linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
To: alexandre.belloni@bootlin.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	paul.walmsley@sifive.com, palmer@dabbelt.com,
	aou@eecs.berkeley.edu
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, dlan@gentoo.org,
	inochiama@outlook.com, Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Subject: [PATCH v8 0/2] riscv: rtc: sophgo: add rtc support for CV1800
Date: Sun,  4 Feb 2024 12:41:41 +0800	[thread overview]
Message-ID: <20240204044143.415915-1-qiujingbao.dlmu@gmail.com> (raw)

Real Time Clock (RTC) is an independently powered module
within the chip, which includes a 32KHz oscillator and
a Power On Reset/POR submodule. It can be used for time
display and timed alarm generation.

Power On Reset/POR submodule only using register resources
so it should be empty. The 32KHz oscillator only provides
pulses for RTC in hardware.

Changes since v7:
- pass checkpatch.pl --strict
- using u32 replace uint32
- using devm_kzalloc(*) replace
  devm_kzalloc(sizeof())
- sort header files alphabetically
- delete unnecessary header files
- fix wrap error
- drop dependent description
- using hardware automatic calibration replace
  software calibration. see documentation 197 page

v7: https://lore.kernel.org/all/20240122080500.2621-1-qiujingbao.dlmu@gmail.com/
documentation: https://github.com/milkv-duo/duo-files/blob/main/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf

Changes since v6:
- completely delete POR dt node
- remove syscon tag
- use devm_regmap_init_mmio() replace
  syscon_node_to_regmap

v6: https://lore.kernel.org/all/20240115160600.5444-1-qiujingbao.dlmu@gmail.com/

Changes since v5:
- remove unnecessary lock
- fix cv1800_rtc_alarm_irq_enable()
- remove duplicate checks
- using alrm->enabled instead of unconditionally
  enabling
- remove disable alarms on probe
- using rtc_update_irq() replace mess of alarm
- remove leak clk
- useing devm_rtc_allocate_device() and
  devm_rtc_register_device() instead old way
- add judgment for rtc_enable_sec_counter()
- add POR nodes in DTS. This POR device shares
  the register region with the RTC device

v5: https://lore.kernel.org/all/20240108072253.30183-1-qiujingbao.dlmu@gmail.com/

Changes since v4:
- remove POR dt-bindings because it empty
- remove MFD dt-bindings because SoC does
  not have MFDs
- add syscon attribute to share registers
  with POR

v4: https://lore.kernel.org/all/20231229090643.116575-1-qiujingbao.dlmu@gmail.com/

Changes since v3:
- temporarily not submitting RTC driver code
  waiting for communication with IC designer
- add MFD dt-bindings
- add POR dt-bindings

v3: https://lore.kernel.org/all/20231226100431.331616-1-qiujingbao.dlmu@gmail.com/

Changes since v2:
- add mfd support for CV1800
- add rtc to mfd
- using regmap replace iomap
- merge register address in dts

v2: https://lore.kernel.org/lkml/20231217110952.78784-1-qiujingbao.dlmu@gmail.com/

Changes since v1
- fix duplicate names in subject
- using RTC replace RTC controller
- improve the properties of dt-bindings
- using `unevaluatedProperties` replace `additionalProperties`
- dt-bindings passed the test
- using `devm_platform_ioremap_resource()` replace
  `platform_get_resource()` and `devm_ioremap_resource()`
- fix random order of the code
- fix wrong wrapping of the `devm_request_irq()` and map the flag with dts
- using devm_clk_get_enabled replace `devm_clk_get()` and
  `clk_prepare_enable()`
- fix return style
- add rtc clock calibration function
- use spinlock when write register on read/set time

v1: https://lore.kernel.org/lkml/20231121094642.2973795-1-qiujingbao.dlmu@gmail.com/

Jingbao Qiu (2):
  dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC
  rtc: sophgo: add rtc support for Sophgo CV1800 SoC

 .../bindings/rtc/sophgo,cv1800-rtc.yaml       |  53 ++++
 drivers/rtc/Kconfig                           |  10 +
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-cv1800.c                      | 244 ++++++++++++++++++
 4 files changed, 308 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml
 create mode 100644 drivers/rtc/rtc-cv1800.c


base-commit: 14688f1a91e1f37bc6bf50ff5241e857f24338e0
-- 
2.25.1


             reply	other threads:[~2024-02-04  4:41 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-04  4:41 Jingbao Qiu [this message]
2024-02-04  4:41 ` [PATCH v8 1/2] dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC Jingbao Qiu
2024-02-04  4:41 ` [PATCH v8 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC Jingbao Qiu
2024-03-05 10:25   ` Jingbao Qiu
2024-04-17 21:23   ` Alexandre Belloni
2024-04-24  7:35     ` Jingbao Qiu
2024-05-01  2:19   ` Inochi Amaoto
2024-05-01  5:03     ` Jingbao Qiu
2024-05-01  7:43       ` Inochi Amaoto
2024-05-01  9:14         ` Jingbao Qiu
2024-05-01 11:20           ` Alexandre Belloni
2024-05-02  7:39             ` Jingbao Qiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240204044143.415915-1-qiujingbao.dlmu@gmail.com \
    --to=qiujingbao.dlmu@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=inochiama@outlook.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).