From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Eddie Huang <eddie.huang@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Tianping Fang <tianping.fang@mediatek.com>,
Thomas Gleixner <tglx@linutronix.de>,
Josef Friedl <josef.friedl@speed.at>,
Kate Stewart <kstewart@linuxfoundation.org>,
Ran Bi <ran.bi@mediatek.com>,
Frank Wunderlich <frank-w@public-files.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-rtc@vger.kernel.org, srv_heupstream@mediatek.com
Subject: Re: [PATCH v7 6/6] rtc: Add support for the MediaTek MT6358 RTC
Date: Wed, 11 Dec 2019 13:27:57 +0100 [thread overview]
Message-ID: <20191211122757.GY1463890@piout.net> (raw)
In-Reply-To: <1576057435-3561-7-git-send-email-hsin-hsiung.wang@mediatek.com>
Hi,
Nitpick, the subject should have been:
rtc: mt6397: Add support for the MediaTek MT6358 RTC
On 11/12/2019 17:43:55+0800, Hsin-Hsiung Wang wrote:
> From: Ran Bi <ran.bi@mediatek.com>
>
> This add support for the MediaTek MT6358 RTC. Driver using
> compatible data to store different RTC_WRTGR address offset.
>
> Signed-off-by: Ran Bi <ran.bi@mediatek.com>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/rtc/rtc-mt6397.c | 24 ++++++++++++++++--------
> include/linux/mfd/mt6397/rtc.h | 16 +++++++++++++++-
> 2 files changed, 31 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 9135e21..6ca54f9 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -15,12 +15,24 @@
> #include <linux/mfd/mt6397/rtc.h>
> #include <linux/mod_devicetable.h>
>
> +static const struct of_device_id mt6397_rtc_of_match[] = {
> + { .compatible = "mediatek,mt6323-rtc",
> + .data = (void *)&mt6397_rtc_data, },
> + { .compatible = "mediatek,mt6358-rtc",
> + .data = (void *)&mt6358_rtc_data, },
> + { .compatible = "mediatek,mt6397-rtc",
> + .data = (void *)&mt6397_rtc_data, },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mt6397_rtc_of_match);
> +
> static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> {
> int ret;
> u32 data;
>
> - ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
> + ret = regmap_write(rtc->regmap,
> + rtc->addr_base + rtc->data->wrtgr, 1);
> if (ret < 0)
> return ret;
>
> @@ -269,6 +281,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> rtc->addr_base = res->start;
>
> + rtc->data = (struct mtk_rtc_data *)
> + of_device_get_match_data(&pdev->dev);
> +
> rtc->irq = platform_get_irq(pdev, 0);
> if (rtc->irq < 0)
> return rtc->irq;
> @@ -333,13 +348,6 @@ static int mt6397_rtc_resume(struct device *dev)
> static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
> mt6397_rtc_resume);
>
> -static const struct of_device_id mt6397_rtc_of_match[] = {
> - { .compatible = "mediatek,mt6323-rtc", },
> - { .compatible = "mediatek,mt6397-rtc", },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, mt6397_rtc_of_match);
> -
> static struct platform_driver mtk_rtc_driver = {
> .driver = {
> .name = "mt6397-rtc",
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> index 7dfb63b..8810e6f 100644
> --- a/include/linux/mfd/mt6397/rtc.h
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -18,7 +18,8 @@
> #define RTC_BBPU_CBUSY BIT(6)
> #define RTC_BBPU_KEY (0x43 << 8)
>
> -#define RTC_WRTGR 0x003c
> +#define RTC_WRTGR_MT6358 0x3a
> +#define RTC_WRTGR_MT6397 0x3c
>
> #define RTC_IRQ_STA 0x0002
> #define RTC_IRQ_STA_AL BIT(0)
> @@ -65,6 +66,10 @@
> #define MTK_RTC_POLL_DELAY_US 10
> #define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
>
> +struct mtk_rtc_data {
> + u32 wrtgr;
> +};
> +
> struct mt6397_rtc {
> struct device *dev;
> struct rtc_device *rtc_dev;
> @@ -74,6 +79,15 @@ struct mt6397_rtc {
> struct regmap *regmap;
> int irq;
> u32 addr_base;
> + const struct mtk_rtc_data *data;
> +};
> +
> +static const struct mtk_rtc_data mt6358_rtc_data = {
> + .wrtgr = RTC_WRTGR_MT6358,
> +};
> +
> +static const struct mtk_rtc_data mt6397_rtc_data = {
> + .wrtgr = RTC_WRTGR_MT6397,
> };
>
> #endif /* _LINUX_MFD_MT6397_RTC_H_ */
> --
> 2.6.4
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-12-11 12:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 9:43 [PATCH v7 0/6] Add Support for MediaTek PMIC MT6358 Hsin-Hsiung Wang
2019-12-11 9:43 ` [PATCH v7 1/6] mfd: mt6397: modify suspend/resume behavior Hsin-Hsiung Wang
2019-12-16 15:20 ` Lee Jones
2019-12-11 9:43 ` [PATCH v7 2/6] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-12-11 9:43 ` [PATCH v7 3/6] mfd: Add support " Hsin-Hsiung Wang
2019-12-16 15:17 ` Lee Jones
2020-01-22 3:48 ` Hsin-hsiung Wang
2020-02-03 7:46 ` Lee Jones
2019-12-11 9:43 ` [PATCH v7 4/6] arm64: dts: mt6358: add PMIC MT6358 related nodes Hsin-Hsiung Wang
2019-12-11 9:43 ` [PATCH v7 5/6] rtc: mt6397: fix alarm register overwrite Hsin-Hsiung Wang
2019-12-11 12:25 ` Alexandre Belloni
2019-12-11 9:43 ` [PATCH v7 6/6] rtc: Add support for the MediaTek MT6358 RTC Hsin-Hsiung Wang
2019-12-11 12:27 ` Alexandre Belloni [this message]
2019-12-16 15:21 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211122757.GY1463890@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=frank-w@public-files.de \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=josef.friedl@speed.at \
--cc=kstewart@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=ran.bi@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tglx@linutronix.de \
--cc=tianping.fang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).