linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/7] Use MFD framework for SGI IOC3 drivers
@ 2019-06-13 17:06 Thomas Bogendoerfer
  2019-06-13 17:06 ` [PATCH v3 1/7] nvmem: core: add nvmem_device_find Thomas Bogendoerfer
                   ` (6 more replies)
  0 siblings, 7 replies; 11+ messages in thread
From: Thomas Bogendoerfer @ 2019-06-13 17:06 UTC (permalink / raw)
  To: Ralf Baechle, Paul Burton, James Hogan, Dmitry Torokhov,
	Lee Jones, David S. Miller, Srinivas Kandagatla,
	Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
	Jiri Slaby, linux-mips, linux-kernel, linux-input, netdev,
	linux-rtc, linux-serial

SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte  bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.

Changes in v3:
 - use 1-wire subsystem for handling proms
 - pci-xtalk driver uses prom information to create PCI subsystem
   ids for use in MFD driver
 - changed MFD driver to only use static declared mfd_cells
 - added IP30 system board setup to MFD driver
 - mac address is now read from ioc3-eth driver with nvmem framework 

Changes in v2:
 - fixed issue in ioc3kbd.c reported by Dmitry Torokhov
 - merged IP27 RTC removal and 8250 serial driver addition into
   main MFD patch to keep patches bisectable

Thomas Bogendoerfer (7):
  nvmem: core: add nvmem_device_find
  MIPS: PCI: refactor ioc3 special handling
  MIPS: PCI: use information from 1-wire PROM for IOC3 detection
  MIPS: SGI-IP27: remove ioc3 ethernet init
  mfd: ioc3: Add driver for SGI IOC3 chip
  MIPS: SGI-IP27: fix readb/writeb addressing
  Input: add IOC3 serio driver

 arch/mips/include/asm/mach-ip27/mangle-port.h |    4 +-
 arch/mips/include/asm/pci/bridge.h            |    1 +
 arch/mips/include/asm/sn/ioc3.h               |  356 ++---
 arch/mips/pci/pci-xtalk-bridge.c              |  296 ++--
 arch/mips/sgi-ip27/ip27-console.c             |    5 +-
 arch/mips/sgi-ip27/ip27-init.c                |   13 -
 arch/mips/sgi-ip27/ip27-timer.c               |   20 -
 arch/mips/sgi-ip27/ip27-xtalk.c               |   38 +-
 drivers/input/serio/Kconfig                   |   10 +
 drivers/input/serio/Makefile                  |    1 +
 drivers/input/serio/ioc3kbd.c                 |  158 ++
 drivers/mfd/Kconfig                           |   13 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/ioc3.c                            |  683 +++++++++
 drivers/net/ethernet/sgi/Kconfig              |    4 +-
 drivers/net/ethernet/sgi/ioc3-eth.c           | 1932 ++++++++++---------------
 drivers/nvmem/core.c                          |   62 +-
 drivers/rtc/rtc-m48t35.c                      |   11 +
 drivers/tty/serial/8250/8250_ioc3.c           |   98 ++
 drivers/tty/serial/8250/Kconfig               |   11 +
 drivers/tty/serial/8250/Makefile              |    1 +
 include/linux/nvmem-consumer.h                |    9 +
 22 files changed, 2152 insertions(+), 1575 deletions(-)
 create mode 100644 drivers/input/serio/ioc3kbd.c
 create mode 100644 drivers/mfd/ioc3.c
 create mode 100644 drivers/tty/serial/8250/8250_ioc3.c

-- 
2.13.7


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2019-08-09 12:23 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-13 17:06 [PATCH v3 0/7] Use MFD framework for SGI IOC3 drivers Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 1/7] nvmem: core: add nvmem_device_find Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 2/7] MIPS: PCI: refactor ioc3 special handling Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 3/7] MIPS: PCI: use information from 1-wire PROM for IOC3 detection Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 4/7] MIPS: SGI-IP27: remove ioc3 ethernet init Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 6/7] MIPS: SGI-IP27: fix readb/writeb addressing Thomas Bogendoerfer
2019-06-13 17:06 ` [PATCH v3 7/7] Input: add IOC3 serio driver Thomas Bogendoerfer
2019-07-01  8:19   ` Dmitry Torokhov
     [not found] ` <20190613170636.6647-6-tbogendoerfer@suse.de>
2019-07-25 11:47   ` [PATCH v3 5/7] mfd: ioc3: Add driver for SGI IOC3 chip Lee Jones
2019-07-29 18:45     ` Thomas Bogendoerfer
2019-08-09 12:22       ` Alexandre Belloni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).