[PATCH AUTOSEL 5.7 064/274] clocksource: dw_apb_timer: Make CPU-affiliation being optional

[PATCH AUTOSEL 5.7 064/274] clocksource: dw_apb_timer: Make CPU-affiliation being optional

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit cee43dbf2ee3f430434e2b66994eff8a1aeda889 ]

Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.

So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index b207a77b0831..f5f24a95ee82 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -222,7 +222,8 @@ static int apbt_next_event(unsigned long delta,
 /**
  * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
  *
- * @cpu:	The CPU the events will be targeted at.
+ * @cpu:	The CPU the events will be targeted at or -1 if CPU affiliation
+ *		isn't required.
  * @name:	The name used for the timer and the IRQ for it.
  * @rating:	The rating to give the timer.
  * @base:	I/O base for the timer registers.
@@ -257,7 +258,7 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 	dw_ced->ced.max_delta_ticks = 0x7fffffff;
 	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 	dw_ced->ced.min_delta_ticks = 5000;
-	dw_ced->ced.cpumask = cpumask_of(cpu);
+	dw_ced->ced.cpumask = cpu < 0 ? cpu_possible_mask : cpumask_of(cpu);
 	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
 				CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	dw_ced->ced.set_state_shutdown = apbt_shutdown;
-- 
2.25.1

[PATCH AUTOSEL 5.7 065/274] clocksource: dw_apb_timer_of: Fix missing clockevent timers

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.

Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer_of.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 8c28b127759f..6921b91b61ef 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -147,10 +147,6 @@ static int num_called;
 static int __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
-	case 0:
-		pr_debug("%s: found clockevent timer\n", __func__);
-		add_clockevent(timer);
-		break;
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
@@ -161,6 +157,8 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 #endif
 		break;
 	default:
+		pr_debug("%s: found clockevent timer\n", __func__);
+		add_clockevent(timer);
 		break;
 	}
 
-- 
2.25.1