From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH] rtc: pcf2123: Add Microcrystal rv2123
Date: Tue, 18 Dec 2018 22:42:23 +0100 [thread overview]
Message-ID: <20181218214223.15981-1-alexandre.belloni@bootlin.com> (raw)
Add a compatible string for Microcrystal rv2123 as the reset procedure seem
to be differing. However, the current driver works just fine.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt | 1 +
drivers/rtc/rtc-pcf2123.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
index 811124a36d16..1994f601800a 100644
--- a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
+++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
@@ -2,6 +2,7 @@ NXP PCF2123 SPI Real Time Clock
Required properties:
- compatible: should be: "nxp,rtc-pcf2123"
+ or "microcrystal,rv2123"
- reg: should be the SPI slave chipselect address
Optional properties:
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index e5222c5d8223..39da8b214275 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -453,6 +453,7 @@ static int pcf2123_remove(struct spi_device *spi)
#ifdef CONFIG_OF
static const struct of_device_id pcf2123_dt_ids[] = {
{ .compatible = "nxp,rtc-pcf2123", },
+ { .compatible = "microcrystal,rv2123", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
--
2.20.0
reply other threads:[~2018-12-18 21:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181218214223.15981-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).