Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
To: Jakub Kicinski <jakub.kicinski@netronome.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Lee Jones <lee.jones@linaro.org>,
	"David S. Miller" <davem@davemloft.net>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mips@vger.kernel.org, netdev@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [PATCH v7 0/5] Use MFD framework for SGI IOC3 drivers
Date: Wed,  9 Oct 2019 12:17:07 +0200
Message-ID: <20191009101713.12238-1-tbogendoerfer@suse.de> (raw)

SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte  bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.

Changes in v8:
 - Re-worked comments in drivers/mfd/ioc3.c
 - Added select CRC16 to ioc3-eth.c
 - Patches 1 and 2 are already taken to mips-next, but
   for completeness of the series they are still included.
   What's missing to get the remaining 3 patches via the MIPS
   tree is an ack from a network maintainer

Changes in v7:
 - added patch to enable ethernet phy for Origin 200 systems
 - depend on 64bit for ioc3 mfd driver

Changes in v6:
 - dropped patches accepted for v5.4-rc1
 - moved serio patch to ip30 patch series
 - adapted nvmem patch

Changes in v5:
 - requested by Jakub I've splited ioc3 ethernet driver changes into
   more steps to make the transition more visible; on the way there 
   I've "checkpatched" the driver and reduced code reorderings
 - dropped all uint16_t and uint32_t
 - added nvmem API extension to the documenation file
 - changed to use request_irq/free_irq in serio driver
 - removed wrong kfree() in serio error path

Changes in v4:
 - added w1 drivers to the series after merge in 5.3 failed because
   of no response from maintainer and other parts of this series
   won't work without that drivers
 - moved ip30 systemboard support to the ip30 series, which will
   deal with rtc oddity Lee found
 - converted to use devm_platform_ioremap_resource
 - use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver
 - fixed reverse christmas order in ioc3-eth.c
 - formating issue found by Lee
 - re-worked irq request/free in serio driver to avoid crashes during
   probe/remove

Changes in v3:
 - use 1-wire subsystem for handling proms
 - pci-xtalk driver uses prom information to create PCI subsystem
   ids for use in MFD driver
 - changed MFD driver to only use static declared mfd_cells
 - added IP30 system board setup to MFD driver
 - mac address is now read from ioc3-eth driver with nvmem framework

Changes in v2:
 - fixed issue in ioc3kbd.c reported by Dmitry Torokhov
 - merged IP27 RTC removal and 8250 serial driver addition into
   main MFD patch to keep patches bisectable

Thomas Bogendoerfer (5):
  nvmem: core: add nvmem_device_find
  MIPS: PCI: use information from 1-wire PROM for IOC3 detection
  mfd: ioc3: Add driver for SGI IOC3 chip
  MIPS: SGI-IP27: fix readb/writeb addressing
  MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module

 Documentation/driver-api/nvmem.rst            |   2 +
 arch/mips/include/asm/mach-ip27/mangle-port.h |   4 +-
 arch/mips/include/asm/pci/bridge.h            |   1 +
 arch/mips/include/asm/sn/ioc3.h               |  47 +-
 arch/mips/pci/pci-ip27.c                      |  22 +
 arch/mips/pci/pci-xtalk-bridge.c              | 135 +++++-
 arch/mips/sgi-ip27/ip27-timer.c               |  20 -
 arch/mips/sgi-ip27/ip27-xtalk.c               |  38 +-
 drivers/mfd/Kconfig                           |  13 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/ioc3.c                            | 588 ++++++++++++++++++++++++++
 drivers/net/ethernet/sgi/Kconfig              |   5 +-
 drivers/net/ethernet/sgi/ioc3-eth.c           | 561 +++++-------------------
 drivers/nvmem/core.c                          |  61 ++-
 drivers/rtc/rtc-m48t35.c                      |  11 +
 drivers/tty/serial/8250/8250_ioc3.c           |  98 +++++
 drivers/tty/serial/8250/Kconfig               |  11 +
 drivers/tty/serial/8250/Makefile              |   1 +
 include/linux/nvmem-consumer.h                |   9 +
 19 files changed, 1080 insertions(+), 548 deletions(-)
 create mode 100644 drivers/mfd/ioc3.c
 create mode 100644 drivers/tty/serial/8250/8250_ioc3.c

-- 
2.16.4


             reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 10:17 Thomas Bogendoerfer [this message]
2019-10-09 10:17 ` [PATCH v8 1/5] nvmem: core: add nvmem_device_find Thomas Bogendoerfer
2019-10-09 12:33   ` Philippe Mathieu-Daudé
2019-10-09 10:17 ` [PATCH v8 2/5] MIPS: PCI: use information from 1-wire PROM for IOC3 detection Thomas Bogendoerfer
2019-10-09 12:25   ` Philippe Mathieu-Daudé
2019-10-09 10:17 ` [PATCH v8 3/5] mfd: ioc3: Add driver for SGI IOC3 chip Thomas Bogendoerfer
2019-10-10  3:17   ` Jakub Kicinski
2019-10-10 13:29     ` Thomas Bogendoerfer
2019-10-09 10:17 ` [PATCH v8 4/5] MIPS: SGI-IP27: fix readb/writeb addressing Thomas Bogendoerfer
2019-10-09 10:17 ` [PATCH v8 5/5] MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module Thomas Bogendoerfer
  -- strict thread matches above, loose matches on Subject: below --
2019-10-03  9:52 [PATCH v7 0/5] Use MFD framework for SGI IOC3 drivers Thomas Bogendoerfer

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191009101713.12238-1-tbogendoerfer@suse.de \
    --to=tbogendoerfer@suse.de \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=jakub.kicinski@netronome.com \
    --cc=jhogan@kernel.org \
    --cc=jslaby@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git