linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Josua Mayer <josua@solid-run.com>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Yazan Shhady <yazan.shhady@solid-run.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org
Subject: Re: [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml
Date: Sat, 3 Feb 2024 15:10:50 +0000	[thread overview]
Message-ID: <20240203-tummy-egomaniac-5aba55889a83@spud> (raw)
In-Reply-To: <20240203-prolonged-backfield-c659e0016d70@spud>

[-- Attachment #1: Type: text/plain, Size: 3375 bytes --]

On Sat, Feb 03, 2024 at 03:08:59PM +0000, Conor Dooley wrote:
> Hey,
> 
> On Fri, Feb 02, 2024 at 05:10:49PM +0100, Josua Mayer wrote:
> > Convert the abracon abx80x rtc text bindings to dt-schema format.
> > 
> > In addition to the text description reference generic interrupts
> > properties and add an example.
> > 
> > Signed-off-by: Josua Mayer <josua@solid-run.com>
> > ---
> >  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ---------
> >  .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 74 ++++++++++++++++++++++
> >  2 files changed, 74 insertions(+), 31 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> > deleted file mode 100644
> > index 2405e35a1bc0..000000000000
> > --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> > +++ /dev/null
> > @@ -1,31 +0,0 @@
> > -Abracon ABX80X I2C ultra low power RTC/Alarm chip
> > -
> > -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> > -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> > -is the superset of ab180x.
> > -
> > -Required properties:
> > -
> > - - "compatible": should one of:
> > -        "abracon,abx80x"
> > -        "abracon,ab0801"
> > -        "abracon,ab0803"
> > -        "abracon,ab0804"
> > -        "abracon,ab0805"
> > -        "abracon,ab1801"
> > -        "abracon,ab1803"
> > -        "abracon,ab1804"
> > -        "abracon,ab1805"
> > -        "microcrystal,rv1805"
> > -	Using "abracon,abx80x" will enable chip autodetection.
> > - - "reg": I2C bus address of the device
> > -
> > -Optional properties:
> > -
> > -The abx804 and abx805 have a trickle charger that is able to charge the
> > -connected battery or supercap. Both the following properties have to be defined
> > -and valid to enable charging:
> > -
> > - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> > - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> > -                          resistor, the other values are in kOhm.
> > diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> > new file mode 100644
> > index 000000000000..405b386a54b0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> > @@ -0,0 +1,74 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
> > +
> > +maintainers:
> > +  - devicetree@vger.kernel.org
> 
> Ideally you put someone here, not the DT list. Usually the original
> author is a good choice, which I think happens to be the subsystem
> maintainer... Failing that, the rtc subsystem list is likely a better
> choice than the DT one.
> 
> > +
> > +allOf:
> > +  - $ref: rtc.yaml#
> 
> > +  - $ref: /schemas/interrupts.yaml#
> 
> This should not be need.

Ahh I now realise what your intent was here. All you need to do is add
| interrupts:
|   maxItems: 1
to your binding and it should do what you're looking for.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2024-02-03 15:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-02 16:10 [PATCH v4 0/5] arm64: dts: add description for solidrun am642 som and hummingboard evb Josua Mayer
2024-02-02 16:10 ` [PATCH v4 1/5] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T Josua Mayer
2024-02-02 16:10 ` [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml Josua Mayer
2024-02-02 17:35   ` Rob Herring
2024-02-03 15:08   ` Conor Dooley
2024-02-03 15:10     ` Conor Dooley [this message]
2024-02-06 14:44       ` Josua Mayer
2024-02-07 16:22         ` Conor Dooley
2024-02-11 14:57     ` Josua Mayer
2024-02-02 16:10 ` [PATCH v4 3/5] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes Josua Mayer
2024-02-02 16:10 ` [PATCH v4 4/5] arm64: dts: add description for solidrun am642 som and evaluation board Josua Mayer
2024-02-02 17:09   ` Andrew Davis
2024-02-06 14:41     ` Josua Mayer
2024-02-02 16:10 ` [PATCH v4 5/5] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 Josua Mayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240203-tummy-egomaniac-5aba55889a83@spud \
    --to=conor@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=josua@solid-run.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=yazan.shhady@solid-run.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).