[PATCH] rtc: isl1208: fix negative digital trim reporting

[Trent Piepho <tpiepho@impinj.com>]

isl1208_i2c_get_dtr() was returning the dtr value directly, but could
also return a negative error code.  Negative trimming values, e.g. -20,
would get interpreted as an error code, e.g. -ENOTDIR.

This patch offsets the dtr value by 100 so it's positive and won't alias
an error code.

Also fix check that considered a return value of -1 to be success.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/rtc/rtc-isl1208.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 53e965888ead..320dd15331f4 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -200,6 +200,7 @@ isl1208_i2c_get_atr(struct i2c_client *client)
 	return atr;
 }
 
+/* returns adjustment value + 100 */
 static int
 isl1208_i2c_get_dtr(struct i2c_client *client)
 {
@@ -210,7 +211,7 @@ isl1208_i2c_get_dtr(struct i2c_client *client)
 	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
 	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
 
-	return dtr;
+	return dtr + 100;
 }
 
 static int
@@ -287,8 +288,8 @@ isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
 		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
 
 	dtr = isl1208_i2c_get_dtr(client);
-	if (dtr >= 0 - 1)
-		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+	if (dtr >= 0)
+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
 
 	atr = isl1208_i2c_get_atr(client);
 	if (atr >= 0)
@@ -677,7 +678,7 @@ isl1208_sysfs_show_dtrim(struct device *dev,
 	if (dtr < 0)
 		return dtr;
 
-	return sprintf(buf, "%d ppm\n", dtr);
+	return sprintf(buf, "%d ppm\n", dtr - 100);
 }
 
 static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
-- 
2.14.4