Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
From: <Sergey.Semin@baikalelectronics.ru>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Paul Burton <paulburton@kernel.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	<devicetree@vger.kernel.org>, <linux-rtc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
Date: Tue, 24 Mar 2020 20:43:21 +0300
Message-ID: <20200324174325.14213-3-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200324174325.14213-1-Sergey.Semin@baikalelectronics.ru>

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

Modern device tree bindings are supposed to be created as YAML-files
in accordance with DT schema. This commit replaces MIPS GIC legacy bare
text binding with YAML file. As before the binding file states that the
corresponding dts node is supposed to be compatible with MIPS Global
Interrupt Controller indicated by the "mti,gic" compatible string and
to provide a mandatory interrupt-controller and '#interrupt-cells'
properties. There might be optional registers memory range,
"mti,reserved-cpu-vectors" and "mti,reserved-ipi-vectors" properties
specified.

MIPS GIC also includes a free-running global timer, per-CPU count/compare
timers, and a watchdog. Since currently the GIC Timer is only supported the
DT schema expects an IRQ and clock-phandler charged timer sub-node with
"mti,mips-gic-timer" compatible string.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-rtc@vger.kernel.org

---

I don't really know who is the corresponding driver maintainer, so I
added to the maintainers schema Paul since he used to be looking for the
MIPS arch and Thomas looking after it now. Any idea what email should be
specified there instead?

Similarly to the previous patch the "oneOf: - required: ..." pattern isn't
working here. Supposedly due to the script' dtschema/lib.py
interrupts/interrupts-extended fixup.
---
 .../interrupt-controller/mips-gic.txt         |  67 --------
 .../interrupt-controller/mti,gic.yaml         | 152 ++++++++++++++++++
 2 files changed, 152 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
deleted file mode 100644
index 173595305e26..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-MIPS Global Interrupt Controller (GIC)
-
-The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
-It also supports local (per-processor) interrupts and software-generated
-interrupts which can be used as IPIs.  The GIC also includes a free-running
-global timer, per-CPU count/compare timers, and a watchdog.
-
-Required properties:
-- compatible : Should be "mti,gic".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt specifier.  Should be 3.
-  - The first cell is the type of interrupt, local or shared.
-    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
-  - The second cell is the GIC interrupt number.
-  - The third cell encodes the interrupt flags.
-    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
-    flags.
-
-Optional properties:
-- reg : Base address and length of the GIC registers.  If not present,
-  the base address reported by the hardware GCR_GIC_BASE will be used.
-- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
-  to which the GIC may not route interrupts.  Valid values are 2 - 7.
-  This property is ignored if the CPU is started in EIC mode.
-- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
-  reserved for IPIs.
-  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
-  of the reserved range.
-  If not specified, the driver will allocate the last 2 * number of VPEs in the
-  system.
-
-Required properties for timer sub-node:
-- compatible : Should be "mti,gic-timer".
-- interrupts : Interrupt for the GIC local timer.
-
-Optional properties for timer sub-node:
-- clocks : GIC timer operating clock.
-- clock-frequency : Clock frequency at which the GIC timers operate.
-
-Note that one of clocks or clock-frequency must be specified.
-
-Example:
-
-	gic: interrupt-controller@1bdc0000 {
-		compatible = "mti,gic";
-		reg = <0x1bdc0000 0x20000>;
-
-		interrupt-controller;
-		#interrupt-cells = <3>;
-
-		mti,reserved-cpu-vectors = <7>;
-		mti,reserved-ipi-vectors = <40 8>;
-
-		timer {
-			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	uart@18101400 {
-		...
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
new file mode 100644
index 000000000000..1e47c0cdc231
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+  It also supports local (per-processor) interrupts and software-generated
+  interrupts which can be used as IPIs. The GIC also includes a free-running
+  global timer, per-CPU count/compare timers, and a watchdog.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: mti,gic
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the type of interrupt: local or shared defined in the
+      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+      the IRQ trigger modes, which are defined in the file
+      'dt-bindings/interrupt-controller/irq.h'.
+
+  reg:
+    description: |
+      Base address and length of the GIC registers space. If not present,
+      the base address reported by the hardware GCR_GIC_BASE will be used.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  mti,reserved-cpu-vectors:
+    description: |
+      Specifies the list of CPU interrupt vectors to which the GIC may not
+      route interrupts. This property is ignored if the CPU is started in EIC
+      mode.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - minItems: 1
+        maxItems: 6
+        uniqueItems: true
+        items:
+          minimum: 2
+          maximum: 7
+
+  mti,reserved-ipi-vectors:
+    description: |
+      Specifies the range of GIC interrupts that are reserved for IPIs.
+      It accepts two values: the 1st is the starting interrupt and the 2nd is
+      the size of the reserved range. If not specified, the driver will
+      allocate the last (2 * number of VPEs in the system).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - items:
+          - minimum: 0
+            maximum: 254
+          - minimum: 2
+            maximum: 254
+
+patternProperties:
+  "^timer(@[0-9a-f]+)?$":
+    type: object
+    description: |
+      MIPS GIC includes a free-running global timer, per-CPU count/compare
+      timers, and a watchdog. Currently only the GIC Timer is supported.
+    properties:
+      compatible:
+        const: mti,gic-timer
+
+      interrupts:
+        description: |
+          Interrupt for the GIC local timer, so normally it's suppose to be of
+          <GIC_LOCAL X IRQ_TYPE_NONE> format.
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-frequency: true
+
+    required:
+      - compatible
+      - interrupts
+
+    oneOf:
+      - required:
+          - clocks
+      - required:
+          - clock-frequency
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      mti,reserved-cpu-vectors = <7>;
+      mti,reserved-ipi-vectors = <40 8>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clock-frequency = <50000000>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clocks = <&cpu_pll>;
+      };
+    };
+  - |
+    interrupt-controller {
+      compatible = "mti,gic";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+...
-- 
2.25.1


  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200306125622.839ED80307C4@mail.baikalelectronics.ru>
2020-03-24 17:43 ` [PATCH v2 0/6] clocksource: Fix MIPS GIC and DW APB Timer for Baikal-T1 SoC support Sergey.Semin
2020-03-24 17:43   ` [PATCH v2 1/6] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema Sergey.Semin
2020-03-24 18:07     ` Alexandre Belloni
2020-03-24 18:20       ` Serge Semin
2020-03-31 20:14     ` Rob Herring
2020-03-24 17:43   ` Sergey.Semin [this message]
2020-03-31 21:02     ` [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic " Rob Herring
2020-04-01 10:19       ` Sergey Semin
2020-04-01 14:13         ` Rob Herring
2020-04-01 22:07           ` Sergey Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200324174325.14213-3-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=arnd@arndb.de \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git