From: Mathew McBride <matt@traverse.com.au>
To: linux-rtc@vger.kernel.org,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Cc: Mathew McBride <matt@traverse.com.au>
Subject: [PATCH v2 1/2] rtc: rx8025: implement RX-8035 support
Date: Fri, 9 Jul 2021 04:45:17 +0000 [thread overview]
Message-ID: <20210709044518.28769-2-matt@traverse.com.au> (raw)
In-Reply-To: <20210709044518.28769-1-matt@traverse.com.au>
The RX-8035 is a newer RTC from EPSON that is very
similar to the RX-8025.
The key difference is in the oscillation stop (XSTP)
bit which is inverted on the RX-8035.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
---
drivers/rtc/rtc-rx8025.c | 58 ++++++++++++++++++++++++++++++++++++----
1 file changed, 53 insertions(+), 5 deletions(-)
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index c914091819ba..7a0258fe4b8e 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -60,14 +60,23 @@
#define RX8025_ADJ_DATA_MAX 62
#define RX8025_ADJ_DATA_MIN -62
+enum rx_model {
+ model_rx_unknown,
+ model_rx_8025,
+ model_rx_8035,
+ model_last
+};
+
static const struct i2c_device_id rx8025_id[] = {
- { "rx8025", 0 },
+ { "rx8025", model_rx_8025 },
+ { "rx8035", model_rx_8035 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rx8025_id);
struct rx8025_data {
struct rtc_device *rtc;
+ enum rx_model model;
u8 ctrl1;
};
@@ -100,10 +109,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
length, values);
}
+static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
+{
+ int xstp = ctrl2 & RX8025_BIT_CTRL2_XST;
+ /* XSTP bit has different polarity on RX-8025 vs RX-8035.
+ * RX-8025: 0 == oscillator stopped
+ * RX-8035: 1 == oscillator stopped
+ */
+
+ if (model == model_rx_8025)
+ xstp = !xstp;
+
+ return xstp;
+}
+
static int rx8025_check_validity(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct rx8025_data *drvdata = dev_get_drvdata(dev);
int ctrl2;
+ int xstp;
ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
if (ctrl2 < 0)
@@ -117,7 +142,8 @@ static int rx8025_check_validity(struct device *dev)
return -EINVAL;
}
- if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
+ xstp = rx8025_is_osc_stopped(drvdata->model, ctrl2);
+ if (xstp) {
dev_warn(dev, "crystal stopped, date is invalid\n");
return -EINVAL;
}
@@ -127,6 +153,7 @@ static int rx8025_check_validity(struct device *dev)
static int rx8025_reset_validity(struct i2c_client *client)
{
+ struct rx8025_data *drvdata = i2c_get_clientdata(client);
int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
if (ctrl2 < 0)
@@ -134,22 +161,28 @@ static int rx8025_reset_validity(struct i2c_client *client)
ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
+ if (drvdata->model == model_rx_8025)
+ ctrl2 |= RX8025_BIT_CTRL2_XST;
+ else
+ ctrl2 &= ~(RX8025_BIT_CTRL2_XST);
+
return rx8025_write_reg(client, RX8025_REG_CTRL2,
- ctrl2 | RX8025_BIT_CTRL2_XST);
+ ctrl2);
}
static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
- int status;
+ int status, xstp;
rtc_lock(rx8025->rtc);
status = rx8025_read_reg(client, RX8025_REG_CTRL2);
if (status < 0)
goto out;
- if (!(status & RX8025_BIT_CTRL2_XST))
+ xstp = rx8025_is_osc_stopped(rx8025->model, status);
+ if (xstp)
dev_warn(&client->dev, "Oscillation stop was detected,"
"you may have to readjust the clock\n");
@@ -519,6 +552,21 @@ static int rx8025_probe(struct i2c_client *client,
i2c_set_clientdata(client, rx8025);
+ if (id) {
+ rx8025->model = id->driver_data;
+ switch (rx8025->model) {
+ case model_rx_8025:
+ dev_info(&client->dev, "Model RX-8025");
+ break;
+ case model_rx_8035:
+ dev_info(&client->dev, "Model RX-8035");
+ break;
+ default:
+ dev_warn(&client->dev, "Unknown model: %d\n", rx8025->model);
+ break;
+ }
+ }
+
err = rx8025_init_client(client);
if (err)
return err;
--
2.30.1
next prev parent reply other threads:[~2021-07-09 4:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-09 4:45 [PATCH v2 0/2] rtc: Implement support for EPSON RX-8035 Mathew McBride
2021-07-09 4:45 ` Mathew McBride [this message]
2021-07-19 8:15 ` [PATCH v2 1/2] rtc: rx8025: implement RX-8035 support Nobuhiro Iwamatsu
2021-07-09 4:45 ` [PATCH v2 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035 Mathew McBride
2021-07-14 23:15 ` Rob Herring
2021-07-19 8:18 ` Nobuhiro Iwamatsu
2021-08-17 22:08 ` [PATCH v2 0/2] rtc: Implement support for EPSON RX-8035 Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210709044518.28769-2-matt@traverse.com.au \
--to=matt@traverse.com.au \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).