linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 0/1] Compatible with NCT3015Y-R and NCT3018Y-R
@ 2023-11-13 10:38 Mia Lin
  2023-11-13 10:38 ` [PATCH v7 1/1] rtc: nuvoton: " Mia Lin
  2024-01-18  0:26 ` [PATCH v7 0/1] " Alexandre Belloni
  0 siblings, 2 replies; 3+ messages in thread
From: Mia Lin @ 2023-11-13 10:38 UTC (permalink / raw)
  To: avifishman70, tmaimon77, tali.perry1, venture, yuenn,
	benjaminfair, a.zummo, alexandre.belloni, KWLIU, JJLIU0, KFLIN,
	mylin1
  Cc: openbmc, linux-rtc, linux-kernel, Mia Lin

Changes since version 7:
  Fix the part number parameter checking issue.

Changes since version 6:
  Move the part number parameter to struct nct3018y.

Changes since version 5:
  Add global parameter to store part number.
  Remove unnecessary changes for easier reading.

Changes since version 4:
  Add an introduction bewteen NCT3015Y-R and NCT3018Y-R.
  Restore the initial value of err in nct3018y_rtc_set_time().
  Refine error messages to pinpoint the correct location.

Changes since version 3:
  Remove the comparison between DT compatible and chip data.

Changes since version 2:
  Add DT compatible to check the chip matches or not.

Changes since version 1:
  rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R

Mia Lin (1):
  rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R

 drivers/rtc/rtc-nct3018y.c | 52 +++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 6 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v7 1/1] rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
  2023-11-13 10:38 [PATCH v7 0/1] Compatible with NCT3015Y-R and NCT3018Y-R Mia Lin
@ 2023-11-13 10:38 ` Mia Lin
  2024-01-18  0:26 ` [PATCH v7 0/1] " Alexandre Belloni
  1 sibling, 0 replies; 3+ messages in thread
From: Mia Lin @ 2023-11-13 10:38 UTC (permalink / raw)
  To: avifishman70, tmaimon77, tali.perry1, venture, yuenn,
	benjaminfair, a.zummo, alexandre.belloni, KWLIU, JJLIU0, KFLIN,
	mylin1
  Cc: openbmc, linux-rtc, linux-kernel, Mia Lin

The NCT3015Y-R and NCT3018Y-R use the same datasheet
    but have different topologies as follows.
- Topology (Only 1st i2c can set TWO bit and HF bit)
  In NCT3015Y-R,
    rtc 1st i2c is connected to a host CPU
    rtc 2nd i2c is connected to a BMC
  In NCT3018Y-R,
    rtc 1st i2c is connected to a BMC
    rtc 2nd i2c is connected to a host CPU
In order to be compatible with NCT3015Y-R and NCT3018Y-R,
- In probe,
  If part number is NCT3018Y-R, only set HF bit to 24-Hour format.
  Else, do nothing
- In set_time,
  If part number is NCT3018Y-R && TWO bit is 0,
     change TWO bit to 1, and restore TWO bit after updating time.

Signed-off-by: Mia Lin <mimi05633@gmail.com>
---
Changes since version 7:
  Fix the part number parameter checking issue.

 drivers/rtc/rtc-nct3018y.c | 52 +++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-nct3018y.c b/drivers/rtc/rtc-nct3018y.c
index ed4e606be8e5..f488a189a465 100644
--- a/drivers/rtc/rtc-nct3018y.c
+++ b/drivers/rtc/rtc-nct3018y.c
@@ -23,6 +23,7 @@
 #define NCT3018Y_REG_CTRL	0x0A /* timer control */
 #define NCT3018Y_REG_ST		0x0B /* status */
 #define NCT3018Y_REG_CLKO	0x0C /* clock out */
+#define NCT3018Y_REG_PART	0x21 /* part info */
 
 #define NCT3018Y_BIT_AF		BIT(7)
 #define NCT3018Y_BIT_ST		BIT(7)
@@ -37,10 +38,12 @@
 #define NCT3018Y_REG_BAT_MASK		0x07
 #define NCT3018Y_REG_CLKO_F_MASK	0x03 /* frequenc mask */
 #define NCT3018Y_REG_CLKO_CKE		0x80 /* clock out enabled */
+#define NCT3018Y_REG_PART_NCT3018Y	0x02
 
 struct nct3018y {
 	struct rtc_device *rtc;
 	struct i2c_client *client;
+	int part_num;
 #ifdef CONFIG_COMMON_CLK
 	struct clk_hw clkout_hw;
 #endif
@@ -177,8 +180,27 @@ static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct nct3018y *nct3018y = dev_get_drvdata(dev);
 	unsigned char buf[4] = {0};
-	int err;
+	int err, flags;
+	int restore_flags = 0;
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
+	if (flags < 0) {
+		dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_CTRL.\n");
+		return flags;
+	}
+
+	/* Check and set TWO bit */
+	if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y && !(flags & NCT3018Y_BIT_TWO)) {
+		restore_flags = 1;
+		flags |= NCT3018Y_BIT_TWO;
+		err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+		if (err < 0) {
+			dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
+			return err;
+		}
+	}
 
 	buf[0] = bin2bcd(tm->tm_sec);
 	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SC, buf[0]);
@@ -212,6 +234,18 @@ static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		return -EIO;
 	}
 
+	/* Restore TWO bit */
+	if (restore_flags) {
+		if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y)
+			flags &= ~NCT3018Y_BIT_TWO;
+
+		err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+		if (err < 0) {
+			dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
+			return err;
+		}
+	}
+
 	return err;
 }
 
@@ -479,11 +513,17 @@ static int nct3018y_probe(struct i2c_client *client)
 		dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__);
 	}
 
-	flags = NCT3018Y_BIT_TWO;
-	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
-	if (err < 0) {
-		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");
-		return err;
+	nct3018y->part_num = i2c_smbus_read_byte_data(client, NCT3018Y_REG_PART);
+	if (nct3018y->part_num < 0) {
+		dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_PART.\n");
+		return nct3018y->part_num;
+	} else if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) {
+		flags = NCT3018Y_BIT_HF;
+		err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+		if (err < 0) {
+			dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
+			return err;
+		}
 	}
 
 	flags = 0;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v7 0/1] Compatible with NCT3015Y-R and NCT3018Y-R
  2023-11-13 10:38 [PATCH v7 0/1] Compatible with NCT3015Y-R and NCT3018Y-R Mia Lin
  2023-11-13 10:38 ` [PATCH v7 1/1] rtc: nuvoton: " Mia Lin
@ 2024-01-18  0:26 ` Alexandre Belloni
  1 sibling, 0 replies; 3+ messages in thread
From: Alexandre Belloni @ 2024-01-18  0:26 UTC (permalink / raw)
  To: avifishman70, tmaimon77, tali.perry1, venture, yuenn,
	benjaminfair, a.zummo, KWLIU, JJLIU0, KFLIN, mylin1, Mia Lin
  Cc: openbmc, linux-rtc, linux-kernel

On Mon, 13 Nov 2023 18:38:06 +0800, Mia Lin wrote:
> Changes since version 7:
>   Fix the part number parameter checking issue.
> 
> Changes since version 6:
>   Move the part number parameter to struct nct3018y.
> 
> Changes since version 5:
>   Add global parameter to store part number.
>   Remove unnecessary changes for easier reading.
> 
> [...]

Applied, thanks!

[1/1] rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
      https://git.kernel.org/abelloni/c/14688f1a91e1

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2024-01-18  0:27 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-13 10:38 [PATCH v7 0/1] Compatible with NCT3015Y-R and NCT3018Y-R Mia Lin
2023-11-13 10:38 ` [PATCH v7 1/1] rtc: nuvoton: " Mia Lin
2024-01-18  0:26 ` [PATCH v7 0/1] " Alexandre Belloni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).