Hi Alessandro, Alexandre, > This change adds support for 'century bits' on 4162 family of RTC > devices (from ST or microcrystal), which allow storing time beyond > year 2099. > > For rv4162 century bits - CB1[7]:CB0[6] are stored in reg6 - 0x6 > (MONTH): CB1 CB0 > 0 0 (year 2000 - 2099) > 0 1 (year 2100 - 2199) > 1 0 (year 2200 - 2299) > 1 1 (year 2300 - 2399) > > The driver has been also adjusted to allow setting time up to year > 2399 if the M41T80_FEATURE_CB is set in its DTS/I2C data. > > There shall be no functional changes for devices not supporting this > feature. However, other devices - like m41t80 - have different > approaches to handle century information. Gentle ping on this patch - it has been almost 3 weeks without any reply ... Thanks in advance. > > Signed-off-by: Lukasz Majewski > --- > drivers/rtc/rtc-m41t80.c | 56 > +++++++++++++++++++++++++++++++--------- 1 file changed, 44 > insertions(+), 12 deletions(-) > > diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c > index 9fdc284c943b..5452ab693568 100644 > --- a/drivers/rtc/rtc-m41t80.c > +++ b/drivers/rtc/rtc-m41t80.c > @@ -68,9 +68,22 @@ > #define M41T80_FEATURE_SQ BIT(2) /* Squarewave feature > */ #define M41T80_FEATURE_WD BIT(3) /* Extra watchdog > resolution */ #define M41T80_FEATURE_SQ_ALT BIT(4) /* > RSx bits are in reg 4 */ +#define M41T80_FEATURE_CB > BIT(5) /* Century Bits[CB1:CB0] are in reg 6 */ + > +/* > + * Century bits - CB1[7]:CB0[6] in reg6 (MONTH): > + * CB1 CB0 > + * 0 0 (year 2000 - 2099) > + * 0 1 (year 2100 - 2199) > + * 1 0 (year 2200 - 2299) > + * 1 1 (year 2300 - 2399) > + */ > +#define M41T80_CB_SHIFT 6 /* CB[0] bit position */ > +#define M41T80_CB_MASK 0xc0 /* Century bits mask */ > > static const struct i2c_device_id m41t80_id[] = { > - { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT }, > + { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT | > + M41T80_FEATURE_CB}, > { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD }, > { "m41t80", M41T80_FEATURE_SQ }, > { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ}, > @@ -80,7 +93,8 @@ static const struct i2c_device_id m41t80_id[] = { > { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | > M41T80_FEATURE_SQ }, { "m41st85", M41T80_FEATURE_HT | > M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, { "m41st87", > M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, > - { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | > M41T80_FEATURE_SQ_ALT }, > + { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | > + M41T80_FEATURE_SQ_ALT | M41T80_FEATURE_CB}, > { } > }; > MODULE_DEVICE_TABLE(i2c, m41t80_id); > @@ -88,7 +102,8 @@ MODULE_DEVICE_TABLE(i2c, m41t80_id); > static const struct of_device_id m41t80_of_match[] = { > { > .compatible = "st,m41t62", > - .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_SQ_ALT) > + .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_SQ_ALT | > + M41T80_FEATURE_CB) > }, > { > .compatible = "st,m41t65", > @@ -128,16 +143,19 @@ static const struct of_device_id > m41t80_of_match[] = { }, > { > .compatible = "microcrystal,rv4162", > - .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) > + .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | > + M41T80_FEATURE_SQ_ALT | > M41T80_FEATURE_CB) }, > /* DT compatibility only, do not use compatibles below: */ > { > .compatible = "st,rv4162", > - .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) > + .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | > + M41T80_FEATURE_SQ_ALT | > M41T80_FEATURE_CB) }, > { > .compatible = "rv4162", > - .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) > + .data = (void *)(M41T80_FEATURE_SQ | > M41T80_FEATURE_WD | > + M41T80_FEATURE_SQ_ALT | > M41T80_FEATURE_CB) }, > { } > }; > @@ -197,6 +215,7 @@ static irqreturn_t m41t80_handle_irq(int irq, > void *dev_id) static int m41t80_rtc_read_time(struct device *dev, > struct rtc_time *tm) { > struct i2c_client *client = to_i2c_client(dev); > + struct m41t80_data *clientdata = i2c_get_clientdata(client); > unsigned char buf[8]; > int err, flags; > > @@ -222,9 +241,13 @@ static int m41t80_rtc_read_time(struct device > *dev, struct rtc_time *tm) tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] > & 0x3f); tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07; > tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1; > - > - /* assume 20YY not 19YY, and ignore the Century Bit */ > + /* assume 20YY not 19YY */ > tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100; > + > + if (clientdata->features & M41T80_FEATURE_CB) > + tm->tm_year += ((buf[M41T80_REG_MON] & > M41T80_CB_MASK) > + >> M41T80_CB_SHIFT) * 100; > + > return 0; > } > > @@ -232,10 +255,13 @@ static int m41t80_rtc_set_time(struct device > *dev, struct rtc_time *tm) { > struct i2c_client *client = to_i2c_client(dev); > struct m41t80_data *clientdata = i2c_get_clientdata(client); > + int err, flags, max_year = 199; > unsigned char buf[8]; > - int err, flags; > > - if (tm->tm_year < 100 || tm->tm_year > 199) > + if (clientdata->features & M41T80_FEATURE_CB) > + max_year = 499; > + > + if (tm->tm_year < 100 || tm->tm_year > max_year) > return -EINVAL; > > buf[M41T80_REG_SSEC] = 0; > @@ -243,8 +269,14 @@ static int m41t80_rtc_set_time(struct device > *dev, struct rtc_time *tm) buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min); > buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour); > buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday); > - buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1); > - buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100); > + if (clientdata->features & M41T80_FEATURE_CB) { > + buf[M41T80_REG_YEAR] = bin2bcd((tm->tm_year - 100) % > 100); > + buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1) | > + (((tm->tm_year - 100) / 100) << > M41T80_CB_SHIFT); > + } else { > + buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1); > + buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100); > + } > buf[M41T80_REG_WDAY] = tm->tm_wday; > > /* If the square wave output is controlled in the weekday > register */ Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de