From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Eddie Huang <eddie.huang@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thomas Gleixner <tglx@linutronix.de>,
Richard Fontana <rfontana@redhat.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-rtc@vger.kernel.org>,
<srv_heupstream@mediatek.com>
Subject: [PATCH v5 05/10] regulator: Add document for MT6358 regulator
Date: Fri, 23 Aug 2019 11:45:26 +0800 [thread overview]
Message-ID: <1566531931-9772-6-git-send-email-hsin-hsiung.wang@mediatek.com> (raw)
In-Reply-To: <1566531931-9772-1-git-send-email-hsin-hsiung.wang@mediatek.com>
add dt-binding document for MediaTek MT6358 PMIC
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
.../bindings/regulator/mt6358-regulator.txt | 358 +++++++++++++++++++++
1 file changed, 358 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
new file mode 100644
index 0000000..9a90a92
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -0,0 +1,358 @@
+MediaTek MT6358 Regulator
+
+All voltage regulators provided by the MT6358 PMIC are described as the
+subnodes of the MT6358 regulators node. Each regulator is named according
+to its regulator type, buck_<name> and ldo_<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+ buck_vs2, buck_vmodem, buck_vs1
+LDO:
+ ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
+ ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
+ ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+ ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+ ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+ ldo_vsim2
+
+Example:
+
+ pmic {
+ compatible = "mediatek,mt6358";
+
+ mt6358regulator: mt6358regulator {
+ compatible = "mediatek,mt6358-regulator";
+
+ mt6358_vdram1_reg: buck_vdram1 {
+ regulator-compatible = "buck_vdram1";
+ regulator-name = "vdram1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2087500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6358_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ };
+
+ mt6358_vpa_reg: buck_vpa {
+ regulator-name = "vpa";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-ramp-delay = <50000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ mt6358_vproc11_reg: buck_vproc11 {
+ regulator-name = "vproc11";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ };
+
+ mt6358_vproc12_reg: buck_vproc12 {
+ regulator-name = "vproc12";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ };
+
+ mt6358_vgpu_reg: buck_vgpu {
+ regulator-name = "vgpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ };
+
+ mt6358_vs2_reg: buck_vs2 {
+ regulator-name = "vs2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2087500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6358_vmodem_reg: buck_vmodem {
+ regulator-name = "vmodem";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <900>;
+ regulator-always-on;
+ };
+
+ mt6358_vs1_reg: buck_vs1 {
+ regulator-name = "vs1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2587500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6358_vdram2_reg: ldo_vdram2 {
+ regulator-name = "vdram2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <3300>;
+ };
+
+ mt6358_vsim1_reg: ldo_vsim1 {
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+
+ mt6358_vibr_reg: ldo_vibr {
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vrf12_reg: ldo_vrf12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vrf12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ mt6358_vio18_reg: ldo_vio18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <2700>;
+ regulator-always-on;
+ };
+
+ mt6358_vusb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ mt6358_vcamio_reg: ldo_vcamio {
+ compatible = "regulator-fixed";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcamd_reg: ldo_vcamd {
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcn18_reg: ldo_vcn18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vfe28_reg: ldo_vfe28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vfe28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+ regulator-name = "vsram_proc11";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vcn28_reg: ldo_vcn28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_others_reg: ldo_vsram_others {
+ regulator-name = "vsram_others";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+ regulator-name = "vsram_gpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6358_vxo22_reg: ldo_vxo22 {
+ compatible = "regulator-fixed";
+ regulator-name = "vxo22";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ regulator-always-on;
+ };
+
+ mt6358_vefuse_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vaux18_reg: ldo_vaux18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vaux18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vbif28_reg: ldo_vbif28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbif28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+ regulator-name = "vsram_proc12";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vcama1_reg: ldo_vcama1 {
+ regulator-name = "vcama1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vemc_reg: ldo_vemc {
+ regulator-name = "vemc";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ regulator-always-on;
+ };
+
+ mt6358_vio28_reg: ldo_vio28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_va12_reg: ldo_va12 {
+ compatible = "regulator-fixed";
+ regulator-name = "va12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ mt6358_vrf18_reg: ldo_vrf18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ mt6358_vcn33_bt_reg: ldo_vcn33_bt {
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcama2_reg: ldo_vcama2 {
+ regulator-name = "vcama2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vldo28_reg: ldo_vldo28 {
+ regulator-name = "vldo28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vaud28_reg: ldo_vaud28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vaud28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsim2_reg: ldo_vsim2 {
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+ };
+ };
--
1.9.1
next prev parent reply other threads:[~2019-08-23 3:46 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 3:45 [PATCH v5 00/10] Add Support for MediaTek PMIC MT6358 Hsin-Hsiung Wang
2019-08-23 3:45 ` [PATCH v5 01/10] mfd: mt6397: clean up code Hsin-Hsiung Wang
2019-08-23 3:45 ` [PATCH v5 02/10] mfd: mt6397: extract irq related code from core driver Hsin-Hsiung Wang
2019-08-23 12:13 ` [BUG] " Frank Wunderlich
2019-08-23 14:56 ` Matthias Brugger
2019-08-23 15:26 ` Frank Wunderlich
2019-08-23 15:42 ` Matthias Brugger
2019-08-23 17:16 ` Aw: " Frank Wunderlich
2019-08-29 6:24 ` Hsin-hsiung Wang
2019-09-19 18:59 ` Frank Wunderlich
2019-09-30 19:44 ` Aw: " Frank Wunderlich
2019-08-23 15:35 ` Frank Wunderlich
2019-08-23 15:53 ` Frank Wunderlich
2019-08-23 14:53 ` Matthias Brugger
2019-08-23 3:45 ` [PATCH v5 03/10] mfd: mt6397: modify suspend/resume behavior Hsin-Hsiung Wang
2019-08-23 15:12 ` Matthias Brugger
2019-08-23 3:45 ` [PATCH v5 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-08-23 3:45 ` Hsin-Hsiung Wang [this message]
2019-08-28 10:44 ` [PATCH v5 05/10] regulator: Add document for MT6358 regulator Mark Brown
2019-08-28 13:13 ` Applied "regulator: Add document for MT6358 regulator" to the regulator tree Mark Brown
2019-08-23 3:45 ` [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-12-02 8:06 ` Pi-Hsun Shih
2019-12-06 8:55 ` Hsin-hsiung Wang
2019-08-23 3:45 ` [PATCH v5 07/10] regulator: mt6358: Add support for MT6358 regulator Hsin-Hsiung Wang
2019-08-28 10:45 ` Mark Brown
2019-08-29 6:09 ` Hsin-hsiung Wang
2019-08-28 13:13 ` Applied "regulator: mt6358: Add support for MT6358 regulator" to the regulator tree Mark Brown
2019-08-23 3:45 ` [PATCH v5 08/10] arm64: dts: mt6358: add PMIC MT6358 related nodes Hsin-Hsiung Wang
2019-08-23 3:45 ` [PATCH v5 09/10] rtc: mt6397: fix alarm register overwrite Hsin-Hsiung Wang
2019-08-23 15:35 ` Matthias Brugger
2019-08-29 5:34 ` Hsin-hsiung Wang
2019-08-23 3:45 ` [PATCH v5 10/10] rtc: mt6397: Add support for the MediaTek MT6358 RTC Hsin-Hsiung Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566531931-9772-6-git-send-email-hsin-hsiung.wang@mediatek.com \
--to=hsin-hsiung.wang@mediatek.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=kstewart@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=rfontana@redhat.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).