Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] rtc: disable uie before setting time and enable after
@ 2019-10-20 23:13 Alexandre Belloni
  0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Belloni @ 2019-10-20 23:13 UTC (permalink / raw)
  To: linux-rtc; +Cc: linux-kernel, Alexandre Belloni, syzbot+08116743f8ad6f9a6de7

When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.

If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).

This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.

Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com
Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/interface.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index eea700723976..f8b7c004d6ec 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -125,7 +125,7 @@ EXPORT_SYMBOL_GPL(rtc_read_time);
 
 int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 {
-	int err;
+	int err, uie;
 
 	err = rtc_valid_tm(tm);
 	if (err != 0)
@@ -137,6 +137,17 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	rtc_subtract_offset(rtc, tm);
 
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	uie = rtc->uie_rtctimer.enabled || rtc->uie_irq_active;
+#else
+	uie = rtc->uie_rtctimer.enabled;
+#endif
+	if (uie) {
+		err = rtc_update_irq_enable(rtc, 0);
+		if (err)
+			return err;
+	}
+
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
 		return err;
@@ -153,6 +164,12 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 	/* A timer might have just expired */
 	schedule_work(&rtc->irqwork);
 
+	if (uie) {
+		err = rtc_update_irq_enable(rtc, 1);
+		if (err)
+			return err;
+	}
+
 	trace_rtc_set_time(rtc_tm_to_time64(tm), err);
 	return err;
 }
-- 
2.21.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH] rtc: disable uie before setting time and enable after
@ 2019-10-21 15:56 Alexandre Belloni
  0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Belloni @ 2019-10-21 15:56 UTC (permalink / raw)
  To: linux-rtc; +Cc: linux-kernel, Alexandre Belloni, syzbot+08116743f8ad6f9a6de7

When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.

If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).

This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.

Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com
Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/interface.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index eea700723976..f8b7c004d6ec 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -125,7 +125,7 @@ EXPORT_SYMBOL_GPL(rtc_read_time);
 
 int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 {
-	int err;
+	int err, uie;
 
 	err = rtc_valid_tm(tm);
 	if (err != 0)
@@ -137,6 +137,17 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	rtc_subtract_offset(rtc, tm);
 
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	uie = rtc->uie_rtctimer.enabled || rtc->uie_irq_active;
+#else
+	uie = rtc->uie_rtctimer.enabled;
+#endif
+	if (uie) {
+		err = rtc_update_irq_enable(rtc, 0);
+		if (err)
+			return err;
+	}
+
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
 		return err;
@@ -153,6 +164,12 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 	/* A timer might have just expired */
 	schedule_work(&rtc->irqwork);
 
+	if (uie) {
+		err = rtc_update_irq_enable(rtc, 1);
+		if (err)
+			return err;
+	}
+
 	trace_rtc_set_time(rtc_tm_to_time64(tm), err);
 	return err;
 }
-- 
2.21.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-20 23:13 [PATCH] rtc: disable uie before setting time and enable after Alexandre Belloni
2019-10-21 15:56 Alexandre Belloni

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git