Linux-RTC Archive on
 help / Atom feed
Cc: Roman Stratiienko <>
Subject: [PATCH v2] rtc: test: enable wakeup flags
Date: Wed, 15 May 2019 17:20:22 +0300
Message-ID: <> (raw)

From: Roman Stratiienko <>

Alarmtimer interface uses only the RTC with wekeup flags enabled.
Allow to use rtc-test driver with alarmtimer interface.

Signed-off-by: Roman Stratiienko <>

Changes in v2:

Wakeup flags applied only for the RTCs with alarm support

 drivers/rtc/rtc-test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index 6c5f09c815e8..473bbb30bc1c 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -133,6 +133,7 @@ static int test_probe(struct platform_device *plat_dev)
 		rtd->rtc->ops = &test_rtc_ops;
+		device_init_wakeup(&plat_dev->dev, 1);
 	timer_setup(&rtd->alarm, test_rtc_alarm_handler, 0);

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 14:20 roman.stratiienko [this message]
2019-05-23 15:45 ` Alexandre Belloni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on

Archives are clonable:
	git clone --mirror linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ \
	public-inbox-index linux-rtc

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox