archive mirror
 help / color / mirror / Atom feed
From: Javier Carrasco <>
To: Alessandro Zummo <>,
	 Alexandre Belloni <>,
	 Rob Herring <>,
	 Krzysztof Kozlowski <>,
	 Conor Dooley <>
	 Javier Carrasco <>
Subject: [PATCH 0/2] rtc: pcf85363: add support for high-impedance output
Date: Wed, 25 Oct 2023 18:21:53 +0200	[thread overview]
Message-ID: <> (raw)

This series adds support for the high-impedance (hi-Z) output mode. The
current implementation only allows two output modes: output clock
(default) and interrupt. In cases where the output is only used in
low-power modes as a clock source for other devices (PMU, PMIC, etc)
or the output is not needed at all, the hi-Z can be used to reduce power

To model the hi-Z output, a new property "hiz-output" has been added and
the following cases have been taken into account:
- hiz-output = enabled: the output is not available in the design and
  must be kept in high-impedance mode.
- hiz-output = sleep: the output is only required in sleep (low-power)
- hiz-output = disabled (default): for the sake of completion, this mode
  ignores the hiz-output altogether and acts as if the property was not

Any other value will trigger a dev_warn and the default value (disabled)
will be used as it is done with other non-mandatory properties.

Signed-off-by: Javier Carrasco <>
Javier Carrasco (2):
      rtc: pcf85363: add support for high-impedance output
      dt-bindings: rtc: nxp,pcf8563: add hiz-output property

 .../devicetree/bindings/rtc/nxp,pcf85363.yaml      | 14 +++++
 drivers/rtc/rtc-pcf85363.c                         | 62 +++++++++++++++++++++-
 2 files changed, 75 insertions(+), 1 deletion(-)
base-commit: cfb67623ce281e045ec11e3eddb1b68b879b53a1
change-id: 20231024-topic-pcf85363_hiz_output-d9c3c1f5ae59

Best regards,
Javier Carrasco <>

             reply	other threads:[~2023-10-25 16:22 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-25 16:21 Javier Carrasco [this message]
2023-10-25 16:21 ` [PATCH 1/2] rtc: pcf85363: add support for high-impedance output Javier Carrasco
2023-10-25 16:21 ` [PATCH 2/2] dt-bindings: rtc: nxp,pcf8563: add hiz-output property Javier Carrasco
2023-10-25 22:23   ` Alexandre Belloni
2023-10-25 22:30     ` Javier Carrasco
2023-10-25 23:23       ` Javier Carrasco
2023-10-26  0:50         ` Alexandre Belloni
2023-10-26  9:41           ` Javier Carrasco
2023-10-26  9:56             ` Alexandre Belloni
2023-10-26 10:13               ` Javier Carrasco
2023-10-26 10:21                 ` Alexandre Belloni
2023-10-26 10:35                   ` Javier Carrasco
2024-01-30 21:34               ` Javier Carrasco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).