linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
@ 2019-01-17 18:46 Artem Panfilov
  2019-01-30 21:48 ` Alexandre Belloni
  0 siblings, 1 reply; 4+ messages in thread
From: Artem Panfilov @ 2019-01-17 18:46 UTC (permalink / raw)
  Cc: panfilov.artyom, Alessandro Zummo, Alexandre Belloni,
	linux-kernel, linux-rtc

This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar
module with I2C interface.

Changes v1->v2:
-remove a package denomination in variable names and files.
-fix read/write time registers length.
-replace regmap_update_bits with regmap_write during probing.
-add a check and reset for PON, V2F, V1F registers.
-rename registers according to the datasheet.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
---
 drivers/rtc/Kconfig       |  10 +
 drivers/rtc/Makefile      |   1 +
 drivers/rtc/rtc-ab-eoz9.c | 445 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 456 insertions(+)
 create mode 100644 drivers/rtc/rtc-ab-eoz9.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 225b0b8516f3..ea0780a7f1bf 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -185,6 +185,16 @@ config RTC_DRV_ABB5ZES3
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ab-b5ze-s3.
 
+config RTC_DRV_ABEOZ9
+	select REGMAP_I2C
+	tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
+	help
+	  If you say yes here you get support for the Abracon
+	  AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ab-e0z9.
+
 config RTC_DRV_ABX80X
 	tristate "Abracon ABx80x"
 	select WATCHDOG_CORE if WATCHDOG
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index df022d820bee..974252647087 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X)	+= rtc-88pm860x.o
 obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
 obj-$(CONFIG_RTC_DRV_AB8500)	+= rtc-ab8500.o
 obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABEOZ9)	+= rtc-ab-eoz9.o
 obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
 obj-$(CONFIG_RTC_DRV_AC100)	+= rtc-ac100.o
 obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
diff --git a/drivers/rtc/rtc-ab-eoz9.c b/drivers/rtc/rtc-ab-eoz9.c
new file mode 100644
index 000000000000..6702e81fd302
--- /dev/null
+++ b/drivers/rtc/rtc-ab-eoz9.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock driver for AB-RTCMC-32.768kHz-EOZ9 chip.
+ * Copyright (C) 2019 Orolia
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ABEOZ9_REG_CTRL1		0x00
+#define ABEOZ9_REG_CTRL1_MASK		GENMASK(7, 0)
+#define ABEOZ9_REG_CTRL1_WE		BIT(0)
+#define ABEOZ9_REG_CTRL1_TE		BIT(1)
+#define ABEOZ9_REG_CTRL1_TAR		BIT(2)
+#define ABEOZ9_REG_CTRL1_EERE		BIT(3)
+#define ABEOZ9_REG_CTRL1_SRON		BIT(4)
+#define ABEOZ9_REG_CTRL1_TD0		BIT(5)
+#define ABEOZ9_REG_CTRL1_TD1		BIT(6)
+#define ABEOZ9_REG_CTRL1_CLKINT		BIT(7)
+
+#define ABEOZ9_REG_CTRL_INT		0x01
+#define ABEOZ9_REG_CTRL_INT_AIE		BIT(0)
+#define ABEOZ9_REG_CTRL_INT_TIE		BIT(1)
+#define ABEOZ9_REG_CTRL_INT_V1IE	BIT(2)
+#define ABEOZ9_REG_CTRL_INT_V2IE	BIT(3)
+#define ABEOZ9_REG_CTRL_INT_SRIE	BIT(4)
+
+#define ABEOZ9_REG_CTRL_INT_FLAG	0x02
+#define ABEOZ9_REG_CTRL_INT_FLAG_AF	BIT(0)
+#define ABEOZ9_REG_CTRL_INT_FLAG_TF	BIT(1)
+#define ABEOZ9_REG_CTRL_INT_FLAG_V1IF	BIT(2)
+#define ABEOZ9_REG_CTRL_INT_FLAG_V2IF	BIT(3)
+#define ABEOZ9_REG_CTRL_INT_FLAG_SRF	BIT(4)
+
+#define ABEOZ9_REG_CTRL_STATUS		0x03
+#define ABEOZ9_REG_CTRL_STATUS_V1F	BIT(2)
+#define ABEOZ9_REG_CTRL_STATUS_V2F	BIT(3)
+#define ABEOZ9_REG_CTRL_STATUS_SR	BIT(4)
+#define ABEOZ9_REG_CTRL_STATUS_PON	BIT(5)
+#define ABEOZ9_REG_CTRL_STATUS_EEBUSY	BIT(7)
+
+#define ABEOZ9_REG_SEC			0x08
+#define ABEOZ9_REG_MIN			0x09
+#define ABEOZ9_REG_HOURS		0x0A
+#define ABEOZ9_HOURS_PM			BIT(6)
+#define ABEOZ9_REG_DAYS			0x0B
+#define ABEOZ9_REG_WEEKDAYS		0x0C
+#define ABEOZ9_REG_MONTHS		0x0D
+#define ABEOZ9_REG_YEARS		0x0E
+
+#define ABEOZ9_SEC_LEN			7
+
+#define ABEOZ9_REG_REG_TEMP		0x20
+#define ABEOZ953_TEMP_MAX		120
+#define ABEOZ953_TEMP_MIN		-60
+
+#define ABEOZ9_REG_EEPROM		0x30
+#define ABEOZ9_REG_EEPROM_MASK		GENMASK(8, 0)
+#define ABEOZ9_REG_EEPROM_THP		BIT(0)
+#define ABEOZ9_REG_EEPROM_THE		BIT(1)
+#define ABEOZ9_REG_EEPROM_FD0		BIT(2)
+#define ABEOZ9_REG_EEPROM_FD1		BIT(3)
+#define ABEOZ9_REG_EEPROM_R1K		BIT(4)
+#define ABEOZ9_REG_EEPROM_R5K		BIT(5)
+#define ABEOZ9_REG_EEPROM_R20K		BIT(6)
+#define ABEOZ9_REG_EEPROM_R80K		BIT(7)
+
+struct abeoz9_rtc_data {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+	struct device *hwmon_dev;
+};
+
+static int abeoz9_check_validity(struct device *dev)
+{
+	struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	int ret;
+	int val;
+
+	ret = regmap_read(regmap, ABEOZ9_REG_CTRL_STATUS, &val);
+	if (ret < 0) {
+		dev_err(dev,
+			"unable to set CTRL_STATUS register (%d)\n", ret);
+		return ret;
+	}
+
+	if (val & ABEOZ9_REG_CTRL_STATUS_PON) {
+		dev_warn(dev, "power-on reset detected, date is invalid\n");
+		return -EINVAL;
+	}
+
+	if (val & ABEOZ9_REG_CTRL_STATUS_V1F) {
+		dev_warn(dev,
+			 "voltage drops below VLOW1 threshold, date is invalid\n");
+		return -EINVAL;
+	}
+
+	if ((val & ABEOZ9_REG_CTRL_STATUS_V2F)) {
+		dev_warn(dev,
+			 "voltage drops below VLOW2 threshold, date is invalid\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int abeoz9_reset_validity(struct regmap *regmap)
+{
+	return regmap_update_bits(regmap, ABEOZ9_REG_CTRL_STATUS,
+				  ABEOZ9_REG_CTRL_STATUS_V1F |
+				  ABEOZ9_REG_CTRL_STATUS_V2F |
+				  ABEOZ9_REG_CTRL_STATUS_PON,
+				  0);
+}
+
+static int abeoz9_rtc_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABEOZ9_SEC_LEN];
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, ABEOZ9_REG_SEC,
+			       regs,
+			       sizeof(regs));
+	if (ret) {
+		dev_err(dev, "reading RTC time failed (%d)\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(regs[ABEOZ9_REG_SEC - ABEOZ9_REG_SEC] & 0x7F);
+	tm->tm_min = bcd2bin(regs[ABEOZ9_REG_MIN - ABEOZ9_REG_SEC] & 0x7F);
+
+	if (regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & ABEOZ9_HOURS_PM) {
+		tm->tm_hour =
+			bcd2bin(regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & 0x1f);
+		if (regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] & ABEOZ9_HOURS_PM)
+			tm->tm_hour += 12;
+	} else {
+		tm->tm_hour = bcd2bin(regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC]);
+	}
+
+	tm->tm_mday = bcd2bin(regs[ABEOZ9_REG_DAYS - ABEOZ9_REG_SEC]);
+	tm->tm_wday = bcd2bin(regs[ABEOZ9_REG_WEEKDAYS - ABEOZ9_REG_SEC]);
+	tm->tm_mon  = bcd2bin(regs[ABEOZ9_REG_MONTHS - ABEOZ9_REG_SEC]) - 1;
+	tm->tm_year = bcd2bin(regs[ABEOZ9_REG_YEARS - ABEOZ9_REG_SEC]) + 100;
+
+	return abeoz9_check_validity(dev);
+}
+
+static int abeoz9_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	u8 regs[ABEOZ9_SEC_LEN];
+	int ret;
+
+	regs[ABEOZ9_REG_SEC - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_sec);
+	regs[ABEOZ9_REG_MIN - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_min);
+	regs[ABEOZ9_REG_HOURS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_hour);
+	regs[ABEOZ9_REG_DAYS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_mday);
+	regs[ABEOZ9_REG_WEEKDAYS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_wday);
+	regs[ABEOZ9_REG_MONTHS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_mon + 1);
+	regs[ABEOZ9_REG_YEARS - ABEOZ9_REG_SEC] = bin2bcd(tm->tm_year - 100);
+
+	ret = regmap_bulk_write(data->regmap, ABEOZ9_REG_SEC,
+				regs,
+				sizeof(regs));
+
+	return abeoz9_reset_validity(regmap);
+}
+
+static int abeoz9_trickle_parse_dt(struct device_node *node)
+{
+	u32 ohms = 0;
+
+	if (of_property_read_u32(node, "trickle-resistor-ohms", &ohms))
+		return 0;
+
+	switch (ohms) {
+	case 1000:
+		return ABEOZ9_REG_EEPROM_R1K;
+	case 5000:
+		return ABEOZ9_REG_EEPROM_R5K;
+	case 20000:
+		return ABEOZ9_REG_EEPROM_R20K;
+	case 80000:
+		return ABEOZ9_REG_EEPROM_R80K;
+	default:
+		return 0;
+	}
+}
+
+static int abeoz9_rtc_setup(struct device *dev, struct device_node *node)
+{
+	struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	int ret;
+
+	/* Enable Self Recovery, Clock for Watch and EEPROM refresh functions */
+	ret = regmap_update_bits(regmap, ABEOZ9_REG_CTRL1,
+				 ABEOZ9_REG_CTRL1_MASK,
+				 ABEOZ9_REG_CTRL1_WE |
+				 ABEOZ9_REG_CTRL1_EERE |
+				 ABEOZ9_REG_CTRL1_SRON);
+	if (ret < 0) {
+		dev_err(dev, "unable to set CTRL_1 register (%d)\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(regmap, ABEOZ9_REG_CTRL_INT, 0);
+	if (ret < 0) {
+		dev_err(dev,
+			"unable to set control CTRL_INT register (%d)\n",
+			ret);
+		return ret;
+	}
+
+	ret = regmap_write(regmap, ABEOZ9_REG_CTRL_INT_FLAG, 0);
+	if (ret < 0) {
+		dev_err(dev,
+			"unable to set control CTRL_INT_FLAG register (%d)\n",
+			ret);
+		return ret;
+	}
+
+	ret = abeoz9_trickle_parse_dt(node);
+
+	/* Enable built-in termometer */
+	ret |= ABEOZ9_REG_EEPROM_THE;
+
+	ret = regmap_update_bits(regmap, ABEOZ9_REG_EEPROM,
+				 ABEOZ9_REG_EEPROM_MASK,
+				 ret);
+	if (ret < 0) {
+		dev_err(dev, "unable to set EEPROM register (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+	.read_time = abeoz9_rtc_get_time,
+	.set_time  = abeoz9_rtc_set_time,
+};
+
+static const struct regmap_config abeoz9_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+#if IS_REACHABLE(CONFIG_HWMON)
+
+static int abeoz9z3_temp_read(struct device *dev,
+			      enum hwmon_sensor_types type,
+			      u32 attr, int channel, long *temp)
+{
+	struct abeoz9_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	int ret;
+	unsigned int regval = 37;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ret = regmap_read(regmap, ABEOZ9_REG_REG_TEMP, &regval);
+		if (ret < 0)
+			return ret;
+		*temp = 1000 * (regval + ABEOZ953_TEMP_MIN);
+		return 0;
+	case hwmon_temp_max:
+		*temp = 1000 * ABEOZ953_TEMP_MAX;
+		return 0;
+	case hwmon_temp_min:
+		*temp = 1000 * ABEOZ953_TEMP_MIN;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t abeoz9_is_visible(const void *data,
+				 enum hwmon_sensor_types type,
+				 u32 attr, int channel)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_max:
+	case hwmon_temp_min:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static const u32 abeoz9_chip_config[] = {
+	HWMON_C_REGISTER_TZ,
+	0
+};
+
+static const struct hwmon_channel_info abeoz9_chip = {
+	.type = hwmon_chip,
+	.config = abeoz9_chip_config,
+};
+
+static const u32 abeoz9_temp_config[] = {
+	HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN,
+	0
+};
+
+static const struct hwmon_channel_info abeoz9_temp = {
+	.type = hwmon_temp,
+	.config = abeoz9_temp_config,
+};
+
+static const struct hwmon_channel_info *abeoz9_info[] = {
+	&abeoz9_chip,
+	&abeoz9_temp,
+	NULL
+};
+
+static const struct hwmon_ops abeoz9_hwmon_ops = {
+	.is_visible = abeoz9_is_visible,
+	.read = abeoz9z3_temp_read,
+};
+
+static const struct hwmon_chip_info abeoz9_chip_info = {
+	.ops = &abeoz9_hwmon_ops,
+	.info = abeoz9_info,
+};
+
+static void abeoz9_hwmon_register(struct device *dev,
+				  struct abeoz9_rtc_data *data)
+{
+	data->hwmon_dev =
+		devm_hwmon_device_register_with_info(dev,
+						     "abeoz9",
+						     data,
+						     &abeoz9_chip_info,
+						     NULL);
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_warn(dev, "unable to register hwmon device %ld\n",
+			 PTR_ERR(data->hwmon_dev));
+	}
+}
+
+#else
+
+static void abeoz9_hwmon_register(struct device *dev,
+				  struct abeoz9_rtc_data *data)
+{
+}
+
+#endif /* CONFIG_RTC_DRV_ABEOZ9_HWMON */
+
+static int abeoz9_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct abeoz9_rtc_data *data = NULL;
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &abeoz9_rtc_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "regmap allocation failed: %d\n", ret);
+		goto err;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->regmap = regmap;
+	dev_set_drvdata(dev, data);
+
+	ret = abeoz9_rtc_setup(dev, client->dev.of_node);
+	if (ret)
+		goto err;
+
+	data->rtc = devm_rtc_allocate_device(dev);
+	ret = PTR_ERR_OR_ZERO(data->rtc);
+	if (ret)
+		goto err;
+
+	data->rtc->ops = &rtc_ops;
+	data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	data->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	ret = rtc_register_device(data->rtc);
+	if (ret)
+		goto err;
+
+	abeoz9_hwmon_register(dev, data);
+	return 0;
+err:
+	dev_err(dev, "unable to register RTC device (%d)\n", ret);
+	return ret;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id abeoz9_dt_match[] = {
+	{ .compatible = "abracon,abeoz9" },
+	{ },
+};
+#endif
+
+MODULE_DEVICE_TABLE(of, abeoz9_dt_match);
+
+static const struct i2c_device_id abeoz9_id[] = {
+	{ "abeoz9", 0 },
+	{ }
+};
+
+static struct i2c_driver abeoz9_driver = {
+	.driver = {
+		.name = "rtc-ab-eoz9",
+		.of_match_table = of_match_ptr(abeoz9_dt_match),
+	},
+	.probe	  = abeoz9_probe,
+	.id_table = abeoz9_id,
+};
+
+module_i2c_driver(abeoz9_driver);
+
+MODULE_AUTHOR("Artem Panfilov <panfilov.artyom@gmail.com>");
+MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-EOZ9 RTC driver");
+MODULE_LICENSE("GPL");
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-02-04 21:25 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-17 18:46 [PATCH v2 1/2] rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support Artem Panfilov
2019-01-30 21:48 ` Alexandre Belloni
2019-02-03  0:36   ` Artem Panfilov
2019-02-04 21:25     ` Alexandre Belloni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).