From: Matthias Brugger <matthias.bgg@gmail.com>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Eddie Huang <eddie.huang@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Nicolas Boichat <drinkcat@chromium.org>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>,
Fei Shao <fshao@chromium.org>, Ran Bi <ran.bi@mediatek.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-rtc@vger.kernel.org, srv_heupstream@mediatek.com,
Project_Global_Chrome_Upstream_Group@mediatek.com,
Wen Su <wen.su@mediatek.com>
Subject: Re: [PATCH v6 8/8] arm64: dts: mt6359: add PMIC MT6359 related nodes
Date: Mon, 29 Mar 2021 17:24:40 +0200 [thread overview]
Message-ID: <54050d27-49f1-1c62-49d7-66b761fbb450@gmail.com> (raw)
In-Reply-To: <1615829757-3223-9-git-send-email-hsin-hsiung.wang@mediatek.com>
On 15/03/2021 18:35, Hsin-Hsiung Wang wrote:
> From: Wen Su <wen.su@mediatek.com>
>
> add PMIC MT6359 related nodes which is for MT6779 platform
>
> Signed-off-by: Wen Su <wen.su@mediatek.com>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> changes since v5:
> - update file date.
> ---
> arch/arm64/boot/dts/mediatek/mt6359.dtsi | 298 ++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 1 +
> 2 files changed, 299 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6359.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> new file mode 100644
> index 000000000000..84235db460f8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> @@ -0,0 +1,298 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + */
> +
> +&pwrap {
> + pmic: pmic {
> + compatible = "mediatek,mt6359";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + mt6359codec: mt6359codec {
> + };
> +
> + mt6359regulator: regulators {
should be just:
regulators {
Other than that looks good to me.
Regards,
Matthias
> + mt6359_vs1_buck_reg: buck_vs1 {
> + regulator-name = "vs1";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> + mt6359_vgpu11_buck_reg: buck_vgpu11 {
> + regulator-name = "vgpu11";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vmodem_buck_reg: buck_vmodem {
> + regulator-name = "vmodem";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-ramp-delay = <10760>;
> + regulator-enable-ramp-delay = <200>;
> + };
> + mt6359_vpu_buck_reg: buck_vpu {
> + regulator-name = "vpu";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vcore_buck_reg: buck_vcore {
> + regulator-name = "vcore";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vs2_buck_reg: buck_vs2 {
> + regulator-name = "vs2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1600000>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> + mt6359_vpa_buck_reg: buck_vpa {
> + regulator-name = "vpa";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <3650000>;
> + regulator-enable-ramp-delay = <300>;
> + };
> + mt6359_vproc2_buck_reg: buck_vproc2 {
> + regulator-name = "vproc2";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vproc1_buck_reg: buck_vproc1 {
> + regulator-name = "vproc1";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
> + regulator-name = "vcore_sshub";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + };
> + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
> + regulator-name = "vgpu11_sshub";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + };
> + mt6359_vaud18_ldo_reg: ldo_vaud18 {
> + regulator-name = "vaud18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vsim1_ldo_reg: ldo_vsim1 {
> + regulator-name = "vsim1";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + };
> + mt6359_vibr_ldo_reg: ldo_vibr {
> + regulator-name = "vibr";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vrf12_ldo_reg: ldo_vrf12 {
> + regulator-name = "vrf12";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + };
> + mt6359_vusb_ldo_reg: ldo_vusb {
> + regulator-name = "vusb";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <960>;
> + regulator-always-on;
> + };
> + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> + regulator-name = "vsram_proc2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vio18_ldo_reg: ldo_vio18 {
> + regulator-name = "vio18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-enable-ramp-delay = <960>;
> + regulator-always-on;
> + };
> + mt6359_vcamio_ldo_reg: ldo_vcamio {
> + regulator-name = "vcamio";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + mt6359_vcn18_ldo_reg: ldo_vcn18 {
> + regulator-name = "vcn18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vfe28_ldo_reg: ldo_vfe28 {
> + regulator-name = "vfe28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> + mt6359_vcn13_ldo_reg: ldo_vcn13 {
> + regulator-name = "vcn13";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + };
> + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
> + regulator-name = "vcn33_1_bt";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
> + regulator-name = "vcn33_1_wifi";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vaux18_ldo_reg: ldo_vaux18 {
> + regulator-name = "vaux18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vsram_others_ldo_reg: ldo_vsram_others {
> + regulator-name = "vsram_others";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vefuse_ldo_reg: ldo_vefuse {
> + regulator-name = "vefuse";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <2000000>;
> + };
> + mt6359_vxo22_ldo_reg: ldo_vxo22 {
> + regulator-name = "vxo22";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-always-on;
> + };
> + mt6359_vrfck_ldo_reg: ldo_vrfck {
> + regulator-name = "vrfck";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1700000>;
> + };
> + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
> + regulator-name = "vrfck";
> + regulator-min-microvolt = <1240000>;
> + regulator-max-microvolt = <1600000>;
> + };
> + mt6359_vbif28_ldo_reg: ldo_vbif28 {
> + regulator-name = "vbif28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vio28_ldo_reg: ldo_vio28 {
> + regulator-name = "vio28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + mt6359_vemc_ldo_reg: ldo_vemc {
> + regulator-name = "vemc";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
> + regulator-name = "vemc";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
> + regulator-name = "vcn33_2_bt";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
> + regulator-name = "vcn33_2_wifi";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_va12_ldo_reg: ldo_va12 {
> + regulator-name = "va12";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + };
> + mt6359_va09_ldo_reg: ldo_va09 {
> + regulator-name = "va09";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + mt6359_vrf18_ldo_reg: ldo_vrf18 {
> + regulator-name = "vrf18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1810000>;
> + };
> + mt6359_vsram_md_ldo_reg: ldo_vsram_md {
> + regulator-name = "vsram_md";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <10760>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vufs_ldo_reg: ldo_vufs {
> + regulator-name = "vufs";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + mt6359_vm18_ldo_reg: ldo_vm18 {
> + regulator-name = "vm18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-always-on;
> + };
> + mt6359_vbbck_ldo_reg: ldo_vbbck {
> + regulator-name = "vbbck";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
> + regulator-name = "vsram_proc1";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vsim2_ldo_reg: ldo_vsim2 {
> + regulator-name = "vsim2";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + };
> + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
> + regulator-name = "vsram_others_sshub";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + };
> + };
> +
> + mt6359rtc: mt6359rtc {
> + compatible = "mediatek,mt6358-rtc";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> index 0205837fa698..808be492e970 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> @@ -5,6 +5,7 @@
> */
> /dts-v1/;
> #include "mt8192.dtsi"
> +#include "mt6359.dtsi"
>
> / {
> model = "MediaTek MT8192 evaluation board";
>
next prev parent reply other threads:[~2021-03-29 15:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 17:35 [PATCH v6 0/8] Add Support for MediaTek PMIC MT6359 Hsin-Hsiung Wang
2021-03-15 17:35 ` [PATCH v6 1/8] mfd: mt6358: refine interrupt code Hsin-Hsiung Wang
2021-03-15 17:35 ` [PATCH v6 2/8] rtc: mt6397: refine RTC_TC_MTH Hsin-Hsiung Wang
2021-03-15 17:35 ` [PATCH v6 3/8] dt-bindings: mfd: Add compatible for the MediaTek MT6359 PMIC Hsin-Hsiung Wang
2021-03-15 17:35 ` [PATCH v6 4/8] dt-bindings: regulator: Add document for MT6359 regulator Hsin-Hsiung Wang
2021-03-16 17:54 ` Rob Herring
2021-03-16 21:28 ` Rob Herring
2021-03-17 6:01 ` Hsin-hsiung Wang
2021-03-29 11:13 ` Hsin-hsiung Wang
2021-03-15 17:35 ` [PATCH v6 5/8] mfd: Add support for the MediaTek MT6359 PMIC Hsin-Hsiung Wang
2021-03-15 17:35 ` [PATCH v6 6/8] regulator: mt6359: Add support for MT6359 regulator Hsin-Hsiung Wang
2021-03-16 17:52 ` Mark Brown
2021-03-15 17:35 ` [PATCH v6 7/8] regulator: mt6359: Add support for MT6359P regulator Hsin-Hsiung Wang
2021-03-16 17:52 ` Mark Brown
2021-03-15 17:35 ` [PATCH v6 8/8] arm64: dts: mt6359: add PMIC MT6359 related nodes Hsin-Hsiung Wang
2021-03-29 15:24 ` Matthias Brugger [this message]
2021-03-30 2:40 ` Hsin-hsiung Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54050d27-49f1-1c62-49d7-66b761fbb450@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=eddie.huang@mediatek.com \
--cc=fshao@chromium.org \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=ran.bi@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=wen.su@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).