > +       return 0;
> > +}
> > +
> > +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> > +{
> > +       struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > +       struct snd_soc_card *card = rtd->card;
> > +       struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > +       struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > +       switch (cpu_dai->id) {
> > +       case MI2S_PRIMARY:
> > +               if (--data->pri_mi2s_clk_count == 0) {
> > +                       snd_soc_dai_set_sysclk(cpu_dai,
> > +                                              LPASS_MCLK0,
> > +                                              0,
> > +                                              SNDRV_PCM_STREAM_PLAYBACK);
> > +               }
> > +               break;
> > +       case MI2S_SECONDARY:
> > +               break;
> > +       case LPASS_DP_RX:
> > +               break;
> > +       default:
> > +               dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > +                       cpu_dai->id);
> > +               break;
> > +       }
> > +}
> > +
> > +static const struct snd_soc_ops sc7180_ops = {
> > +       .startup = sc7180_snd_startup,
> > +       .shutdown = sc7180_snd_shutdown,
> > +};
> > +
> > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> > +       SND_SOC_DAPM_HP("Headphone Jack", NULL),
> > +       SND_SOC_DAPM_MIC("Headset Mic", NULL),
> > +};
> > +
> > +static void sc7180_add_ops(struct snd_soc_card *card)
> > +{
> > +       struct snd_soc_dai_link *link;
> > +       int i;
> > +
> > +       for_each_card_prelinks(card, i, link) {
> > +               link->ops = &sc7180_ops;
> > +               link->init = sc7180_init;
> > +       }
> > +}
> > +
> > +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> > +{
> > +       struct snd_soc_card *card;
> > +       struct sc7180_snd_data *data;
> > +       struct device *dev = &pdev->dev;
> > +       int ret;
> > +
> > +       /* Allocate the private data */
> > +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > +       if (!data)
> > +               return -ENOMEM;
> > +
> > +       card = &data->card;
> > +       snd_soc_card_set_drvdata(card, data);
> > +
> > +       card->owner = THIS_MODULE,
> > +       card->dev = dev;
> > +       card->dapm_widgets = sc7180_snd_widgets;
> > +       card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
> > +
> > +       ret = qcom_snd_parse_of(card);
> > +       if (ret)
> > +               return ret;
> > +
> > +       sc7180_add_ops(card);
> > +
> > +       return devm_snd_soc_register_card(dev, card);
> > +}
> > +
> > +static const struct of_device_id sc7180_snd_device_id[]  = {
> > +       { .compatible = "qcom,sc7180-sndcard-rt5682-m98357-1mic" },
> > +       {},
> > +};
> > +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> > +
> > +static struct platform_driver sc7180_snd_driver = {
> > +       .probe = sc7180_snd_platform_probe,
> > +       .driver = {
> > +               .name = "msm-snd-sc7180",
> > +               .of_match_table = sc7180_snd_device_id,
> > +       },
> > +};
> > +module_platform_driver(sc7180_snd_driver);
> > +
> > +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.28.0.618.gf4bc123cb7-goog
> >
>
> Hi Srini and Stephan,
> May I get your Reviewed-By for this patch ?
> There are some patches on the machine driver for different
> configurations pending on this one so I would hope to get this one
> merged first.
>
> Thanks a lot for reviewing it!

Thanks Srini for the suggestion in the review of compatible strings.
In the next version (v12), I will modify accordingly to use model
property rather than compatible string to specify board configuration.
Thanks!

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip