Hi, chained to this message is what remains of the patch set that converts binding documents for hardware used with Marvell MMP SoCs to JSON. Compared to v2 there are fixes to the first two patches. Detailed changelogs are in the individual patches. Thanks Lubo
This converts the mrvl-gpio binding to DT schema format using json-schema. Various fixes were done during the conversion, such as adding more properties that are in fact mandatory or extending the examples to include child nodes with extra GPIO blocks. The compatible strings are a mess. It is not clear why so many of them are needed; the driver doesn't really seem to differentiate between the models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio are not used at all, so it's not known how many interrupts they utilize. On the other hand, mrvl,pxa-gpio has been seen in the tree, but it doesn't end up in any actual DTB file. In any case -- the schema merely copies whatever was in the original binding document, so it's hopefully no more wrong that the original. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v2: - Don't make ranges property mandatory Changes since v1: - Drop marvell,pxa1928-gpio - Drop ranges from example with no gcb child nodes - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 ----- .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++ 2 files changed, 173 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt deleted file mode 100644 index 30fd2201b3d4c..0000000000000 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Marvell PXA GPIO controller - -Required properties: -- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", - "intel,pxa27x-gpio", "intel,pxa3xx-gpio", - "marvell,pxa93x-gpio", "marvell,mmp-gpio", - "marvell,mmp2-gpio" or marvell,pxa1928-gpio. -- reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all gpio pins. - There're three gpio interrupts in arch-pxa, and they're gpio0, - gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, - gpio_mux. -- interrupt-names : Should be the names of irq resources. Each interrupt - uses its own interrupt name, so there should be as many interrupt names - as referenced interrupts. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. See gpio.txt for possible - values. - -Example for a MMP platform: - - gpio: gpio@d4019000 { - compatible = "marvell,mmp-gpio"; - reg = <0xd4019000 0x1000>; - interrupts = <49>; - interrupt-names = "gpio_mux"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <1>; - }; - -Example for a PXA3xx platform: - - gpio: gpio@40e00000 { - compatible = "intel,pxa3xx-gpio"; - reg = <0x40e00000 0x10000>; - interrupt-names = "gpio0", "gpio1", "gpio_mux"; - interrupts = <8 9 10>; - gpio-controller; - #gpio-cells = <0x2>; - interrupt-controller; - #interrupt-cells = <0x2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml new file mode 100644 index 0000000000000..4db3b8a3332c2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + - Rob Herring <robh+dt@kernel.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - intel,pxa25x-gpio + - intel,pxa26x-gpio + - intel,pxa27x-gpio + - intel,pxa3xx-gpio + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + interrupt-names: + items: + - const: gpio0 + - const: gpio1 + - const: gpio_mux + - if: + properties: + compatible: + contains: + enum: + - marvell,mmp-gpio + - marvell,mmp2-gpio + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: gpio_mux + +properties: + $nodename: + pattern: '^gpio@[0-9a-f]+$' + + compatible: + enum: + - intel,pxa25x-gpio + - intel,pxa26x-gpio + - intel,pxa27x-gpio + - intel,pxa3xx-gpio + - marvell,mmp-gpio + - marvell,mmp2-gpio + - marvell,pxa93x-gpio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupts: true + + interrupt-names: true + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +patternProperties: + '^gpio@[0-9a-f]*$': + type: object + properties: + reg: + maxItems: 1 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + - reg + - gpio-controller + - '#gpio-cells' + - interrupts + - interrupt-names + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/pxa-clock.h> + gpio@40e00000 { + compatible = "intel,pxa3xx-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40e00000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <8>, <9>, <10>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; + clocks = <&clks CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + }; + - | + #include <dt-bindings/clock/marvell,pxa910.h> + gpio@d4019000 { + compatible = "marvell,mmp-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <49>; + interrupt-names = "gpio_mux"; + clocks = <&soc_clocks PXA910_CLK_GPIO>; + resets = <&soc_clocks PXA910_CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + }; + +... -- 2.26.2
A conversion of the i2c-pxa binding to DT schema format using json-schema. This also cleans ups some errors in the binding: The compatible string description suggested that "mmp" in "mrvl,mmp-twsi" is to be substituted with a processor model, which wouldn't be a right thing to do and indeed nobody seems to have been doing that. There also was "Recommended properties" section that included optional as well as mandatory properties. Missing mandatory properties were added to the example. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v2: - Add unevaluatedProperties: false Changes since v1: - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../devicetree/bindings/i2c/i2c-pxa.txt | 31 -------- .../devicetree/bindings/i2c/i2c-pxa.yaml | 74 +++++++++++++++++++ 2 files changed, 74 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-pxa.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-pxa.yaml diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt deleted file mode 100644 index c30783c0eca03..0000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Marvell MMP I2C controller - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a - compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. - For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required - as shown in the example below. - For the Armada 3700, the compatible should be "marvell,armada-3700-i2c". - -Recommended properties : - - - interrupts : the interrupt number - - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling - status register of i2c controller instead. - - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. - -Examples: - twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi"; - reg = <0xd4011000 0x1000>; - interrupts = <7>; - mrvl,i2c-fast-mode; - }; - - twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi"; - reg = <0xd4025000 0x1000>; - interrupts = <58>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml new file mode 100644 index 0000000000000..da6e8bdc40377 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP I2C controller bindings + +maintainers: + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + not: + required: + - mrvl,i2c-polling + then: + required: + - interrupts + +properties: + compatible: + enum: + - mrvl,mmp-twsi + - mrvl,pxa-i2c + - marvell,armada-3700-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + resets: + minItems: 1 + + mrvl,i2c-polling: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Disable interrupt of i2c controller. Polling status register of i2c + controller instead. + + mrvl,i2c-fast-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable fast mode of i2c controller. + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2.h> + i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + mrvl,i2c-fast-mode; + #address-cells = <1>; + #size-cells = <0>; + }; + +... -- 2.26.2
Convert the mrvl,intc binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v1: - Move minItems/maxItems to main reg property definition from the conditional one - Drop the condition for marvell,orion-intc - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../interrupt-controller/mrvl,intc.txt | 64 --------- .../interrupt-controller/mrvl,intc.yaml | 134 ++++++++++++++++++ 2 files changed, 134 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt deleted file mode 100644 index a0ed02725a9d7..0000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Marvell MMP Interrupt controller - -Required properties: -- compatible : Should be - "mrvl,mmp-intc" on Marvel MMP, - "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or - "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 -- reg : Address and length of the register set of the interrupt controller. - If the interrupt controller is intc, address and length means the range - of the whole interrupt controller. The "marvell,mmp3-intc" controller - also has a secondary range for the second CPU core. If the interrupt - controller is mux-intc, address and length means one register. Since - address of mux-intc is in the range of intc. mux-intc is secondary - interrupt controller. -- reg-names : Name of the register set of the interrupt controller. It's - only required in mux-intc interrupt controller. -- interrupts : Should be the port interrupt shared by mux interrupts. It's - only required in mux-intc interrupt controller. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt - controller. -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge - detection first. - -Example: - intc: interrupt-controller@d4282000 { - compatible = "mrvl,mmp2-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd4282000 0x1000>; - mrvl,intc-nr-irqs = <64>; - }; - - intcmux4@d4282150 { - compatible = "mrvl,mmp2-mux-intc"; - interrupts = <4>; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x150 0x4>, <0x168 0x4>; - reg-names = "mux status", "mux mask"; - mrvl,intc-nr-irqs = <2>; - }; - -* Marvell Orion Interrupt controller - -Required properties -- compatible : Should be "marvell,orion-intc". -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. Supported value is <1>. -- interrupt-controller : Declare this node to be an interrupt controller. -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. - One entry in the list represents 32 interrupts. - -Example: - - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xfed20204 0x04>, - <0xfed20214 0x04>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml new file mode 100644 index 0000000000000..372ccbfae7716 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP/Orion Interrupt controller bindings + +maintainers: + - Thomas Gleixner <tglx@linutronix.de> + - Jason Cooper <jason@lakedaemon.net> + - Marc Zyngier <maz@kernel.org> + - Rob Herring <robh+dt@kernel.org> + +allOf: + - if: + properties: + compatible: + not: + contains: + const: marvell,orion-intc + then: + required: + - mrvl,intc-nr-irqs + - if: + properties: + compatible: + contains: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + then: + properties: + reg: + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - marvell,mmp3-intc + - mrvl,mmp2-mux-intc + then: + properties: + reg: + minItems: 2 + - if: + properties: + compatible: + contains: + const: mrvl,mmp2-mux-intc + then: + properties: + interrupts: + maxItems: 1 + reg-names: + items: + - const: 'mux status' + - const: 'mux mask' + required: + - interrupts + else: + properties: + interrupts: false + +properties: + '#interrupt-cells': + const: 1 + + compatible: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + - marvell,mmp3-intc + - marvell,orion-intc + - mrvl,mmp2-mux-intc + + reg: + minItems: 1 + maxItems: 2 + + reg-names: true + + interrupts: true + + interrupt-controller: true + + mrvl,intc-nr-irqs: + description: | + Specifies the number of interrupts in the interrupt controller. + $ref: /schemas/types.yaml#/definitions/uint32 + + mrvl,clr-mfp-irq: + description: | + Specifies the interrupt that needs to clear MFP edge detection first. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - '#interrupt-cells' + - compatible + - reg + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + - | + interrupt-controller@fed20204 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; + +... -- 2.26.2
Convert the sa1100-rtc binding to DT schema format using json-schema. While add that, add clocks and resets that are actually used. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v1: - Remove interrupts/maxItems - Mention clocks and resets in the patch description - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../devicetree/bindings/rtc/sa1100-rtc.txt | 17 ------ .../devicetree/bindings/rtc/sa1100-rtc.yaml | 57 +++++++++++++++++++ 2 files changed, 57 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt deleted file mode 100644 index 968ac820254bb..0000000000000 --- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Marvell Real Time Clock controller - -Required properties: -- compatible: should be "mrvl,sa1100-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: Should be two. The first interrupt number is the rtc alarm - interrupt and the second interrupt number is the rtc hz interrupt. -- interrupt-names: Assign name of irq resource. - -Example: - rtc: rtc@d4010000 { - compatible = "mrvl,mmp-rtc"; - reg = <0xd4010000 0x1000>; - interrupts = <5>, <6>; - interrupt-names = "rtc 1Hz", "rtc alarm"; - }; diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml new file mode 100644 index 0000000000000..482e5af215b3d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Real Time Clock controller bindings + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Alessandro Zummo <a.zummo@towertech.it> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Rob Herring <robh+dt@kernel.org> + +properties: + compatible: + enum: + - mrvl,sa1100-rtc + - mrvl,mmp-rtc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: 'rtc 1Hz' + - const: 'rtc alarm' + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5>, <6>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + }; + +... -- 2.26.2
A straightforward conversion of the mrvl,mmp-timer binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v1: - Add default GPL-2.0-only license tag - Fill in maintainers from MAINTAINERS file .../bindings/timer/mrvl,mmp-timer.txt | 17 ------- .../bindings/timer/mrvl,mmp-timer.yaml | 46 +++++++++++++++++++ 2 files changed, 46 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt create mode 100644 Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt deleted file mode 100644 index b8f02c6635219..0000000000000 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Marvell MMP Timer controller - -Required properties: -- compatible : Should be "mrvl,mmp-timer". -- reg : Address and length of the register set of timer controller. -- interrupts : Should be the interrupt number. - -Optional properties: -- clocks : Should contain a single entry describing the clock input. - -Example: - timer0: timer@d4014000 { - compatible = "mrvl,mmp-timer"; - reg = <0xd4014000 0x100>; - interrupts = <13>; - clocks = <&coreclk 2>; - }; diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml new file mode 100644 index 0000000000000..1fbc260a0cbdf --- /dev/null +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/mrvl,mmp-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP Timer bindings + +maintainers: + - Daniel Lezcano <daniel.lezcano@linaro.org> + - Thomas Gleixner <tglx@linutronix.de> + - Rob Herring <robh+dt@kernel.org> + +properties: + $nodename: + pattern: '^timer@[a-f0-9]+$' + + compatible: + const: mrvl,mmp-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + clocks = <&coreclk 2>; + }; + +... -- 2.26.2
On Wed, Jun 17, 2020 at 12:33 AM Lubomir Rintel <lkundrak@v3.sk> wrote:
> This converts the mrvl-gpio binding to DT schema format using json-schema.
This looks about right to me:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
I expect Rob will apply it when he's happy with it, else poke me once
he ACKs it.
Yours,
Linus Walleij
On Wed, 17 Jun 2020 00:33:49 +0200, Lubomir Rintel wrote:
> This converts the mrvl-gpio binding to DT schema format using json-schema.
>
> Various fixes were done during the conversion, such as adding more
> properties that are in fact mandatory or extending the examples to
> include child nodes with extra GPIO blocks.
>
> The compatible strings are a mess. It is not clear why so many of them
> are needed; the driver doesn't really seem to differentiate between the
> models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio
> are not used at all, so it's not known how many interrupts they utilize.
> On the other hand, mrvl,pxa-gpio has been seen in the tree, but it
> doesn't end up in any actual DTB file.
>
> In any case -- the schema merely copies whatever was in the original
> binding document, so it's hopefully no more wrong that the original.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v2:
> - Don't make ranges property mandatory
>
> Changes since v1:
> - Drop marvell,pxa1928-gpio
> - Drop ranges from example with no gcb child nodes
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
> .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 -----
> .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++
> 2 files changed, 173 insertions(+), 48 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
>
Applied, thanks!
On Wed, 17 Jun 2020 00:33:50 +0200, Lubomir Rintel wrote:
> A conversion of the i2c-pxa binding to DT schema format using json-schema.
>
> This also cleans ups some errors in the binding: The compatible string
> description suggested that "mmp" in "mrvl,mmp-twsi" is to be substituted
> with a processor model, which wouldn't be a right thing to do and indeed
> nobody seems to have been doing that. There also was "Recommended
> properties" section that included optional as well as mandatory
> properties. Missing mandatory properties were added to the example.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v2:
> - Add unevaluatedProperties: false
>
> Changes since v1:
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
> .../devicetree/bindings/i2c/i2c-pxa.txt | 31 --------
> .../devicetree/bindings/i2c/i2c-pxa.yaml | 74 +++++++++++++++++++
> 2 files changed, 74 insertions(+), 31 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-pxa.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
>
Applied, thanks!
On Wed, 17 Jun 2020 00:33:51 +0200, Lubomir Rintel wrote:
> Convert the mrvl,intc binding to DT schema format using json-schema.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v1:
> - Move minItems/maxItems to main reg property definition from the
> conditional one
> - Drop the condition for marvell,orion-intc
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
> .../interrupt-controller/mrvl,intc.txt | 64 ---------
> .../interrupt-controller/mrvl,intc.yaml | 134 ++++++++++++++++++
> 2 files changed, 134 insertions(+), 64 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
>
Applied, thanks!
On Wed, 17 Jun 2020 00:33:52 +0200, Lubomir Rintel wrote:
> Convert the sa1100-rtc binding to DT schema format using json-schema.
> While add that, add clocks and resets that are actually used.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v1:
> - Remove interrupts/maxItems
> - Mention clocks and resets in the patch description
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
> .../devicetree/bindings/rtc/sa1100-rtc.txt | 17 ------
> .../devicetree/bindings/rtc/sa1100-rtc.yaml | 57 +++++++++++++++++++
> 2 files changed, 57 insertions(+), 17 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> create mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
>
Applied, thanks!
On Wed, 17 Jun 2020 00:33:53 +0200, Lubomir Rintel wrote:
> A straightforward conversion of the mrvl,mmp-timer binding to DT schema
> format using json-schema.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v1:
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
> .../bindings/timer/mrvl,mmp-timer.txt | 17 -------
> .../bindings/timer/mrvl,mmp-timer.yaml | 46 +++++++++++++++++++
> 2 files changed, 46 insertions(+), 17 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
> create mode 100644 Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
>
Applied, thanks!