From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 5.6
Date: Mon, 3 Feb 2020 23:32:40 +0100 [thread overview]
Message-ID: <20200203223240.GA63964@piout.net> (raw)
Hello Linus,
Here is the pull-request for the RTC subsystem for 5.6.
The VL_READ and VL_CLR ioctls have been reworked to be more useful. This
will not break userspace as there are very few users and they are using
the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-5.6
for you to fetch changes up to f45719240700398b63a165f6b7f3fbab04f0b052:
dt-bindings: rtc: at91rm9200: document clocks property (2020-01-28 22:48:34 +0100)
----------------------------------------------------------------
RTC for 5.6
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior is
unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support
----------------------------------------------------------------
Alexandre Belloni (44):
mailmap: Update email address for Alexandre Belloni
rtc: define RTC_VL_READ values
rtc: Document RTC_VL_READ and RTC_VL_CLR ioctls
rtc: abx80x: return meaningful value for RTC_VL_READ
rtc: pcf2127: return meaningful value for RTC_VL_READ
rtc: pcf8523: return meaningful value for RTC_VL_READ
rtc: pcf8563: remove RTC_VL_CLR handling
rtc: pcf8563: remove conditional compilation
rtc: pcf8563: stop caching voltage_low
rtc: pcf8563: return meaningful value for RTC_VL_READ
rtc: pcf85063: remove RTC_VL_CLR handling
rtc: pcf85063: return meaningful value for RTC_VL_READ
rtc: rv3028: remove RTC_VL_CLR handling
rtc: rv3028: return meaningful value for RTC_VL_READ
rtc: rv8803: avoid clearing RV8803_FLAG_V2F in RTC_VL_CLR
rtc: rv8803: return meaningful value for RTC_VL_READ
rtc: rx8010: remove RTC_VL_CLR handling
rtc: rx8010: return meaningful value for RTC_VL_READ
rtc: rv3029: use proper name for the driver
rtc: rv3029: let regmap validate the register ranges
rtc: rv3029: remove open coded regmap_update_bits
rtc: rv3029: remove race condition when update STATUS
rtc: rv3029: avoid reading the status register uselessly
rtc: rv3029: get rid of rv3029_get_sr
rtc: rv3029: simplify rv3029_alarm_irq_enable
rtc: rv3029: simplify rv3029_set_alarm
rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs
rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support
rtc: rv3029: correctly handle PON and VLOW2
rtc: rv3029: convert to devm_rtc_allocate_device
rtc: rv3029: let the core handle rtc range
rtc: rv3029: add nvram support
rtc: rv3029: drop deprecated compatbiles
rtc: rv3029: annotate init and exit functions
rtc: rv3029: remove useless error messages
rtc: at91rm9200: remove procfs information
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: Kconfig: properly indent sd3078 entry
rtc: Kconfig: select REGMAP_I2C when necessary
dt-bindings: rtc: at91rm9200: document clocks property
Andy Shevchenko (3):
rtc: cmos: Stop using shared IRQ
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
Chuhong Yuan (2):
rtc: stm32: add missed clk_disable_unprepare in error path of resume
rtc: asm9260: add the missed check for devm_clk_get
Claudiu Beznea (1):
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
Dmitry Osipenko (1):
rtc: tps6586x: Use IRQ_NOAUTOEN flag
Geert Uytterhoeven (1):
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
Jean-Francois Dagenais (1):
rtc: zynqmp: re-use rtc_time64_to_tm operation
Linus Walleij (1):
rtc: ds1343: Do not hardcode SPI mode flags
Nobuhiro Iwamatsu (5):
rtc: rx8010: Fix return code for rx8010_probe
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: moxart: Convert to SPDX identifier
rtc: pcf8563: Use BIT
Paul Kocialkowski (2):
rtc: hym8563: Return -EINVAL if the time is known to be invalid
rtc: hym8563: Read the valid flag directly instead of caching it
Wei Yongjun (1):
rtc: mt6397: drop free_irq of devm_ allocated irq
zhengbin (1):
rtc: omap: Remove unneeded semicolon
.mailmap | 1 +
Documentation/ABI/testing/rtc-cdev | 8 +
.../bindings/rtc/atmel,at91rm9200-rtc.txt | 17 -
.../bindings/rtc/atmel,at91rm9200-rtc.yaml | 49 +++
drivers/rtc/Kconfig | 24 +-
drivers/rtc/rtc-abx80x.c | 7 +-
drivers/rtc/rtc-asm9260.c | 3 +
drivers/rtc/rtc-at91rm9200.c | 119 +++---
drivers/rtc/rtc-at91rm9200.h | 71 ----
drivers/rtc/rtc-cmos.c | 12 +-
drivers/rtc/rtc-ds1343.c | 10 +-
drivers/rtc/rtc-hym8563.c | 19 +-
drivers/rtc/rtc-moxart.c | 5 +-
drivers/rtc/rtc-mt6397.c | 10 +-
drivers/rtc/rtc-omap.c | 2 +-
drivers/rtc/rtc-pcf2127.c | 6 +-
drivers/rtc/rtc-pcf85063.c | 16 +-
drivers/rtc/rtc-pcf8523.c | 6 +-
drivers/rtc/rtc-pcf8563.c | 40 +-
drivers/rtc/rtc-rv3028.c | 17 +-
drivers/rtc/rtc-rv3029c2.c | 442 +++++++++------------
drivers/rtc/rtc-rv8803.c | 16 +-
drivers/rtc/rtc-rx8010.c | 25 +-
drivers/rtc/rtc-rx8025.c | 27 +-
drivers/rtc/rtc-stm32.c | 5 +-
drivers/rtc/rtc-tps6586x.c | 4 +-
drivers/rtc/rtc-zynqmp.c | 4 +-
include/linux/rtc.h | 1 +
include/uapi/linux/rtc.h | 7 +-
29 files changed, 415 insertions(+), 558 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
delete mode 100644 drivers/rtc/rtc-at91rm9200.h
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next reply other threads:[~2020-02-03 22:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-03 22:32 Alexandre Belloni [this message]
2020-02-04 8:05 ` [GIT PULL] RTC for 5.6 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200203223240.GA63964@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).