linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/2] rtc: pcf85363: add support for high-impedance output
@ 2023-10-25 16:21 Javier Carrasco
  2023-10-25 16:21 ` [PATCH 1/2] " Javier Carrasco
  2023-10-25 16:21 ` [PATCH 2/2] dt-bindings: rtc: nxp,pcf8563: add hiz-output property Javier Carrasco
  0 siblings, 2 replies; 13+ messages in thread
From: Javier Carrasco @ 2023-10-25 16:21 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: linux-rtc, linux-kernel, devicetree, Javier Carrasco

This series adds support for the high-impedance (hi-Z) output mode. The
current implementation only allows two output modes: output clock
(default) and interrupt. In cases where the output is only used in
low-power modes as a clock source for other devices (PMU, PMIC, etc)
or the output is not needed at all, the hi-Z can be used to reduce power
consumption.

To model the hi-Z output, a new property "hiz-output" has been added and
the following cases have been taken into account:
- hiz-output = enabled: the output is not available in the design and
  must be kept in high-impedance mode.
- hiz-output = sleep: the output is only required in sleep (low-power)
  mode.
- hiz-output = disabled (default): for the sake of completion, this mode
  ignores the hiz-output altogether and acts as if the property was not
  defined.

Any other value will trigger a dev_warn and the default value (disabled)
will be used as it is done with other non-mandatory properties.

Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
---
Javier Carrasco (2):
      rtc: pcf85363: add support for high-impedance output
      dt-bindings: rtc: nxp,pcf8563: add hiz-output property

 .../devicetree/bindings/rtc/nxp,pcf85363.yaml      | 14 +++++
 drivers/rtc/rtc-pcf85363.c                         | 62 +++++++++++++++++++++-
 2 files changed, 75 insertions(+), 1 deletion(-)
---
base-commit: cfb67623ce281e045ec11e3eddb1b68b879b53a1
change-id: 20231024-topic-pcf85363_hiz_output-d9c3c1f5ae59

Best regards,
-- 
Javier Carrasco <javier.carrasco@wolfvision.net>


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2024-01-30 21:34 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-25 16:21 [PATCH 0/2] rtc: pcf85363: add support for high-impedance output Javier Carrasco
2023-10-25 16:21 ` [PATCH 1/2] " Javier Carrasco
2023-10-25 16:21 ` [PATCH 2/2] dt-bindings: rtc: nxp,pcf8563: add hiz-output property Javier Carrasco
2023-10-25 22:23   ` Alexandre Belloni
2023-10-25 22:30     ` Javier Carrasco
2023-10-25 23:23       ` Javier Carrasco
2023-10-26  0:50         ` Alexandre Belloni
2023-10-26  9:41           ` Javier Carrasco
2023-10-26  9:56             ` Alexandre Belloni
2023-10-26 10:13               ` Javier Carrasco
2023-10-26 10:21                 ` Alexandre Belloni
2023-10-26 10:35                   ` Javier Carrasco
2024-01-30 21:34               ` Javier Carrasco

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).