Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
From: Biwen Li <biwen.li@nxp.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com, leoyang.li@nxp.com
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org,
	xiaobo.xie@nxp.com, jiafei.pan@nxp.com, ran.wang_1@nxp.com,
	Biwen Li <biwen.li@nxp.com>
Subject: [v2,2/2] Documentation: dt: binding: rtc: add binding for ftm alarm driver
Date: Wed, 10 Jul 2019 19:04:24 +0800
Message-ID: <20190710110424.4254-2-biwen.li@nxp.com> (raw)
In-Reply-To: <20190710110424.4254-1-biwen.li@nxp.com>

The patch adds binding for ftm alarm driver

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v2:
    - replace ls1043a with ls1088a as example
    - add rcpm node and fsl,rcpm-wakeup property

 .../devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt  | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
new file mode 100644
index 0000000..010984a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
@@ -0,0 +1,40 @@
+Freescale FlexTimer Module (FTM) Alarm
+
+Note: The driver need work with RCPM driver to wake up system in sleep.
+
+Required properties:
+
+- compatible : Should be "fsl,ftm-alarm" or "fsl,<chip>-ftm-alarm", the
+	       supported chips include
+	       "fsl,ls1012a-ftm-alarm"
+	       "fsl,ls1021a-ftm-alarm"
+	       "fsl,ls1028a-ftm-alarm"
+	       "fsl,ls1043a-ftm-alarm"
+	       "fsl,ls1046a-ftm-alarm"
+	       "fsl,ls1088a-ftm-alarm"
+	       "fsl,ls208xa-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+  FlexTimer Module and base physical address of IP Powerdown Exception Control
+  Register.
+- reg-names: names of the mapped memory regions listed in regs property.
+  should include the following entries:
+  "ftm":    Address of the register sets for FlexTimer Module
+- interrupts : Should be the FlexTimer Module interrupt.
+- fsl,rcpm-wakeup property and rcpm node : Please refer
+	Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+- big-endian: If the host controller is big-endian mode, specify this property.
+  The default endian mode is little-endian.
+
+Example:
+rcpm: rcpm@1e34050 {
+	compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+	reg = <0x0 0x1e34050 0x0 0x4>;
+	fsl,#rcpm-wakeup-cells = <1>;
+}
+
+ftm_alarm0: timer@2800000 {
+	compatible = "fsl,ftm-alarm";
+	reg = <0x0 0x2800000 0x0 0x10000>;
+	fsl,rcpm-wakeup = <&rcpm 0x0 0x4000>;
+	interrupts = <0 44 4>;
+}
-- 
2.7.4


  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-10 11:04 [v2,1/2] rtc/fsl: add FTM alarm driver as the wakeup source Biwen Li
2019-07-10 11:04 ` Biwen Li [this message]
2019-07-10 19:45   ` [v2,2/2] Documentation: dt: binding: rtc: add binding for ftm alarm driver Li Yang
2019-07-10 20:26     ` Rob Herring
2019-07-11 11:04       ` [EXT] " Biwen Li
2019-07-10 21:11 ` [v2,1/2] rtc/fsl: add FTM alarm driver as the wakeup source Li Yang
2019-07-11 14:12 ` Biwen Li

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190710110424.4254-2-biwen.li@nxp.com \
    --to=biwen.li@nxp.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=jiafei.pan@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=ran.wang_1@nxp.com \
    --cc=xiaobo.xie@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org linux-rtc@archiver.kernel.org
	public-inbox-index linux-rtc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox