Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
[PATCH v5 00/10] Add Support for MediaTek PMIC MT6358
 2019-08-23  3:45 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v5 02/10] mfd: mt6397: extract irq related code from core driver
` [PATCH v5 03/10] mfd: mt6397: modify suspend/resume behavior
` [PATCH v5 05/10] regulator: Add document for MT6358 regulator
` [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC
` [PATCH v5 07/10] regulator: mt6358: Add support for MT6358 regulator
` [PATCH v5 10/10] rtc: mt6397: Add support for the MediaTek MT6358 RTC

[PATCH v1 0/2] x86/rtc: Add option to skip using RTC
 2019-08-23  3:37 UTC  (10+ messages) - mbox.gz / Atom
  ` [PATCH v1 1/2] "
  ` [PATCH v1 2/2] dt-bindings: rtc: Add optional status property

[PATCH v4 00/10] Add Support for MediaTek PMIC MT6358
 2019-08-23  1:57 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v4 06/10] mfd: Add support for the MediaTek MT6358 PMIC

[PATCH v3 1/5] rtc: pcf2127: convert to devm_rtc_allocate_device
 2019-08-22 21:29 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v3 2/5] rtc: pcf2127: cleanup register and bit defines
` [PATCH v3 3/5] rtc: pcf2127: bugfix: read rtc disables watchdog
` [PATCH v3 4/5] rtc: pcf2127: add watchdog feature support
` [PATCH v3 5/5] rtc: pcf2127: add tamper detection support

[PATCH v2 0/3] Add basic support for RTC on Allwinner H6 SoC
 2019-08-22 21:16 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v2 1/3] dt-bindings: Add compatible for H6 RTC
` [PATCH v2 2/3] rtc: sun6i: Add support "
` [PATCH v2 3/3] arm64: dts: sun50i-h6: Add support for RTC and fix the clock tree

[v7,1/2] rtc/fsl: add FTM alarm driver as the wakeup source
 2019-08-22 21:12 UTC  (4+ messages) - mbox.gz / Atom
` [v7,2/2] dt-bindings: rtc: add bindings for FlexTimer Module

[PATCH v3 0/2] rtc: add new Amlogic Virtual Wake RTC
 2019-08-22 21:11 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v3 1/2] dt-bindings: rtc: new binding for Amlogic VRTC
` [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC

[PATCH v2 0/4] Add Support for MediaTek MT2712 RTC
 2019-08-22 13:36 UTC  (13+ messages) - mbox.gz / Atom
` [PATCH v2 1/4] bindings: rtc: add bindings for "
` [PATCH v2 2/4] rtc: Add support for the MediaTek "

[RESEND PATCH 1/1] rtc: sun6i: Allow using as wakeup source from suspend
 2019-08-21 21:00 UTC  - mbox.gz / Atom

[PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers
 2019-08-21 20:37 UTC  (28+ messages) - mbox.gz / Atom
` [PATCH v5 01/17] w1: add 1-wire master driver for IP block found in SGI ASICs
` [PATCH v5 02/17] w1: add DS2501, DS2502, DS2505 EPROM device driver
` [PATCH v5 03/17] nvmem: core: add nvmem_device_find
` [PATCH v5 04/17] MIPS: PCI: refactor ioc3 special handling
` [PATCH v5 05/17] MIPS: PCI: use information from 1-wire PROM for IOC3 detection
` [PATCH v5 06/17] MIPS: SGI-IP27: remove ioc3 ethernet init
` [PATCH v5 07/17] MIPS: SGI-IP27: restructure ioc3 register access
` [PATCH v5 08/17] net: sgi: ioc3-eth: remove checkpatch errors/warning
` [PATCH v5 09/17] net: sgi: ioc3-eth: use defines for constants dealing with desc rings
` [PATCH v5 10/17] net: sgi: ioc3-eth: rework skb rx handling
` [PATCH v5 11/17] net: sgi: ioc3-eth: no need to stop queue set_multicast_list
` [PATCH v5 12/17] net: sgi: ioc3-eth: use dma-direct for dma allocations
` [PATCH v5 13/17] net: sgi: ioc3-eth: use csum_fold
` [PATCH v5 14/17] net: sgi: ioc3-eth: Fix IPG settings
` [PATCH v5 15/17] mfd: ioc3: Add driver for SGI IOC3 chip
` [PATCH v5 16/17] MIPS: SGI-IP27: fix readb/writeb addressing
` [PATCH v5 17/17] Input: add IOC3 serio driver

[PATCH v4 0/9] Use MFD framework for SGI IOC3 drivers
 2019-08-21 12:48 UTC  (21+ messages) - mbox.gz / Atom
` [PATCH v4 3/9] nvmem: core: add nvmem_device_find
` [PATCH v4 8/9] MIPS: SGI-IP27: fix readb/writeb addressing
` [PATCH v4 9/9] Input: add IOC3 serio driver
  ` [PATCH v4 7/9] mfd: ioc3: Add driver for SGI IOC3 chip

[v2] rtc: pcf85363/pcf85263: fix error that failed to run hwclock -w
 2019-08-21 11:47 UTC  (13+ messages) - mbox.gz / Atom

[PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2
 2019-08-20 19:49 UTC  (18+ messages) - mbox.gz / Atom
` [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths
` [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323
` [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller
` [PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc
` [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h
` [PATCH v6 06/13] mfd: mt6397: add mutex include
` [PATCH v6 07/13] rtc: mt6397: improvements of rtc driver
` [PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core
` [PATCH v6 09/13] rtc: mt6397: add compatible for mt6323
` [PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc
` [PATCH v6 11/13] power: reset: add driver for mt6323 poweroff
` [PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers
` [PATCH v6 13/13] arm: dts: mt6323: add keys, power-controller, rtc and codec

[PATCH] rtc: rv3029: Revert my error handling patch to rv3029_eeprom_write()
 2019-08-20 19:47 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 0/2] rtc: convert two drivers to devm_i2c_new_dummy_device()
 2019-08-20 15:42 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 1/2] rtc: max77686: convert "
` [PATCH 2/2] rtc: s35390a: "

[PATCH v3 1/9] rtc: pcf2123: don't use weekday alarm
 2019-08-19 18:26 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v3 2/9] rtc; pcf2123: fix possible alarm race condition
` [PATCH v3 3/9] rtc: pcf2123: implement .alarm_irq_enable
` [PATCH v3 4/9] rtc: pcf2123: stop using dev.platform_data
` [PATCH v3 5/9] rtc: pcf2123: rename struct and variables
` [PATCH v3 6/9] rtc: pcf2123: remove useless error path goto
` [PATCH v3 7/9] rtc: pcf2123: convert to devm_rtc_allocate_device
` [PATCH v3 8/9] rtc: pcf2123: let the core handle range offsetting
` [PATCH v3 9/9] rtc: pcf2123: add proper compatible string

[PATCH 0/4] Followup to "Make clk_hw::init NULL after clk registration"
 2019-08-19  7:02 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 3/4] rtc: sun6i: Don't reference clk_init_data after registration

[PATCH 1/2] rtc: class: add debug message when registration fails
 2019-08-18 22:00 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH 2/2] rtc: remove superfluous error message

[PATCH] rtc: ds1672: remove unnecessary check
 2019-08-18 21:52 UTC  - mbox.gz / Atom

rtc: pcf85363/pcf85263: fix error that failed to run hwclock -w
 2019-08-16  2:40 UTC  (7+ messages) - mbox.gz / Atom
  ` [EXT] "

[PATCH v5 00/18] compat_ioctl.c removal, part 2/3
 2019-08-15 18:10 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v5 06/18] compat_ioctl: move WDIOC handling into wdt drivers

[PATCH v2 1/9] rtc: pcf2123: stop using dev.platform_data
 2019-08-14 15:10 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v2 2/9] rtc: pcf2123: rename struct and variables
` [PATCH v2 3/9] rtc: pcf2123: remove useless error path goto
` [PATCH v2 4/9] rtc: pcf2123: convert to devm_rtc_allocate_device
` [PATCH v2 5/9] rtc: pcf2123: let the core handle range offsetting
` [PATCH v2 6/9] rtc: pcf2123: don't use weekday alarm
` [PATCH v2 7/9] rtc; pcf2123: fix possible alarm race condition
` [PATCH v2 8/9] rtc: pcf2123: implement .alarm_irq_enable
` [PATCH v2 9/9] rtc: pcf2123: add proper compatible string

[PATCH v2 0/5] rtc: pcf2127: tamper timestamp and watchdog feature support
 2019-08-14 13:34 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v2 1/5] rtc: pcf2127: convert to devm_rtc_allocate_device
` [PATCH v2 2/5] rtc: pcf2127: cleanup register and bit defines
` [PATCH v2 3/5] rtc: pcf2127: bugfix: read rtc disables watchdog
` [PATCH v2 4/5] rtc: pcf2127: add watchdog feature support
` [PATCH v2 5/5] rtc: pcf2127: add tamper detection support

[PATCH v5 00/10] implement poweroff for mt6323 / bpi-r2
 2019-08-13 15:25 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH v5 01/10] dt-bindings: add powercontroller
` [PATCH v5 02/10] dt-bindings: add missing mt6397 rtc
` [PATCH v5 03/10] rtc: mt6397: move some common definitions into rtc.h
` [PATCH v5 08/10] power: reset: add driver for mt6323 poweroff
` [PATCH v5 09/10] MAINTAINERS: add Mediatek shutdown drivers

[PATCH] rtc: snvs: fix possible race condition
 2019-08-13  9:22 UTC  (9+ messages) - mbox.gz / Atom

[PATCH v6 39/57] rtc: Remove dev_err() usage after platform_get_irq()
 2019-08-13  8:53 UTC  (2+ messages) - mbox.gz / Atom

[v6,1/2] rtc/fsl: add FTM alarm driver as the wakeup source
 2019-08-13  2:59 UTC  (4+ messages) - mbox.gz / Atom
` [v6,2/2] dt-bindings: rtc: add bindings for FlexTimer Module
    ` [EXT] "

[PATCH v2 0/2] rtc: add new Amlogic Virtual Wake RTC
 2019-08-12 23:21 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 2/2] rtc: Add "

[PATCH] rtc: mxc: use spin_lock_irqsave instead of spin_lock_irq in IRQ context
 2019-08-12 21:04 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] rtc: bd70528: fix driver dependencies
 2019-08-12 21:02 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 14/16] rtc: remove w90x900/nuc900 driver
 2019-08-12 20:57 UTC  (2+ messages) - mbox.gz / Atom

page:   latest

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org linux-rtc@archiver.kernel.org
	public-inbox-index linux-rtc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox