linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael McCormick <michael.mccormick@enatel.net>
To: <a.zummo@towertech.it>, <linux-rtc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <michael.mccormick@enatel.net>
Subject: [PATCH] rtc: pcf85063: Add pcf85063 clkout control to common clock framework
Date: Mon, 2 Sep 2019 16:37:27 +1200	[thread overview]
Message-ID: <20190902043727.GA24684@michael-Latitude-5590> (raw)

Signed-off-by: Michael McCormick <michael.mccormick@enatel.net>
---
 drivers/rtc/rtc-pcf85063.c | 153 +++++++++++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)

diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 1afa6d9fa9fb..f47d3a6b997d 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -9,6 +9,7 @@
  * Copyright (C) 2019 Micro Crystal AG
  * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
  */
+#include <linux/clk-provider.h>
 #include <linux/i2c.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>
@@ -44,6 +45,16 @@
 #define PCF85063_OFFSET_STEP0          4340
 #define PCF85063_OFFSET_STEP1          4069

+#define PCF85063_REG_CLKO_F_MASK       0x07 /* frequency mask */
+#define PCF85063_REG_CLKO_F_32768HZ    0x00
+#define PCF85063_REG_CLKO_F_16384HZ    0x01
+#define PCF85063_REG_CLKO_F_8192HZ     0x02
+#define PCF85063_REG_CLKO_F_4096HZ     0x03
+#define PCF85063_REG_CLKO_F_2048HZ     0x04
+#define PCF85063_REG_CLKO_F_1024HZ     0x05
+#define PCF85063_REG_CLKO_F_1HZ                0x06
+#define PCF85063_REG_CLKO_F_OFF                0x07
+
 #define PCF85063_REG_RAM               0x03

 #define PCF85063_REG_SC                        0x04 /* datetime */
@@ -61,6 +72,9 @@ struct pcf85063_config {
 struct pcf85063 {
        struct rtc_device       *rtc;
        struct regmap           *regmap;
+#ifdef CONFIG_COMMON_CLK
+       struct clk_hw           clkout_hw;
+#endif
 };

 static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -369,6 +383,140 @@ static int pcf85063_load_capacitance(struct pcf85063 *pcf85063,
                                  PCF85063_REG_CTRL1_CAP_SEL, reg);
 }

+#ifdef CONFIG_COMMON_CLK
+/*
+ * Handling of the clkout
+ */
+
+#define clkout_hw_to_pcf85063(_hw) container_of(_hw, struct pcf85063, clkout_hw)
+
+static int clkout_rates[] = {
+       32768,
+       16384,
+       8192,
+       4096,
+       2048,
+       1024,
+       1,
+};
+
+static unsigned long pcf85063_clkout_recalc_rate(struct clk_hw *hw,
+                                                unsigned long parent_rate)
+{
+       struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+       unsigned int buf;
+       int ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
+
+       if (ret < 0)
+               return 0;
+
+       buf &= PCF85063_REG_CLKO_F_MASK;
+       return clkout_rates[buf];
+}
+
+static long pcf85063_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+                                      unsigned long *prate)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+               if (clkout_rates[i] <= rate)
+                       return clkout_rates[i];
+
+       return 0;
+}
+
+static int pcf85063_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+                                   unsigned long parent_rate)
+{
+       struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+               if (clkout_rates[i] == rate)
+                       return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
+                                                 PCF85063_REG_CLKO_F_MASK, i);
+
+       return -EINVAL;
+}
+
+static int pcf85063_clkout_control(struct clk_hw *hw, bool enable)
+{
+       struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+       unsigned char buf;
+
+       if (enable)
+               buf = PCF85063_REG_CLKO_F_32768HZ;
+       else
+               buf = PCF85063_REG_CLKO_F_OFF;
+
+       return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
+                                 PCF85063_REG_CLKO_F_MASK, buf);
+}
+
+static int pcf85063_clkout_prepare(struct clk_hw *hw)
+{
+       return pcf85063_clkout_control(hw, 1);
+}
+
+static void pcf85063_clkout_unprepare(struct clk_hw *hw)
+{
+       pcf85063_clkout_control(hw, 0);
+}
+
+static int pcf85063_clkout_is_prepared(struct clk_hw *hw)
+{
+       struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+       unsigned int buf;
+       int ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
+
+       if (ret < 0)
+               return 0;
+
+       return (buf & PCF85063_REG_CLKO_F_MASK) != PCF85063_REG_CLKO_F_OFF;
+}
+
+static const struct clk_ops pcf85063_clkout_ops = {
+       .prepare = pcf85063_clkout_prepare,
+       .unprepare = pcf85063_clkout_unprepare,
+       .is_prepared = pcf85063_clkout_is_prepared,
+       .recalc_rate = pcf85063_clkout_recalc_rate,
+       .round_rate = pcf85063_clkout_round_rate,
+       .set_rate = pcf85063_clkout_set_rate,
+};
+
+static struct clk *pcf85063_clkout_register_clk(struct pcf85063 *pcf85063)
+{
+       struct clk *clk;
+       struct clk_init_data init;
+       int ret;
+
+       /* disable the clkout output */
+       ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
+                                PCF85063_REG_CLKO_F_MASK, PCF85063_REG_CLKO_F_OFF);
+       if (ret < 0)
+               return ERR_PTR(ret);
+
+       init.name = "pcf85063-clkout";
+       init.ops = &pcf85063_clkout_ops;
+       init.flags = 0;
+       init.parent_names = NULL;
+       init.num_parents = 0;
+       pcf85063->clkout_hw.init = &init;
+
+       /* optional override of the clockname */
+       of_property_read_string(pcf85063->rtc->dev.of_node, "clock-output-names", &init.name);
+
+       /* register the clock */
+       clk = devm_clk_register(&pcf85063->rtc->dev, &pcf85063->clkout_hw);
+
+       if (!IS_ERR(clk))
+               of_clk_add_provider(pcf85063->rtc->dev.of_node, of_clk_src_simple_get, clk);
+
+       return clk;
+}
+#endif
+
 static const struct pcf85063_config pcf85063a_config = {
        .regmap = {
                .reg_bits = 8,
@@ -469,6 +617,11 @@ static int pcf85063_probe(struct i2c_client *client)
        nvmem_cfg.priv = pcf85063->regmap;
        rtc_nvmem_register(pcf85063->rtc, &nvmem_cfg);

+#ifdef CONFIG_COMMON_CLK
+       /* register clk in common clk framework */
+       pcf85063_clkout_register_clk(pcf85063);
+#endif
+
        return rtc_register_device(pcf85063->rtc);
 }

--
2.17.1



**CONFIDENTIALITY STATEMENT**
This message is intended for the sole use of the individual(s) and/or entity to whom it is addressed, and may contain information that is legally privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended addressee, nor authorized to receive for the intended addressee, you are hereby notified that dissemination, distribution, copying or disclosure of this message is strictly prohibited. If you have received this message in error please immediately advise the sender by reply email, and delete the message.

             reply	other threads:[~2019-09-02  4:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-02  4:37 Michael McCormick [this message]
2020-01-22 22:07 ` [PATCH] rtc: pcf85063: Add pcf85063 clkout control to common clock framework Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902043727.GA24684@michael-Latitude-5590 \
    --to=michael.mccormick@enatel.net \
    --cc=a.zummo@towertech.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).