Linux-RTC Archive on lore.kernel.org
 help / Atom feed
From: Trent Piepho <tpiepho@impinj.com>
To: "linux-rtc@vger.kernel.org" <linux-rtc@vger.kernel.org>
Cc: Trent Piepho <tpiepho@impinj.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH 3/3] rtc: isl1208: Add new style nvmem support to driver
Date: Fri, 1 Feb 2019 19:42:13 +0000
Message-ID: <20190201194147.25885-3-tpiepho@impinj.com> (raw)
In-Reply-To: <20190201194147.25885-1-tpiepho@impinj.com>

Add support for the RTC's NVRAM using the standard nvmem support that is
part of the Linux RTC framework.

This driver already has a sysfs attribute that provides access to the
RTC's NVRAM as a single 16-bit value.  Some chips have more than two
bytes of NVRAM, so this will not work for them.  It's also non-standard.

This sysfs attribute is left in for backward compatibility, but will only
be able to read the first two bytes of NVRAM.  The nvmem interface will
allow access to all NVRAM, e.g. eight bytes on the isl1218.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/rtc/rtc-isl1208.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 77912ee58011..1be1156aef23 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -114,6 +114,7 @@ MODULE_DEVICE_TABLE(of, isl1208_of_match);
 
 /* Device state */
 struct isl1208_state {
+	struct nvmem_config nvmem_config;
 	struct rtc_device *rtc;
 	const struct isl1208_config *config;
 };
@@ -741,6 +742,46 @@ static const struct attribute_group isl1219_rtc_sysfs_files = {
 	.attrs	= isl1219_rtc_attrs,
 };
 
+static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
+			      size_t count)
+{
+	struct isl1208_state *isl1208 = priv;
+	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
+	int ret;
+
+	/* nvmem sanitizes offset/count for us, but count==0 is possible */
+	if (!count)
+		return count;
+	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
+				    count);
+	return ret == 0 ? count : ret;
+}
+
+static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
+			       size_t count)
+{
+	struct isl1208_state *isl1208 = priv;
+	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
+	int ret;
+
+	/* nvmem sanitizes off/count for us, but count==0 is possible */
+	if (!count)
+		return count;
+	ret = isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
+				   count);
+
+	return ret == 0 ? count : ret;
+}
+
+static const struct nvmem_config isl1208_nvmem_config = {
+	.name = "isl1208_nvram",
+	.word_size = 1,
+	.stride = 1,
+	/* .size from chip specific config */
+	.reg_read = isl1208_nvmem_read,
+	.reg_write = isl1208_nvmem_write,
+};
+
 static int isl1208_setup_irq(struct i2c_client *client, int irq)
 {
 	int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
@@ -797,6 +838,11 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	isl1208->rtc->ops = &isl1208_rtc_ops;
 
+	/* Setup nvmem configuration in driver state struct */
+	isl1208->nvmem_config = isl1208_nvmem_config;
+	isl1208->nvmem_config.size = isl1208->config->nvmem_length;
+	isl1208->nvmem_config.priv = isl1208;
+
 	rc = isl1208_i2c_get_sr(client);
 	if (rc < 0) {
 		dev_err(&client->dev, "reading status failed\n");
-- 
2.14.4


      parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-01 19:42 [PATCH 1/3] rtc: isl1208: Introduce driver state struct Trent Piepho
2019-02-01 19:42 ` [PATCH 2/3] rtc: isl1208: Support more chip variations Trent Piepho
2019-02-10 21:12   ` Alexandre Belloni
2019-02-12  1:30     ` Trent Piepho
2019-02-01 19:42 ` Trent Piepho [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190201194147.25885-3-tpiepho@impinj.com \
    --to=tpiepho@impinj.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org linux-rtc@archiver.kernel.org
	public-inbox-index linux-rtc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox