linux-rt-users.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Scott Wood <swood@redhat.com>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-rt-users@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Paul E . McKenney" <paulmck@linux.ibm.com>,
	Joel Fernandes <joel@joelfernandes.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Steven Rostedt <rostedt@goodmis.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Juri Lelli <juri.lelli@redhat.com>,
	Clark Williams <williams@redhat.com>,
	Scott Wood <swood@redhat.com>
Subject: [PATCH RT v3 5/5] rcutorture: Avoid problematic critical section nesting on RT
Date: Wed, 11 Sep 2019 17:57:29 +0100	[thread overview]
Message-ID: <20190911165729.11178-6-swood@redhat.com> (raw)
In-Reply-To: <20190911165729.11178-1-swood@redhat.com>

rcutorture was generating some nesting scenarios that are not
reasonable.  Constrain the state selection to avoid them.

Example #1:

1. preempt_disable()
2. local_bh_disable()
3. preempt_enable()
4. local_bh_enable()

On PREEMPT_RT, BH disabling takes a local lock only when called in
non-atomic context.  Thus, atomic context must be retained until after BH
is re-enabled.  Likewise, if BH is initially disabled in non-atomic
context, it cannot be re-enabled in atomic context.

Example #2:

1. rcu_read_lock()
2. local_irq_disable()
3. rcu_read_unlock()
4. local_irq_enable()

If the thread is preempted between steps 1 and 2,
rcu_read_unlock_special.b.blocked will be set, but it won't be
acted on in step 3 because IRQs are disabled.  Thus, reporting of the
quiescent state will be delayed beyond the local_irq_enable().

For now, these scenarios will continue to be tested on non-PREEMPT_RT
kernels, until debug checks are added to ensure that they are not
happening elsewhere.

Signed-off-by: Scott Wood <swood@redhat.com>
---
v3: Limit to RT kernels, and remove one constraint that, while it
is bad on both RT and non-RT (missing a schedule), does not oops or
otherwise prevent using rcutorture.  It wolud be added once debug checks
are implemented.

 kernel/rcu/rcutorture.c | 96 +++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 82 insertions(+), 14 deletions(-)

diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index efaa5b3f4d3f..ecb82cc432af 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -60,10 +60,13 @@
 #define RCUTORTURE_RDR_RBH	 0x08	/*  ... rcu_read_lock_bh(). */
 #define RCUTORTURE_RDR_SCHED	 0x10	/*  ... rcu_read_lock_sched(). */
 #define RCUTORTURE_RDR_RCU	 0x20	/*  ... entering another RCU reader. */
-#define RCUTORTURE_RDR_NBITS	 6	/* Number of bits defined above. */
+#define RCUTORTURE_RDR_ATOM_BH	 0x40	/*  ... disabling bh while atomic */
+#define RCUTORTURE_RDR_ATOM_RBH	 0x80	/*  ... RBH while atomic */
+#define RCUTORTURE_RDR_NBITS	 8	/* Number of bits defined above. */
 #define RCUTORTURE_MAX_EXTEND	 \
 	(RCUTORTURE_RDR_BH | RCUTORTURE_RDR_IRQ | RCUTORTURE_RDR_PREEMPT | \
-	 RCUTORTURE_RDR_RBH | RCUTORTURE_RDR_SCHED)
+	 RCUTORTURE_RDR_RBH | RCUTORTURE_RDR_SCHED | \
+	 RCUTORTURE_RDR_ATOM_BH | RCUTORTURE_RDR_ATOM_RBH)
 #define RCUTORTURE_RDR_MAX_LOOPS 0x7	/* Maximum reader extensions. */
 					/* Must be power of two minus one. */
 #define RCUTORTURE_RDR_MAX_SEGS (RCUTORTURE_RDR_MAX_LOOPS + 3)
@@ -1092,31 +1095,52 @@ static void rcutorture_one_extend(int *readstate, int newstate,
 	WARN_ON_ONCE((idxold >> RCUTORTURE_RDR_SHIFT) > 1);
 	rtrsp->rt_readstate = newstate;
 
-	/* First, put new protection in place to avoid critical-section gap. */
+	/*
+	 * First, put new protection in place to avoid critical-section gap.
+	 * Disable preemption around the ATOM disables to ensure that
+	 * in_atomic() is true.
+	 */
 	if (statesnew & RCUTORTURE_RDR_BH)
 		local_bh_disable();
+	if (statesnew & RCUTORTURE_RDR_RBH)
+		rcu_read_lock_bh();
 	if (statesnew & RCUTORTURE_RDR_IRQ)
 		local_irq_disable();
 	if (statesnew & RCUTORTURE_RDR_PREEMPT)
 		preempt_disable();
-	if (statesnew & RCUTORTURE_RDR_RBH)
-		rcu_read_lock_bh();
 	if (statesnew & RCUTORTURE_RDR_SCHED)
 		rcu_read_lock_sched();
+	preempt_disable();
+	if (statesnew & RCUTORTURE_RDR_ATOM_BH)
+		local_bh_disable();
+	if (statesnew & RCUTORTURE_RDR_ATOM_RBH)
+		rcu_read_lock_bh();
+	preempt_enable();
 	if (statesnew & RCUTORTURE_RDR_RCU)
 		idxnew = cur_ops->readlock() << RCUTORTURE_RDR_SHIFT;
 
-	/* Next, remove old protection, irq first due to bh conflict. */
+	/*
+	 * Next, remove old protection, in decreasing order of strength
+	 * to avoid unlock paths that aren't safe in the stronger
+	 * context.  Disable preemption around the ATOM enables in
+	 * case the context was only atomic due to IRQ disabling.
+	 */
+	preempt_disable();
 	if (statesold & RCUTORTURE_RDR_IRQ)
 		local_irq_enable();
-	if (statesold & RCUTORTURE_RDR_BH)
+	if (statesold & RCUTORTURE_RDR_ATOM_BH)
 		local_bh_enable();
+	if (statesold & RCUTORTURE_RDR_ATOM_RBH)
+		rcu_read_unlock_bh();
+	preempt_enable();
 	if (statesold & RCUTORTURE_RDR_PREEMPT)
 		preempt_enable();
-	if (statesold & RCUTORTURE_RDR_RBH)
-		rcu_read_unlock_bh();
 	if (statesold & RCUTORTURE_RDR_SCHED)
 		rcu_read_unlock_sched();
+	if (statesold & RCUTORTURE_RDR_BH)
+		local_bh_enable();
+	if (statesold & RCUTORTURE_RDR_RBH)
+		rcu_read_unlock_bh();
 	if (statesold & RCUTORTURE_RDR_RCU)
 		cur_ops->readunlock(idxold >> RCUTORTURE_RDR_SHIFT);
 
@@ -1152,6 +1176,12 @@ static int rcutorture_extend_mask_max(void)
 	int mask = rcutorture_extend_mask_max();
 	unsigned long randmask1 = torture_random(trsp) >> 8;
 	unsigned long randmask2 = randmask1 >> 3;
+	unsigned long preempts = RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED;
+	unsigned long preempts_irq = preempts | RCUTORTURE_RDR_IRQ;
+	unsigned long nonatomic_bhs = RCUTORTURE_RDR_BH | RCUTORTURE_RDR_RBH;
+	unsigned long atomic_bhs = RCUTORTURE_RDR_ATOM_BH |
+				   RCUTORTURE_RDR_ATOM_RBH;
+	unsigned long tmp;
 
 	WARN_ON_ONCE(mask >> RCUTORTURE_RDR_SHIFT);
 	/* Mostly only one bit (need preemption!), sometimes lots of bits. */
@@ -1159,11 +1189,49 @@ static int rcutorture_extend_mask_max(void)
 		mask = mask & randmask2;
 	else
 		mask = mask & (1 << (randmask2 % RCUTORTURE_RDR_NBITS));
-	/* Can't enable bh w/irq disabled. */
-	if ((mask & RCUTORTURE_RDR_IRQ) &&
-	    ((!(mask & RCUTORTURE_RDR_BH) && (oldmask & RCUTORTURE_RDR_BH)) ||
-	     (!(mask & RCUTORTURE_RDR_RBH) && (oldmask & RCUTORTURE_RDR_RBH))))
-		mask |= RCUTORTURE_RDR_BH | RCUTORTURE_RDR_RBH;
+
+	/*
+	 * Can't enable bh w/irq disabled.
+	 */
+	tmp = atomic_bhs | nonatomic_bhs;
+	if (mask & RCUTORTURE_RDR_IRQ)
+		mask |= oldmask & tmp;
+
+	/*
+	 * Ideally these sequences would be detected in debug builds
+	 * (regardless of RT), but until then don't stop testing
+	 * them on non-RT.
+	 */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT_FULL)) {
+		/*
+		 * Can't release the outermost rcu lock in an irq disabled
+		 * section without preemption also being disabled, if irqs
+		 * had ever been enabled during this RCU critical section
+		 * (could leak a special flag and delay reporting the qs).
+		 */
+		if ((oldmask & RCUTORTURE_RDR_RCU) &&
+		    (mask & RCUTORTURE_RDR_IRQ) &&
+		    !(mask & preempts))
+			mask |= RCUTORTURE_RDR_RCU;
+
+		/* Can't modify atomic bh in non-atomic context */
+		if ((oldmask & atomic_bhs) && (mask & atomic_bhs) &&
+		    !(mask & preempts_irq)) {
+			mask |= oldmask & preempts_irq;
+			if (mask & RCUTORTURE_RDR_IRQ)
+				mask |= oldmask & tmp;
+		}
+		if ((mask & atomic_bhs) && !(mask & preempts_irq))
+			mask |= RCUTORTURE_RDR_PREEMPT;
+
+		/* Can't modify non-atomic bh in atomic context */
+		tmp = nonatomic_bhs;
+		if (oldmask & preempts_irq)
+			mask &= ~tmp;
+		if ((oldmask | mask) & preempts_irq)
+			mask |= oldmask & tmp;
+	}
+
 	return mask ?: RCUTORTURE_RDR_RCU;
 }
 
-- 
1.8.3.1


  parent reply	other threads:[~2019-09-11 16:58 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-11 16:57 [PATCH RT v3 0/5] RCU fixes Scott Wood
2019-09-11 16:57 ` [PATCH RT v3 1/5] rcu: Acquire RCU lock when disabling BHs Scott Wood
2019-09-12 22:09   ` Joel Fernandes
2019-09-17  7:44   ` Sebastian Andrzej Siewior
2019-09-17 14:06     ` Scott Wood
2019-09-17 14:42       ` Sebastian Andrzej Siewior
2019-09-17 16:12         ` Scott Wood
2019-09-23 16:41           ` Sebastian Andrzej Siewior
2019-09-11 16:57 ` [PATCH RT v3 2/5] sched: Rename sleeping_lock to rt_invol_sleep Scott Wood
2019-09-17  7:52   ` Sebastian Andrzej Siewior
2019-09-11 16:57 ` [PATCH RT v3 3/5] sched: migrate_dis/enable: Use rt_invol_sleep Scott Wood
2019-09-17  7:59   ` Sebastian Andrzej Siewior
2019-09-17 14:06     ` Scott Wood
2019-09-23 16:59       ` Scott Wood
2019-09-23 17:52         ` Sebastian Andrzej Siewior
2019-09-24 11:21           ` Sebastian Andrzej Siewior
2019-09-24 13:53             ` Scott Wood
2019-09-24 15:25               ` Sebastian Andrzej Siewior
2019-09-24 15:47                 ` Scott Wood
2019-09-24 16:05                   ` Sebastian Andrzej Siewior
2019-09-24 16:35                     ` Scott Wood
2019-10-04 16:45                       ` Sebastian Andrzej Siewior
2019-09-11 16:57 ` [PATCH RT v3 4/5] rcu: Disable use_softirq on PREEMPT_RT Scott Wood
2019-09-12 21:38   ` Joel Fernandes
2019-09-12 22:19     ` Joel Fernandes
2019-09-17  9:31     ` Sebastian Andrzej Siewior
2019-09-17 14:08   ` Scott Wood
2019-09-11 16:57 ` Scott Wood [this message]
2019-09-12 22:17   ` [PATCH RT v3 5/5] rcutorture: Avoid problematic critical section nesting on RT Joel Fernandes
2019-09-16 16:55     ` Scott Wood
2019-09-17 10:07       ` Sebastian Andrzej Siewior
2019-09-17 14:36         ` Scott Wood
2019-09-17 14:50           ` Sebastian Andrzej Siewior
2019-09-17 16:32             ` Scott Wood
2019-09-23 16:25               ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190911165729.11178-6-swood@redhat.com \
    --to=swood@redhat.com \
    --cc=bigeasy@linutronix.de \
    --cc=joel@joelfernandes.org \
    --cc=juri.lelli@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=paulmck@linux.ibm.com \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=williams@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).