Linux-RTC Archive on
 help / color / Atom feed
* [GIT PULL] RTC for 5.6
@ 2020-02-03 22:32 Alexandre Belloni
  2020-02-04  8:05 ` pr-tracker-bot
  0 siblings, 1 reply; 2+ messages in thread
From: Alexandre Belloni @ 2020-02-03 22:32 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: linux-rtc, linux-kernel

Hello Linus,

Here is the pull-request for the RTC subsystem for 5.6.

The VL_READ and VL_CLR ioctls have been reworked to be more useful. This
will not break userspace as there are very few users and they are using
the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  git:// tags/rtc-5.6

for you to fetch changes up to f45719240700398b63a165f6b7f3fbab04f0b052:

  dt-bindings: rtc: at91rm9200: document clocks property (2020-01-28 22:48:34 +0100)

RTC for 5.6

 - the VL_READ and VL_CLR ioctls are now documented and their behavior is
   unified across all the drivers.
 - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
   REGMAP_SPI unecessarily.

 - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
 - cmos: solve lost interrupts issue on MS Surface 3
 - hym8563: return proper errno when time is invalid
 - rv3029: many fixes, nvram support

Alexandre Belloni (44):
      mailmap: Update email address for Alexandre Belloni
      rtc: define RTC_VL_READ values
      rtc: Document RTC_VL_READ and RTC_VL_CLR ioctls
      rtc: abx80x: return meaningful value for RTC_VL_READ
      rtc: pcf2127: return meaningful value for RTC_VL_READ
      rtc: pcf8523: return meaningful value for RTC_VL_READ
      rtc: pcf8563: remove RTC_VL_CLR handling
      rtc: pcf8563: remove conditional compilation
      rtc: pcf8563: stop caching voltage_low
      rtc: pcf8563: return meaningful value for RTC_VL_READ
      rtc: pcf85063: remove RTC_VL_CLR handling
      rtc: pcf85063: return meaningful value for RTC_VL_READ
      rtc: rv3028: remove RTC_VL_CLR handling
      rtc: rv3028: return meaningful value for RTC_VL_READ
      rtc: rv8803: avoid clearing RV8803_FLAG_V2F in RTC_VL_CLR
      rtc: rv8803: return meaningful value for RTC_VL_READ
      rtc: rx8010: remove RTC_VL_CLR handling
      rtc: rx8010: return meaningful value for RTC_VL_READ
      rtc: rv3029: use proper name for the driver
      rtc: rv3029: let regmap validate the register ranges
      rtc: rv3029: remove open coded regmap_update_bits
      rtc: rv3029: remove race condition when update STATUS
      rtc: rv3029: avoid reading the status register uselessly
      rtc: rv3029: get rid of rv3029_get_sr
      rtc: rv3029: simplify rv3029_alarm_irq_enable
      rtc: rv3029: simplify rv3029_set_alarm
      rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs
      rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support
      rtc: rv3029: correctly handle PON and VLOW2
      rtc: rv3029: convert to devm_rtc_allocate_device
      rtc: rv3029: let the core handle rtc range
      rtc: rv3029: add nvram support
      rtc: rv3029: drop deprecated compatbiles
      rtc: rv3029: annotate init and exit functions
      rtc: rv3029: remove useless error messages
      rtc: at91rm9200: remove procfs information
      dt-bindings: rtc: at91rm9200: convert bindings to json-schema
      rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
      rtc: at91rm9200: move register definitions to C file
      rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
      rtc: at91rm9200: use FIELD_PREP/FIELD_GET
      rtc: Kconfig: properly indent sd3078 entry
      rtc: Kconfig: select REGMAP_I2C when necessary
      dt-bindings: rtc: at91rm9200: document clocks property

Andy Shevchenko (3):
      rtc: cmos: Stop using shared IRQ
      rtc: cmos: Use predefined value for RTC IRQ on legacy x86
      rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper

Chuhong Yuan (2):
      rtc: stm32: add missed clk_disable_unprepare in error path of resume
      rtc: asm9260: add the missed check for devm_clk_get

Claudiu Beznea (1):
      dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc

Dmitry Osipenko (1):
      rtc: tps6586x: Use IRQ_NOAUTOEN flag

Geert Uytterhoeven (1):
      rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed

Jean-Francois Dagenais (1):
      rtc: zynqmp: re-use rtc_time64_to_tm operation

Linus Walleij (1):
      rtc: ds1343: Do not hardcode SPI mode flags

Nobuhiro Iwamatsu (5):
      rtc: rx8010: Fix return code for rx8010_probe
      rtc: rx8025: Remove struct i2c_client from struct rx8025_data
      rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
      rtc: moxart: Convert to SPDX identifier
      rtc: pcf8563: Use BIT

Paul Kocialkowski (2):
      rtc: hym8563: Return -EINVAL if the time is known to be invalid
      rtc: hym8563: Read the valid flag directly instead of caching it

Wei Yongjun (1):
      rtc: mt6397: drop free_irq of devm_ allocated irq

zhengbin (1):
      rtc: omap: Remove unneeded semicolon

 .mailmap                                           |   1 +
 Documentation/ABI/testing/rtc-cdev                 |   8 +
 .../bindings/rtc/atmel,at91rm9200-rtc.txt          |  17 -
 .../bindings/rtc/atmel,at91rm9200-rtc.yaml         |  49 +++
 drivers/rtc/Kconfig                                |  24 +-
 drivers/rtc/rtc-abx80x.c                           |   7 +-
 drivers/rtc/rtc-asm9260.c                          |   3 +
 drivers/rtc/rtc-at91rm9200.c                       | 119 +++---
 drivers/rtc/rtc-at91rm9200.h                       |  71 ----
 drivers/rtc/rtc-cmos.c                             |  12 +-
 drivers/rtc/rtc-ds1343.c                           |  10 +-
 drivers/rtc/rtc-hym8563.c                          |  19 +-
 drivers/rtc/rtc-moxart.c                           |   5 +-
 drivers/rtc/rtc-mt6397.c                           |  10 +-
 drivers/rtc/rtc-omap.c                             |   2 +-
 drivers/rtc/rtc-pcf2127.c                          |   6 +-
 drivers/rtc/rtc-pcf85063.c                         |  16 +-
 drivers/rtc/rtc-pcf8523.c                          |   6 +-
 drivers/rtc/rtc-pcf8563.c                          |  40 +-
 drivers/rtc/rtc-rv3028.c                           |  17 +-
 drivers/rtc/rtc-rv3029c2.c                         | 442 +++++++++------------
 drivers/rtc/rtc-rv8803.c                           |  16 +-
 drivers/rtc/rtc-rx8010.c                           |  25 +-
 drivers/rtc/rtc-rx8025.c                           |  27 +-
 drivers/rtc/rtc-stm32.c                            |   5 +-
 drivers/rtc/rtc-tps6586x.c                         |   4 +-
 drivers/rtc/rtc-zynqmp.c                           |   4 +-
 include/linux/rtc.h                                |   1 +
 include/uapi/linux/rtc.h                           |   7 +-
 29 files changed, 415 insertions(+), 558 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
 delete mode 100644 drivers/rtc/rtc-at91rm9200.h

Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [GIT PULL] RTC for 5.6
  2020-02-03 22:32 [GIT PULL] RTC for 5.6 Alexandre Belloni
@ 2020-02-04  8:05 ` pr-tracker-bot
  0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2020-02-04  8:05 UTC (permalink / raw)
  To: Alexandre Belloni; +Cc: Linus Torvalds, linux-rtc, linux-kernel

The pull request you sent on Mon, 3 Feb 2020 23:32:40 +0100:

> git:// tags/rtc-5.6

has been merged into torvalds/linux.git:

Thank you!

Deet-doot-dot, I am a bot.

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-03 22:32 [GIT PULL] RTC for 5.6 Alexandre Belloni
2020-02-04  8:05 ` pr-tracker-bot

Linux-RTC Archive on

Archives are clonable:
	git clone --mirror linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ \
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone